| View previous topic :: View next topic |
| Author |
Message |
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
 Posted: Wed Jul 07, 2004 5:41 pm Post subject: |
 |
|
Nothing in firefox it just says starting and with wget it cant get it either  I cant even ping it! When i try nothing happens!
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
 |
Zyne
Guru
Joined: 08 Jun 2004
Posts: 334
|
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Wed Jul 07, 2004 5:45 pm Post subject: |
|
|
Thanx Very Much cause it worked grabbing it from you! Now im gonna have a nice compiling time  thanx again!!
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
JOS654
Tux's lil' helper
Joined: 15 Nov 2003
Posts: 101
Location: Spain - Malaga
|
| Posted: Wed Jul 07, 2004 5:45 pm Post subject: |
|
|
the patch fixed the usb thx all 
Linux Narsil 2.6.7-love7 #3 SMP Wed Jul 7 19:39:51 UTC 2004 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux |
|
| Back to top |
|
|
boroshan
l33t
Joined: 16 Apr 2003
Posts: 730
Location: upside down
|
| Posted: Wed Jul 07, 2004 5:48 pm Post subject: Re: bootsplash |
|
|
| ryszardzonk wrote: | boroshan
in my /etc/lilo.conf exept the usual stuff I have
video=vesafb:ywrap,vram:16,1024x768-16@85 splash=silent
initrd=/boot/initrd-1024x768
do not put vga=791 or vga=... at all as it is not nessesery [/code] |
mmm... I've been using
| Code: | kernel /kernel-2.6.7-love7 root=/dev/hdb8 video=vesafb:ywrap,mtrr vga=794 elevator=cfq rootflags=nopseudo splash=silent
|
So I guess I'm a little out of date. I'll try that then 
| ryszardzonk wrote: | and goodluck
 |
Thanks
_________________
Don't let THEM immanentize the Eschaton! |
|
| Back to top |
|
|
Pink
Veteran
Joined: 24 Jul 2003
Posts: 1062
|
| Posted: Wed Jul 07, 2004 5:59 pm Post subject: |
|
|
| Robin79 wrote: | Nothing in firefox it just says starting and with wget it cant get it either I cant even ping it! When i try nothing happens!
|
Of course it drops the ping, that's the first basic item of security.
interesting though, wget works here, I really would check your ip settings in your kernel.
At least you've got it now |
|
| Back to top |
|
|
JOS654
Tux's lil' helper
Joined: 15 Nov 2003
Posts: 101
Location: Spain - Malaga
|
| Posted: Wed Jul 07, 2004 6:00 pm Post subject: |
|
|
erm what does this parameter? |
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Wed Jul 07, 2004 6:11 pm Post subject: |
|
|
After a reboot it works to download from you my stupid brother has possiblie done something (as usual) So their isnt any probs anymore
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
boroshan
l33t
Joined: 16 Apr 2003
Posts: 730
Location: upside down
|
| Posted: Wed Jul 07, 2004 6:13 pm Post subject: |
|
|
| JOS654 wrote: |
erm what does this parameter? |
Changes the scheduler to use to CFQ algorithm in its elevator. CFQ means "controlled fair queueing". Ask someone else about the use of the work "elevator" in this context.
I use it 'cos it seems to work better on my box than the defaults. All very subjective mind.
_________________
Don't let THEM immanentize the Eschaton! |
|
| Back to top |
|
|
Zyne
Guru
Joined: 08 Jun 2004
Posts: 334
|
| Posted: Wed Jul 07, 2004 6:36 pm Post subject: |
|
|
well... I still seem to be having quite a few problems with my SATA.
I tried using my old .config, and tried compiling the love-sources back from scratch, and I'm still stuck at the same problem. My sata devices don't get added to the devices list (/dev/hde and /dev/hdg)
I just unmerged the love-sources just because they're of no use to me like this. My main hd (root) is PATA, but my data disks are SATA, and I can't work without those...
my hardware: ASUS A7N8X Deluxe M/B with sil3112A SATA chipset.
Here's the output of my /var/log/messages:
| Code: |
Jul 7 19:52:23 vubserver NFORCE2: IDE controller at PCI slot 0000:00:09.0
Jul 7 19:52:23 vubserver NFORCE2: chipset revision 162
Jul 7 19:52:23 vubserver NFORCE2: not 100% native mode: will probe irqs later
Jul 7 19:52:23 vubserver NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jul 7 19:52:23 vubserver NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Jul 7 19:52:23 vubserver ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jul 7 19:52:23 vubserver ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jul 7 19:52:23 vubserver hda: IC35L060AVVA07-0, ATA DISK drive
Jul 7 19:52:23 vubserver hdb: WDC WD200EB-00CSF0, ATA DISK drive
Jul 7 19:52:23 vubserver ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 7 19:52:23 vubserver hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
Jul 7 19:52:23 vubserver hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
Jul 7 19:52:23 vubserver ide1 at 0x170-0x177,0x376 on irq 15
Jul 7 19:52:23 vubserver hda: max request size: 128KiB
Jul 7 19:52:23 vubserver hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
Jul 7 19:52:23 vubserver hda: cache flushes supported
Jul 7 19:52:23 vubserver /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Jul 7 19:52:23 vubserver hdb: max request size: 128KiB
Jul 7 19:52:23 vubserver hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
Jul 7 19:52:23 vubserver hdb: cache flushes supported
Jul 7 19:52:23 vubserver /dev/ide/host0/bus0/target1/lun0: p1
Jul 7 19:52:23 vubserver hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Jul 7 19:52:23 vubserver Uniform CD-ROM driver Revision: 3.20
Jul 7 19:52:23 vubserver hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 7 19:52:23 vubserver libata version 1.02 loaded.
Jul 7 19:52:23 vubserver sata_sil version 0.54
Jul 7 19:52:23 vubserver ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
Jul 7 19:52:23 vubserver ata1: SATA max UDMA/100 cmd 0xF8854080 ctl 0xF885408A bmdma 0xF8854000 irq 11
Jul 7 19:52:23 vubserver ata2: SATA max UDMA/100 cmd 0xF88540C0 ctl 0xF88540CA bmdma 0xF8854008 irq 11
Jul 7 19:52:23 vubserver ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f
Jul 7 19:52:23 vubserver ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
Jul 7 19:52:23 vubserver ata1: dev 0 configured for UDMA/100
Jul 7 19:52:23 vubserver scsi0 : sata_sil
Jul 7 19:52:23 vubserver ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
Jul 7 19:52:23 vubserver ata2: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
Jul 7 19:52:23 vubserver ata2: dev 0 configured for UDMA/100
Jul 7 19:52:23 vubserver scsi1 : sata_sil
Jul 7 19:52:23 vubserver Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5
Jul 7 19:52:23 vubserver Type: Direct-Access ANSI SCSI revision: 05
Jul 7 19:52:23 vubserver Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Jul 7 19:52:23 vubserver Type: Direct-Access ANSI SCSI revision: 05
|
here's my kernel .config (only relevant snips)
| Code: |
# SCSI low-level drivers
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_QLA2XXX=y
|
relevant output of lspci:
| Code: |
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
|
looks like I'm gonna have to wait for a future release of the love-sources. |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 6:38 pm Post subject: |
|
|
| Zyne wrote: | well... I still seem to be having quite a few problems with my SATA.
I tried using my old .config, and tried compiling the love-sources back from scratch, and I'm still stuck at the same problem. My sata devices don't get added to the devices list (/dev/hde and /dev/hdg)
I just unmerged the love-sources just because they're of no use to me like this. My main hd (root) is PATA, but my data disks are SATA, and I can't work without those...
my hardware: ASUS A7N8X Deluxe M/B with sil3112A SATA chipset.
Here's the output of my /var/log/messages:
| Code: |
Jul 7 19:52:23 vubserver NFORCE2: IDE controller at PCI slot 0000:00:09.0
Jul 7 19:52:23 vubserver NFORCE2: chipset revision 162
Jul 7 19:52:23 vubserver NFORCE2: not 100% native mode: will probe irqs later
Jul 7 19:52:23 vubserver NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
Jul 7 19:52:23 vubserver NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Jul 7 19:52:23 vubserver ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Jul 7 19:52:23 vubserver ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Jul 7 19:52:23 vubserver hda: IC35L060AVVA07-0, ATA DISK drive
Jul 7 19:52:23 vubserver hdb: WDC WD200EB-00CSF0, ATA DISK drive
Jul 7 19:52:23 vubserver ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 7 19:52:23 vubserver hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
Jul 7 19:52:23 vubserver hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
Jul 7 19:52:23 vubserver ide1 at 0x170-0x177,0x376 on irq 15
Jul 7 19:52:23 vubserver hda: max request size: 128KiB
Jul 7 19:52:23 vubserver hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
Jul 7 19:52:23 vubserver hda: cache flushes supported
Jul 7 19:52:23 vubserver /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Jul 7 19:52:23 vubserver hdb: max request size: 128KiB
Jul 7 19:52:23 vubserver hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
Jul 7 19:52:23 vubserver hdb: cache flushes supported
Jul 7 19:52:23 vubserver /dev/ide/host0/bus0/target1/lun0: p1
Jul 7 19:52:23 vubserver hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Jul 7 19:52:23 vubserver Uniform CD-ROM driver Revision: 3.20
Jul 7 19:52:23 vubserver hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 7 19:52:23 vubserver libata version 1.02 loaded.
Jul 7 19:52:23 vubserver sata_sil version 0.54
Jul 7 19:52:23 vubserver ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
Jul 7 19:52:23 vubserver ata1: SATA max UDMA/100 cmd 0xF8854080 ctl 0xF885408A bmdma 0xF8854000 irq 11
Jul 7 19:52:23 vubserver ata2: SATA max UDMA/100 cmd 0xF88540C0 ctl 0xF88540CA bmdma 0xF8854008 irq 11
Jul 7 19:52:23 vubserver ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f
Jul 7 19:52:23 vubserver ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
Jul 7 19:52:23 vubserver ata1: dev 0 configured for UDMA/100
Jul 7 19:52:23 vubserver scsi0 : sata_sil
Jul 7 19:52:23 vubserver ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
Jul 7 19:52:23 vubserver ata2: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
Jul 7 19:52:23 vubserver ata2: dev 0 configured for UDMA/100
Jul 7 19:52:23 vubserver scsi1 : sata_sil
Jul 7 19:52:23 vubserver Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5
Jul 7 19:52:23 vubserver Type: Direct-Access ANSI SCSI revision: 05
Jul 7 19:52:23 vubserver Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Jul 7 19:52:23 vubserver Type: Direct-Access ANSI SCSI revision: 05
|
here's my kernel .config (only relevant snips)
| Code: |
# SCSI low-level drivers
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_QLA2XXX=y
|
relevant output of lspci:
| Code: |
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
|
looks like I'm gonna have to wait for a future release of the love-sources. |
Can you tell me what kernel works for you with SATA?
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Zyne
Guru
Joined: 08 Jun 2004
Posts: 334
|
| Posted: Wed Jul 07, 2004 6:44 pm Post subject: |
|
|
| Mafteah wrote: | | Can you tell me what kernel works for you with SATA? |
well... Unpatched 2.6.7 (what I'm running now) runs great!
I also tried 2.6.7-rc1 last week (or maybe 2 weeks ago) and that one worked great too for what I needed (no bootsplash for me)
it's actually just this one that doesn't seem to be willing to work for me. |
|
| Back to top |
|
|
Tazok
Guru
Joined: 25 Oct 2003
Posts: 310
|
| Posted: Wed Jul 07, 2004 6:45 pm Post subject: Re: bootsplash |
|
|
| ryszardzonk wrote: |
in my /etc/lilo.conf exept the usual stuff I have
video=vesafb:ywrap,vram:16,1024x768-16@85 splash=silent
initrd=/boot/initrd-1024x768
do not put vga=791 or vga=... at all as it is not nessesery [/code] |
Where does this modeline come from? Do I have to create it? |
|
| Back to top |
|
|
BNoise
n00b
Joined: 10 Feb 2003
Posts: 53
Location: Argentina
|
| Posted: Wed Jul 07, 2004 6:59 pm Post subject: |
|
|
Does nvidia-kernel works here?
love5 does segfaults the X (xorg) server. |
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Wed Jul 07, 2004 7:03 pm Post subject: |
|
|
Damm!! my 6 button creative usb mosue dosent work with this kernel and when i try to reboot usb hotplugging locks up Anyone else have this problems? Iam running 2.6.7-love 5 right now and the mouse works perfect in this one! But if anyone could help me i would be grateful!!
Thanx!!
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 7:15 pm Post subject: |
|
|
| Zyne wrote: | | Mafteah wrote: | | Can you tell me what kernel works for you with SATA? |
well... Unpatched 2.6.7 (what I'm running now) runs great!
I also tried 2.6.7-rc1 last week (or maybe 2 weeks ago) and that one worked great too for what I needed (no bootsplash for me)
it's actually just this one that doesn't seem to be willing to work for me. |
Can you try SATA with mm6?
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 7:15 pm Post subject: |
|
|
| Robin79 wrote: | Damm!! my 6 button creative usb mosue dosent work with this kernel and when i try to reboot usb hotplugging locks up Anyone else have this problems? Iam running 2.6.7-love 5 right now and the mouse works perfect in this one! But if anyone could help me i would be grateful!!
Thanx!! |
Humm try to reverse the Usb Patchs from mm6
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
ank
Apprentice
Joined: 06 Aug 2003
Posts: 185
Location: Maribor, Slovenia
|
| Posted: Wed Jul 07, 2004 7:16 pm Post subject: |
|
|
works great here
Now i will use my spare 10Gb partition for reiser4 |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 7:16 pm Post subject: |
|
|
| BNoise wrote: | Does nvidia-kernel works here?
love5 does segfaults the X (xorg) server. |
Works
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 7:17 pm Post subject: Re: bootsplash |
|
|
| Tazok wrote: | | ryszardzonk wrote: |
in my /etc/lilo.conf exept the usual stuff I have
video=vesafb:ywrap,vram:16,1024x768-16@85 splash=silent
initrd=/boot/initrd-1024x768
do not put vga=791 or vga=... at all as it is not nessesery [/code] |
Where does this modeline come from? Do I have to create it? |
vesafb-tng !
Now you can select your refresh rate for your console!
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Robin79
l33t
Joined: 18 Oct 2003
Posts: 632
Location: /home/valdemarsvik
|
| Posted: Wed Jul 07, 2004 7:19 pm Post subject: |
|
|
And how do i do that? Nice if you gave me an explenation
_________________
Gentoo 2005.0
ASUS P5AD2 Deluxe MB
Intel P4 3.2GHz
PCI-E Nvidia Geforce PCX 5750
--------------------
Registered Linux User Nr # 319050 http://counter.li.org |
|
| Back to top |
|
|
Tazok
Guru
Joined: 25 Oct 2003
Posts: 310
|
| Posted: Wed Jul 07, 2004 7:21 pm Post subject: Re: bootsplash |
|
|
| Mafteah wrote: |
vesafb-tng !
Now you can select your refresh rate for your console! |
So I can just copy this line:
"video=vesafb:ywrap,vram:16,1024x768-16@85"
and it should work? |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
| Posted: Wed Jul 07, 2004 7:22 pm Post subject: Re: bootsplash |
|
|
| Tazok wrote: | | Mafteah wrote: |
vesafb-tng !
Now you can select your refresh rate for your console! |
So I can just copy this line:
"video=vesafb:ywrap,vram:16,1024x768-16@85"
and it should work? |
Yes, It should work.
_________________
http://www.mafteah.co.il |
|
| Back to top |
|
|
Mafteah
Apprentice
Joined: 30 May 2003
Posts: 265
Location: IL
|
|
| Back to top |
|
|
Tazok
Guru
Joined: 25 Oct 2003
Posts: 310
|
| Posted: Wed Jul 07, 2004 7:32 pm Post subject: Re: bootsplash |
|
|
| Mafteah wrote: |
Yes, It should work. |
Cool, bootsplash is working again.
But I don't get more than 60Hz using this line:
video=vesafb:ywrap,vram:16,1024x768-16@75 |
|
| Back to top |
|
|
|
Unsupported Software
