Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Performance ATI (Replicado em Kernel &Hardware) Resolvid
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Portuguese
View previous topic :: View next topic  
Author Message
Mythos
l33t
l33t


Joined: 02 May 2004
Posts: 953
Location: Portugal

PostPosted: Wed Jun 09, 2004 12:19 am    Post subject: Performance ATI (Replicado em Kernel &Hardware) Resolvid Reply with quote

Estou com um pequeno problema, tenho o xorg-x11 + ati-3.9.0, AMD 2200+, asus a7v8x AGP 8x, Radeon 9200 SE game buster 128mg tenho este benchmark:


$ glxgears
410 frames in 5.0 seconds = 82.000 FPS
426 frames in 5.0 seconds = 85.200 FPS
425 frames in 5.0 seconds = 85.000 FPS
425 frames in 5.0 seconds = 85.000 FPS
425 frames in 5.0 seconds = 85.000 FPS
424 frames in 5.0 seconds = 84.800 FPS

$ fgl_glxgears
424 frames in 5.0 seconds = 84.800 FPS
419 frames in 5.0 seconds = 83.800 FPS
424 frames in 5.0 seconds = 84.800 FPS
425 frames in 5.0 seconds = 85.000 FPS


Noutro sistema operativo tenho por exmeplo no jogo enemy-territory minimos de 20 fps e máximos de 90 fps

Neste gentoo tenho minimos de 10 fps e máximos de 70 fps.

Será o facto de estar em reiser 3.6, que faz com que tenha um decrescimo de performance ???

Com os rivers antigos da ATI tinha o glxgears a 2000 fps e o fgl_glxgears a 170 fps

Se alguém souber um bom tunning e o que tenho mal no xorg.conf agradecia uma ajuda.

em baixo segue o meu xorg.conf:


# $XdotOrg: xc/programs/Xserver/hw/xfree86/xorgconf.cpp,v 1.1.6.1 2004/04/02 21:47:17 eich Exp $
#
# Copyright (c) 1994-1998 by The XFree86 Project, Inc.

Section "dri"

Mode 0666

EndSection


Section "Module"

Load "dbe" # Double buffer extension

SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection


Load "type1"
Load "freetype"


Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"


# For XFS, uncomment this and comment the others
#FontPath "unix/:-1"
#FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
#FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
#FontPath "/usr/X11R6/lib/X11/fonts/CID/"
#FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"



# ModulePath "/usr/X11R6/lib/modules"

EndSection

Section "ServerFlags"


Option "blank time" "10" # 10 minutes

Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"

# Option "EstimateSizesAggresively" "0"

EndSection


Section "InputDevice"

Identifier "Keyboard1"
Driver "keyboard"

Option "AutoRepeat" "500 5"

Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pt"

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/mouse"

Option "Emulate3Buttons"
EndSection

Section "Monitor"
Identifier "Monitor0"
HorizSync 28-92
VertRefresh 48-85
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

Section "Device"
Identifier "9200"
VendorName "ATI"
BoardName "Radeon 9200 SE"

Chipset "RV280"

Driver "radeon"


# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
VendorName "ATI"
BoardName "ATI Radeon 9200 SE"
#Identifier "ATI Graphics Adapter"
Driver "fglrx"

# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
Option "AGPFastWrite" "True"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "PAL-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "on"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0" # vendor=1002, device=5964
Screen 0
EndSection


Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection


Section "ServerLayout"

Identifier "Server Layout"


Screen "Screen0"


InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###


_________________
Best Regards,
Sérgio Henrique
Linux dune 3.0.6-gentoo #1 SMP Thu Oct 27 16:47:29 WEST 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux
Back to top
View user's profile Send private message
Mythos
l33t
l33t


Joined: 02 May 2004
Posts: 953
Location: Portugal

PostPosted: Wed Jun 09, 2004 10:18 pm    Post subject: Reply with quote

Solucionado por Wedge_, Scotland.

Solução:

https://forums.gentoo.org/viewtopic.php?t=183667
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portuguese All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum