Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Acer Aspire 1501/1511LMI
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4  Next  
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64
View previous topic :: View next topic  
Author Message
techko
n00b
n00b


Joined: 05 Jan 2004
Posts: 6
Location: Presov - Slovakia

PostPosted: Thu Oct 07, 2004 8:29 am    Post subject: Reply with quote

AlienPenguin wrote:
Has any of you managed to make pcmcia work? whenever i insert a pc card (i tried just with different 16bit cards i have here at the university) and none of them is recognized at all... so it tries to load the memory_cs module that is not found.


I've had exactly the same problem on my aspire 1511lc and then I found this: http://cmb.phys.cwru.edu/kisner/linux/compaq-r3000/

u've got to put in your /etc/pcmcia/config.opts
this:
include port 0x100-0x4ff
include port 0x800-0x8ff
include port 0xc00-0xcff
include port 0x3000-0x7fff
include memory 0xe0100000-0xe17fffff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff
include memory 0x60000000-0x60ffffff

and then it looks to work just fine
Back to top
View user's profile Send private message
giuseppe
Tux's lil' helper
Tux's lil' helper


Joined: 25 Apr 2004
Posts: 78

PostPosted: Thu Oct 07, 2004 1:34 pm    Post subject: Reply with quote

I've a question about xorg.conf and lcd for 1513lmi\1511lmi.

In http://casteyde.christian.free.fr/laptop/LinuxOnAspire1511LMi.html about
display is said:

15'' XGA TFT LCD, 1024x768 16M, 85Hz

but I've found in Xorg.0.log that this display is:

range of 29.00-49.00 kHz
range of 0.00-60.00 Hz
Display dimensions: (290, 220) mm ----> 14.3 "

And Windows tells me the same thing.

I don't be able to change to 85Hz this lcd, the graphic card refused this
value directly, I must put: "NODDC" "true" in my xorg.conf and I don't
know if It is correct.

Well, someone know explain this fact and someone can give me his xorg.conf
to help me.

Thank you.

Bye Giuseppe
_________________
"Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor
Back to top
View user's profile Send private message
AlienPenguin
n00b
n00b


Joined: 08 Sep 2004
Posts: 9
Location: Pisa, Italy

PostPosted: Thu Oct 14, 2004 3:46 pm    Post subject: Various replies: Reply with quote

@ brodo: i am on a 64 bit install, and i've heard that some ppl made it work... so i want it too :-)

@techko: it does not seem to work for me :cry:

@anyone with 1511: if u have a fixed dsdt can you please send me the output of cat /proc/acpi/battery/BAT0/info ? because i suspect i have a defective bettery... the design capacity is around 4400 but the last fully charged signal is around 3700

thanks
Back to top
View user's profile Send private message
RAPUL
l33t
l33t


Joined: 29 Dec 2002
Posts: 664
Location: Valencia (SPAIN)

PostPosted: Thu Oct 14, 2004 7:01 pm    Post subject: Re: Various replies: Reply with quote

AlienPenguin wrote:
@anyone with 1511: if u have a fixed dsdt can you please send me the output of cat /proc/acpi/battery/BAT0/info ? because i suspect i have a defective bettery... the design capacity is around 4400 but the last fully charged signal is around 3700

thanks


I have a 1513 with same design capacity. When i bought it charge was 4150 and some months later maximum charge is 3700. Does it help you?
_________________
Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux.
Back to top
View user's profile Send private message
vwj
n00b
n00b


Joined: 01 Sep 2004
Posts: 24
Location: Ekeren, Belgium

PostPosted: Thu Oct 14, 2004 7:17 pm    Post subject: Reply with quote

Hey AlienPenguin,

here is my /proc/acpi/battery/BAT1/info

just like yours not at full charged. BUT this correct, the battery is not broken

For max life time of lithium battery it best to keep it beteween the 20 to 80% of it cappacity

This is way the battery isn't charged to its max capacity

May battery is charged up to 82,5% of it full capacity
(3629 mAh / 4400 mAh * 100 = 82,5%)

Code:

present:                 yes
design capacity:         4400 mAh
last full capacity:      3629 mAh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 300 mAh
design capacity low:     132 mAh
capacity granularity 1:  32 mAh
capacity granularity 2:  32 mAh
model number:            ZP02
serial number:           0
battery type:            LION
OEM info:                SIMPLO
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Fri Oct 15, 2004 11:05 am    Post subject: Reply with quote

dangertools wrote:

@RAPUL:
i have bought a prism based SMC 2835W cardbus wlancard. works perfect. i'll never by again hardware which has something from broadcom built in. even intel has released specs for there centrino wlan-modules. and the prism has much better connectionquality than the BCM with the built in antenna :)


i can't get my SMC 2835W card working. Can you post your kernel config?
even lspci does not show the card.
I have emerged hotplug && pcmcia-cs && wireless-tools

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
dangertools
Apprentice
Apprentice


Joined: 29 Dec 2003
Posts: 278
Location: Saalfelden, Austria

PostPosted: Fri Oct 15, 2004 11:22 am    Post subject: Reply with quote

if you have wireless, prism and yenta socket support in kernel it should work.
but here my .config:

Quote:

# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc4
# Fri Oct 15 12:31:33 2004
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_GART_IOMMU is not set
CONFIG_DUMMY_IOMMU=y
CONFIG_X86_MCE=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_ACPI_CPUFREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_YENTA=y
CONFIG_CARDBUS=y
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_TCIC=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_CTL is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=y
# CONFIG_IEEE1394_AMDTP is not set

#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=y

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=y
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set

# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83627HF=y

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set


#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_BIT32_EMUL is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_WBSD=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_CHECKING is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_SCHEDSTATS is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set


dangertools
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Fri Oct 15, 2004 11:17 pm    Post subject: Reply with quote

@dangertools: can you see what Cardbus controller you have.

I think mine is totally not compatible with the SMC-card. It even does not work in windows. I have had a comparable problem also with an acer laptop and with an other SMC-card and i think the same TI-cardbus controller.

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
elgodo
n00b
n00b


Joined: 16 Oct 2004
Posts: 3

PostPosted: Sat Oct 16, 2004 5:04 pm    Post subject: Reply with quote

First of all, sorry for my english level, but I'm from Spain.

I have an aspire 1502 Lmi on Gentoo 2004.2 compiled in 32 bits (in 64 bits wireless does not work). I
have a problem in linux with wlan (Broadcom 94306...). I install
ndiswrapper with WinXP driver, but when I make "modprobe diswrapper"
the wlan led from the laptop switch off (it was on before), and when I
write "iwlist wlan0 scan", it doesn't find my access point.
(with other windows drivers the led is always on, but the result is the same).

I think the problem is that the wireless is not enable, with acerhk the special buttons does not work neither.

I read it is posible, but it doesnot work for me. Someone has made it works?

Thanks in advance.
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Sat Oct 16, 2004 8:56 pm    Post subject: Reply with quote

elgodo wrote:
First of all, sorry for my english level, but I'm from Spain.

I have an aspire 1502 Lmi on Gentoo 2004.2 compiled in 32 bits (in 64 bits wireless does not work). I
have a problem in linux with wlan (Broadcom 94306...). I install
ndiswrapper with WinXP driver, but when I make "modprobe diswrapper"
the wlan led from the laptop switch off (it was on before), and when I
write "iwlist wlan0 scan", it doesn't find my access point.
(with other windows drivers the led is always on, but the result is the same).

I think the problem is that the wireless is not enable, with acerhk the special buttons does not work neither.

I read it is posible, but it doesnot work for me. Someone has made it works?

Thanks in advance.


My aspire is a 1511, yesterday I installed ndiswrapper following the howto on gentoo-wiki. I worked fine. I saw in the folder of the windows drivers from acer two inf-files. Maybe you used the wrong one.

EDIT: it wasn't the on gentoo-wiki i followed a howto it was here on the forum: https://forums.gentoo.org/viewtopic.php?t=125627&highlight=ndiswrapper+howto

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
elgodo
n00b
n00b


Joined: 16 Oct 2004
Posts: 3

PostPosted: Sat Oct 16, 2004 11:21 pm    Post subject: Reply with quote

Quote:
My aspire is a 1511, yesterday I installed ndiswrapper following the howto on gentoo-wiki. I worked fine. I saw in the folder of the windows drivers from acer two inf-files. Maybe you used the wrong one.

EDIT: it wasn't the on gentoo-wiki i followed a howto it was here on the forum: https://forums.gentoo.org/viewtopic.php?t=125627&highlight=ndiswrapper+howto


That doesn´t work for me neither :-(.

Did you have to activate the wireless in linux? (with the laptop button or something else)

Thanks in advance
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Sun Oct 17, 2004 1:42 pm    Post subject: Reply with quote

elgodo wrote:
Quote:
My aspire is a 1511, yesterday I installed ndiswrapper following the howto on gentoo-wiki. I worked fine. I saw in the folder of the windows drivers from acer two inf-files. Maybe you used the wrong one.

EDIT: it wasn't the on gentoo-wiki i followed a howto it was here on the forum: https://forums.gentoo.org/viewtopic.php?t=125627&highlight=ndiswrapper+howto


That doesn´t work for me neither :-(.

Did you have to activate the wireless in linux? (with the laptop button or something else)

Thanks in advance


I activate it with the laptop button yes
right now i am struggling to make X work with nvidia again. I don't know why, but it does not want to work anymore.

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
elgodo
n00b
n00b


Joined: 16 Oct 2004
Posts: 3

PostPosted: Sun Oct 17, 2004 2:34 pm    Post subject: Reply with quote

Quote:
I activate it with the laptop button yes


Which software do you use to manage the laptop buttons?? I tried acerhk, but does not work. In the acerhk page doesn't appear the 1500 series like supported series (1400, 1600 and lot of others yes).

Thanks.
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Sun Oct 17, 2004 2:42 pm    Post subject: Reply with quote

elgodo wrote:
Quote:
I activate it with the laptop button yes


Which software do you use to manage the laptop buttons?? I tried acerhk, but does not work. In the acerhk page doesn't appear the 1500 series like supported series (1400, 1600 and lot of others yes).

Thanks.


I don't use any software for the buttons yet, but here the wifi button is in hardware, so it works in windows just like in windows, without installing anything

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
giuseppe
Tux's lil' helper
Tux's lil' helper


Joined: 25 Apr 2004
Posts: 78

PostPosted: Fri Nov 19, 2004 7:28 pm    Post subject: Reply with quote

Hi,

I've an Acer Aspire 1513lmi; this notebook is a 1511lmi + AMD Athlon 64 Processor 3400+ and their DSDTs are identical.
I've followed the threads about the 1511lmi and I found the Christian Casteyde DSDT and his suggestions in:

http://casteyde.christian.free.fr/laptop/LinuxOnAspire1511LMi.html

and the DSDT in:

http://acpi.sourceforge.net/dsdt/tables/ACER/Aspire_1513LMi/ACER-Aspire_1513LMi-unknown_bios-custom.asl.gz

and these work fine on my system.

My system is a dual boot system Gentoo-64 + Freebsd-64 (5.3 installation) and then the DSDT problem is also
a Freebsd problem.
In Freebsd the better way to obtain the DSDT is the acpidump solution and this DSDT is just like the DSDT that
I obtained by my Linux system, except for some initial notes, for the file tail, and a error that the Freebsd iasl and
http://acpi.sourceforge.net/dsdt/tables/ACER/Aspire_1513LMi/ACER-Aspire_1513LMi-unknown_bios-custom.asl.gz signal
but the iasl in Linux doesn't signal.

The Linux DSDT tail is:

.
.
.
Name (FWSO, "FWSO")
}


The Freebsd DSDT tail is:

.
.
.
Name (FWSO, "FWSO")
Scope (\_PR.CPU0)
{
Name (_PCT, Package (0x02)
{
ResourceTemplate ()
{
Register (FFixedHW, 0x00, 0x00, 0x0000000000000000)
},

ResourceTemplate ()
{
Register (FFixedHW, 0x00, 0x00, 0x0000000000000000)
}
})
Name (_PSS, Package (0x04)
{
Package (0x06)
{
0x00000898,
0x00013E5C,
0x00000064,
0x00000009,
0xE020288E,
0x0000008E
},

Package (0x06)
{
0x000007D0,
0x0000FA00,
0x00000064,
0x00000009,
0xE020298C,
0x0000018C
},

Package (0x06)
{
0x00000708,
0x0000B798,
0x00000064,
0x00000009,
0xE0202A8A,
0x0000028A
},

Package (0x06)
{
0x00000320,
0x00004A38,
0x00000064,
0x00000009,
0xE0202C80,
0x00000480
}
})
Name (_PPC, 0x00)
}
}



I'm not a acpi-asl expert, but this excerpt, I think, defines the cpu object. There are three subobjects:

the _PCT interface, the _PSS declaration about the performance states and
the _PPC method, and they make clear the file part:

Scope (\_PR)
{
Processor (CPU0, 0x00, 0x00008010, 0x06) {}
}

The only part that, I think, is strange in this excerpt is "Name (_PPC, 0x00)", because _PPC is a method and its definition
form, in general, is:

Method (_PPC, ...)

{
.
.
}

but here, _PPC has an objectname form.

Anyway in the Freebsd DSDT, the only necessary changes are:


3975,3980d3974
<
< Return (Package (0x02) <---**Note
< {
< Zero,
< Zero
< })
5163,5164c5157,5158
< 0x00,
< 0x00,
---
> Z005,
> Z005,
5456d5449
< Return(Package(0x02){0x00, 0x00})

***Note:

These additional lines are absent in the Casteyde DSDT
and I obtain its solution by the DSDT for the 1513lmi in:

http://acpi.sourceforge.net/dsdt/tables/ACER/Aspire_1513LMi/ACER-Aspire_1513LMi-unknown_bios-custom.asl.gz

at the line 3893.
Note that the iasl decompiler, in Linux, doesn't
signals this error, but the Freebsd one signals it.
******

Note that the Freebsd DSDT is longer that the Linux DSDT because the first one has some initial notes.
The Freebsd DSDT tail can't be added to the Linux DSDT, because the Linux system doesn't boot with this.


I don't know why the Freebsd DSDT is so different, but peraphs someone can use this excerpt to improve the DSDT corrections.
I can add that these corrections work in the Freebsd system, and the error signals disappear with the corrected DSDT, but
I can't know if the acpi system work fine with Freebsd, because the Freebsd S.O. doesn't implement
the powernow-k8 functionalities.
Peraphs this Freebsd DSDT tail is only an external (this is strange because the AML decompilers don't print the externals), and in fact the powenow-k8 functionalities for the frequencies 2200000 (0x00000898), 2000000
(0x000007D0), 1800000 (0x00000708), 800000 ( 0x00000320) are correctly recognized by Linux, and then this tail isn't
necessary.

About the error that the Freebsd iasl (and the http://acpi.sourceforge.net/dsdt/tables/ACER/Aspire_1513LMi/-
ACER-Aspire_1513LMi-unknown_bios-custom.asl.gz) signals and the Linux iasl (and Casteyde for 1511lmi) doesn't signal,
I add this comment that I found in http://www.cpqlinux.com/acpi-howto.html:

.
.
.
Note: It may be possible to use iasl with the -d option to dump your table to .asl as well; however, one guy at the acpica
ML who showed me this had the following to say:

"I have not checked actually if iasl is 'good' in order to disable the AML. It is a new feature, so that it has perhaps
some bugs. I can not be sure.

Using pacpidump should be OK, but the version you point was updated, debugged, etc. under FreeBSD, and those changes are
present only under FBSD, not the one you pointed."
.
.
.


Then I think that the acpidump command and iasl command in Freebsd works
better that in Linux and that the freebsd error signals are, peraphs, more
correct.

Bye Giuseppe
_________________
"Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor
Back to top
View user's profile Send private message
RAPUL
l33t
l33t


Joined: 29 Dec 2002
Posts: 664
Location: Valencia (SPAIN)

PostPosted: Fri Nov 19, 2004 8:59 pm    Post subject: Reply with quote

Does pcmcia works for you?

I have same notebook and my pcmcia wifi cards doesn't work.
pcmcia works with an usb pcmcia card.
kernel 2.6.5-2.6.9 hangs when i launch /etc/init.d/pcmcia
kernel >2.6.10-rc1 does not hang and detects my cards but hanga later when i try to use the wlan (example dhcp).

My pcmcia controller is a Texas Instruments 4510, aka TI 4510.

I have opened a bug in sourceforge:

http://sourceforge.net/tracker/index.php?func=detail&aid=1066787&group_id=2405&atid=102405

Any of you got the pcmcia fully working?
_________________
Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux.


Last edited by RAPUL on Sat Nov 20, 2004 12:53 am; edited 1 time in total
Back to top
View user's profile Send private message
RAPUL
l33t
l33t


Joined: 29 Dec 2002
Posts: 664
Location: Valencia (SPAIN)

PostPosted: Sat Nov 20, 2004 12:43 am    Post subject: PCMCIA does work in Acer Aspire 1513 Reply with quote

I got my pcmcia working with a 2.6.10-rc2 kernel. I am happy now.

It is also a nice kernel since it let me use cisco-3des-vpnclient to connect to my university.
I wil switch then from 2.6.5-r1 to 2.6.10-rc2.

Remember to add to your /etc/pcmcia/config.opts as Dave (pcmcia developer) said.

Code:

# Dave said to try this
include memory 0xd0100000-0xd04fffff
include port 0x3000-0x3fff

_________________
Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux.
Back to top
View user's profile Send private message
giuseppe
Tux's lil' helper
Tux's lil' helper


Joined: 25 Apr 2004
Posts: 78

PostPosted: Sat Nov 20, 2004 5:06 pm    Post subject: Reply with quote

The answer to my precedent question is here:

http://sourceforge.net/mailarchive/message.php?msg_id=10093443

I hope that this make clear my error.

Bye Giuseppe
_________________
"Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor
Back to top
View user's profile Send private message
Delvin
Guru
Guru


Joined: 07 Jul 2004
Posts: 546

PostPosted: Tue Nov 30, 2004 7:45 pm    Post subject: Reply with quote

(please excuse me for my pityfull english...)

does nobody has problems with the tft screen ???

on my 1513 Lmi, xorg sometimes make strips on the screen during less than half a second (it goes through the screen) and then it comes back...

the problem is not that happens it's just that when i'm playing a video (divx, mpg, whatever...) the video disappear and then i have to restart X....

it's really annoying because it happens about every minutes...

please somenone helps me...
_________________
Ne tirez pas sur les canards !!
Back to top
View user's profile Send private message
frocksii
Tux's lil' helper
Tux's lil' helper


Joined: 19 Nov 2003
Posts: 91

PostPosted: Tue Nov 30, 2004 10:32 pm    Post subject: Reply with quote

Delvin wrote:
(please excuse me for my pityfull english...)

does nobody has problems with the tft screen ???

on my 1513 Lmi, xorg sometimes make strips on the screen during less than half a second (it goes through the screen) and then it comes back...

the problem is not that happens it's just that when i'm playing a video (divx, mpg, whatever...) the video disappear and then i have to restart X....

it's really annoying because it happens about every minutes...

please somenone helps me...


I don't have any problems with the tft (1511 Lmi), maybe if you pm me your e-mail, I can send you my xorg.conf

frocksii
_________________
Acer Aspire 1511 : AMD64 3000+ (1.8 ghz 1024 kb)
Back to top
View user's profile Send private message
murphydog
n00b
n00b


Joined: 04 Feb 2004
Posts: 25
Location: North UK

PostPosted: Tue Dec 14, 2004 4:24 pm    Post subject: Reply with quote

Hi. I've got an aspire 1513Lmi and i get the same 'screen flicker' that delvin has, however its just a screen thing for me and doesn't cause anything to crash. However it is annoying!! Does anyone else have it? The screen tears/flickers every few minutes, but only for a fraction of a seconed. I'd guess that its something to do with refresh rates and the like. My xorg.conf:
Code:
HorizSync   28-49
VertRefresh 43-72

Is this the same as other peoples? can someone without this flicker please post there refresh rates, or am i barking up the wrong tree?
Cheers
Richard
Back to top
View user's profile Send private message
giuseppe
Tux's lil' helper
Tux's lil' helper


Joined: 25 Apr 2004
Posts: 78

PostPosted: Tue Dec 14, 2004 6:27 pm    Post subject: Reply with quote

Hi, I've posted my xorg.conf to Delvin, I don't know if it's working for him.
I've not this problem on my Gentoo system, but only on my FreeBsd system
(32bit version) and I've not solved it. In this case I think that you can use

Section "Monitor"

Identifier "Monitor0"
VendorName "Acer"
ModelName "PnP"
Option "DPMS" <------- This is important

EndSection

Bye
_________________
"Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor
Back to top
View user's profile Send private message
murphydog
n00b
n00b


Joined: 04 Feb 2004
Posts: 25
Location: North UK

PostPosted: Tue Dec 14, 2004 11:10 pm    Post subject: Reply with quote

Thanks for the reply. I added the DPMS line to my xorg.conf, but unfortunately it doesn't seem to have solved the problem. Any ideas?
Back to top
View user's profile Send private message
BoZ
Tux's lil' helper
Tux's lil' helper


Joined: 27 Aug 2003
Posts: 114
Location: The Netherlands

PostPosted: Thu Dec 16, 2004 10:48 am    Post subject: Reply with quote

murphydog wrote:
can someone without this flicker please post there refresh rates, or am i barking up the wrong tree?
Cheers
Richard

I haven't spend to many time configuring X because it actually worked the first time without any problems. This means my refresh rates might not be the best possible.

HorizSync 31.5 - 57.0
VertRefresh 50-90

I have an Acer 1511LMi
Back to top
View user's profile Send private message
murphydog
n00b
n00b


Joined: 04 Feb 2004
Posts: 25
Location: North UK

PostPosted: Thu Dec 16, 2004 11:07 pm    Post subject: Reply with quote

Thanks for the reply Boz. I tried your refresh rates but i still get the flicker. Is there anyone with a 1513Lmi who doesn't have the flicker under gentoo? If so, could you send me your xorg.conf and details of nvidia drivers versions and xorg versions and all sorts of stuff like that :P
Thanks
Richard
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64 All times are GMT
Goto page Previous  1, 2, 3, 4  Next
Page 3 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum