Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ck2 or love4 ?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Wed Apr 14, 2004 10:19 pm    Post subject: ck2 or love4 ? Reply with quote

Hi,

I am stuck. I have been using love kernels for a couple of months and really like them except I cant get my CanoScan USB to work.

I recently tried ck2 sources and WOW , the scanner works! Only pb is I now have no sound.


The kernel configs are as identical as I can get them, and the rest of the system does not chamge inbetween boots so it must be kernel differnces.


Can anyone help me sort out one or the other so that I have a fully usable system.

Both kernels seem damn good, except to these sticking points. :?

I find ck2 has less hesitation on the mouse when working hard (big emerges) but task switching is lot less frequent. (I have seen an ebuild stopped for a couple of minutes when there are 2 or 3 running at the same time.)

In short they are both good and I will go with the one I get working fully.

TIA, Gentree. 8)
Back to top
View user's profile Send private message
kevmille
Guru
Guru


Joined: 26 Jul 2003
Posts: 311
Location: Ho Chi Minh City (Saigon), Vietnam

PostPosted: Fri Apr 16, 2004 2:13 am    Post subject: Reply with quote

Have you posted your question on the love-sources threads?

https://forums.gentoo.org/viewtopic.php?t=160332

https://forums.gentoo.org/viewtopic.php?t=162025
_________________
My Company: Hakata Consulting
Back to top
View user's profile Send private message
jeversol
n00b
n00b


Joined: 04 Apr 2003
Posts: 17

PostPosted: Fri Apr 16, 2004 2:37 am    Post subject: Reply with quote

I am currently using -ck sources since Reiser4 has not been included in recent love-sources.

The only downside immediately of Con's patchset is that he's on hiatus until the end of May, so, 2.6.4-ck2 will be the latest version for quite a while.

--je
Back to top
View user's profile Send private message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Fri Apr 16, 2004 9:01 am    Post subject: Reply with quote

kevmille wrote:
Have you posted your question on the love-sources threads?

https://forums.gentoo.org/viewtopic.php?t=160332

https://forums.gentoo.org/viewtopic.php?t=162025


Yes , posted in both love and ck threads and got no replies.

That's why I started a new thread.
Back to top
View user's profile Send private message
kevmille
Guru
Guru


Joined: 26 Jul 2003
Posts: 311
Location: Ho Chi Minh City (Saigon), Vietnam

PostPosted: Fri Apr 16, 2004 4:03 pm    Post subject: Reply with quote

Gentree wrote:
kevmille wrote:
Have you posted your question on the love-sources threads?

https://forums.gentoo.org/viewtopic.php?t=160332

https://forums.gentoo.org/viewtopic.php?t=162025


Yes , posted in both love and ck threads and got no replies.

That's why I started a new thread.


I found that you have to be patient with these love-source guys. They are a bit more advanced than the average Gentoo user such as myself. With enough pestering, they do answer your questions :D
_________________
My Company: Hakata Consulting
Back to top
View user's profile Send private message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Fri Apr 16, 2004 4:51 pm    Post subject: Reply with quote

Yeah, I'm sure they're on another plane with finer arts of kernel tweeking and not too keen to get bogged down in my silly USB pbs.

Hwvr , if ck2 kernel works here and love dont, there is probably an issue that needs addressing.

I have seem other posts indicating that ck2 was better with USB, so I dont think its an odd-ball setup on my end.

I live in hope....
Back to top
View user's profile Send private message
steel300
Veteran
Veteran


Joined: 10 Jul 2003
Posts: 1155

PostPosted: Fri Apr 16, 2004 5:03 pm    Post subject: Reply with quote

Gentree wrote:
Yeah, I'm sure they're on another plane with finer arts of kernel tweeking and not too keen to get bogged down in my silly USB pbs.

Hwvr , if ck2 kernel works here and love dont, there is probably an issue that needs addressing.

I have seem other posts indicating that ck2 was better with USB, so I dont think its an odd-ball setup on my end.

I live in hope....


Love contains the latest bk pull form the usb tree. This can (and has) broken and fixed many USB things. It varies from release to release.
_________________
Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it.
Back to top
View user's profile Send private message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Fri Apr 16, 2004 6:54 pm    Post subject: Reply with quote

Thanks very much for the reply Steel.

What should I conclude from the situation?

Would I be wasting my time changing non-kernel software and configs stuff that has been shown to work under other sources? Or is it possible that love kernel can be made to work with this scanner driver?

Hotplugging works fine and xscanimage and scanimage -L find the device OK, it is just as soon as I try anything that actually drives the scanner it locks up . When I unplug the usb cable I get back control of the software and a message to the effect "device busy".

It's probably beyond my knowlege at this stage to start taking ck and love appart to see where the critiical difference is.

I would prefer to stick with love kernel , i've just moved over to Xorg.(thanks for the wrapper post earlier today :) ) there are other issues with ck and I dont want to change horses unless I have to.

Thanks for any advice .
8)

If nothing else I like my alias make-love for rebuilding the kernel. make-ck doesnot have the same effect! :oops:
Back to top
View user's profile Send private message
steel300
Veteran
Veteran


Joined: 10 Jul 2003
Posts: 1155

PostPosted: Fri Apr 16, 2004 6:55 pm    Post subject: Reply with quote

Does the scanner use libusb or an in kernel driver? I'm guessing it uses libusb now. Perhaps upgrading libusb to the latest unstable would be of a benefit.
_________________
Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it.
Back to top
View user's profile Send private message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Fri Apr 16, 2004 7:34 pm    Post subject: Reply with quote

bash-2.05b# scanimage -L
device `canon630u:libusb:001:004' is a CANON Canoscan FB630U flatbed scanner
bash-2.05b#

bash-2.05b# emp libusb
Calculating dependencies ...done!
[ebuild R ] dev-libs/libusb-0.1.7-r1

bash-2.05b# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:08.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
00:09.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
00:0b.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 23)
bash-2.05b#


Thanks again.
Back to top
View user's profile Send private message
Gentree
Watchman
Watchman


Joined: 01 Jul 2003
Posts: 5350
Location: France, Old Europe

PostPosted: Sun May 23, 2004 5:08 pm    Post subject: Reply with quote

Following your suggestion Steel I put libusb to ~x86

(I'm now running 2.6.6-love4 and have portage testing r4)

Code:

[ebuild   R   ] media-gfx/xsane-0.93 

[ebuild   R   ] media-gfx/sane-backends-1.0.14-r2 

[ebuild   R   ] dev-libs/libusb-0.1.8 


Did not change the behaviour one jot but it was worth a try.

I find the following in dmesg just after trying xscan:

Code:
usb 1-2: USB disconnect, address 3
usb 1-2: new full speed USB device using address 6
usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd xsane rqt 192 rq 12 len 1 ret -71
usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd xsane rqt 192 rq 12 len 1 ret -71


I'm tempted to buy another scanner but I dont like giving in .

Any idea how I should proceed?

Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum