dek
l33t
Joined: 16 May 2002
Posts: 657
Location: Germany
|
 Posted: Mon Sep 16, 2002 8:57 pm Post subject: USB Multi-Cardreader |
 |
|
I purchased a 6-in-1 Multi-Cardreader. It was recommended in a german linux magazine. The article says it should create 3 devices:
/dev/sda -> CompactFlash Card
/dev/sdb -> SmartMedia Card
/dev/sdc -> Multimedia Card
But i can only use the CF properly.
The other devices (/dev/sdb and /dev/sdc) are not created (and not to be found in /dev/scsi/*)
All the needed modules (usb-uhci, usb-storage, sd_mod) are loaded.
The article says no additional modules are needed. It doesn't say anything about devfs though. 
How do have to setup devfs to find the devices?
| Code: |
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: USB Card Reader Rev: 1.05
Type: Direct-Access ANSI SCSI revision: 02
# cat /proc/scsi/usb-storage-0/1
Host scsi1: usb-storage
Vendor: Unknown
Product: USB Reader
Serial Number: 0326080004C4
Protocol: Transparent SCSI
Transport: Bulk
GUID: 0d7d024000000326080004c4
Attached: Yes
|
|
|
Kernel & Hardware
