View previous topic :: View next topic |
Author |
Message |
Birnenpfluecker Guru
Joined: 01 Sep 2003 Posts: 315 Location: Lage, Germany
|
Posted: Sat Mar 13, 2004 7:42 pm Post subject: ide drives oder raid connector asus k8v |
|
|
I've connected two hd's to the Raid Ultra ATA 133 Connector of my Asus k8v, but I cannot find them in /dev. What kernel options must I enable to recognize them? Have only enabled the Promise and Via SATA Raid support, but I guess I need Promis IDE raid support (The 2 hds are not in raid modus and work perfectly, winXP recognuizes them) or something like that, but I cannot find something in the kernel. |
|
Back to top |
|
|
srs5694 Guru
Joined: 08 Mar 2004 Posts: 434 Location: Woonsocket, RI
|
Posted: Sat Mar 13, 2004 8:58 pm Post subject: |
|
|
If by "SATA Raid support" you mean you've activated the libata support in the SCSI section of the kernel, then that's not what you need to use parallel ATA 133 drives; you need regular parallel ATA drivers, activated in the ATA section of the kernel. Note that the RAID features of these controllers are pretty minimal, and require special driver support in the OS. This support is weak or completely missing in Linux for most controllers, so don't get hung up on the RAID terminology; they're regular ATA controllers, as far as Linux is concerned. If you've activated RAID features in the BIOS and another OS, you may need to undo that or try to find appropriate Linux drivers, which may be tricky or impossible. |
|
Back to top |
|
|
dasbear n00b
Joined: 21 Jul 2002 Posts: 33 Location: Dallas, TX
|
Posted: Mon Mar 15, 2004 5:24 am Post subject: |
|
|
I too am trying to this ide interface to work. As a normal IDE controller, not as raid controller. I told the bios to use this controller as an IDE master.
2.6.3-gentoo-r2 does not recognize it as an ide controller.
Code: |
00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80)
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at e800 [size=8]
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at d800 [size=4]
I/O ports at d400 [size=16]
I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
|
Here is how the ide part in my kernel is set up:
Code: |
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
|
I did not see ide driver support for a VIA 3149 in the kernel. |
|
Back to top |
|
|
mathes.s Apprentice
Joined: 18 Apr 2003 Posts: 279 Location: Brunswick, Germany
|
Posted: Mon Mar 15, 2004 10:41 am Post subject: |
|
|
Hi,
I have the same MoBo and I have the same Problem. I think you want to get the single Pata Channel working that is connected to the Promise Conntroller. But the Problem is that it is not supported by the Kernel nor by Promise.
https://forums.gentoo.org/viewtopic.php?t=143673&highlight=
Mathes _________________ Erst wenn der letzte Programmierer eingesperrt, das letzte Programm verwirklicht und die letzte Idee patentiert ist, werdet Ihr merken, dass Anwälte nicht programmieren können. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|