| View previous topic :: View next topic |
| Author |
Message |
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
 Posted: Sat Feb 21, 2004 4:17 pm Post subject: ATI drivers - error...help :( |
 |
|
Ok, I decided to try the ATI drivers again. I got it all setup and created my new XF86Config file. But DRI doesn't load! (3d support) 
This is the error I found in my log:
| Code: |
(II) fglrx(0): [drm] register handle = 0xe5000000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe088e000 at 0x401ea000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
|
I have DRM off in the kernel, as well as nvidia and agpgart as modules.
I have tried the "useinternelagpgart" variable as both yes and no, to no avail.
Does anyone have any idea what to do, I really want 3D support :p |
|
| Back to top |
|
 |
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 4:17 pm Post subject: |
|
|
Here is my XF86Config file:
| Code: |
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
Mode 0666
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "Monitor0"
HorizSync 30 - 85
VertRefresh 50 - 160
Option "DPMS"
2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4150
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
|
|
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 4:47 pm Post subject: |
|
|
Can you post your whole XFree log? If you're using a 2.6 kernel, have you loaded both agpgart and nvidia-agp before starting X? (it won't do it for you).
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 5:07 pm Post subject: |
|
|
modprobe -r fglrx (or whatever the agpgart module is called)
modprobe -r agpgart
modprobe agpgart
modprobe fglrx
I did that, but didn't do nvidia-agp, is it just modprobe nvidia-agp?
| Quote: |
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF]
Build Date: 09 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 21 10:37:52 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 12b9,1008 card 12b9,00ad rev 01 class 07,00,02 hdr 00
(II) PCI: 01:09:0: chip 1186,1300 card 1186,1301 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:00:0: chip 1002,4150 card 148c,2066 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4170 card 148c,2067 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x00009fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[B]
(--) PCI:*(2:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xc0000000/28, 0xe5000000/16, I/O @ 0xa000/8
(--) PCI: (2:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xd0000000/28, 0xe5010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[1] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[2] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[3] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[4] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[5] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[10] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[13] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[15] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[1] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[2] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[3] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[4] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[5] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[10] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[12] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[13] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[15] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[1] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[7] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[8] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[9] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[10] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[19] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[22] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[23] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[24] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[25] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 3.2.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 02:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset ATI RV350 AP (R9600) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[7] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[8] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[9] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[10] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[19] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[22] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[23] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[24] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[25] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x08216b18
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[7] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[8] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[9] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[10] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[22] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[25] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[26] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[27] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[28] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI RV350 AP (R9600)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x148c, PciSubDevice = 0x2066)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x04
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: b4 Serial#: 1095643449
(II) fglrx(0): Year: 2003 Week: 52
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 1.47
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.639 redY: 0.323 greenX: 0.275 greenY: 0.597
(II) fglrx(0): blueX: 0.143 blueY: 0.062 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) fglrx(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) fglrx(0): #5: hsize: 1792 vsize 1344 refresh: 60 vid: 16577
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 352 x 264 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 190 MHz
(II) fglrx(0): Monitor name: SAMSUNG
(II) fglrx(0): Serial No: HVAWC26788
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=30000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 4 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (90, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): FSAAScale=1
(**) fglrx(0): FSAA Gamma 141366483
(**) fglrx(0): FSAA Multisample Position is 141368355
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 3.2.8
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000072d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[8] -1 0 0xe7001000 - 0xe7001fff (0x1000) MX[B]
[9] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[10] -1 0 0xe7005000 - 0xe70050ff (0x100) MX[B]
[11] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B]
[12] -1 0 0xe7003000 - 0xe7003fff (0x1000) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
[17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[25] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[27] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[B]
[28] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[29] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B]
[30] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[31] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xc0700000 (size=0x07900000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe088e000
(II) fglrx(0): [drm] mapped SAREA 0xe088e000 to 0x401ea000
(II) fglrx(0): [drm] framebuffer handle = 0xc0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 3.2.8
(II) fglrx(0): Date: Sep 21 2003
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.2-rc1-gentoo
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xe5000000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe088e000 at 0x401ea000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xc0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 7
|
|
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 5:18 pm Post subject: |
|
|
Yes, it's just "modprobe nvidia-agp". If you want to load them automatically on boot, add | Code: | agpgart
nvidia-agp
fglrx |
to /etc/modules.autoload.d/kernel-2.6. With a 2.6 kernel, you need to have both the kernel AGP modules loaded before AGP will work, while with 2.4 you only needed to load agpgart. Hopefully it should work after you've done that, I don't see anything else wrong.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 5:49 pm Post subject: |
|
|
I GOT IT!!! I HAVE 3D SUPPORT FOR MY AIT CARD
I ran glxgears (my reso is 1280x1024) and got 768 FPS...is that good for a 9600pro? (taking my resolution into consideration?)
BTW, your Radeon guide is awesome...I used it for my install  |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 6:16 pm Post subject: |
|
|
| edulive wrote: | | I ran glxgears (my reso is 1280x1024) and got 768 FPS...is that good for a 9600pro? (taking my resolution into consideration?) |
It seems a bit low for glxgears. Did you mean fgl_glxgears? Or were you running it in fullscreen mode? Have you turned on FSAA?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 6:31 pm Post subject: |
|
|
in fgl_glxgears i only got about 205 FPS, and that was the FPS of the boxes it brings up...in fullscreen glxgears I got about 550FPS
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
thats the FSAA part of my XF86Config..do I need to enable it?
Can you look at my XF86Config file and see if there is ANY tweaking I can do?
Quake 3 was PLAYABLE at 800x600 and 640x480 but it was painful...I want to be able to play my games! |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 6:53 pm Post subject: |
|
|
There are some minor tweaks that can sometimes give you a little more performance, but it looks like something else is wrong if you're getting a score of ~760 fps from glxgears at it's default size. With that card I think you should be getting at least 2000 fps. Try setting "UseFastTLS" to "2", and adding | Code: | | Option "EnablePrivateBackZ" "yes" |
.
Can you post your updated XFree logfile?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 7:24 pm Post subject: |
|
|
Now I get this (after doing what you said):
bash-2.05b$ glxgears
11427 frames in 5.0 seconds = 2285.400 FPS
13064 frames in 5.0 seconds = 2612.800 FPS
13601 frames in 5.0 seconds = 2720.200 FPS
13635 frames in 5.0 seconds = 2727.000 FPS
13530 frames in 5.0 seconds = 2706.000 FPS
Broken pipe
bash-2.05b$ fgl_glxgears
1912 frames in 5.0 seconds = 382.400 FPS
1955 frames in 5.0 seconds = 391.000 FPS
, pretty good?
What are those tweaks..I'd love to get it working even better. Quake3 is VERY playable up to 1280x1024 (the highest I tried)
I don't have sound though! How do I get sound for my A7N8X? (nForce2) |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 8:07 pm Post subject: |
|
|
| edudlive wrote: | | pretty good? |
Yep, that's looking a lot better now.
| edudlive wrote: | | What are those tweaks..I'd love to get it working even better. |
I was talking about the stuff I suggested in my last post I'm really surprised it seems to make so much of a difference to your scores. Do you have any errors in your dmesg output or XFree log?
| edudlive wrote: | | I don't have sound though! How do I get sound for my A7N8X? (nForce2) |
If you're using the 2.6 kernel I think you just need to enable the i810 ALSA driver in the sound section of the config. Read the Gentoo ALSA guide if you're not sure how to set it up (ignore the section on emerging alsa-drivers or selecting sound support in the kernel, that doesn't apply to 2.6), or search the forums, there should be lots of posts on this subject.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 8:22 pm Post subject: |
|
|
| sound section of what config? XF86Confg? |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 9:03 pm Post subject: |
|
|
Kernel config.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
edudlive
Guru
Joined: 06 Jan 2004
Posts: 557
|
| Posted: Sat Feb 21, 2004 10:16 pm Post subject: |
|
|
| It is compiled into my kernel |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Feb 21, 2004 10:46 pm Post subject: |
|
|
Then that's all you need do to get the driver ready. A quick search for "quake3 nforce sound" on the forums revealed this thread, which looks like it might help you out.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gamers & Players
