Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
no sound, i8xx, on board, integrated, i815, i810, ICH
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Mon Sep 02, 2002 8:50 pm    Post subject: no sound, i8xx, on board, integrated, i815, i810, ICH Reply with quote

Hi dear all,
here is the problem... dunno what to do with it...
Code:

Intel 810 + AC97 Audio, version 0.21, 22:57:46 Sep  2 2002
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xef00 and 0xe800, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2

gfdsa dev # cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 2).
      Prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 2).
      Master Capable.  Latency=32.  Min Gnt=8.
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 2).
      Master Capable.  No bursts.  Min Gnt=2.
  Bus  0, device  31, function  0:
    ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: Intel Corp. 82801BA IDE U100 (rev 2).
      I/O at 0xffa0 [0xffaf].
  Bus  0, device  31, function  2:
    USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 2).
      IRQ 11.
      I/O at 0xef40 [0xef5f].
  Bus  0, device  31, function  3:
    SMBus: Intel Corp. 82801BA/BAM SMBus (rev 2).
      IRQ 9.
      I/O at 0xefa0 [0xefaf].
  Bus  0, device  31, function  4:
    USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 2).
      IRQ 10.
      I/O at 0xef80 [0xef9f].
  Bus  0, device  31, function  5:
    Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 2).
      IRQ 9.
      I/O at 0xe800 [0xe8ff].
      I/O at 0xef00 [0xef3f].
  Bus  2, device   0, function  0:
    VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0xfc000000 [0xfdffffff].
      Prefetchable 32 bit memory at 0xf0000000 [0xf1ffffff].
      I/O at 0xd800 [0xd8ff].
  Bus  1, device  10, function  0:
    SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 1).
      IRQ 6.
      Master Capable.  Latency=32.  Min Gnt=8.Max Lat=8.
      I/O at 0xc800 [0xc8ff].
      Non-prefetchable 32 bit memory at 0xfa9ff000 [0xfa9fffff].
  Bus  1, device  13, function  0:
    Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 65).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=20.Max Lat=40.
      I/O at 0xcc00 [0xcc7f].
      Non-prefetchable 32 bit memory at 0xfa9fec00 [0xfa9fefff].
gfdsa dev # cat /proc/dma
 4: cascade
gfdsa dev # cat /proc/irq/
cat: /proc/irq/: Is a directory
gfdsa dev # cat /proc/interrupts
           CPU0
  0:    1974615          XT-PIC  timer
  1:       3131          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  6:      10283          XT-PIC  aic7xxx
  8:          2          XT-PIC  rtc
  9:       7421          XT-PIC  Intel ICH2
 10:          0          XT-PIC  usb-uhci
 11:       1412          XT-PIC  usb-uhci, eth0
 12:      52892          XT-PIC  PS/2 Mouse
 14:         16          XT-PIC  ide0
 15:      21809          XT-PIC  ide1
NMI:          0
ERR:          0
gfdsa dev # cat /proc/irq/
0              10             12             14             2              4              6              8              prof_cpu_mask
1              11             13             15             3              5              7              9
gfdsa dev # ls /proc/irq/9
gfdsa dev # ls -la /proc/irq/9
total 0
dr-xr-xr-x    2 root     root            0 Sep  2 23:51 .
dr-xr-xr-x   18 root     root            0 Sep  2 23:51 ..
gfdsa dev #


looks great, but i cant make it sound...
no errors from programs, but mpg123 play mp3s very fast, cat smthng>/dev/dsp stucks....
any clues?

Thank you in advance

P.S. tried as both modules and not... devfs?
Code:
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Tue Sep 03, 2002 6:35 pm    Post subject: Reply with quote

:-(
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Tue Sep 03, 2002 7:45 pm    Post subject: Reply with quote

Have you tested it as root or a regular users? Regular users (and also root) must be in "audio" group.

What about your /etc/devsfd.conf?
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Tue Sep 03, 2002 9:38 pm    Post subject: Reply with quote

here is relevant section of defsd.conf:
Code:

LOOKUP          snd          MODLOAD ACTION snd
LOOKUP          dsp          MODLOAD
LOOKUP          mixer        MODLOAD
LOOKUP          midi         MODLOAD
REGISTER        sound/.*     PERMISSIONS root.audio 660
REGISTER        snd/.*       PERMISSIONS root.audio 660

and imho its not permissions:
Code:

ls -l /dev/sound/
total 0
crw-rw----    1 root     audio     14,   3 Jan  1  1970 dsp
crw-rw----    1 root     audio     14,   0 Jan  1  1970 mixer

i tried to cat things to /dev/sound/dsp, usually it results in sound, in my case it stucks...
my user is in audio group, root as i see does not have to be
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Tue Sep 03, 2002 10:20 pm    Post subject: Reply with quote

Looks OK. Are you using some Desktop Manager which has a sound server (like artsd in KDE or esd in Gnome)?



gfdsa wrote:
here is relevant section of defsd.conf:
Code:

LOOKUP          snd          MODLOAD ACTION snd
LOOKUP          dsp          MODLOAD
LOOKUP          mixer        MODLOAD
LOOKUP          midi         MODLOAD
REGISTER        sound/.*     PERMISSIONS root.audio 660
REGISTER        snd/.*       PERMISSIONS root.audio 660

and imho its not permissions:
Code:

ls -l /dev/sound/
total 0
crw-rw----    1 root     audio     14,   3 Jan  1  1970 dsp
crw-rw----    1 root     audio     14,   0 Jan  1  1970 mixer

i tried to cat things to /dev/sound/dsp, usually it results in sound, in my case it stucks...
my user is in audio group, root as i see does not have to be
Back to top
View user's profile Send private message
fidler
Apprentice
Apprentice


Joined: 03 Jul 2002
Posts: 162
Location: Utah

PostPosted: Tue Sep 03, 2002 11:10 pm    Post subject: Reply with quote

Did you make sure your sound card was unmuted??? That is the first place I would check.

Check the Desktop documentation on how to do this.
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 4:39 am    Post subject: Reply with quote

yes. i use artsd, it does not work, i use cat sometext >/dev/sound/dsp - does not work either....
Should i look into Desktop docs if it does not work in console?

im seriosly going crazy on it.. ecompiled kernel 14 times....
alsa-driver recompiled from portage twice, last tarball from alsa project fails to compile, and portage's one segmentationsfaults after compiling.

Im doomed, what do i need this pice of iron for, if it doesnt play music???
:-(
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 4:45 am    Post subject: Reply with quote

looks to you i should subscribe to kernel mailing list and ask there?
Back to top
View user's profile Send private message
masseya
Bodhisattva
Bodhisattva


Joined: 17 Apr 2002
Posts: 2602
Location: Raleigh, NC

PostPosted: Wed Sep 04, 2002 6:47 am    Post subject: Reply with quote

I have an intel i810 working very well with alsa. Is there a reason that you don't want to use alsa?
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am..
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 6:51 am    Post subject: Reply with quote

Tristam29 wrote:
I have an intel i810 working very well with alsa. Is there a reason that you don't want to use alsa?

gfdsa wrote:

alsa-driver recompiled from portage twice, last tarball from alsa project fails to compile, and portage's one segmentationsfaults after compiling.
Back to top
View user's profile Send private message
masseya
Bodhisattva
Bodhisattva


Joined: 17 Apr 2002
Posts: 2602
Location: Raleigh, NC

PostPosted: Wed Sep 04, 2002 7:08 am    Post subject: Reply with quote

Heh, didn't see that. :oops: Guess it's about time to go to sleep.

Have you tried masking the newer version of alsa to see if the older one still works? Just add a line to /usr/portage/profiles/package.mask and then try emerging it.
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am..
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 8:29 am    Post subject: Reply with quote

Thanks
ill try asap, but im pretty sure im missing somthing on a lower level.... smthng with devfs or kernel.... irq's or smthing
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Wed Sep 04, 2002 12:55 pm    Post subject: Reply with quote

The point about artsd --- are you sure you aren't using artsd at the same time you try to cat to /etc/dsp?

Dumb question, but somedody should ask...

My sound is also a i810. I'm running 2.4.19-r8. I was looking at your dmesg output and I found that you don't have something like my second line. Are you share you have everything correctly compiled into your kernel? Like ICH sound, irq sharing (don't remember if you need a special option for it) et al?

Code:

Intel 810 + AC97 Audio, version 0.21, 14:57:18 Aug 30 2002
PCI: Enabling device 00:1f.5 (0000 -> 0001)
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 02:00.1
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x18c0 and 0x1c00, IRQ 11
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4352:0x5936 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2



gfdsa wrote:
Thanks
ill try asap, but im pretty sure im missing somthing on a lower level.... smthng with devfs or kernel.... irq's or smthing
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 1:06 pm    Post subject: Reply with quote

i didnt start X when i checked, so artsd is out of the game, anyway even if it was running i shoul get "device busy" or like that...

Thats the question.. about the kernel, im not shure about it, but ill check about sharing irq's, ill check, ich i dont remember config remining it at all

not at home now...
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Wed Sep 04, 2002 2:03 pm    Post subject: Reply with quote

I think you should look for these in .config file

Code:


CONFIG_IDEPCI_SHARE_IRQ=y
....

CONFIG_SOUND_ICH=y




gfdsa wrote:
i didnt start X when i checked, so artsd is out of the game, anyway even if it was running i shoul get "device busy" or like that...

Thats the question.. about the kernel, im not shure about it, but ill check about sharing irq's, ill check, ich i dont remember config remining it at all

not at home now...
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Wed Sep 04, 2002 3:32 pm    Post subject: Reply with quote

Code:

CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_SOUND=m
CONFIG_SOUND_ICH=m


IMHO CONFIG_IDEPCI_SHARE_IRQ=y goes for IDE
Back to top
View user's profile Send private message
masseya
Bodhisattva
Bodhisattva


Joined: 17 Apr 2002
Posts: 2602
Location: Raleigh, NC

PostPosted: Wed Sep 04, 2002 9:25 pm    Post subject: Reply with quote

I take it that masking the latest version of alsa didn't work?
_________________
if i never try anything, i never learn anything..
if i never take a risk, i stay where i am..
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Wed Sep 04, 2002 9:35 pm    Post subject: Reply with quote

I think so... I was in a hurry :oops:

gfdsa wrote:
Code:

CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_SOUND=m
CONFIG_SOUND_ICH=m


IMHO CONFIG_IDEPCI_SHARE_IRQ=y goes for IDE
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Thu Sep 05, 2002 2:54 pm    Post subject: Reply with quote

didnt try alsa yet, and im almost sure that its irq sharing issue, tried to play with it in bios, nothing, compiled kernel without usb which is shared with ICH, but Pkernel's PCI still reports about sharing and sound does not work...
Back to top
View user's profile Send private message
fidler
Apprentice
Apprentice


Joined: 03 Jul 2002
Posts: 162
Location: Utah

PostPosted: Thu Sep 05, 2002 5:11 pm    Post subject: Reply with quote

You may have to enable ACPI depending on how new your computer is.

With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card.
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Thu Sep 05, 2002 5:28 pm    Post subject: Reply with quote

fidler wrote:
You may have to enable ACPI depending on how new your computer is.

With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card.


This one makes sense!!!
I didnt enable it, not that i know what good in this feature, but i'll try it today, btw, can you drop me your .config to gfdsa at gfdsa dot org? I'll be very oblige to you.
Back to top
View user's profile Send private message
fidler
Apprentice
Apprentice


Joined: 03 Jul 2002
Posts: 162
Location: Utah

PostPosted: Thu Sep 05, 2002 6:43 pm    Post subject: Reply with quote

gfdsa wrote:
fidler wrote:
You may have to enable ACPI depending on how new your computer is.

With my coupter (also i810) you have to compile ACPI into the computer for it to recoginze the sound card. It could be the same with your sound card.


This one makes sense!!!
I didnt enable it, not that i know what good in this feature, but i'll try it today, btw, can you drop me your .config to gfdsa at gfdsa dot org? I'll be very oblige to you.


Well, the good is that it allows your sound card to work ;) And that it manages power, and events that occur on your computer.

By the way if the mp3s play *real* fast it may be that your plugin is for diskwriter, which writes the mp3s to wav files.
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Thu Sep 05, 2002 7:28 pm    Post subject: Reply with quote

mmmmm
i dont think
Code:

mpg321 file.mp3

diskwrites anything, only swap may be affected :-)[/code]
Back to top
View user's profile Send private message
gfdsa
n00b
n00b


Joined: 01 Jul 2002
Posts: 74

PostPosted: Sat Sep 07, 2002 1:10 pm    Post subject: Reply with quote

well... listening to mp3s now :-)))))))

i recompiled kernel with acpi, kernel's driver still didnt work, but then i recompiled alsa's ones, works perfectly :-)))))

ICH sux anyway, but alsa rulez

Thank you all for help, love you, peace !
Back to top
View user's profile Send private message
fidler
Apprentice
Apprentice


Joined: 03 Jul 2002
Posts: 162
Location: Utah

PostPosted: Mon Sep 09, 2002 1:13 pm    Post subject: Reply with quote

To make it work with the kernel drivers you have to add a line to your modules.autoload.

I think it is:

intel_8x0

But I don't know because I use alsa
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum