View previous topic :: View next topic |
Author |
Message |
torque2k3 n00b
Joined: 09 Oct 2003 Posts: 10 Location: Grand Rapids, MI
|
Posted: Thu Jan 27, 2005 1:10 pm Post subject: |
|
|
I've got the same Belkin card (version 3000), and I'm just downloading the latest ndiswrapper now on my Windows box to transfer to a fresh 2004.3 install. I'm hoping to not have this issue pop up for me as well... consider this a courtesy bump!
How are you accessing PCMCIA slots on your machine, and with what kernel? For instance, I'm using the included kernel-2.4.26-gentoo-r9 (gentoo-sources), and hand-configured it to NOT include PCMCIA support but INCLUDE wireless support (built-in, not module). |
|
Back to top |
|
|
narcis.gratianu n00b
Joined: 21 Nov 2004 Posts: 60
|
Posted: Thu Jan 27, 2005 2:39 pm Post subject: |
|
|
The Belkin card is a PCI device, so, it will show up in lspci command even if you do not the pcmcia package compiled. _________________ Best regards,
Narcis GRATIANU |
|
Back to top |
|
|
orgon3 n00b
Joined: 13 Feb 2005 Posts: 6
|
Posted: Thu Feb 17, 2005 3:46 am Post subject: So, probably missing something obvious but... |
|
|
I have a centrino and using w70n51.inf (along with the .sys and .dll file). I am using vanillia 2.6.10-r1 and I had emerged ndiswrapper .12 r3 I believe it was (might have the wrong r, but definately .12). I originally had a problem with 4STACKS but fixed it. Now everything works fine UNTIL i modprobe ndiswrapper. When I do this the kernel hangs. I can't type anything (kernel is unresponsive) into any terminal or end X. I have tried to uninstall and reinstalling, but it is always the same end result. Any suggestions would be much appreciated.[/u] |
|
Back to top |
|
|
Aynjell Veteran
Joined: 28 Jun 2004 Posts: 1117
|
Posted: Fri Feb 18, 2005 7:36 pm Post subject: |
|
|
Thanks for the howto. With your help, I had wireless up and running and getting my sync on in 5 minutes. Good work... _________________ CPU: 3800+ X2 (2.5Ghz)
GPU: eVGA 7600GT (640/1700)
MOBO: DFI SLI-DR (Surprisingly good!)
RAM: 2 x OCZ Gold 1024 DDR500 3-4-3-7 (2048)
HDD: Western Digital Raptor |
|
Back to top |
|
|
yatesco Tux's lil' helper
Joined: 17 May 2002 Posts: 113 Location: England
|
Posted: Mon Feb 21, 2005 5:04 pm Post subject: Re: So, probably missing something obvious but... |
|
|
I had this problem as well. It seems that *whilst* it has hung, you can still change virtual terms, and I found that if I press the hardware button to turn on the wireless device it works.
orgon3 wrote: | I have a centrino and using w70n51.inf (along with the .sys and .dll file). I am using vanillia 2.6.10-r1 and I had emerged ndiswrapper .12 r3 I believe it was (might have the wrong r, but definately .12). I originally had a problem with 4STACKS but fixed it. Now everything works fine UNTIL i modprobe ndiswrapper. When I do this the kernel hangs. I can't type anything (kernel is unresponsive) into any terminal or end X. I have tried to uninstall and reinstalling, but it is always the same end result. Any suggestions would be much appreciated.[/u] |
_________________ Truth lasts longer than lip service
yatesco.blogspot.com
http://homepage.ntlworld.com/colin.yates/ |
|
Back to top |
|
|
kevenal n00b
Joined: 24 Feb 2005 Posts: 5
|
Posted: Tue Mar 01, 2005 5:33 am Post subject: |
|
|
success
I got my Belkin F5D700 work
used the exe file from Dell. run the exe file and get a file named ar
used the bcmwl5.inf and bcmwl5.sys
and ndiswrapper -i bcmwl5.inf
and everthing runs fine
I first tried cp only bcmwl5.inf, and failed. after cp the bcmwl5.sys
I am done
machine: Dell Dimension 8400
good luck you all. |
|
Back to top |
|
|
Mortman n00b
Joined: 05 Mar 2005 Posts: 9
|
Posted: Sat Mar 05, 2005 12:48 am Post subject: |
|
|
Alright, I'm relatively new to Linux (read: n00b) and I can't get ndiswrapper to work.
I get the error:
Code: | # modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.10-gentoo-r6/misc/ndiswrapper.ko): Invalid module format |
and dmesg says:
Code: | ndiswrapper: version magic '2.6.10-gentoo-r6 SMP preempt PENTIUM4 gcc-3.3' should be '2.6.10-gentoo-r6 SMP preempt PENTIUM4 4KSTACKS gcc-3.3' |
I've tried running "update-modules", but it doesn't solve any of the problems. Same thing happens afterwards. Any help would be much appreciated. |
|
Back to top |
|
|
lothar Tux's lil' helper
Joined: 10 Mar 2004 Posts: 87 Location: Norway
|
Posted: Mon Mar 14, 2005 7:31 am Post subject: |
|
|
Mortman wrote: | Alright, I'm relatively new to Linux (read: n00b) and I can't get ndiswrapper to work.
I get the error:
Code: | # modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.10-gentoo-r6/misc/ndiswrapper.ko): Invalid module format |
and dmesg says:
Code: | ndiswrapper: version magic '2.6.10-gentoo-r6 SMP preempt PENTIUM4 gcc-3.3' should be '2.6.10-gentoo-r6 SMP preempt PENTIUM4 4KSTACKS gcc-3.3' |
I've tried running "update-modules", but it doesn't solve any of the problems. Same thing happens afterwards. Any help would be much appreciated. |
I also got this error when I'd compiled ndiswrapper on a different kernel then I was running.. For example if I compiled the kernel, then upgraded the kernel.. Then I would get that error..
Just re-compile ndiswrapper
|
|
Back to top |
|
|
lothar Tux's lil' helper
Joined: 10 Mar 2004 Posts: 87 Location: Norway
|
Posted: Mon Mar 14, 2005 8:21 am Post subject: Ndiswrapper and network bridge |
|
|
I've succesfully made ndiswrapper work..
I get ip via dhcp from the wireless router and i get a good ping time..
But I need to set up a network bridge with a ordinary ethernet card and a wireless card.
I made a bridge and added eth0 and wlan0..
I "upped" the devices
Code: | ifconfig eth0 up
ifconfig wlan0 up
|
And finally I upped the bridge and started dhcpcd
Code: | ifconfig br0 up
dhcpcd br0
|
I recieved a IP-adress from the router, but I could not ping for example www.google.com or the router (10.0.0.1).
I got ping response from computers on the network connected to eth0, but none connected to the wlan..
What could be wrong? It works fine when I'm not bridging it... Has anyone successfully made a wlan>eth bridge? Please help.. I have to use windows XP to make a wlan to ethernet bridge and that blows.. Its the only windows machine I've got left, and I can't wait to throw it away. |
|
Back to top |
|
|
mantheorem Tux's lil' helper
Joined: 14 Mar 2005 Posts: 83 Location: (hd0) Boot Sector
|
Posted: Fri Mar 18, 2005 1:00 am Post subject: How? |
|
|
How do you do step 2 of this ndiswrapper howto:
2. Kernel Setup
DISABLE support for SMP in kernel. (This is very important, many headaches will be spared by doing so)
I guess my specific question is about how to disable support for SMP in the kernel? _________________ Peace. Love. Gentoo. |
|
Back to top |
|
|
egberts Guru
Joined: 04 Nov 2003 Posts: 357 Location: Dimmed Cathode Ray Tube
|
Posted: Fri Mar 18, 2005 1:29 am Post subject: DWL G630 version c |
|
|
D-Link DWL G630 version c works in Linux native mode! r00t! _________________ Clusters of Fry's Special, AMD 2200, 2 GB DDR, 220 GB (2008.1/desktop, stage 1, -O3) x8
HP Compaq Fry's SPecial, AMD 2100, 2 GB DDR, 260 GB (2008.0/server, stage 1, -O3)
Ultra Sparc 5, 256MB, 3GB (2006.1/server, stage 1, -O3) |
|
Back to top |
|
|
bsam n00b
Joined: 01 Mar 2005 Posts: 14
|
Posted: Fri Mar 18, 2005 2:23 am Post subject: Re: How? |
|
|
mantheorem wrote: | How do you do step 2 of this ndiswrapper howto:
2. Kernel Setup
DISABLE support for SMP in kernel. (This is very important, many headaches will be spared by doing so)
I guess my specific question is about how to disable support for SMP in the kernel? |
in the menuconfig for your kernel, go to Processor type and features --->
and then its listed as "Symetric multi-processing support" disable that
there ya go!
good luck!
oh yeah, you're also gonna have to recompile and install your kernel as well. |
|
Back to top |
|
|
mantheorem Tux's lil' helper
Joined: 14 Mar 2005 Posts: 83 Location: (hd0) Boot Sector
|
Posted: Fri Mar 18, 2005 2:25 am Post subject: |
|
|
Thanks! _________________ Peace. Love. Gentoo. |
|
Back to top |
|
|
bicho n00b
Joined: 22 Dec 2003 Posts: 14
|
Posted: Fri Mar 18, 2005 8:54 am Post subject: |
|
|
I've install ndiswrapper and detect correctly wlan0, but i can't get an IP address and when i ping to 192.168.1.1 (router) get the message : "network is unreachable".
Any idea, please, |
|
Back to top |
|
|
mantheorem Tux's lil' helper
Joined: 14 Mar 2005 Posts: 83 Location: (hd0) Boot Sector
|
Posted: Fri Mar 18, 2005 6:03 pm Post subject: Error calling "unlink" in "Global" |
|
|
When i boot up, and my computer is loading ndiswrapper, I get the following error:
Code: |
error calling: "unlink" in "Global"
|
It lists this error twice and then continues loading modules and finishes booting. Does anyone know how to fix this problem? _________________ Peace. Love. Gentoo. |
|
Back to top |
|
|
Poju n00b
Joined: 03 Mar 2005 Posts: 5
|
Posted: Fri Mar 18, 2005 9:17 pm Post subject: |
|
|
Msi PC11B2 (rt2400) work's fine, well i just installed it from work with putty, but so far so good.
(i dont use encryption just mac filttering) |
|
Back to top |
|
|
dje n00b
Joined: 11 Jan 2004 Posts: 5 Location: Clearwater, FL
|
Posted: Sun Mar 20, 2005 9:58 am Post subject: |
|
|
I have my pcmcia/wireless card setup working with an Orinoco silver card. But I also have a Linksys wpc54g V2 and I cannot get the card to load properly. I downloaded wpc54gv2_driver_utility_v2.02.zip from the ndiswrapper list. There were a few .inf's and .sys's, the first I tried didnt work which was lsbcmnds.inf, it would load but not find the hardware. Then I tried LSTINDS.INF, it found the hardware so I attempted to load ndiswrapper. When loaded in dmesg it gave me some error about the windows driver not intializing, I have been unable to find anything on how to fix it. Here is all the useful info, if anyone can help me I would much rather have my G card work than my B card.
BTW I emerged ndiswrapper from portage rather than building the latest from their site, would grabbing the latest from their site fix this?
Code: |
5150 windrivers # lspci |grep Network
0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
|
Code: | 5150 windrivers # ndiswrapper -l
Installed ndis drivers:
lsbcmnds driver present
lstinds driver present, hardware present
|
Code: |
5150 windrivers # dmesg |grep ndiswrapper
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
ndiswrapper: driver lstinds (Linksys,03/10/2004,6.0.0.18) loaded
ndiswrapper (ndiswrapper_add_one_pci_dev:188): Windows driver couldn't initialize the device (C0000001)
ndiswrapper: probe of 0000:03:00.0 failed with error -22
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
ndiswrapper: driver lstinds (Linksys,03/10/2004,6.0.0.18) loaded
ndiswrapper (ndiswrapper_add_one_pci_dev:188): Windows driver couldn't initialize the device (C0000001)
ndiswrapper: probe of 0000:03:00.0 failed with error -22
ndiswrapper version 1.1 loaded (preempt=yes,smp=no)
ndiswrapper: driver lstinds (Linksys,03/10/2004,6.0.0.18) loaded
ndiswrapper (ndiswrapper_add_one_pci_dev:188): Windows driver couldn't initialize the device (C0000001)
ndiswrapper: probe of 0000:03:00.0 failed with error -22
ndiswrapper (ndiswrapper_add_one_pci_dev:188): Windows driver couldn't initialize the device (C0000001)
ndiswrapper: probe of 0000:03:00.0 failed with error -22
|
I have seen the above error in few other places but no solution. |
|
Back to top |
|
|
cs.cracker n00b
Joined: 06 Mar 2005 Posts: 62
|
Posted: Sun Jun 26, 2005 6:47 am Post subject: |
|
|
I am having an issue with my Linksys WPC54G wireless pcmcia card. I emerged ndiswrapper, and set it up according to the first post. The card appears to be working fine, as the power LED on the card lights up, and there are no errors on bootup. However, when I go to set the ssid using iwconfig wlan0 essid <essid> my system goes berserk, spitting out messages so fast I cant even read them. they go along the lines of this:
<c023402523> awfasjngijgnapwioejgnawipejgnawegnaewg [ndiswrapper]
Where the numbers are a repeating pattern of hex numbers and the random letters are illegible messages (they are scrolling too fast to read on my LCD panel). It appears to be caught in an endless error-loop. I cant break, switch terminals, nothing. The only thing I can do is hard reset. |
|
Back to top |
|
|
rorry n00b
Joined: 29 Jun 2005 Posts: 1
|
Posted: Wed Jun 29, 2005 9:08 pm Post subject: |
|
|
The howto is good and very detailed so I hoped on getting my wireless card up and running but I got some errors when I do
#modprobe ndiswrapper
/lib/modules/2.4.22-gentoo-r3/misc/ndiswrapper.o: unresolved symbol pci_set_consistent_dma_mask
/lib/modules/2.4.22-gentoo-r3/misc/ndiswrapper.o: insmod /lib/modules/2.4.22-gentoo-r3/misc/ndiswrapper.o failed
/lib/modules/2.4.22-gentoo-r3/misc/ndiswrapper.o: insmod ndiswrapper failed
I get thoose errors. I'm running, 2.4.22-gentoo-r3 the card is a D-Link DWL-510 and should work since it's listed.
If anyone could take the time to help a noobie I would be a happy boy |
|
Back to top |
|
|
SilentK Tux's lil' helper
Joined: 02 Oct 2005 Posts: 80
|
Posted: Sun Oct 02, 2005 7:18 pm Post subject: |
|
|
I am also having some problems with modprobe. I have been trying to get my Linksys WMP54GS card working and everything went well up to the modprobe stage however once there and I execute
Code: |
modprobe ndiswrapper
|
It totally locks up and I have to reboot.
Also for some stupid reason I executed this
Code: |
echo "ndiswrapper" >> /etc/modules.autoload.d/kernel-<version>
|
even though modprobe didn't work (big mistake) so now gentoo hangs when I boot it. How do I unload the module from the boot process and what do I need to do to succesfully execute modprobe ndiswrapper? |
|
Back to top |
|
|
John-Boy Guru
Joined: 23 Jun 2004 Posts: 442 Location: Desperately seeking moksha in all the wrong places
|
Posted: Mon Oct 03, 2005 4:49 am Post subject: |
|
|
SilentK wrote: | I am also having some problems with modprobe. I have been trying to get my Linksys WMP54GS card working and everything went well up to the modprobe stage however once there and I execute
Code: |
modprobe ndiswrapper
|
It totally locks up and I have to reboot.
Also for some stupid reason I executed this
Code: |
echo "ndiswrapper" >> /etc/modules.autoload.d/kernel-<version>
|
even though modprobe didn't work (big mistake) so now gentoo hangs when I boot it. How do I unload the module from the boot process and what do I need to do to succesfully execute modprobe ndiswrapper? |
Remove the entry from /etc/modules.autoload.d/kernel, if you've got hotplug installed then that'll load ndiswrapper for you when needed. What driver are you using with ndiswrapper ?
Edit - If you can't access your install, then you'll need a live CD handy. _________________ Like the Roman, I seem to see "the River Tiber foaming with much blood" |
|
Back to top |
|
|
EternalNewbye n00b
Joined: 11 Mar 2005 Posts: 38
|
Posted: Mon Oct 10, 2005 11:19 am Post subject: My success story |
|
|
hi everyone
Just wanted to say that I managed to get it running on a zv5000 HP labtop, with amd64.
My card is a "Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)" (from lspci), and I used the 64b drivers from linuxant and wireless-tools.
The install was straightforward, and once I figured out what I needed to do, I didn't meet any problem on the path to a world without f******g wires.
The connection seems to be quite stable.
Since ndiswrapper is masked by ~amd64 in portage, I wonder if there is some kind of mail/form/forum where I can tell the gentoo guys "hey it's working with my computer's hardware" ? |
|
Back to top |
|
|
proxyroot n00b
Joined: 21 Jun 2005 Posts: 18
|
Posted: Tue Oct 18, 2005 1:29 am Post subject: |
|
|
alrighty dudes,,
im not sure if these are errors but nothing said fatal or what not.....
hopefully some body can make a pointer as i folowed the instructions strictly, nothing is apparent or at least to my eye....
Code: |
bash-2.05b# ndiswrapper -l
Unknown line at line 5568
Unknown line at line 5569
Unknown line at line 5570
Unknown line at line 5571
Unknown line at line 5572
Unknown line at line 5573
Unknown line at line 5574
Unknown line at line 5575
Unknown line at line 5576
Unknown line at line 5577
Unknown line at line 5578
Unknown line at line 5579
Unknown line at line 5580
Unknown line at line 5581
Unknown line at line 5582
Unknown line at line 5583
Unknown line at line 5584
Unknown line at line 5585
Unknown line at line 5586
Unknown line at line 5587
Unknown line at line 5588
Unknown line at line 5589
Unknown line at line 5590
Unknown line at line 5591
Unknown line at line 5592
Unknown line at line 5593
Unknown line at line 5594
Unknown line at line 5595
Unknown line at line 5596
Unknown line at line 5597
Unknown line at line 5598
Unknown line at line 5599
Unknown line at line 5600
Unknown line at line 5601
Unknown line at line 5602
Unknown line at line 5603
Installed ndis drivers:
neti2220 driver present, hardware present
|
Code: |
bash-2.05b# modprobe ndiswrapper
|
Code: | bash-2.05b# dmesg
Bootdata ok (command line is root=/dev/hda3 init=/linuxrc vga=0x318 video=radeonfb:mtrr,ywrap clock=pmtmr udev)
Linux version 2.6.11-gentoo-r11 (root@tux) (gcc version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 SMP Wed Oct 5 20:35:58 IST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 MSI ) @ 0x00000000000f83b0
ACPI: RSDT (v001 MSI 1029 0x07152005 MSFT 0x00000097) @ 0x000000003ff40000
ACPI: FADT (v002 MSI 1029 0x07152005 MSFT 0x00000097) @ 0x000000003ff40200
ACPI: MADT (v001 MSI OEMAPIC 0x07152005 MSFT 0x00000097) @ 0x000000003ff40300
ACPI: WDRT (v001 MSI MSI_OEM 0x07152005 MSFT 0x00000097) @ 0x000000003ff40360
ACPI: MCFG (v001 MSI OEMMCFG 0x07152005 MSFT 0x00000097) @ 0x000000003ff403b0
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x000000003ff434c0
ACPI: OEMB (v001 MSI MSI_OEM 0x07152005 MSFT 0x00000097) @ 0x000000003ff50040
ACPI: DSDT (v001 MSI 1029 0x07152005 INTL 0x02002026) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003ff40000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000003ff40000
No mptable found.
On node 0 totalpages: 261952
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257856 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda3 init=/linuxrc vga=0x318 video=radeonfb:mtrr,ywrap clock=pmtmr udev console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1790.887 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1022736k/1047808k available (3441k kernel code, 0k reserved, 1370k data, 224k init)
Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Turion(tm) 64 Mobile Technology MT-32 stepping 02
per-CPU timeslice cutoff: 511.98 usecs.
task migration cache decay timeout: 1 msecs.
Only one processor found.
Using local APIC timer interrupts.
Detected 12.436 MHz APIC timer.
time.c: Using PIT/TSC based timekeeping.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 6)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
inotify device minor=63
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
NTFS driver 2.1.22 [Flags: R/W DEBUG].
SGI XFS with ACLs, large block/inode numbers, no debug enabled
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000100000, using 6144k, total 16384k
vesafb: mode is 1024x768x32, linelength=4096, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (68 C)
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio2
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Ethernet Channel Bonding Driver: v2.6.1 (October 29, 2004)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc20000006c00, 00:0c:76:f8:ba:8a, IRQ 18
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Losing some ticks... checking if CPU frequency changed.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0804H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-K15, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 19
Yenta: CardBus bridge found at 0000:02:04.0 [1462:0291]
Yenta: ISA IRQ mask 0x04b8, PCI irq 19
Socket status: 30000006
ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 20
Yenta: CardBus bridge found at 0000:02:04.1 [1462:0291]
Yenta: ISA IRQ mask 0x04b8, PCI irq 20
Socket status: 30000006
Databook TCIC-2 PCMCIA probe: not found.
I2O subsystem v$Rev$
i2o: max drivers = 8
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
cpu_init done, current fid 0xa, vid 0x8
powernow-k8: ph2 null fid transition 0xa
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 224k freed
EXT3 FS on hda3, internal journal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 917 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[fglrx] module loaded - fglrx 8.14.13 [Jun 8 2005] on minor 0
NTFS volume version 3.1.
Disabled Privacy Extensions on device ffffffff8055fb40(lo)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: irq 19, pci mem 0xfbdfd000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: irq 19, pci mem 0xfbdfe000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-3: new full speed USB device using ohci_hcd and address 2
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: irq 19, pci mem 0xfbdff000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usb 2-3: USB disconnect, address 2
usb 2-3: new full speed USB device using ohci_hcd and address 3
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00007e572c]
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
USB Universal Host Controller Interface driver v2.2
[fglrx] free PCIe = 51118080
[fglrx] max PCIe = 51118080
[fglrx] free LFB = 119762944
[fglrx] max LFB = 119762944
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
APIC error on CPU0: 00(40)
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ndiswrapper version 1.2 loaded (preempt=no,smp=yes)
ndiswrapper (ndiswrapper_load_driver:93): loadndiswrapper failed (65280); check system log for messages from 'loadndisdriver'
warning: many lost ticks.
Your time source seems to be instable or some driver is hogging interupts
rip _spin_unlock_irqrestore+0x5/0x10
|
Code: |
oadndiswrapper failed (65280)
|
is that a problem with the compile?
needless to ssay WLAN does ot show up in my dmesg..
by the way amd64 hense all the time problems.....
ticks etc, working on that aswell
thanks prox. |
|
Back to top |
|
|
Ghotcom n00b
Joined: 18 Nov 2005 Posts: 15
|
Posted: Fri Nov 18, 2005 1:32 am Post subject: |
|
|
Can I post a success story ?
My first attempt to get this card working was through the use of the linux opensource driver rt2500 by serialmonkey, but it failed. Projet seems in the process of rebuilding the drivers, so...
I then turned to Ndiswrapper, installation went like a charm and i could see dmesg displaying happy ndiswrapper logs, i could even see the wlan0 interface -AP was detected automatically for me- using iwconfig. However, the link status showed 0/100. This gave me headaches as I suspected quite everything to be responsible...But it was kernel configs that prevented it to communicate, i could spot it. I had to disable CONFIG_PREEMPT -SMP was already- in the kernel. Now I have the maximum link rate 100/100
That s why you might keep an eye on preempt status when troubleshooting
**Ca waaaaax now**
CONFIG_PREEMPT CONFIG_SMP disabled is a good idea |
|
Back to top |
|
|
jackuto n00b
Joined: 05 Apr 2005 Posts: 27
|
Posted: Tue Nov 29, 2005 10:17 am Post subject: new version of ndiswrapper emerge from gentoo server wg311v2 |
|
|
ndiswrapper version 1.2 loaded (preempt=no,smp=no)
ndiswrapper (wrapper_init:1531): loadndiswrapper failed (1792); check system log for messages from 'loadndisdriver'
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ndiswrapper version 1.2 loaded (preempt=no,smp=no)
ndiswrapper: driver wg311v2 (NETGEAR, Inc.,06/17/2004,6.0.5.30) loaded
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
ndiswrapper (ndiswrapper_add_pci_device:218): Windows driver couldn't initialize the device (C0000001)
ndiswrapper: probe of 0000:00:0a.0 failed with error -22
after i install ndiswrapper and installed necessary driver: wg311v2.inf from the driver provided.
whats really wrong here?
my kernel version is: Linux localhost 2.6.11-gentoo-r3 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|