Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
2.6.1-love3 "Watch the love!"
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6  Next  
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
bAnTAi
n00b
n00b


Joined: 22 Dec 2003
Posts: 15

PostPosted: Mon Jan 12, 2004 7:51 pm    Post subject: Reply with quote

Anyone that can answer my question on my previous post?
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Mon Jan 12, 2004 7:54 pm    Post subject: Reply with quote

Try deleting /usr/portage/distfiles/2.6.1-love3.patch.bz2 and /usr/local/portage/sys-kernel/love-sources/files/digest-love-sources-2.6.1-r3, then run "ebuild love-sources-2.6.1-r3.ebuild digest" again. Hopefully after that you should be able to emerge normally.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
jobeus
n00b
n00b


Joined: 17 Mar 2003
Posts: 52

PostPosted: Mon Jan 12, 2004 8:41 pm    Post subject: Omnibook! Reply with quote

Why wasn't it mentioned that the omnibook module is in here? :) I can finally (hopefully) get my Toshiba laptop working properly again (temperature monitoring and stuff)... The omnibook ebuild wouldn't seem to work with 2.6... Neat! ;)
_________________
http://jobe.ca
Back to top
View user's profile Send private message
steel300
Veteran
Veteran


Joined: 10 Jul 2003
Posts: 1155

PostPosted: Mon Jan 12, 2004 8:44 pm    Post subject: Reply with quote

It was mentioned. Look at the line for Radeon IGP. I found a patch that has four things in one. Omnibook was one of them.
_________________
Rationality is the recognition of the fact that nothing can alter the truth and nothing can take precedence over that act of perceiving it.
Back to top
View user's profile Send private message
PrakashP
Veteran
Veteran


Joined: 27 Oct 2003
Posts: 1249
Location: C.C.A.A., Germania

PostPosted: Mon Jan 12, 2004 8:54 pm    Post subject: Reply with quote

@Wedge_

Though asmon has a very much different system then me, I can't easily make out, what may be the cause. And as my time is limited (busy with diploma) I'll wait for mm3 based love sources and give it a try in the hope it got fixed.
Back to top
View user's profile Send private message
Pink
Veteran
Veteran


Joined: 24 Jul 2003
Posts: 1062

PostPosted: Mon Jan 12, 2004 8:55 pm    Post subject: Reply with quote

Compiled fine but had hard lock up within a minute or so.

I applied the nforce2-apic-fix.patch wedge posted by wedge in the 2.6.1-love1 thread.

I had to reboot into an older kernel to apply the patch, so I am not sure if it was actually needed (an 'athcool stat' command reports that it is disabled, but it would be once the patch was applied!) but all is well (for the moment....)

Maybe this will help others if they are getting any lockups with nforce2 :?
Back to top
View user's profile Send private message
ed0n
l33t
l33t


Joined: 23 Apr 2003
Posts: 638
Location: Prishtine/Kosove

PostPosted: Mon Jan 12, 2004 9:03 pm    Post subject: Reply with quote

First of all OneofOne thanks , the sources are great.

Second of all ;) I have a question for you.
Can anyone tell me why when I am trying to rmmod a module its segfaulting
It is segfaulting with 2.6.1-love1/2/3 and with module-init-tools-0.9.15_pre4/
module-init-tools-3.0_pre5.

Edon
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Mon Jan 12, 2004 9:08 pm    Post subject: Reply with quote

ed0n wrote:
Can anyone tell me why when I am trying to rmmod a module its segfaulting
It is segfaulting with 2.6.1-love1/2/3 and with module-init-tools-0.9.15_pre4/
module-init-tools-3.0_pre5.

Does anything appear in dmesg? Do you have module unloading support in the kernel? (sorry, had to ask :P)
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
Jazz
Guru
Guru


Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia

PostPosted: Mon Jan 12, 2004 9:11 pm    Post subject: Reply with quote

Ok i get the following error in dmesg.... any guesses ??
Quote:

devfs: boot_options: 0x0
Loading Reiser4. See www.namesys.com for a description of Reiser4.
SGI XFS for Linux with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 75071 bytes, found (1280x1024, 26385 bytes, v3).
Console: switching to colour frame buffer device 153x54
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380023A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-500M B00, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdc: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
cdrom: : unknown mrw mode page
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(66)
Console: switching to colour frame buffer device 153x54
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.1 (Tue Dec 30 10:04:14 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Sound Blaster Live! (rev.7) at 0xd800, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda8) for (hda8)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding 409616k swap on /dev/hda9. Priority:-1 extents:1
SCSI subsystem initialized
st: Version 20031228, fixed bufsize 32768, s/g segs 256
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:00.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xd880. Vers LK1.1.19
eth0: Dropping NETIF_F_SG since no checksum feature.
NTFS driver 2.1.5 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
blk: queue c1756e00, I/O limit 4095Mb (mask 0xffffffff)
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e09fec00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 9, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 0 changed to on
hub 2-0:1.0: new USB device on port 1, assigned address 2
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c031b71c>] splash_prepare+0x188/0x350
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

bootsplash 3.1.3-2003/11/14: looking for picture....Badness in vc_allocate at drivers/char/vt.c:680
Call Trace:
[<c02da856>] vc_allocate+0x1a4/0x1a9
[<c031b46a>] splash_getraw+0x890/0x895
[<c015fb92>] link_path_walk+0x612/0x908
[<c015f05c>] permission+0x2f/0x4b
[<c01531b0>] get_empty_filp+0x68/0xd4
[<c031bfcd>] splash_write_proc+0x430/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 1 changed to on
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

Badness in set_origin at drivers/char/vt.c:573
Call Trace:
[<c02da3b5>] set_origin+0xb0/0xb5
[<c02dab21>] vc_resize+0x2c6/0x4f7
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

bootsplash 3.1.3-2003/11/14: looking for picture....Badness in vc_allocate at drivers/char/vt.c:680
Call Trace:
[<c02da856>] vc_allocate+0x1a4/0x1a9
[<c031b46a>] splash_getraw+0x890/0x895
[<c015fb92>] link_path_walk+0x612/0x908
[<c015f05c>] permission+0x2f/0x4b
[<c01531b0>] get_empty_filp+0x68/0xd4
[<c031bfcd>] splash_write_proc+0x430/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 2 changed to on
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

Badness in set_origin at drivers/char/vt.c:573
Call Trace:
[<c02da3b5>] set_origin+0xb0/0xb5
[<c02dab21>] vc_resize+0x2c6/0x4f7
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

bootsplash 3.1.3-2003/11/14: looking for picture....Badness in vc_allocate at drivers/char/vt.c:680
Call Trace:
[<c02da856>] vc_allocate+0x1a4/0x1a9
[<c031b46a>] splash_getraw+0x890/0x895
[<c015fb92>] link_path_walk+0x612/0x908
[<c015f05c>] permission+0x2f/0x4b
[<c01531b0>] get_empty_filp+0x68/0xd4
[<c031bfcd>] splash_write_proc+0x430/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 3 changed to on
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

Badness in set_origin at drivers/char/vt.c:573
Call Trace:
[<c02da3b5>] set_origin+0xb0/0xb5
[<c02dab21>] vc_resize+0x2c6/0x4f7
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

bootsplash 3.1.3-2003/11/14: looking for picture....Badness in vc_allocate at drivers/char/vt.c:680
Call Trace:
[<c02da856>] vc_allocate+0x1a4/0x1a9
[<c031b46a>] splash_getraw+0x890/0x895
[<c015fb92>] link_path_walk+0x612/0x908
[<c015f05c>] permission+0x2f/0x4b
[<c01531b0>] get_empty_filp+0x68/0xd4
[<c031bfcd>] splash_write_proc+0x430/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 4 changed to on
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

Badness in set_origin at drivers/char/vt.c:573
Call Trace:
[<c02da3b5>] set_origin+0xb0/0xb5
[<c02dab21>] vc_resize+0x2c6/0x4f7
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

bootsplash 3.1.3-2003/11/14: looking for picture....Badness in vc_allocate at drivers/char/vt.c:680
Call Trace:
[<c02da856>] vc_allocate+0x1a4/0x1a9
[<c031b46a>] splash_getraw+0x890/0x895
[<c015fb92>] link_path_walk+0x612/0x908
[<c015f05c>] permission+0x2f/0x4b
[<c01531b0>] get_empty_filp+0x68/0xd4
[<c031bfcd>] splash_write_proc+0x430/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 5 changed to on
Badness in vc_resize at drivers/char/vt.c:748
Call Trace:
[<c02dad4d>] vc_resize+0x4f2/0x4f7
[<c02d9be5>] update_attr+0xc8/0xdc
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

Badness in set_origin at drivers/char/vt.c:573
Call Trace:
[<c02da3b5>] set_origin+0xb0/0xb5
[<c02dab21>] vc_resize+0x2c6/0x4f7
[<c031ba51>] splash_status+0xee/0x162
[<c031bd0e>] splash_write_proc+0x171/0x445
[<c0180e51>] proc_file_write+0x0/0x42
[<c0180e88>] proc_file_write+0x37/0x42
[<c01525a0>] vfs_write+0xb0/0x119
[<c01526ae>] sys_write+0x42/0x63
[<c03f6da6>] sysenter_past_esp+0x43/0x65

I think its related to the bootsplash thingy, error that everyone else was getting..

Bye,
Jassi
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Mon Jan 12, 2004 9:13 pm    Post subject: Reply with quote

Apply this and those should go away.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
Jazz
Guru
Guru


Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia

PostPosted: Mon Jan 12, 2004 9:18 pm    Post subject: Reply with quote

Thanks.. i applied the patch, emm, do i need to just rebot after that, (just to see whether it worked) or should i recompiel the kernel again :?:

Bye,
Jassi
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Mon Jan 12, 2004 9:22 pm    Post subject: Reply with quote

You need to recompile and reboot before it will take effect.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
didl
Retired Dev
Retired Dev


Joined: 09 Sep 2003
Posts: 1106
Location: Pittsburgh, PA

PostPosted: Mon Jan 12, 2004 11:18 pm    Post subject: Reply with quote

ed0n wrote:
First of all OneofOne thanks , the sources are great.

Second of all ;) I have a question for you.
Can anyone tell me why when I am trying to rmmod a module its segfaulting
It is segfaulting with 2.6.1-love1/2/3 and with module-init-tools-0.9.15_pre4/
module-init-tools-3.0_pre5.

Edon


I have the same problem, insmod/modprobe .... all segfault. I tried and this is a problem with mm1 and mm2. Any suggestions as to how to fix it would be appreciated (and yes, I do have module loading/unloading support in the kernel)
Back to top
View user's profile Send private message
m3ph
n00b
n00b


Joined: 09 Jan 2004
Posts: 39
Location: Estonia

PostPosted: Mon Jan 12, 2004 11:20 pm    Post subject: pcmcia-cs Reply with quote

does pcmcia-cs compile with this one?
Back to top
View user's profile Send private message
Jazz
Guru
Guru


Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia

PostPosted: Mon Jan 12, 2004 11:28 pm    Post subject: Reply with quote

Hey just a suggestion.. wud the following patches be good enough to get implemented in the love sources ??
Internet Speedy Patch

Bye,
Jassi
Back to top
View user's profile Send private message
neenee
Veteran
Veteran


Joined: 20 Jul 2003
Posts: 1786

PostPosted: Mon Jan 12, 2004 11:34 pm    Post subject: Reply with quote

i use wondershaper for this. though
i do not see which patch it would be;
this is just a script which uses traffic
shaping parts of the kernel / modules.
_________________
proud to be a scout and a chronic penguin hugger
Legion of Lore - site
Back to top
View user's profile Send private message
supernova
n00b
n00b


Joined: 12 Jan 2004
Posts: 49
Location: Karlsruhe, Germany

PostPosted: Mon Jan 12, 2004 11:40 pm    Post subject: Reply with quote

Hi!

Thanks for the sources, they seem to run great! :D
A small problem, though: When I'm booting, the first two messages I get are:
Code:
cdrom : : unknown mrw mode page
cdrom : : unknown mrw mode page

As I said, everything is running smooth, including my DVD-ROM and DVD-RW drives, so it doesn't seem to be an error message.
However, it's a bit annoying, any idea how I can get rid of it?

I got the messages in love2 and I'm still getting them in love3.
The gentoo-dev-sources 2.6.1 worked fine, though (I copied my .config from there and I merely added Supermount and Reiser4-support)

Thx in advance for your support! :)
Back to top
View user's profile Send private message
Jazz
Guru
Guru


Joined: 16 Nov 2003
Posts: 543
Location: Melbourne, Australia

PostPosted: Mon Jan 12, 2004 11:45 pm    Post subject: Reply with quote

Hmm.. is the mrw gotto do anything with the Mount Rainer Format ?? cud it be accociated to the UDF packet writing enabled in the kernel ??

Just a passing thought..

@neene, well i dunno anything about it myself, just stumbled upon it and thought it might be an interesting thing to be added to the Love...

Cud u please elaborate on how you achieve the traffic control with the app that u use, and whether it has a gui ?

Bye,
Jassi
Back to top
View user's profile Send private message
antisthenes
Tux's lil' helper
Tux's lil' helper


Joined: 06 May 2003
Posts: 89

PostPosted: Mon Jan 12, 2004 11:46 pm    Post subject: Reply with quote

Does anyone know if loop devices work on this one? I'm forced to use a random thing I got off loop-aes.sf.net to do it, because otherwise I get ioctl errors. Someone know?
Back to top
View user's profile Send private message
supernova
n00b
n00b


Joined: 12 Jan 2004
Posts: 49
Location: Karlsruhe, Germany

PostPosted: Mon Jan 12, 2004 11:57 pm    Post subject: Reply with quote

Hello Jassi,

I had UDF support enabled, I removed it and recompiled, but the messages still appear. :(
As far as I can tell from my Google researches, "mrw" does indeed stand for Mt Rainier... (?)

Here is a part of my .config:
Code:
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_FS_SYSCALL is not set
CONFIG_REISER4_LARGE_KEY=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISER4_USE_EFLUSH=y
# CONFIG_REISER4_COPY_ON_CAPTURE is not set
# CONFIG_REISER4_BADBLOCKS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
                                                                                                 
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set


Thanks!
Back to top
View user's profile Send private message
neenee
Veteran
Veteran


Joined: 20 Jul 2003
Posts: 1786

PostPosted: Tue Jan 13, 2004 12:01 am    Post subject: Reply with quote

jassi wrote:

Cud u please elaborate on how you achieve
the traffic control with the app that u use, and
whether it has a gui ?


wondershaper is a mere script, which uses traffic
shaping as described in the document you linked
to, to achieve a setup where downloads do not
affect uploads as much, and vice versa, as well
as keeping interactivity when using most of your
up or downstream.

because it is a script, it has no gui.

i use it to browse the net or chat in irc without
too much lag, while uploading and downloading.

also, using wondershaper on this system, makes
sure that other systems on the network can still
browse the net while i am busy; the other users
are not as demanding, but can complain when
they are unable to browse their sites.
_________________
proud to be a scout and a chronic penguin hugger
Legion of Lore - site
Back to top
View user's profile Send private message
dedeaux
Apprentice
Apprentice


Joined: 19 Jun 2002
Posts: 183
Location: Nairobi, Kenya

PostPosted: Tue Jan 13, 2004 12:37 am    Post subject: compiled and working fine Reply with quote

I was able to successfully compile this and am currently running on it with no issues.

I moved from 2.6.0-love2 to this one. I am running it on a Korean laptop with no issues.

Thanks for the hard work.
Back to top
View user's profile Send private message
PrakashP
Veteran
Veteran


Joined: 27 Oct 2003
Posts: 1249
Location: C.C.A.A., Germania

PostPosted: Tue Jan 13, 2004 1:06 am    Post subject: Reply with quote

@Wedge_

As 2.6.1-love1 started locking up I am giving love3 a try... And yes, your patch for kexec (or rather clean desintegration) works nicely when I don't enable kexec. For the meanwhile I disabled APIC and enabled CPU disconnect. I just want to see whether the lock are APIC related...
Back to top
View user's profile Send private message
watersb
Apprentice
Apprentice


Joined: 04 Sep 2002
Posts: 297
Location: where the hell is Tesuque, New Mexico?

PostPosted: Tue Jan 13, 2004 2:07 am    Post subject: Reply with quote

antisthenes wrote:
Does anyone know if loop devices work on this one? I'm forced to use a random thing I got off loop-aes.sf.net to do it, because otherwise I get ioctl errors. Someone know?


Try wading through this:
https://forums.gentoo.org/viewtopic.php?t=108162

or this (older)
http://www.sdc.org/~leila/usb-dongle/

The readme.html file there has pointers to some relevant Gentoo forums.
Back to top
View user's profile Send private message
antisthenes
Tux's lil' helper
Tux's lil' helper


Joined: 06 May 2003
Posts: 89

PostPosted: Tue Jan 13, 2004 2:11 am    Post subject: Reply with quote

I know how to use loop-devices. I already use the loop-AES fix, but I don't need AES or any sort of encryption. All I want is my loopback devices, and without the loop-AES module replacing the normal one, I get something like:
Code:
ioctl: LOOP_SET_FD: Invalid argument

(can't remember the exact error).

I want the loop devices to work out of the box, and that's what I was asking.

Thanks, though.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Page 2 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum