View previous topic :: View next topic |
Author |
Message |
AdamG n00b
Joined: 17 Apr 2002 Posts: 46 Location: USA, MA
|
Posted: Thu Aug 15, 2002 7:15 pm Post subject: Intel® PRO/100 VE LAN chip - what module |
|
|
Does anyone know what module i would need to load for this nic..Intel® PRO/100 VE LAN chip (its onboard)
It is from this board.. http://www.giga-byte.com/products/8iexp.htm
Also, does anyone know what i would have to load i nthe kernel for the creative sound card? ive heard the ac97 dri will work...
thanks for the help |
|
Back to top |
|
|
peuzz n00b
Joined: 08 Jul 2002 Posts: 9
|
Posted: Thu Aug 15, 2002 8:42 pm Post subject: |
|
|
try 'eepro100' for the network card an 'emu10k1' for the creative snd card |
|
Back to top |
|
|
AdamG n00b
Joined: 17 Apr 2002 Posts: 46 Location: USA, MA
|
Posted: Fri Aug 16, 2002 12:07 am Post subject: |
|
|
eepro100 worked during the install, but after install, if i 'modprobe eepro100'
it says insmod failed..
said it could be due to improper irq or io....
*shrug*
any ideas?
|
|
Back to top |
|
|
delta407 Bodhisattva
Joined: 23 Apr 2002 Posts: 2876 Location: Chicago, IL
|
Posted: Fri Aug 16, 2002 3:15 am Post subject: |
|
|
What's the exact message? _________________ I don't believe in witty sigs. |
|
Back to top |
|
|
vtaoe n00b
Joined: 16 Aug 2002 Posts: 25 Location: Pensacola, FL, US
|
Posted: Fri Aug 16, 2002 2:51 pm Post subject: Intel® PRO/100 VE LAN chip - try Intel's e100 driver |
|
|
Adam,
AdamG wrote: | eepro100 worked during the install, but after install, if i 'modprobe eepro100' it says insmod failed.. |
I've got an Intel i845 board which also has the VE networking on-board. I have not yet configured it post-install in Gentoo (still building...), but I have had good results with Intel's e100 driver (not the Linux eepro100) while using Linux From Scratch on the same machine.
It's available on Intel's website at:
Good luck, and let us know if it works! BTW, it's a binary-only, module-only driver. Also, every time you run a make clean in your kernel source tree, you'll have to remember to re-install the module by running make install in the e100-2.1.6/src directory.
Chris
Last edited by vtaoe on Mon Aug 19, 2002 8:05 am; edited 2 times in total |
|
Back to top |
|
|
AdamG n00b
Joined: 17 Apr 2002 Posts: 46 Location: USA, MA
|
Posted: Fri Aug 16, 2002 6:48 pm Post subject: Re: Intel® PRO/100 VE LAN chip - try Intel's e100 driver |
|
|
vtaoe wrote: | Good luck, and let us know if it works! |
Thanks needed it
Worked like a charm...
now i just gotta figure out the sound |
|
Back to top |
|
|
vtaoe n00b
Joined: 16 Aug 2002 Posts: 25 Location: Pensacola, FL, US
|
Posted: Sat Aug 17, 2002 6:48 am Post subject: Re: Intel® PRO/100 VE LAN chip - try Intel's e100 driver |
|
|
Adam,
AdamG wrote: | Thanks needed it
Worked like a charm... |
Glad to help. I beat my head against that problem off and on for a couple of weeks after I got my mobo. I went so far as to install my old network card just so I could move on to some other things while thinking about the on-board LAN. Intel certainly doesn't make it easy to find useful things amongst the pile of marketing crap on their website...
Interestingly enough, I finished my Gentoo base system compile today and the stock Linux eepro100 driver worked fine for me, so I didn't have to use the Intel e100 driver with Gentoo. Go figure... I wonder if perhaps my LFS kernel compile and your Gentoo kernel compile used the same incorrect combination of settings which broke eepro100 in the kernel itself? Whatever mistake I made, I guess I picked the right options this time!
FWIW, the only options I currently have enabled under Network device support are EtherExpressPro/100 support, and of course Ethernet (10 or 100Mbit) and EISA, VLB, PCI and on board controllers to get to it, as well as Dummy net driver support.
Anyway, glad e100 worked for you!
Chris |
|
Back to top |
|
|
AdamG n00b
Joined: 17 Apr 2002 Posts: 46 Location: USA, MA
|
Posted: Sat Aug 17, 2002 12:56 pm Post subject: |
|
|
yeah..got the sound working
es1371 |
|
Back to top |
|
|
|