| View previous topic :: View next topic |
| Author |
Message |
btd425
n00b
Joined: 15 May 2025
Posts: 2
|
 Posted: Thu May 15, 2025 6:08 pm Post subject: Wifi drivers reloading only during emerge. |
 |
|
So yesterday i built a hardened musl system on this on this same machine this was not a problem i could emerge fine, i went back and built a normal glibc desktop system now only during emerges my wifi firmware reloads constantly failing in emerges, i had woke up yesterday after u[/code]pdating the world set and ifconfig said i had wlan124. I really need some help as i have no idea why this is happening, here is the output of demsg.
[code]
[ 465.049678] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 465.174883] usb 2-1: reset SuperSpeed USB device number 12 using xhci_hcd
[ 465.319726] Loading firmware: mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
[ 465.320579] mt7921u 2-1:1.0: HW/SW Version: 0x8a108a10, Build Time: 20241106151007a
[ 465.330166] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 465.336711] mt7921u 2-1:1.0: WM Firmware Version: ____010000, Build Time: 20241106151045
[ 466.926507] mt7921u 2-1:1.0 wlp0s20u1: renamed from wlan0
--
[ 485.243047] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 485.364830] usb 2-1: reset SuperSpeed USB device number 13 using xhci_hcd
[ 485.513474] Loading firmware: mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
[ 485.513861] mt7921u 2-1:1.0: HW/SW Version: 0x8a108a10, Build Time: 20241106151007a
[ 485.523407] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 485.526236] mt7921u 2-1:1.0: WM Firmware Version: ____010000, Build Time: 20241106151045
[ 487.143634] mt7921u 2-1:1.0 wlp0s20u1: renamed from wlan0
--
[ 609.418225] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 609.544563] usb 2-1: reset SuperSpeed USB device number 14 using xhci_hcd
[ 609.586858] Loading firmware: mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
[ 609.587727] mt7921u 2-1:1.0: HW/SW Version: 0x8a108a10, Build Time: 20241106151007a
[ 609.843572] Loading firmware: mediatek/WIFI_RAM_CODE_MT7961_1.bin
[ 609.850143] mt7921u 2-1:1.0: WM Firmware Version: ____010000, Build Time: 20241106151045
[ 611.438948] mt7921u 2-1:1.0 wlp0s20u1: renamed from wlan0 |
|
| Back to top |
|
 |
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 2215
|
| Posted: Thu May 15, 2025 6:12 pm Post subject: |
|
|
| You should focus on why the USB hub is resetting the device |
|
| Back to top |
|
|
btd425
n00b
Joined: 15 May 2025
Posts: 2
|
| Posted: Thu May 15, 2025 6:17 pm Post subject: |
|
|
| grknight wrote: | | You should focus on why the USB hub is resetting the device |
But why does this only happen when im using portage could it be because i have portage niceness is set to -1 i will test with 0 niceness. |
|
| Back to top |
|
|
|
Networking & Security
