| View previous topic :: View next topic |
| Author |
Message |
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
 Posted: Tue Apr 11, 2023 1:56 pm Post subject: setup gvm / openvas scanner |
 |
|
While setting up openvas/gvm I successfully emerged it and setup and started redis and postgres according to description in the wiki. I then let it perform its initial update by issuing gvm-sync-all which took a while, and following I created certs by gvm-manage-certs -a as described per wiki.
Nextsteop (which should take a while too) is to start ospd-openvas, but this one fails and I see the following error in /var/log/messages:
| Code: | Apr 11 13:43:39 HOSTNAME OSPD[13410]: ERROR: (ospd_openvas.db) Redis Error: Not possible to connect to the kb.
Apr 11 13:43:39 HOSTNAME /etc/init.d/ospd-openvas[13409]: start-stop-daemon: failed to start `/usr/bin/ospd-openvas'
Apr 11 13:43:39 HOSTNAME /etc/init.d/ospd-openvas[13389]: ERROR: ospd-openvas failed to start |
What did I miss? What info can I provide to assist in finding the solution?
Seeing in redis.log:
| Code: | 2101:M 11 Apr 2023 17:46:12.453 # You requested maxclients of 10000 requiring at least 10032 max file descriptors.
2101:M 11 Apr 2023 17:46:12.453 # Server can't set maximum open files to 10032 because of OS error: Operation not permitted.
2101:M 11 Apr 2023 17:46:12.453 # Current maximum open files is 4096. maxclients has been reduced to 4064 to compensate for low ulimit. If you need higher maxclients increase 'ulimit -n'. |
Last edited by Elleni on Mon May 08, 2023 8:30 am; edited 3 times in total |
|
| Back to top |
|
 |
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Thu Apr 13, 2023 11:51 am Post subject: |
|
|
Any additional info that I can provide in order to find out how to fix this?
In the meantime I found the solution to increase openfiles so redis does not complain anymore.
Reading carfefully the setup instructions on the wiki once again, I came across of this: | Code: | | Note that this configuration will only allow the 'redis' user to access the socket. We will later fix that by setting a filesystem ACL on the socket, allowing the 'gvm' user, i.e., the user OpenVAS runs under, to access it. |
But no info on howto sett a filesystem ACL later. I tried adding gvm user to redis group (gpasswd -a gvm redis) but that did not help either.
Also tried to add the following in rc.conf but that did not work either:
| Code: | redis_user="root"
ospd_openvas_user="root" |
| Code: | Apr 13 16:22:47 HOSTNAME OSPD[2130]: ERROR: (ospd_openvas.db) Redis Error: Not possible to connect to the kb.
Apr 13 16:22:47 HOSTNAME /etc/init.d/ospd-openvas[2129]: start-stop-daemon: failed to start `/usr/bin/ospd-openvas'
Apr 13 16:22:47 HOSTNAME /etc/init.d/ospd-openvas[2108]: ERROR: ospd-openvas failed to start
|
Neither did adding those lines in the corresponding /etc/conf.d/ files work.
openvas -s
| Code: | cgi_path = /cgi-bin:/scripts
checks_read_timeout = 5
nasl_no_signature_check = yes
max_checks = 10
time_between_request = 0
safe_checks = yes
optimize_test = yes
allow_simultaneous_ips = yes
unscanned_closed = yes
debug_tls = 0
test_empty_vhost = no
open_sock_max_attempts = 5
plugins_timeout = 320
scanner_plugins_timeout = 36000
timeout_retry = 3
vendor_version =
plugins_folder = /var/lib/openvas/plugins
config_file = /etc/openvas/openvas.conf
max_hosts = 30
db_address = /tmp/redis.sock
report_host_details = yes
expand_vhosts = yes
log_plugins_name_at_load = no
log_whole_attack = no
include_folders = /var/lib/openvas/plugins
auto_enable_dependencies = yes
drop_privileges = no
test_alive_hosts_only = yes
unscanned_closed_udp = yes
non_simult_ports = 139, 445, 3389, Services/irc
|
emerge --info:
| Code: | Portage 3.0.44 (python 3.10.10-final-0, default/linux/amd64/17.1, gcc-12, glibc-2.36-r7, 6.1.19-gentoo x86_64)
=================================================================
System uname: Linux-6.1.19-gentoo-x86_64-Intel-R-_Core-TM-_i5-6500_CPU_@_3.20GHz-with-glibc2.36
KiB Mem: 6080444 total, 5743664 free
KiB Swap: 10341368 total, 10341368 free
Timestamp of repository gentoo: Wed, 12 Apr 2023 07:00:01 +0000
Head commit of repository gentoo: f5e0ac5711c94279073106adf04977cb07db37c7
sh bash 5.1_p16-r2
ld GNU ld (Gentoo 2.39 p5) 2.39.0
app-misc/pax-utils: 1.3.5::gentoo
app-shells/bash: 5.1_p16-r2::gentoo
dev-lang/perl: 5.36.0-r2::gentoo
dev-lang/python: 3.10.10_p3::gentoo, 3.11.2_p2::gentoo
dev-lang/rust: 1.66.1::gentoo
dev-util/cmake: 3.25.3::gentoo
dev-util/meson: 1.0.1::gentoo
sys-apps/baselayout: 2.13-r1::gentoo
sys-apps/openrc: 0.46::gentoo
sys-apps/sandbox: 2.29::gentoo
sys-devel/autoconf: 2.71-r5::gentoo
sys-devel/automake: 1.16.5::gentoo
sys-devel/binutils: 2.39-r4::gentoo
sys-devel/binutils-config: 5.5::gentoo
sys-devel/gcc: 12.2.1_p20230121-r1::gentoo
sys-devel/gcc-config: 2.10::gentoo
sys-devel/libtool: 2.4.7-r1::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 6.1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.36-r7::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
volatile: True
sync-rsync-verify-jobs: 1
sync-rsync-verify-max-age: 24
sync-rsync-extra-opts:
sync-rsync-verify-metamanifest: yes
local
location: /var/db/repos/local
masters: gentoo
volatile: True
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS="-march=native -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs binpkg-multi-instance buildpkg-live candy config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=native -O2 -pipe"
GENTOO_MIRRORS="https://mirror.init7.net/gentoo/ http://mirror.init7.net/gentoo/ rsync://mirror.init7.net/gentoo/"
LANG="de_CH.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LEX="flex"
LINGUAS="de de_CH"
MAKEOPTS="-j2"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="acl ads amd64 bzip2 cli crypt dri fortran gdbm iconv ipv6 kerberos ldap libglvnd libtirpc multilib ncurses nls nptl openmp pam pcre readline seccomp split-usr ssl syslog test-rust unicode winbind xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2021" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="pc" INPUT_DEVICES="libinput" KERNEL="linux" L10N="de de_CH" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-4 php8-0" POSTGRES_TARGETS="postgres12 postgres13" PYTHON_SINGLE_TARGET="python3_10" PYTHON_TARGETS="python3_10" RUBY_TARGETS="ruby30" USERLAND="GNU" VIDEO_CARDS="vmware" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EMERGE_DEFAULT_OPTS, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LFLAGS, LIBTOOL, MAKE, MAKEFLAGS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS |
|
|
| Back to top |
|
|
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Thu Apr 13, 2023 3:24 pm Post subject: |
|
|
| Found the prob. In /etc/openvas/openvas.conf the path for the redis socket is set to /tmp/redis.sock. Correctiog this to /run/redis/redis.sock lets the mentioned service start successfully, so I close the thread and open a new one if needed. |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21631
|
| Posted: Thu Apr 13, 2023 4:46 pm Post subject: |
|
|
| /run/redis/redis.sock seems like a more reasonable path. The path in the openvas configuration ought to default to that. This may require a change to the Gentoo documentation or to the package, depending on where the path in /etc/openvas/openvas.conf originates now. |
|
| Back to top |
|
|
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Thu Apr 13, 2023 10:21 pm Post subject: |
|
|
| True, should I open a bug for that? I am still in the process of setting gvm up so I'll see if everything runs smoothly or else I'll be back and make a new thread. |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21631
|
| Posted: Thu Apr 13, 2023 11:09 pm Post subject: |
|
|
| I was vague on whether to open a bug because it is not clear to me why your configuration file specified /tmp/redis.sock. If it is that way because Gentoo set it that way, then yes, open a Gentoo bug report. If it is that way because upstream set it that way, then we need to know where the upstream Redis configuration binds that socket, in order to determine whether we should ask gvm upstream to change the default configuration. If it is that way because you followed a Wiki page that told you to put it there, then the Wiki page needs to be edited. |
|
| Back to top |
|
|
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Fri Apr 14, 2023 6:19 am Post subject: |
|
|
Thanks for clarification. I will import a snapshot before I started and check and act accordingly but it will take some time.  |
|
| Back to top |
|
|
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Thu Apr 27, 2023 2:07 pm Post subject: |
|
|
I restarted from scratch. Following my findings and errors in the hope, somebody can help.
/etc/openvas/openvas.conf pointing to /tmp/redis.sock for the database. Changed to /run/redis/redis.sock -> I dont have an account to modify the wiki. Who should I contatc in case the wiki needs to be changed? Or should I report all these findings in a new bug?
I read the following in the wiki and dont know if something needs to be adjusted:
| Quote: | | Note that this configuration will only allow the 'redis' user to access the socket. We will later fix that by setting a filesystem ACL on the socket, allowing the 'gvm' user, i.e., the user OpenVAS runs under, to access it. |
Adding user to redisgroup or start redis and ospd_openvas with root by editing rc.conf didnt work either.
After syncing ospd-openvas service starts successfully but
ps aux | grep openvassd is supposed to show:
| Quote: | openvassd: Waiting for incoming connections
openvassd: Serving /var/run/openvassd.sock |
Which it doesn't.
openvassd.sock dos not exist on my system.
Service gvmd service crashes when trying to start it.
See gvmd.log: https://bpa.st/WTNVS although postgresql setup has been done according to the wiki page.
ls -l /run/postgresql/.s.PGSQL.5432
| Code: | | srwxrwxrwx 1 postgres postgres 0 27. Apr 15:58 /run/postgresql/.s.PGSQL.5432 |
I checked if adding gvm user to postgres group would help, which was not the case.
openvas -s showing:
| Code: |
cgi_path = /cgi-bin:/scripts
checks_read_timeout = 5
nasl_no_signature_check = yes
max_checks = 10
time_between_request = 0
safe_checks = yes
optimize_test = yes
allow_simultaneous_ips = yes
unscanned_closed = yes
debug_tls = 0
test_empty_vhost = no
open_sock_max_attempts = 5
plugins_timeout = 320
scanner_plugins_timeout = 36000
timeout_retry = 3
vendor_version =
plugins_folder = /var/lib/openvas/plugins
config_file = /etc/openvas/openvas.conf
max_hosts = 30
db_address = /run/redis/redis.sock
report_host_details = yes
expand_vhosts = yes
log_plugins_name_at_load = no
log_whole_attack = no
include_folders = /var/lib/openvas/plugins
auto_enable_dependencies = yes
drop_privileges = no
test_alive_hosts_only = yes
unscanned_closed_udp = yes
non_simult_ports = 139, 445, 3389, Services/irc
|
emerge --info: | Code: |
Portage 3.0.44 (python 3.10.10-final-0, default/linux/amd64/17.1, gcc-12, glibc-2.36-r7, 6.1.19-gentoo x86_64)
=================================================================
System uname: Linux-6.1.19-gentoo-x86_64-Common_KVM_processor-with-glibc2.36
KiB Mem: 32876824 total, 29635808 free
KiB Swap: 16777208 total, 16777208 free
Timestamp of repository gentoo: Thu, 27 Apr 2023 11:30:01 +0000
Head commit of repository gentoo: 67b3c82c7943e73f410e089797e4c961bace64a8
sh bash 5.1_p16-r2
ld GNU ld (Gentoo 2.39 p6) 2.39.0
app-misc/pax-utils: 1.3.5::gentoo
app-shells/bash: 5.1_p16-r2::gentoo
dev-lang/perl: 5.36.0-r2::gentoo
dev-lang/python: 3.10.10_p3::gentoo, 3.11.2_p2::gentoo
dev-lang/rust: 1.66.1::gentoo
dev-util/cmake: 3.25.3::gentoo
dev-util/meson: 1.0.1::gentoo
sys-apps/baselayout: 2.13-r1::gentoo
sys-apps/openrc: 0.46::gentoo
sys-apps/sandbox: 2.29::gentoo
sys-devel/autoconf: 2.71-r5::gentoo
sys-devel/automake: 1.16.5::gentoo
sys-devel/binutils: 2.39-r5::gentoo
sys-devel/binutils-config: 5.5::gentoo
sys-devel/gcc: 12.2.1_p20230304::gentoo
sys-devel/gcc-config: 2.10::gentoo
sys-devel/libtool: 2.4.7-r1::gentoo
sys-devel/make: 4.4.1::gentoo
sys-kernel/linux-headers: 6.1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.36-r7::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
volatile: True
sync-rsync-verify-max-age: 24
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
local
location: /var/db/repos/local
masters: gentoo
volatile: True
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS=""
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS=""
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs binpkg-multi-instance buildpkg-live candy config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS=""
GENTOO_MIRRORS="https://mirror.init7.net/gentoo/ http://mirror.init7.net/gentoo/ rsync://mirror.init7.net/gentoo/"
LANG="de_CH.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LEX="flex"
LINGUAS="de de_CH"
MAKEOPTS="-j12"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="acl ads amd64 bzip2 cli crypt dri fortran gdbm iconv ipv6 kerberos ldap libglvnd libtirpc multilib ncurses nls nptl openmp pam pcre radius readline seccomp snmp split-usr ssl syslog test-rust unicode winbind xattr zlib" ABI_X86="64" ADA_TARGET="gnat_2021" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 sse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="pc" INPUT_DEVICES="libinput" KERNEL="linux" L10N="de de_CH" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-4 php8-0" POSTGRES_TARGETS="postgres12 postgres13" PYTHON_SINGLE_TARGET="python3_10" PYTHON_TARGETS="python3_10" RUBY_TARGETS="ruby30" USERLAND="GNU" VIDEO_CARDS="vmware" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EMERGE_DEFAULT_OPTS, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LFLAGS, LIBTOOL, MAKE, MAKEFLAGS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS |
Should I file a bug because of the path of the redis.sock file in the tmp directory? Another (minor) error in the wiki, I have spotted is, that it states to modify redis.conf which according to wiki should be /etc/redis.conf but I see it exists in /etc/redis/redis.conf
What should I do next? Delete postgresql db and redo the mentioned steps? And if so - how?
Last but not least - is the redis openfiles error described above relevant and should be reported too, as I dont see anything related on the wiki either.
Thanks in advance for your support. |
|
| Back to top |
|
|
Elleni
Veteran
Joined: 23 May 2006
Posts: 1270
|
| Posted: Mon May 08, 2023 8:31 am Post subject: |
|
|
| *bump* in the hope someone using this thing has an idea and could give me some help |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
