View previous topic :: View next topic |
Author |
Message |
cl0q n00b
Joined: 04 Aug 2022 Posts: 43
|
Posted: Fri Aug 05, 2022 8:22 pm Post subject: Xorg doesnt find screens. |
|
|
Hi, i am back again with yet another issue, that being that running startx returns "no screens found".
I am running on a GT1030 with nouveau drivers and stated that in my make.conf and xorg.conf. I tried to fix my error with the other topics about this issue on this forum, but with no success.
make.conf:
Code: | # These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
COMMON_FLAGS="-march=native -O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
MAKEOPTS="-j8"
USE="X symlink perl"
ACCEPT_LICENSE="*"
ACCEPT_KEYWORDS="~amd64"
INPUT_DEVICES="libinput synaptics keyboard mouse evdev vmmouse void"
VIDEO_CARDS="nouveau"
CONFIG_PROTECT="/etc/portage"
# NOTE: This stage was built with the bindist Use flag enabled
PORTDIR="/var/db/repos/gentoo"
DISTDIR="/var/cache/distfiles"
PKGDIR="/var/cache/binpkgs"
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C
GENTOO_MIRRORS="https://ftp.fau.de/gentoo http://ftp.fau.de/gentoo ftp://ftp.fau.de/gentoo rsync://ftp.fau.de/gentoo https://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ http://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ rsync://ftp-stud.hs-esslingen.de/gentoo/"
GRUB_PLATFORMS="efi-64"
|
xorg.conf
Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "WrappedFB" # [<bool>]
#Option "GLXVBlank" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "PageFlip" # [<bool>]
#Option "SwapLimit" # <i>
#Option "AsyncUTSDFS" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # <i>
Identifier "Card0"
Driver "nouveau"
BusID "PCI:38:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
Thanks in advance! |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54212 Location: 56N 3W
|
Posted: Fri Aug 05, 2022 9:40 pm Post subject: |
|
|
cl0q,
As you want to use the nouveau driver, no xorg.conf should be required.
The auto detection should just work. Rename it, so that Xorg does not find it.
Test it now.
Then pastebin your dmesg and Xorg.0.log file.
wgetpaste puts files and command output onto a pastebin site. You tell us the links. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
cl0q n00b
Joined: 04 Aug 2022 Posts: 43
|
Posted: Fri Aug 05, 2022 9:53 pm Post subject: |
|
|
NeddySeagoon,
so what i now did was rename the xorg.conf to xorg.conf.old in /etc/X11/ and run startx again, to no avail.
this is Xorg.0.log in /var/log/: http://dpaste.com/6AVKAVN94
this is dmesg: http://dpaste.com/8ZMW9GHY8 |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54212 Location: 56N 3W
|
Posted: Fri Aug 05, 2022 10:29 pm Post subject: |
|
|
cl0q,
It found Code: | [ 462.322] (++) Using config file: "/root/xorg.conf.new" | which will be the original file you copied to xorg.conf.
Remove that and try again.
Code: | [ 0.333049] nouveau 0000:26:00.0: NVIDIA GP108 (138000a1)
[ 0.449574] nouveau 0000:26:00.0: bios: version 86.08.17.00.5e
[ 0.449629] Loading firmware: nvidia/gp108/nvdec/scrubber.bin
[ 0.449645] Loading firmware: nvidia/gp108/acr/bl.bin
[ 0.449650] nouveau 0000:26:00.0: acr: firmware unavailable
[ 0.449653] nouveau 0000:26:00.0: pmu: firmware unavailable
[ 0.449685] nouveau 0000:26:00.0: gr: firmware unavailable
[ 0.449691] nouveau 0000:26:00.0: sec2 ctor failed: -38
[ 0.449695] nouveau: probe of 0000:26:00.0 failed with error -38 |
Your kernel is missing firmware.
Your console should be using nouveaudrmfb fot the console but its not because of the missing firmware.
The easy fix for that is to build nouveau as a loadable module in your kernel.
Fix your kernel, hide or remove /root/xorg.conf.new and try again.
When you reboot into your new kernel, look at the date/time in
That's the build date/time of the running kernel. Does it look like your most recent kernel build? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
cl0q n00b
Joined: 04 Aug 2022 Posts: 43
|
Posted: Mon Aug 08, 2022 4:33 pm Post subject: |
|
|
NeddySeagoon,
sorry for getting back this late, your solution worked and I have been busy trying to set it up further |
|
Back to top |
|
|
|