| View previous topic :: View next topic |
| Author |
Message |
chrootman
Tux's lil' helper
Joined: 18 Aug 2020
Posts: 95
|
 Posted: Tue Aug 18, 2020 4:14 am Post subject: ATI 6570 TURKS[KMS][legacy fbdev][modesetting on radeon] |
 |
|
Hola, tengo funcionando gentoo en una máquina antigua con systemd y genkernel-next, con una ati me daba problemas con xorg, pero el wiki de gentoo dice que hay que activar en el kernel:
| Code: | Device Drivers --->
Graphics support --->
<*/M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*/M> ATI Radeon
[*] Enable modesetting on radeon by default
-*- Support for frame buffer devices --->
< > ATI Radeon display support |
<-Ese [*] Enable modesetting on radeon by default NO LO TENGO!!!
| Code: | Device Drivers ---> │ │
Graphics support --->
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
│ --- Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) │ │
│ │ [ ] DRM DP AUX Interface
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
│ │ [*] Enable legacy fbdev support for your modesetting driver
<-Esta es lo que tengo en su lugar "legacy fbdev", NO radeon by default.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
<*> ATI Radeon
<-Si activo está me aparece CONFIG_DRM_RADEON=y, pero no KMS. │ │
│ │ [ ] Always enable userptr support (NEW)
│ │ Frame buffer Devices ---> │ │ │ │ < > ATI Radeon display support │ │
|
Si selecciono <*> ATI Radeon
aparece
CONFIG_DRM_RADEON=y
| Code: | CONFIG_DRM_KMS_HELPER=y
│ Symbol: DRM_KMS_HELPER [=y]
│ Type : tristate
│ Defined at drivers/gpu/drm/Kconfig:73
│ Depends on: HAS_IOMEM [=y] && DRM [=y]
│ Selected by [y]:
│ - DRM_FBDEV_EMULATION [=y] && HAS_IOMEM [=y] && DRM [=y]
│ - DRM_RADEON [=y] && HAS_IOMEM [=y] && DRM [=y] && PCI [=y] && MMU [=y]
│ - DRM_AMDGPU [=y] && HAS_IOMEM [=y] && DRM [=y] && PCI [=y] && MMU [=y]
------------------------------------------------------------------------------------
CONFIG_DRM_RADEON=y
Symbol: DRM_RADEON [=y]
│ Type : tristate
│ Prompt: ATI Radeon
│ Location:
│ -> Device Drivers
│ (1) -> Graphics support
│ Defined at drivers/gpu/drm/Kconfig:206
│ Depends on: HAS_IOMEM [=y] && DRM [=y] && PCI [=y] && MMU [=y]
│ Selects: FW_LOADER [=y] && DRM_KMS_HELPER [=y] && DRM_TTM [=m] && POWER_SUPPLY
[=y] && HWMON [=y] && BACKLIGHT_CLASS_DEVICE [=y] && │
CONFIG_DRM_RADEON_KMS=y
│ No matches found.
|
<-Como comentaba arriba el kernel no da ni una opción para KMS
| Code: | # CONFIG_FB_RADEON is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
Symbol: FRAMEBUFFER_CONSOLE [=y]
│
│ Type : bool
│
│ Prompt: Framebuffer Console support
│ Location:
│ -> Device Drivers
│ -> Graphics support
│ (1) -> Console display driver support
│ Defined at drivers/video/console/Kconfig:119
│ Depends on: VT [=y] && FB [=y] && !UML
│ Selects: VT_HW_CONSOLE_BINDING [=y] && CRC32 [=y] && FONT_SUPPORT [=y]
│ Selected by [y]:
│ - DRM_KMS_FB_HELPER [=y] && HAS_IOMEM [=y] && DRM_KMS_HELPER [=y] && !EXPERT
[=n]
------------------------------------------------------------------------------------
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
│ Symbol: FRAMEBUFFER_CONSOLE_DETECT_PRIMARY [=y] │
│ Type : bool │ Prompt: Map the console to the primary display device
│ Location:
│ -> Device Drivers
│ -> Graphics support
│ -> Console display driver support
│ (1) -> Framebuffer Console support (FRAMEBUFFER_CONSOLE [=y]) │
│ Defined at drivers/video/console/Kconfig:128
│ Depends on: VT [=y] && FRAMEBUFFER_CONSOLE [=y]
│ Selected by [y]:
│ - DRM_KMS_FB_HELPER [=y] && HAS_IOMEM [=y] && DRM_KMS_HELPER [=y] &&
FRAMEBUFFER_CONSOLE [=y]
|
TURKS HD6570
radeon/BTC_rlc.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/SUMO_uvd.bin
Esto es lo que me entrega el wiki de radeon para HD6570, no es una sola linea sino que TODO para todas esas tarjetas entre las cuáles está la mía.
| Code: | 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570/8550]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
|
| Code: | # nano /etc/genkernel.conf
Code:
######################################################################
INSTALL="yes"
# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
# catalyst and stage building.
# ¿Deberíamos instalar en $BOOTDIR? El valor predeterminado es "no" porque se usa genkernel en catalyst y stage building.
#INSTALL="yes"
INSTALL="yes"
-----------------------------------------------------------------------------------
#OLDCONFIG="yes"
OLDCONFIG="no"
# Run 'make oldconfig' before compiling this kernel?
# Ejecutar 'make oldconfig' antes de compilar este kernel?
OLDCONFIG="no"
-----------------------------------------------------------------------------------
MENUCONFIG="yes"
# Run 'make menuconfig' before compiling this kernel?
# Ejecutar 'make menuconfig' antes de compilar este kernel?
MENUCONFIG="yes"
-----------------------------------------------------------------------------------
#CLEAN="yes"
CLEAN="no"
# Run 'make clean' before compilation?
# Ejecutar 'make clean' antes de la compilación?
# If set to NO, implies MRPROPER WILL NOT be run
# Si se establece en NO, implica que MRPROPER NO se ejecutará
# Also, if clean is NO, it won't copy over any configuration
# Además, si clean es NO, no copiará ninguna configuración
# file, it will use what's there.
# archivo, usará lo que hay allí.
#CLEAN="yes"
CLEAN="no"
-----------------------------------------------------------------------------------
#MRPROPER="yes"
MRPROPER="no"
# Run 'make mrproper' before configuration/compilation?
# Ejecute 'make mrproper' antes de la configuración/compilación?
MRPROPER="no"
-----------------------------------------------------------------------------------
MOUNTBOOT="yes"
# Mount BOOTDIR automatically if it isn't mounted?
# ¿Montar BOOTDIR automáticamente si no está montado?
MOUNTBOOT="yes"
-----------------------------------------------------------------------------------
SYMLINK="yes"
# Make symlinks in BOOTDIR automatically?
# ¿Hacer enlaces simbólicos en BOOTDIR automáticamente?
#SYMLINK="no"
SYMLINK="yes"
-----------------------------------------------------------------------------------
SAVE_CONFIG="yes"
# Save the new configuration in /etc/kernels upon
# Guarda la nueva configuración en /etc/kernels en
# successfull compilation
# compilación exitosa
SAVE_CONFIG="yes"
-----------------------------------------------------------------------------------
USECOLOR="yes"
# Use Color output in Genkernel?
USECOLOR="yes"
-----------------------------------------------------------------------------------
MAKEOPTS="-j2"
># Genkernel uses an independent configuration for MAKEOPTS, and does not source /etc/make.conf.
># Genkernel usa una configuración independiente para MAKEOPTS, y no usa como fuente la de /etc/make.conf.
># You can override the default setting by uncommenting and tweaking the following line.
># Puedes sobreescribir la configuración predeterminada descomentando y ajustando la siguiente línea.
>Default setting is set up by ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh.
>La configuración predeterminada está configurada por ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh.
># The recommended value for -j argument is: <number of processors>*<number of cores per processor>+1
># El valor recomendado para el argumento -j es: <número de procesadores>*<número de núcleos por procesador> +1
#MAKEOPTS="-j2"
MAKEOPTS="-j2"
MAKEOPTS="-j3"
-----------------------------------------------------------------------------------
LVM="yes"
# Add in LVM support from static binaries if they exist on the system, or compile static LVM binaries if static ones do not exist.
# Agregue soporte LVM de binarios estáticos si existen en el sistema, o compile binarios LVM estáticos si no existen.
#LVM="no"
LVM="yes"
-----------------------------------------------------------------------------------
# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
# Agregar soporte de Luks. Necesita sys-fs/cryptsetup con -dynamic instalado.
#LUKS="no"
EN LA COMPILACIÓN DE kernel-config-x86_64-4.9.168_p1-debian-sources-lts si aparece LUKS en Funtoo
///////////////////////////////////////////////////////////////////////////////////
--no-save-config --no-old--config --kernel-config=/var/tmp/portage/sys-kernel/debian-sources-lts-4.9.168_p1/temp/config --kernname=debian-sources-lts --build-src=var/tmp/portage/sys-kernel/
--disklabel --lvm --luks --mdadm --module-prefix=/var/tmp/portage/sys-kernel/debiansources-lts-4.9.168_p2/work/out all
///////////////////////////////////////////////////////////////////////////////////
LUKS="yes"
-----------------------------------------------------------------------------------
# Add DMRAID support.
#DMRAID="no"
DMRAID="yes"
-----------------------------------------------------------------------------------
# Add BTRFS support.
#BTRFS="no"
BTRFS="yes"
-----------------------------------------------------------------------------------
BOOTLOADER="grub2" #### or grub
# Add new kernel to grub?
BOOTLOADER="grub2"
-----------------------------------------------------------------------------------
UDEV="yes"
NO TENGO LA OPCIÓN UDEV.
udev (user /dev) is systemd's device manager for the Linux kernel. It manages device nodes in /dev and handles all user space actions when adding or removing ...
-----------------------------------------------------------------------------------
MDADM_CONFIG="/etc/mdadm.conf"
# Specify a custom mdadm.conf.
# Especifique un mdadm.conf personalizado.
># By default the ramdisk will be built *without* an mdadm.conf and will auto-detect arrays during bootup.
># Por defecto, el ramdisk se construirá *sin* un mdadm.conf y detectará automáticamente los arreglos durante el arranque.
>Usually, this should not be needed.
>Por lo general, esto no debería ser necesario.
MDADM_CONFIG="/etc/mdadm.conf"
-----------------------------------------------------------------------------------
# Enable copying of firmware into initramfs
#FIRMWARE="no"
# Specify directory to pull from
FIRMWARE="yes"
# Specify directory to pull from
#FIRMWARE_SRC="/lib/firmware" # Specify specific firmware files to include. This overrides FIRMWARE_SRC
FIRMWARE_FILES="/lib/firmware/amd/amd_sev_fam17h_model0xh.sbin,/lib/firmware/amd-ucode/microcode_amd_fam17h.bin,/lib/firmware/amdgpu/vega10_acg_smc.bin, ........ and so on" |
-----------------------------------------------------------------------------------
| Quote: | >genkernel-next firmware does not load when using FIRMWARE_FILES option
>El firmware genkernel-next no se carga cuando se usa la opción FIRMWARE_FILES
FIRMWARE="yes"
# Specify directory to pull from
#FIRMWARE_SRC="/lib/firmware" # Specify specific firmware files to include. This overrides FIRMWARE_SRC
FIRMWARE_FILES="/lib/firmware/amd/amd_sev_fam17h_model0xh.sbin,/lib/firmware/amd-ucode/microcode_amd_fam17h.bin,/lib/firmware/amdgpu/vega10_acg_smc.bin, ........ and so on"
>If I cant get this to work, I will probably switch to genkernel + dracut or handle the copying through FRIMWARE_SRC with symlinks to the firmware I need, or build the firmware into the kernel.
> Si no puedo hacer que esto funcione, probablemente cambiaré a genkernel + dracut o manejaré la copia a través de FIRMWARE_SRC con enlaces simbólicos al firmware que necesito, o construiré el firmware en el kernel. |
Por lo tanto lo deje así:
| Code: | # Enable copying of firmware into initramfs
#FIRMWARE="no"
# Specify directory to pull from
FIRMWARE_SRC="/lib/firmware"
# Specify specific firmware files to include. This overrides FIRMWARE_SRC
# FIRMWARE_FILES=""
-----------------------------------------------------------------------------------
FIRMWARE_SRC="/lib/firmware/"
# FIRMWARE_SRC="/lib/firmware"
# Specify specific firmware files to include.
# Especifique archivos de firmware específicos para incluir.
This overrides FIRMWARE_SRC
Esto sobreescribe FIRMWARE_SRC
# FIRMWARE_FILES=""
FIRMWARE_SRC="/lib/firmware/"
-----------------------------------------------------------------------------------
FIRMWARE_FILES=" Your Firmware" #### Your Firmware
TMPDIR="/var/tmp/genkernel"
# Set genkernel's temporary work directory.
# Establece el directorio de trabajo temporal de genkernel.
Default is /var/tmp/genkernel
El valor predeterminado es /var/tmp/genkernel
#TMPDIR="/var/tmp/genkernel"
TMPDIR="/var/tmp/genkernel"
-----------------------------------------------------------------------------------
BOOTDIR="/boot"
># Set the boot directory, default is /boot
># Establece el directorio de arranque, el valor predeterminado es /boot
#BOOTDIR="/boot"
BOOTDIR="/boot"
-----------------------------------------------------------------------------------
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
# Default share directory location
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
-----------------------------------------------------------------------------------
CACHE_DIR="/var/cache/genkernel"
# Location of the default cache
CACHE_DIR="/usr/share/genkernel"
-----------------------------------------------------------------------------------
DISTDIR="/var/lib/genkernel/src"
# Location of DISTDIR, where our source tarballs are stored
# Ubicación de DISTDIR, donde se almacenan nuestros tarballs de origen
DISTDIR="${CACHE_DIR}/src"
-----------------------------------------------------------------------------------
LOGFILE="/var/log/genkernel.log"
# Log output file
LOGFILE="/var/log/genkernel.log"
-----------------------------------------------------------------------------------
LOGLEVEL=4
# Debug Level
LOGLEVEL=1
Lo cambie a 4
LOGLEVEL=4
-----------------------------------------------------------------------------------
DEFAULT_KERNEL_SOURCE="/usr/src/linux"
# Default location of kernel source
DEFAULT_KERNEL_SOURCE="/usr/src/linux"
-----------------------------------------------------------------------------------
COMPRESS_INITRD="yes"
# Compress generated initramfs
#COMPRESS_INITRD="yes"
COMPRESS_INITRD="yes"
-----------------------------------------------------------------------------------
># Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest "best" selects the best available compression method "fastest" selects the fastest available compression method
># Tipos de compresión: best, xz, lzma, bzip2, gzip, lzop, más rápido "mejor" selecciona el mejor método de compresión disponible "más rápido" selecciona el método de compresión más rápido disponible
#COMPRESS_INITRD_TYPE="best"
COMPRESS_INITRD_TYPE="best"
-----------------------------------------------------------------------------------
REAL_ROOT="/dev/sdxx" ##### your root
# Specify a default for real_root=
# Especifique un valor predeterminado para real_root =
#REAL_ROOT="/dev/one/two/gentoo"
REAL_ROOT="/dev/sda5"
REAL_ROOT="/dev/sdc3" (gentoo)
=================================================================
* >> Appending auxilary cpio data ...
* >> Copying '/usr/share/genkernel/defaults/linuxrc' to '/init' ...
* >> Copying '/usr/share/genkernel/defaults/initrd.scripts' to '/etc/initrd.scripts' ...
* >> Copying '/usr/share/genkernel/defaults/initrd.defaults' to '/etc/initrd.defaults' ...
* >> Setting REAL_ROOT to '/dev/sda3' in '/etc/initrd.defaults' ...
* >> Copying keymaps ...
================================================================= |
| Code: | user /usr/src/linux # cp /usr/src/linux/.config /root/config
user /usr/src/linux # cd /root/
genkernel --menuconfig --install --kernel-config=/root/config --bootloader=grub all |
Esto fue lo único que funcionó.
| Code: | user ~ # genkernel -menuconfig all
grub-install /dev/sda
grub-mkconfig -o /boot/grub/grub.cfg
# cat /boot/grub/grub.cfg
radeon.modeset=0
emerge --ask sys-kernel/linux-firmware
x11-drivers/xf86-video-ati
#emerge --ask --changed-use --deep @world
# emerge -a -uDU --with-bdeps=y @world --autounmask-write --autounmask-backtrack=y --keep-going --backtrack=50
|
Todo funciona, pero no recuerdo bien que hizo la diferencia entre antes y después del error de KMS con xorg al ejecutar $startx. |
|
| Back to top |
|
 |
pcmaster
Advocate
Joined: 04 Dec 2003
Posts: 2222
Location: Barcelona
|
| Posted: Wed Aug 19, 2020 1:15 pm Post subject: |
|
|
| Code: | | <-Ese [*] Enable modesetting on radeon by default NO LO TENGO!!! |
Intenta poner el driver radeon incluído en el kernel (*) y no como módulo (M) ya que para activar el Kernel Mode Settings ha de estar disponible el driver durante el arranque.
_________________
pcmaster |
|
| Back to top |
|
|
chrootman
Tux's lil' helper
Joined: 18 Aug 2020
Posts: 95
|
| Posted: Fri Aug 21, 2020 9:09 pm Post subject: |
|
|
| pcmaster wrote: | | Code: | | <-Ese [*] Enable modesetting on radeon by default NO LO TENGO!!! |
Intenta poner el driver radeon incluído en el kernel (*) y no como módulo (M) ya que para activar el Kernel Mode Settings ha de estar disponible el driver durante el arranque. |
Sí el error era similar a este:
https://forums.gentoo.org/viewtopic-t-1028976-start-0.html
https://forums.gentoo.org/viewtopic-t-1071724-start-0.html#8139530
| Code: | [ 489.169] (II) [KMS] drm report modesetting isn't supported.
[ 489.169] (II) [KMS] drm report modesetting isn't supported.
[ 489.169] (EE) Screen 0 deleted because of no matching config section.
[ 489.169] (II) UnloadModule: "radeon"
[ 489.169] (EE) Device(s) detected, but none match those in the config file.
[ 489.169] (EE)
Fatal server error:
[ 489.169] (EE) no screens found(EE) |
Siempre lo pongo el driver radeon incluído en el kernel (*) y no como módulo (M). Me pasó lo mismo en funtoo y también recompilé y volvió a funcionar, pero no tengo claro cual es la mala acción para no repetirla.
No tengo CONFIG_DRM_RADEON_KMS=y, si CONFIG_DRM_RADEON=y. También puede ser que me faltaba un update o algo antes de llegar a ese punto o hago antes algo que se debió hacer después. |
|
| Back to top |
|
|
quilosaq
Veteran
Joined: 22 Dec 2009
Posts: 1522
|
| Posted: Sat Aug 22, 2020 12:39 am Post subject: Re: ATI 6570 TURKS[KMS][legacy fbdev][modesetting on radeon] |
|
|
| chrootman wrote: | ...
| Code: | Device Drivers --->
Graphics support --->
<*/M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*/M> ATI Radeon
[*] Enable modesetting on radeon by default
-*- Support for frame buffer devices --->
< > ATI Radeon display support |
<-Ese [*] Enable modesetting on radeon by default NO LO TENGO!!!
... |
https://wiki.gentoo.org/wiki/Xorg/Guide#AMD.2FATI
En una nota en el artículo del enlace pone:
| Quote: | Note
Linux kernel >= 3.9 does not have the Enable modesetting on radeon by default since it is already implied by default. Do not be alarmed if you find this option missing in new kernels. |
|
|
| Back to top |
|
|
chrootman
Tux's lil' helper
Joined: 18 Aug 2020
Posts: 95
|
| Posted: Fri Apr 16, 2021 1:58 pm Post subject: |
|
|
Con esto desde el arranque aparece con res 1366x378.
| Code: | | | | | | "attached-gpu-control-path" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci-bridge@1/IOPP/GFX0@0/ATY,AMD,RadeonFramebuffer@0/ATIFramebufferNI/AGPM"
| | | | | "name" = "ATY_GPU" |
| Code: | Device (PCI0)
{
Name (_HID, EisaId ("PNP0A03"))
Name (_ADR, Zero)
Name (_UID, One)
Name (_BBN, Zero)
Device (PEG0)
{
Device (GFX0)
{
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x0E)
{
"@3,connector-type",
Buffer (0x04)
{
0x00, 0x08, 0x00, 0x00
},
"device-id",
Buffer (0x04)
{
0xD9, 0x68, 0x00, 0x00
},
"@0,name",
Buffer (0x1A)
{
"ATY,AMD,RadeonFramebuffer"
},
"@1,name",
Buffer (0x1A)
{
"ATY,AMD,RadeonFramebuffer"
},
"@2,name",
Buffer (0x1A)
{
"ATY,AMD,RadeonFramebuffer"
},
"model",
Buffer (0x13)
{
"AMD Radeon HD 6570"
},
"hda-gfx",
Buffer (0x0A)
{
"onboard-1"
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
Device (HDAU)
{
Name (_ADR, One)
OperationRegion (HDAH, PCI_Config, Zero, 0x40)
Field (HDAH, ByteAcc, NoLock, Preserve)
{
VID0, 16,
DID0, 16
}
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x06)
{
"hda-gfx",
Buffer (0x0A)
{
"onboard-2"
},
"layout-id",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},
"PinConfigurations",
Buffer (0x04)
{
0xE0, 0x00, 0x56, 0x28
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
} |
| Code: | # cd Downloads/
# mkdir -p kernel/firmware/acpi
# cp dsdt.aml SSDT.aml kernel/firmware/acpi
# find kernel | cpio -H newc --create > acpi_override
40 blocks
# ls -lia acpi_override
1320314 -rw-r--r-- 1 root root 20480 Mar 21 04:35 acpi_override
# sudo mount /boot
# sudo cp acpi_override /boot |
/etc/default/grub
| Code: | GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 ipv6.disable=1 resume=UUID=cb6c09hb-7ha4-4c41-89la-c67c807h7202"
GRUB_CMDLINE_LINUX="rootfstype=ext4 init=/usr/lib/systemd/systemd real_root=UUID=c76539db9y-6fba-380b-854c-d28edb8796jo"
GRUB_EARLY_INITRD_LINUX_CUSTOM=acpi_override |
| Code: | | $ sudo grub-mkconfig -o /boot/grub/grub.cfg |
| Code: | # dmesg | grep DSDT
[ 0.018472] ACPI: DSDT ACPI table found in initrd [kernel/firmware/acpi/dsdt.aml]
# dmesg | grep SSDT
[ 0.018475] ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/SSDT.aml] |
https://forums.gentoo.org/viewtopic-t-122145-start-0.html
https://forums.gentoo.org/viewtopic-t-924110-start-50.html
https://forums.gentoo.org/viewtopic-t-1098226-highlight-dsdt.html
https://forums.gentoo.org/viewtopic-t-1088712-start-0.html
https://gist.github.com/javanna/38d019a373085e1ba0c784597bc7ec73 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
