| View previous topic :: View next topic |
| Author |
Message |
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
 Posted: Thu Jun 11, 2020 12:36 pm Post subject: [Solved] Output freezes when switching to AMDGPU framebuffer |
 |
|
When the boot process reaches the line "fb0: switching to amdgpudrmfb from simple" it freezes
Here is dmesg:
| Code: | [ 2.540923] [drm] amdgpu kernel modesetting enabled.
[ 2.542198] Parsing CRAT table with 1 nodes
[ 2.543276] Creating topology SYSFS entries
[ 2.544364] Topology: Add APU node [0x0:0x0]
[ 2.545409] Finished initializing topology
[ 2.546501] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[ 2.546502] fb0: switching to amdgpudrmfb from simple
[ 2.547674] Console: switching to colour dummy device 80x25
[ 2.547701] amdgpu 0000:05:00.0: vgaarb: deactivate vga console
[ 2.547730] amdgpu 0000:05:00.0: enabling device (0006 -> 0007)
[ 2.547799] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0x83).
[ 2.547814] [drm] register mmio base: 0xFE700000
[ 2.547815] [drm] register mmio size: 524288
[ 2.547835] [drm] add ip block number 0 <soc15_common>
[ 2.547837] [drm] add ip block number 1 <gmc_v9_0>
[ 2.547838] [drm] add ip block number 2 <vega10_ih>
[ 2.547840] [drm] add ip block number 3 <psp>
[ 2.547841] [drm] add ip block number 4 <gfx_v9_0>
[ 2.547842] [drm] add ip block number 5 <sdma_v4_0>
[ 2.547844] [drm] add ip block number 6 <powerplay>
[ 2.547845] [drm] add ip block number 7 <dm>
[ 2.547847] [drm] add ip block number 8 <vcn_v1_0>
[ 2.558306] EDAC amd64: F17h_M10h detected (node 0).
[ 2.558408] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.562875] ATOM BIOS: 113-RAVEN-113
[ 2.563982] [drm] VCN decode is enabled in VM mode
[ 2.563988] [drm] VCN encode is enabled in VM mode
[ 2.563992] [drm] JPEG decode is enabled in VM mode
[ 2.564066] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 2.564084] amdgpu 0000:05:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[ 2.564090] amdgpu 0000:05:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 2.564097] amdgpu 0000:05:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 2.564107] [drm] Detected VRAM RAM=1024M, BAR=1024M
[ 2.564110] [drm] RAM width 128bits DDR4
[ 2.564233] [TTM] Zone kernel: Available graphics memory: 3534784 KiB
[ 2.564239] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 2.564243] [TTM] Initializing pool allocator
[ 2.564251] [TTM] Initializing DMA pool allocator
[ 2.564343] [drm] amdgpu: 1024M of VRAM memory ready
[ 2.564349] [drm] amdgpu: 3072M of GTT memory ready.
[ 2.564355] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.564792] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 2.576242] EDAC amd64: F17h_M10h detected (node 0).
[ 2.576513] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.590059] [drm] use_doorbell being set to: [true]
[ 2.590144] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[ 2.592323] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[ 2.592338] [drm] PSP loading VCN firmware
[ 2.642193] [drm] reserve 0x400000 from 0xf43f800000 for PSP TMR
[ 2.652764] [drm] failed to load ucode id (0)
[ 2.652766] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.656761] [drm] failed to load ucode id (8)
[ 2.656763] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.660759] [drm] failed to load ucode id (9)
[ 2.660760] [drm] psp command (0x6) failed and response status is (0xFFFF000F)
[ 2.663785] [drm] failed to load ucode id (10)
[ 2.663787] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.666798] [drm] failed to load ucode id (11)
[ 2.666801] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.669793] [drm] failed to load ucode id (12)
[ 2.669795] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.672789] [drm] failed to load ucode id (13)
[ 2.672791] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.675799] [drm] failed to load ucode id (14)
[ 2.675801] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.678800] [drm] failed to load ucode id (17)
[ 2.678803] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.681767] [drm] failed to load ucode id (18)
[ 2.681769] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.684792] Adding 32767996k swap on /dev/sda2. Priority:-2 extents:1 across:32767996k FS
[ 2.684793] [drm] failed to load ucode id (19)
[ 2.684796] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.688759] [drm] failed to load ucode id (20)
[ 2.688761] [drm] psp command (0x6) failed and response status is (0xFFFF300F)
[ 2.694787] [drm] failed to load ucode id (26)
[ 2.694789] [drm] psp command (0x6) failed and response status is (0xFFFF000F)
[ 2.697798] [drm] psp command (0x4) failed and response status is (0x34)
[ 2.697810] amdgpu 0000:05:00.0: RAS: optional ras ta ucode is not available
[ 2.700839] [drm] psp command (0x1) failed and response status is (0x34)
[ 2.703772] [drm] psp command (0x1) failed and response status is (0x34)
[ 2.705698] amdgpu 0000:05:00.0: [gfxhub0] no-retry page fault (src_id:0 ring:221 vmid:0 pasid:0, for process pid 0 thread pid 0)
[ 2.705706] amdgpu 0000:05:00.0: in page starting at address 0x0000000000000000 from client 27
[ 2.705712] amdgpu 0000:05:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000BBA
[ 2.705715] amdgpu 0000:05:00.0: MORE_FAULTS: 0x0
[ 2.705719] amdgpu 0000:05:00.0: WALKER_ERROR: 0x5
[ 2.705722] amdgpu 0000:05:00.0: PERMISSION_FAULTS: 0xb
[ 2.705725] amdgpu 0000:05:00.0: MAPPING_ERROR: 0x1
[ 2.705728] amdgpu 0000:05:00.0: RW: 0x0
[ 2.705878] [drm] kiq ring mec 2 pipe 1 q 0
[ 3.004574] amdgpu 0000:05:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110)
[ 3.004668] [drm:amdgpu_gfx_enable_kcq.cold [amdgpu]] *ERROR* KCQ enable failed
[ 3.004759] [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <gfx_v9_0> failed -110
[ 3.004767] amdgpu 0000:05:00.0: amdgpu_device_ip_init failed
[ 3.004770] amdgpu 0000:05:00.0: Fatal error during GPU init
[ 3.004788] [drm] amdgpu: finishing device.
[ 3.007766] [drm] psp command (0x2) failed and response status is (0x117)
[ 3.008275] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.011784] [drm] psp command (0x2) failed and response status is (0x117)
[ 3.014896] [drm] psp command (0x2) failed and response status is (0x117)
[ 3.084258] [TTM] Finalizing pool allocator
[ 3.084262] [TTM] Finalizing DMA pool allocator
[ 3.084483] [TTM] Zone kernel: Used memory at exit: 0 KiB
[ 3.084486] [TTM] Zone dma32: Used memory at exit: 0 KiB
[ 3.084488] [drm] amdgpu: ttm finalized
[ 3.084583] [drm] Initialized amdgpu 3.37.0 20150101 for 0000:05:00.0 on minor 0 |
AMDGPU is compiled as a module, so it should be able to find the relevant firmware, but I also tried compiling the firmware into the kernel with no success
Last edited by minkanjin on Sun Jun 14, 2020 5:03 pm; edited 1 time in total |
|
| Back to top |
|
 |
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3882
|
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
| Posted: Thu Jun 11, 2020 3:11 pm Post subject: |
|
|
| My problem is different. They have missing firmware, mine finds the firmware but doesn't load it correctly |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6139
Location: Dallas area
|
| Posted: Thu Jun 11, 2020 3:54 pm Post subject: |
|
|
lspci -nnk
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
| Posted: Thu Jun 11, 2020 4:13 pm Post subject: |
|
|
| Code: | 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex [1022:15d0]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex [1022:15d0]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3]
Kernel driver in use: pcieport
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3]
Kernel driver in use: pcieport
00:01.6 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3]
Kernel driver in use: pcieport
00:01.7 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3]
Kernel driver in use: pcieport
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A [1022:15db]
Kernel driver in use: pcieport
00:08.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B [1022:15dc]
Kernel driver in use: pcieport
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b]
Kernel driver in use: piix4_smbus
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0 [1022:15e8]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1 [1022:15e9]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2 [1022:15ea]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3 [1022:15eb]
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4 [1022:15ec]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5 [1022:15ed]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6 [1022:15ee]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7 [1022:15ef]
03:00.0 Network controller [0280]: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] [8086:24fb] (rev 10)
Subsystem: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] [8086:2110]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:0123]
Kernel driver in use: r8169
05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev 83)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd]
Kernel driver in use: amdgpu
Kernel modules: amdgpu
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de]
Kernel driver in use: snd_hda_intel
05:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
Kernel driver in use: ccp
05:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e0]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:7914]
Kernel driver in use: xhci_hcd
05:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e1]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:7914]
Kernel driver in use: xhci_hcd
05:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2]
Kernel modules: snd_pci_acp3x
05:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3]
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:d001]
Kernel driver in use: snd_hda_intel
05:00.7 Non-VGA unclassified device [0000]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir Non-Sensor Fusion Hub KMDF driver [1022:15e6]
Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir Sensor Fusion Hub [1022:15e4]
Kernel driver in use: i2c_amd_mp2
06:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61)
Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901]
Kernel driver in use: ahci |
|
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6139
Location: Dallas area
|
| Posted: Thu Jun 11, 2020 4:25 pm Post subject: |
|
|
wgetpaste your .config for the current kernel and post the link
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
|
| Back to top |
|
|
nick_gentoo
Tux's lil' helper
Joined: 07 Jan 2019
Posts: 140
|
| Posted: Fri Jun 12, 2020 9:45 pm Post subject: |
|
|
As a quick check: here you can find the list of firmware files that you need, installed by sys-kernel/linux-firmware.
Do you have those in your /lib/firmware directory? |
|
| Back to top |
|
|
leandrolnh
n00b
Joined: 28 Sep 2019
Posts: 20
Location: Brasil
|
| Posted: Sat Jun 13, 2020 3:26 am Post subject: |
|
|
| Code: | | CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y |
Try unsetting this, as this is known to cause issues with amdgpu. |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6139
Location: Dallas area
|
| Posted: Sat Jun 13, 2020 9:22 am Post subject: |
|
|
| leandrolnh wrote: | | Code: | | CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y |
Try unsetting this, as this is known to cause issues with amdgpu. |
Unset this CONFIG_AMD_MEM_ENCRYPT=y and the other should be disabled
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
| Posted: Sat Jun 13, 2020 3:52 pm Post subject: |
|
|
| That did something, but now I have a new problem. The boot process goes past the previous issue, but when I reach the console log in, it shows a blank screen. I can log in blindly and start gdm which works fine. If I try to switch back to a console, the last gnome image stays frozen on the screen. |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6139
Location: Dallas area
|
| Posted: Sat Jun 13, 2020 4:03 pm Post subject: |
|
|
wgetpaste the whole dmesg output from boot till console log in.
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54508
Location: 56N 3W
|
| Posted: Sat Jun 13, 2020 4:27 pm Post subject: |
|
|
minkanjin,
Your dmesg should include | Code: | | switching to amdgpudrmfb |
but its missing.
Instead you are using simple framebuffer.
Thats OK but the kernel cannot configure it, so there is often no going back.
Alt-F7 should get you back to your Gnome session.
Its a kernel setting. Please pastebin your kernel .config file as it is now.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6139
Location: Dallas area
|
| Posted: Sat Jun 13, 2020 4:41 pm Post subject: |
|
|
If he didn't change the settings from earlier, there may be a couple of reasons for the amdgpu not to initialize.
I'm pretty sure you don't need this
CONFIG_HSA_AMD=y
Not sure about this, but it's not needed for normal displays.
CONFIG_DRM_PANEL=y
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
leandrolnh
n00b
Joined: 28 Sep 2019
Posts: 20
Location: Brasil
|
| Posted: Sat Jun 13, 2020 5:16 pm Post subject: |
|
|
| Code: | | # CONFIG_DRM_FBDEV_EMULATION is not set |
You should set this in order to enable amdgpudrmfb. |
|
| Back to top |
|
|
minkanjin
n00b
Joined: 29 Jan 2017
Posts: 42
|
| Posted: Sun Jun 14, 2020 5:02 pm Post subject: |
|
|
| That fixed it |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
