Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Pi-hole
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Fri Nov 01, 2019 12:12 pm    Post subject: Pi-hole Reply with quote

Hello, I need to install pi-hole on gentoo.
RPI 4 1024MB RAM freezes, ddns stops working, and that's not acceptable. I don't want to install the ubuntu virtual machine from pihole.

Can anyone help install Pi-hole on gentoo?
At this link -> https://discourse.pi-hole.net/t/add-gentoo-as-a-supported-os/2011 ,
somebody added support for gentoo. Unfortunately, the patches are not up to date. Please help.
Back to top
View user's profile Send private message
r7l
n00b
n00b


Joined: 16 Feb 2019
Posts: 46

PostPosted: Mon Nov 04, 2019 8:27 pm    Post subject: Reply with quote

There is no Pi-Hole ebuild in portage or in any of the listed overlays. What is it you're aiming for? I have pretty much the same with a script in a cron job and dnsmasq.

What my script does is pulling in a host list from here: https://github.com/StevenBlack/hosts
Then i use a number of sed lines to remove stuff i don't want to be blocked (there is some MS stuff and image boards blocked there).
In the end it adds a few other domains that i miss.

So this runs once every few days and apart from the shiny interface, it should be exactly the same.

It might also be possible to use Unbound for this.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 634
Location: Winnipeg, Canada

PostPosted: Mon Nov 04, 2019 8:56 pm    Post subject: Reply with quote

there's one way that does work well to install pi-hole on gentoo and that's using docker. There's an official docker image for pi-hole. I've been attempting to set it up on my own server today but i'm still a docker novice.

1GB of ram may be a limiting factor but it may just work.


Code:
# docker search pihole
NAME                           DESCRIPTION                                     STARS               OFFICIAL            AUTOMATED
pihole/pihole                  The official Pi-hole Docker image from pi-ho…   550


Docker github page has a docker-compose yaml template to aid with setup

https://github.com/pi-hole/docker-pi-hole
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Tue Nov 05, 2019 5:20 pm    Post subject: Reply with quote

r7l wrote:
There is no Pi-Hole ebuild in portage or in any of the listed overlays. What is it you're aiming for? I have pretty much the same with a script in a cron job and dnsmasq.

What my script does is pulling in a host list from here: https://github.com/StevenBlack/hosts
Then i use a number of sed lines to remove stuff i don't want to be blocked (there is some MS stuff and image boards blocked there).
In the end it adds a few other domains that i miss.

So this runs once every few days and apart from the shiny interface, it should be exactly the same.

It might also be possible to use Unbound for this.


The price for it is that it shows me which websites were blocked because sometimes it needs to be unlocked. A cool feature is also the temporary deactivation of the lock. I also need the wildcard function.
"StevenBlack" lists are not enough for me, I have + 7 own hosts:
Code:
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/hostfile.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/easylist_host.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/easy_privacy_host.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/gambling-hosts.txt   
   https://raw.githubusercontent.com/hoshsadiq/adblock-nocoin-list/master/hosts.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_host.txt   
   https://raw.githubusercontent.com/ZeroDot1/CoinBlockerLists/master/hosts   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/Ad_filter_list_by_Disconnect.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/Peter_Lowe_ADS.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_crypto_host.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_mobile_host.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/ads-and-tracking-extended.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/ads-and-tracking.txt   
   https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adservers.txt   
   https://www.tranzystor.pl/pliki/phishing.txt   
   https://www.tranzystor.pl/pliki/malware.txt   
   https://www.tranzystor.pl/pliki/black_list_porno.txt   
   https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts   
   https://mirror1.malwaredomains.com/files/justdomains   
   http://sysctl.org/cameleon/hosts   
   https://zeustracker.abuse.ch/blocklist.php?download=domainblocklist   
   https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt   
   https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt   
   https://hosts-file.net/ad_servers.txt   
   https://gitlab.com/ookangzheng/dbl-oisd-nl/raw/master/dbl.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/adaway.org/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/adblock-nocoin-list/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/adguard-simplified/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/anudeepnd-adservers/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-ad/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-malvertising/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-malware/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-tracking/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/easylist/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/easyprivacy/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/eth-phishing-detect/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.2o7net/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.dead/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.risk/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.spam/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/kadhosts/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomainlist.com/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomains.com-immortaldomains/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomains.com-justdomains/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/matomo.org-spammers/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/mitchellkrogza-badd-boyz-hosts/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/pgl.yoyo.org/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/ransomwaretracker.abuse.ch/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/someonewhocares.org/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/spam404.com/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/stevenblack/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/winhelp2002.mvps.org/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/zerodot1-coinblockerlists-browser/list.txt   
   https://raw.githubusercontent.com/hectorm/hmirror/master/data/zeustracker.abuse.ch/list.txt   
   https://raw.githubusercontent.com/CHEF-KOCH/Audio-fingerprint-pages/master/AudioFp.txt   
   https://raw.githubusercontent.com/CHEF-KOCH/Canvas-fingerprinting-pages/master/Canvas.txt   
   https://raw.githubusercontent.com/CHEF-KOCH/WebRTC-tracking/master/WebRTC.txt   
   https://raw.githubusercontent.com/CHEF-KOCH/CKs-FilterList/master/Anti-Corp/hosts/NSABlocklist.txt   
   https://gitlab.com/quidsup/notrack-blocklists/raw/master/notrack-blocklist.txt   
   https://gitlab.com/quidsup/notrack-blocklists/raw/master/notrack-malware.txt   
   https://www.stopforumspam.com/downloads/toxic_domains_whole.txt
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Tue Nov 05, 2019 5:40 pm    Post subject: Reply with quote

ali3nx wrote:
there's one way that does work well to install pi-hole on gentoo and that's using docker. There's an official docker image for pi-hole. I've been attempting to set it up on my own server today but i'm still a docker novice.

1GB of ram may be a limiting factor but it may just work.


Code:
# docker search pihole
NAME                           DESCRIPTION                                     STARS               OFFICIAL            AUTOMATED
pihole/pihole                  The official Pi-hole Docker image from pi-ho…   550


Docker github page has a docker-compose yaml template to aid with setup

https://github.com/pi-hole/docker-pi-hole

I am surprised that I did not know that Docker is a more efficient environment than a virtual machine. I don't want to lose the processor core or 1 GB RAM on the virtual machine.
I got an error during installation.

Code:
>>> Jobs: 1 of 10 complete, 1 failed                Load avg: 1.00, 1.04, 0.60
 * Package:    app-emulation/docker-proxy-0.8.0_p20190513
 * Repository: gentoo
 * Maintainer: tianon@dockerproject.org mrueg@gentoo.org,williamh@gentoo.org
 * USE:        abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox selinux sesandbox userpriv usersandbox
!!! Failed to set new SELinux execution context. Is your current SELinux context allowed to run Portage?
>>> Unpacking source...
>>> Source unpacked in /var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work
!!! Failed to set new SELinux execution context. Is your current SELinux context allowed to run Portage?
>>> Preparing source in /var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork ...
>>> Source prepared.
!!! Failed to set new SELinux execution context. Is your current SELinux context allowed to run Portage?
>>> Configuring source in /var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork ...
>>> Source configured.
!!! Failed to set new SELinux execution context. Is your current SELinux context allowed to run Portage?
>>> Compiling source in /var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork ...
failed to initialize build cache at /tmp/mustang01/.cache/go-build: mkdir /tmp/mustang01/.cache/go-build: permission denied
 * ERROR: app-emulation/docker-proxy-0.8.0_p20190513::gentoo failed (compile phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line 125:  Called src_compile
 *   environment, line 463:  Called die
 * The specific snippet of code:
 *       GOPATH="${WORKDIR}/${P}" go build -o "bin/docker-proxy" ./cmd/proxy || die
 *
 * If you need support, post the output of `emerge --info '=app-emulation/docker-proxy-0.8.0_p20190513::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-emulation/docker-proxy-0.8.0_p20190513::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/temp/environment'.
 * Working directory: '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork'
 * S: '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork'

 * Messages for package app-emulation/docker-proxy-0.8.0_p20190513:

 * ERROR: app-emulation/docker-proxy-0.8.0_p20190513::gentoo failed (compile phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line 125:  Called src_compile
 *   environment, line 463:  Called die
 * The specific snippet of code:
 *       GOPATH="${WORKDIR}/${P}" go build -o "bin/docker-proxy" ./cmd/proxy || die
 *
 * If you need support, post the output of `emerge --info '=app-emulation/docker-proxy-0.8.0_p20190513::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-emulation/docker-proxy-0.8.0_p20190513::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/temp/environment'.
 * Working directory: '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork'
 * S: '/var/tmp/portage/app-emulation/docker-proxy-0.8.0_p20190513/work/docker-proxy-0.8.0_p20190513/src/github.com/docker/libnetwork'

 * GNU info directory index is up-to-date.
Back to top
View user's profile Send private message
fedeliallalinea
Bodhisattva
Bodhisattva


Joined: 08 Mar 2003
Posts: 23462
Location: here

PostPosted: Tue Nov 05, 2019 5:45 pm    Post subject: Reply with quote

Can help this?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 634
Location: Winnipeg, Canada

PostPosted: Tue Nov 05, 2019 5:59 pm    Post subject: Reply with quote

fedeliallalinea wrote:
Can help this?


That definitely could be positive direction.

This stands out for possible added complications.

Code:
Failed to set new SELinux execution context. Is your current SELinux context allowed to run Portage?


I try to avoid enabling or supporting selinux if it's unnecessary. general uses for hardened gentoo would be a necessary benefit otherwise if not then avoid if you have no need of selinux.

Given the selinux errors which portage profile are you using?
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Tue Nov 05, 2019 8:59 pm    Post subject: Reply with quote

default/linux/amd64/17.1/hardened/selinux (stable) *
I use my gentoo as a home router and server. I have xfce4 graphical environment installed in it. Do you recommend turning off selinux?
I thought selinux was configured incorrectly. I use this gentoo profile for the first time, I have been working on desktop more often.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 634
Location: Winnipeg, Canada

PostPosted: Tue Nov 05, 2019 9:30 pm    Post subject: Reply with quote

mustang01 wrote:
default/linux/amd64/17.1/hardened/selinux (stable) *
I use my gentoo as a home router and server. I have xfce4 graphical environment installed in it. Do you recommend turning off selinux?
I thought selinux was configured incorrectly. I use this gentoo profile for the first time, I have been working on desktop more often.


There's may be some additional config for selinux rbac profiles for portage that's necessary based on the errors but i'm not that familiar with selinux tuning. you might try asking on irc in#hardened-gentoo on freenode or perhaps fedeliallalinea has a suggestion. usually a very knowledgable fellow that one. hardened gentoo irc channel someone will have some recommendations for certain

given your using the selinux hardened profile i'm not keen to recommend disabling selinux purely based on my lack of recent experience with hardened gentoo or selinux. Years ago i used to use grsecurity and hardened but that was many years ago :)
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Mon Nov 11, 2019 5:08 pm    Post subject: Reply with quote

I entered in the console:
Code:

#FEATURES="-selinux -sesandbox" emerge -av app-emulation/docker
#emerge -av docker-compose
#docker pull pihole/pihole
#docker run -e ServerIP=192.168.0.1 -e TZ=Europe/Warsaw -e WEBPASSWORD=***** -p 8180:80 -p 53:53/tcp -p 53:53/udp  --dns=194.204.159.1 --dns=185.89.185.1 -v /dir/for/pihole:/etc/pihole -v /dir/for/dnsmasq.d:/etc/dnsmasq.d pihole/pihole


Pihole started with an error:
Code:

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] 01-resolver-resolv: applying...
[fix-attrs.d] 01-resolver-resolv: exited 0.
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 20-start.sh: executing...
 ::: Starting docker specific checks & setup for docker pihole/pihole
WARNING Misconfigured DNS in /etc/resolv.conf: Primary DNS should be 127.0.0.1 (found 194.204.159.1)

nameserver 194.204.159.1
nameserver 185.89.185.1
  [i] Existing PHP installation detected : PHP version 7.0.33-0+deb9u5

  [i] Installing configs from /etc/.pihole...
  [i] Existing dnsmasq.conf found... it is not a Pi-hole file, leaving alone!
  [✓] Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf
chown: cannot access '/etc/pihole/dhcp.leases': No such file or directory
::: Pre existing WEBPASSWORD found
Using default DNS servers: 8.8.8.8 & 8.8.4.4
DNSMasq binding to default interface: eth0
Added ENV to php:
         "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log",
         "ServerIP" => "192.168.0.1",
         "VIRTUAL_HOST" => "192.168.0.1",
Using IPv4 and IPv6
::: Preexisting ad list /etc/pihole/adlists.list detected ((exiting setup_blocklists early))
https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
https://mirror1.malwaredomains.com/files/justdomains
http://sysctl.org/cameleon/hosts
https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
https://hosts-file.net/ad_servers.txt
::: Testing pihole-FTL DNS: FTL started!
::: Testing lighttpd config: Syntax OK
::: All config checks passed, cleared for startup ...
 ::: Docker start setup complete
  [i] Pi-hole blocking is enabled
  [i] Neutrino emissions detected...
  [✓] Pulling blocklist source list into range

  [i] Target: raw.githubusercontent.com (hosts)
  [✓] Status: Retrieval successful

  [i] Target: mirror1.malwaredomains.com (justdomains)
  [✓] Status: No changes detected

  [i] Target: sysctl.org (hosts)
  [✓] Status: No changes detected

  [i] Target: s3.amazonaws.com (simple_tracking.txt)
  [✓] Status: No changes detected

  [i] Target: s3.amazonaws.com (simple_ad.txt)
  [✓] Status: No changes detected

  [i] Target: hosts-file.net (ad_servers.txt)
  [✓] Status: No changes detected

  [✓] Consolidating blocklists
  [✓] Extracting domains from blocklists
  [i] Number of domains being pulled in by gravity: 138911
  [✓] Removing duplicate domains
  [i] Number of unique domains trapped in the Event Horizon: 116701
  [i] Nothing to whitelist!
  [i] Number of regex filters: 0
  [✓] Parsing domains into hosts format
  [✓] Cleaning up stray matter

  [✓] DNS service is running
  [✓] Pi-hole blocking is Enabled
[cont-init.d] 20-start.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
Starting crond
Starting pihole-FTL (no-daemon) as root
Starting lighttpd

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session
[services.d] done.
Stopping pihole-FTL
Starting pihole-FTL (no-daemon) as root

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session




Cannot make/remove an entry for the specified session
Stopping pihole-FTL
Starting pihole-FTL (no-daemon) as root
^Z^X^CStopping pihole-FTL
Stopping cron
[cont-finish.d] executing container finish scripts...
Stopping lighttpd
[cont-finish.d] done.
[s6-finish] syncing disks.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
serwo /home/mustang01/docker-pi-hole # docker run -e ServerIP=192.168.0.1 -e TZ=Europe/Warsaw -e WEBPASSWORD=***** -p 8180:80 -p 53:53/tcp -p 53:53/udp --dns=194.204.159.1 --dns=185.89.185.1 -v /dir/for/pihole:/etc/pihole:z -v /dir/for/dnsmasq.d:/etc/dnsmasq.d:z pihole/pihole
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] 01-resolver-resolv: applying...
[fix-attrs.d] 01-resolver-resolv: exited 0.
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 20-start.sh: executing...
 ::: Starting docker specific checks & setup for docker pihole/pihole
WARNING Misconfigured DNS in /etc/resolv.conf: Primary DNS should be 127.0.0.1 (found 194.204.159.1)

nameserver 194.204.159.1
nameserver 185.89.185.1
  [i] Existing PHP installation detected : PHP version 7.0.33-0+deb9u5

  [i] Installing configs from /etc/.pihole...
  [i] Existing dnsmasq.conf found... it is not a Pi-hole file, leaving alone!
  [✓] Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf
chown: cannot access '/etc/pihole/dhcp.leases': No such file or directory
::: Pre existing WEBPASSWORD found
Using default DNS servers: 8.8.8.8 & 8.8.4.4
DNSMasq binding to default interface: eth0
Added ENV to php:
         "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log",
         "ServerIP" => "192.168.0.1",
         "VIRTUAL_HOST" => "192.168.0.1",
Using IPv4 and IPv6
::: Preexisting ad list /etc/pihole/adlists.list detected ((exiting setup_blocklists early))
https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
https://mirror1.malwaredomains.com/files/justdomains
http://sysctl.org/cameleon/hosts
https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
https://hosts-file.net/ad_servers.txt
::: Testing pihole-FTL DNS: FTL started!
::: Testing lighttpd config: Syntax OK
::: All config checks passed, cleared for startup ...
 ::: Docker start setup complete
  [i] Pi-hole blocking is enabled
  [i] Neutrino emissions detected...
  [✓] Pulling blocklist source list into range

  [i] Target: raw.githubusercontent.com (hosts)
  [✓] Status: Retrieval successful

  [i] Target: mirror1.malwaredomains.com (justdomains)
  [✓] Status: No changes detected

  [i] Target: sysctl.org (hosts)
  [✓] Status: No changes detected

  [i] Target: s3.amazonaws.com (simple_tracking.txt)
  [✓] Status: No changes detected

  [i] Target: s3.amazonaws.com (simple_ad.txt)
  [✓] Status: No changes detected

  [i] Target: hosts-file.net (ad_servers.txt)
  [✓] Status: No changes detected

  [✓] Consolidating blocklists
  [✓] Extracting domains from blocklists
  [i] Number of domains being pulled in by gravity: 138911
  [✓] Removing duplicate domains
  [i] Number of unique domains trapped in the Event Horizon: 116701
  [i] Nothing to whitelist!
  [i] Number of regex filters: 0
  [✓] Parsing domains into hosts format
  [✓] Cleaning up stray matter

  [✓] DNS service is running
  [✓] Pi-hole blocking is Enabled
[cont-init.d] 20-start.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
Starting lighttpd
Starting crond
Starting pihole-FTL (no-daemon) as root

Cannot make/remove an entry for the specified session
[services.d] done.

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session

Cannot make/remove an entry for the specified session


Web UI works at http://192.168.0.1:8180/admin/. Dnsmasq does not work, so the dns server does not work.

When I execute the script from https://github.com/pi-hole/docker-pi-hole/blob/master/docker_run.sh I get the error:
Code:
# sh docker_run.sh
docker: invalid publish opts format (should be name=value but got '53:53/tcp').
See 'docker run --help'.
Starting up pihole container Error: No such object: pihole
.Error: No such object: pihole
.Error: No such object: pihole
.Error: No such object: pihole
.Error: No such object: pihole
.Error: No such object: pihole


Last edited by mustang01 on Tue Nov 12, 2019 6:54 pm; edited 1 time in total
Back to top
View user's profile Send private message
axl
l33t
l33t


Joined: 11 Oct 2002
Posts: 908
Location: Romania

PostPosted: Mon Nov 11, 2019 5:47 pm    Post subject: Reply with quote

isn't the entire project just a blacklist of hosts.conf? i never actually took a look at this, but I will. tomorrow. too much request.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 634
Location: Winnipeg, Canada

PostPosted: Mon Nov 11, 2019 5:54 pm    Post subject: Reply with quote

pi hole's dnsmasq service cannot start if there's a dns service or listener active on the host system. Just learning docker this appears to be one of the flaws of using docker but i'm still learning.

I used
Quote:
netstat -l -n -p

to view the services bound to any active network ports which revealed systemd-resolv was responsible in my case. You must run netstat with root privileges to see the service names.

the pi-hole docker documentation mentions something regarding this. When i attempted to start pi-hole on my server that runs systemd and used systemd-resolv active pi-hole docker container fails to initialize due to a dns port bind allocation failure because systemd-resolv is listening already on port 53.

Code:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      3683/systemd-resolv


Code:
docker-compose up
Starting pihole ... error

ERROR: for pihole  Cannot start service pihole: driver failed programming external connectivity on endpoint pihole (cb8fcd65a6e56312074e55f3b1e84603a2e3ab5cb3f197c578018b29b721010f): Error starting userland proxy: listen tcp 0.0.0.0:53: bind: address already in use

ERROR: for pihole  Cannot start service pihole: driver failed programming external connectivity on endpoint pihole (cb8fcd65a6e56312074e55f3b1e84603a2e3ab5cb3f197c578018b29b721010f): Error starting userland proxy: listen tcp 0.0.0.0:53: bind: address already in use
ERROR: Encountered errors while bringing up the project.


This also stood out among the console text.

Code:
::: Starting docker specific checks & setup for docker pihole/pihole
WARNING Misconfigured DNS in /etc/resolv.conf: Primary DNS should be 127.0.0.1 (found 194.204.159.1)



Here's the docker-compose.yml template i was using.

Code:
$ cat docker-compose.yml
version: "3"

# More info at https://github.com/pi-hole/docker-pi-hole/ and https://docs.pi-hole.net/
services:
  pihole:
    container_name: pihole
    image: pihole/pihole:latest
    ports:
      - "53:53/tcp"
      - "53:53/udp"
      - "67:67/udp"
      - "8080:80/tcp"
      - "4443:443/tcp"
    environment:
      TZ: 'America/Winnipeg'
      WEBPASSWORD: '123456789'
    # Volumes store your data between container upgrades
    volumes:
       - './etc-pihole/:/etc/pihole/'
       - './etc-dnsmasq.d/:/etc/dnsmasq.d/'
    dns:
      - 127.0.0.1
      - 1.1.1.1
#    IPv6:
#      - True
    # Recommended but not required (DHCP needs NET_ADMIN)
    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
    cap_add:
      - NET_ADMIN
    restart: unless-stopped


The primary dns server must be localhost. This script can be executed using
Code:
docker-compose up
with the script file residing in the same directory. The correct docker compose syntax for enabling IPv6 to test i've not figured out quite yet.
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 634
Location: Winnipeg, Canada

PostPosted: Mon Nov 11, 2019 7:57 pm    Post subject: Reply with quote

I did find this guide that could be useful reference perspective.

https://www.smarthomebeginner.com/run-pihole-in-docker-on-ubuntu-with-reverse-proxy/#Step_2b_PiHole_on_Docker_without_Reverse_Proxy
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Tue Nov 12, 2019 6:41 pm    Post subject: Reply with quote

Code:
 $docker-compose up
Creating pihole ... done
Attaching to pihole
pihole    | [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
pihole    | [s6-init] ensuring user provided files have correct perms...exited 0.
pihole    | [fix-attrs.d] applying ownership & permissions fixes...
pihole    | [fix-attrs.d] 01-resolver-resolv: applying...
pihole    | [fix-attrs.d] 01-resolver-resolv: exited 0.
pihole    | [fix-attrs.d] done.
pihole    | [cont-init.d] executing container initialization scripts...
pihole    | [cont-init.d] 20-start.sh: executing...
pihole    |  ::: Starting docker specific checks & setup for docker pihole/pihole
pihole    | WARNING Misconfigured DNS in /etc/resolv.conf: Two DNS servers are recommended, 127.0.0.1 and any backup server
pihole    | WARNING Misconfigured DNS in /etc/resolv.conf: Primary DNS should be 127.0.0.1 (found 127.0.0.11)
pihole    |
pihole    | nameserver 127.0.0.11
pihole    | options ndots:0
pihole    | Assigning random password: J9PJ6EZC
pihole    |   [i] Existing PHP installation detected : PHP version 7.0.33-0+deb9u5
pihole    |
pihole    |   [i] Installing configs from /etc/.pihole...
pihole    |   [i] Existing dnsmasq.conf found... it is not a Pi-hole file, leaving alone!
  [✓] Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf
pihole    | ::: Pre existing WEBPASSWORD found
pihole    | Using default DNS servers: 8.8.8.8 & 8.8.4.4
pihole    | DNSMasq binding to default interface: eth0
pihole    | Added ENV to php:
pihole    |                     "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log",
pihole    |                     "ServerIP" => "0.0.0.0",
pihole    |                     "VIRTUAL_HOST" => "0.0.0.0",
pihole    | Using IPv4 and IPv6
pihole    | ::: Preexisting ad list /etc/pihole/adlists.list detected ((exiting setup_blocklists early))
pihole    | https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
pihole    | https://mirror1.malwaredomains.com/files/justdomains
pihole    | http://sysctl.org/cameleon/hosts
pihole    | https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
pihole    | https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
pihole    | https://hosts-file.net/ad_servers.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/hostfile.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/easylist_host.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/easy_privacy_host.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/gambling-hosts.txt
pihole    | https://raw.githubusercontent.com/hoshsadiq/adblock-nocoin-list/master/hosts.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_host.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/Ad_filter_list_by_Disconnect.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/Peter_Lowe_ADS.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_crypto_host.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adguard_mobile_host.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/ads-and-tracking-extended.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/ads-and-tracking.txt
pihole    | https://raw.githubusercontent.com/MajkiIT/polish-ads-filter/master/polish-pihole-filters/adservers.txt
pihole    | https://www.tranzystor.pl/pliki/phishing.txt
pihole    | https://www.tranzystor.pl/pliki/malware.txt
pihole    | https://www.tranzystor.pl/pliki/black_list_porno.txt
pihole    | https://zeustracker.abuse.ch/blocklist.php?download=domainblocklist
pihole    | https://gitlab.com/ookangzheng/dbl-oisd-nl/raw/master/dbl.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/adaway.org/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/adblock-nocoin-list/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/adguard-simplified/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/anudeepnd-adservers/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-ad/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-malvertising/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-malware/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/disconnect.me-tracking/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/easylist/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/easyprivacy/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/eth-phishing-detect/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.2o7net/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.dead/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.risk/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/fademind-add.spam/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/kadhosts/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomainlist.com/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomains.com-immortaldomains/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/malwaredomains.com-justdomains/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/matomo.org-spammers/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/mitchellkrogza-badd-boyz-hosts/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/pgl.yoyo.org/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/ransomwaretracker.abuse.ch/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/someonewhocares.org/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/spam404.com/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/stevenblack/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/winhelp2002.mvps.org/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/zerodot1-coinblockerlists-browser/list.txt
pihole    | https://raw.githubusercontent.com/hectorm/hmirror/master/data/zeustracker.abuse.ch/list.txt
pihole    | https://raw.githubusercontent.com/CHEF-KOCH/Audio-fingerprint-pages/master/AudioFp.txt
pihole    | https://raw.githubusercontent.com/CHEF-KOCH/Canvas-fingerprinting-pages/master/Canvas.txt
pihole    | https://raw.githubusercontent.com/CHEF-KOCH/WebRTC-tracking/master/WebRTC.txt
pihole    | https://raw.githubusercontent.com/CHEF-KOCH/CKs-FilterList/master/Anti-Corp/hosts/NSABlocklist.txt
pihole    | https://gitlab.com/quidsup/notrack-blocklists/raw/master/notrack-blocklist.txt
pihole    | https://gitlab.com/quidsup/notrack-blocklists/raw/master/notrack-malware.txt
pihole    | https://www.stopforumspam.com/downloads/toxic_domains_whole.txt
pihole    | ::: Testing pihole-FTL DNS: FTL started!
pihole    | ::: Testing lighttpd config: Syntax OK
pihole    | ::: All config checks passed, cleared for startup ...
pihole    |  ::: Docker start setup complete
pihole    |   [i] Pi-hole blocking is enabled
pihole    |   [✗] DNS resolution is currently unavailable
  [✓] DNS resolution is now available
pihole    |
pihole    |   [i] Neutrino emissions detected...
  [✓] Pulling blocklist source list into range
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (hosts)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: mirror1.malwaredomains.com (justdomains)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: sysctl.org (hosts)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: s3.amazonaws.com (simple_tracking.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: s3.amazonaws.com (simple_ad.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: hosts-file.net (ad_servers.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (hostfile.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (easylist_host.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (easy_privacy_host.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (gambling-hosts.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (hosts.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (adguard_host.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (Ad_filter_list_by_Disconnect.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (Peter_Lowe_ADS.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (adguard_crypto_host.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (adguard_mobile_host.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (ads-and-tracking-extended.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (ads-and-tracking.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (adservers.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: www.tranzystor.pl (phishing.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: www.tranzystor.pl (malware.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: www.tranzystor.pl (black_list_porno.txt)
  [✓] Status: No changes detected
pihole    |
pihole    |   [i] Target: zeustracker.abuse.ch (blocklist.php?download=domainblocklist)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: gitlab.com (dbl.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (list.txt)
  [✓] Status: Retrieval successful
pihole    |   [i] Received empty file: using previously cached list
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (AudioFp.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (Canvas.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (WebRTC.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: raw.githubusercontent.com (NSABlocklist.txt)
  [✗] Status: Not found
pihole    |   [✗] List download failed: using previously cached list
pihole    |
pihole    |   [i] Target: gitlab.com (notrack-blocklist.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: gitlab.com (notrack-malware.txt)
  [✓] Status: Retrieval successful
pihole    |
pihole    |   [i] Target: www.stopforumspam.com (toxic_domains_whole.txt)
  [✓] Status: No changes detected
pihole    |
  [✓] Consolidating blocklists
  [✓] Extracting domains from blocklists
pihole    |   [i] Number of domains being pulled in by gravity: 2494363
  [✓] Removing duplicate domains
pihole    |   [i] Number of unique domains trapped in the Event Horizon: 1488019
  [i] Number of whitelisted domains: 67
pihole    |   [i] Number of blacklisted domains: 7
pihole    |   [i] Number of regex filters: 3
  [✓] Parsing domains into hosts format
  [✓] Cleaning up stray matter
pihole    |
pihole    |   [✓] DNS service is running
pihole    |   [✓] Pi-hole blocking is Enabled
pihole    | [cont-init.d] 20-start.sh: exited 0.
pihole    | [cont-init.d] done.
pihole    | [services.d] starting services
pihole    | Starting crond
pihole    | Starting pihole-FTL (no-daemon) as root
pihole    | Starting lighttpd
pihole    |
pihole    | Cannot make/remove an entry for the specified session
pihole    |
pihole    | Cannot make/remove an entry for the specified session
pihole    | [services.d] done.


Code:
 $ cat docker-compose.yml
version: "3"

# https://github.com/pi-hole/docker-pi-hole/blob/master/README.md

services:
  pihole:
    container_name: pihole
    image: pihole/pihole:latest
    # For DHCP it is recommended to remove these ports and instead add: network_mode: "host"
#    network_mode: "host"
    ports:
      - "53:53/tcp"
      - "53:53/udp"
      - "67:67/udp"
      - "980:80/tcp"
      - "9443:443/tcp"
    environment:
      TZ: 'Europe/Warsaw'
      # WEBPASSWORD: 'set a secure password here or it will be random'
    # Volumes store your data between container upgrades
    volumes:
       - './etc-pihole/:/etc/pihole/'
       - './etc-dnsmasq.d/:/etc/dnsmasq.d/'
    # run `touch ./var-log/pihole.log` first unless you like errors
    # - './var-log/pihole.log:/var/log/pihole.log'
    dns:
      - 127.0.0.1
      - 1.1.1.1
    # Recommended but not required (DHCP needs NET_ADMIN)
    #   https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
    cap_add:
      - NET_ADMIN
    restart: unless-stopped


Now the DNS server is running. Pihole turns on very slowly, downloads a list of blocked hosts every time it starts. The DHCP server is down.
Do you need to use a dhcp server outside the docker? So far this built-in DHCP in Pihole does not work.
Back to top
View user's profile Send private message
mustang01
n00b
n00b


Joined: 19 Aug 2019
Posts: 40

PostPosted: Sat Nov 16, 2019 12:16 pm    Post subject: Reply with quote

How to properly launch the docker and pihole container in autostart after restarting the system?
I tried the script https://github.com/0x17de/dockerservice-openrc and the docker start -a pihole command after rebooting from the file https://github.com/pi-hole/docker-pi-hole/blob/master/pihole.service but it didn't work.
Only the manual "docker-compose up" in "docker-compose down" command works.

It crashed. I turned off the docker and I'm using pihole on rpi4. I have reduced the list of blocked hosts.
Back to top
View user's profile Send private message
axl
l33t
l33t


Joined: 11 Oct 2002
Posts: 908
Location: Romania

PostPosted: Thu Dec 12, 2019 10:47 pm    Post subject: Reply with quote

Yeah. It's basically like 5-6 lists of blocked domains and a nice gui. it uses dnsmasq and lighttpd for these tasks. Shouldn't be too hard to port to gentoo. I ended up using a debian VM for it and i'm pretty happy with it.

Especially for mobile devices. Those pesky annoying ads that you see in both apple and android devices are just gone. Meanwhile it uses next to zero resources to block around 10-20% of all stuff which turns out to be ads.
Back to top
View user's profile Send private message
axl
l33t
l33t


Joined: 11 Oct 2002
Posts: 908
Location: Romania

PostPosted: Thu Dec 12, 2019 11:37 pm    Post subject: Reply with quote

adblock plus, I took a look at it; it's also a list. but not domains, but urls. and not only urls, even div ids and other stuff. pretty smart actually. short but powerful lists. in some sense, adblock plus operates as a text parser/filter. it sees some links/strings and basically neutralize them. turns them to nothing. that is, before the browser renders the page. same thing can or could theoretically be done with a web proxy. squid has a thing very similar. I don't know if you could use the same lists.

pihole on the other hand, operates as a dns server. it is a dns server. it doesn't host anything, no domains, but answers dns queries. also has lists, of domains where only ads are hosted. a query comes, if it's ads on the list, send to 127.0.0.1, if not, forward query to the real dns. that's all it does. doesn't sniff traffic, doesn't look at traffic. or content. if someone is bad, then pihole will say he is 127.0.0.1. if not... forward.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum