| View previous topic :: View next topic |
| Author |
Message |
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
 Posted: Thu May 23, 2019 10:10 pm Post subject: Problem with alsa-firmware [Solved] |
 |
|
Hello, today i have finished to install all of my system on my laptop, but i have seen ig problem. alsa-firmware package don't have hda-intel use flag for ALSA_CARDS global use flag ???
It's big problem, because i have no sound ...
Last edited by Fulgurance on Mon Aug 19, 2019 9:24 am; edited 1 time in total |
|
| Back to top |
|
 |
Banana
Veteran
Joined: 21 May 2004
Posts: 1382
Location: Germany
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Fri May 24, 2019 8:43 pm Post subject: |
|
|
Fulgurance,
Lack of firmware is probably not your problem.
What does | Code: | | cat /proc/asound/devices |
say and how are you expecting sound to work?
Analogue from the pale green front stereo jack socket or over a digital video link?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Sun May 26, 2019 9:51 am Post subject: |
|
|
I have thinking and i think i have found source on problem. Its license problem !
I have seen use flag for linux-firmware (unknow-license), but i dont have any success to enable it. (I have hda-intel sound card)
I have changed default license use flag, but again this use flag is masked...
i have set:
ACCEPT_LICENSE=* -@EULA |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Sun May 26, 2019 10:10 am Post subject: |
|
|
Fulgurance,
Tell us your problem not your proposed solution.
By way of describing your problem, provide the information your helpers have requested.
| Code: | | ACCEPT_LICENSE=* -@EULA |
is missing the quotes.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Sun May 26, 2019 10:22 am Post subject: |
|
|
| I have just missing quote because i write with my phone. Just wait, i emerge Firefox. When i have finished, i post Emerge info |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Sun May 26, 2019 10:35 am Post subject: |
|
|
Fulgurance,
and the other things too please.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Mon May 27, 2019 12:10 am Post subject: |
|
|
If you can help me !
I think problem is with new license system. linux-firmware have new license use flag and i don't have success to enable it.
Look:
Emerge info:
| Code: | fulgurance@msi-gs73vr-6rf ~ $ emerge --info
Portage 2.3.66 (python 3.6.8-final-0, default/linux/amd64/17.0/hardened/selinux, gcc-9.1.0, glibc-2.29-r2, 5.1.4-gentoo x86_64)
=================================================================
System uname: Linux-5.1.4-gentoo-x86_64-Intel-R-_Core-TM-_i7-6700HQ_CPU_@_2.60GHz-with-gentoo-2.6
KiB Mem: 16305432 total, 10874584 free
KiB Swap: 20971516 total, 20971516 free
Timestamp of repository gentoo: Fri, 24 May 2019 21:30:01 +0000
Head commit of repository gentoo: d430fbc0a7c8b6e2e87e77b88f2af77ff980b0d2
sh bash 5.0_p7
ld GNU ld (Gentoo 2.32 p2) 2.32.0
app-shells/bash: 5.0_p7::gentoo
dev-lang/perl: 5.30.0::gentoo
dev-lang/python: 2.7.16::gentoo, 3.6.8::gentoo
dev-util/cmake: 3.14.4::gentoo
sys-apps/baselayout: 2.6-r1::gentoo
sys-apps/openrc: 0.41.2::gentoo
sys-apps/sandbox: 2.17::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r4::gentoo
sys-devel/automake: 1.16.1-r1::gentoo
sys-devel/binutils: 2.32-r1::gentoo
sys-devel/gcc: 9.1.0::gentoo
sys-devel/gcc-config: 2.0::gentoo
sys-devel/libtool: 2.4.6-r5::gentoo
sys-devel/make: 4.2.1-r4::gentoo
sys-kernel/linux-headers: 5.0-r1::gentoo (virtual/os-headers)
sys-libs/glibc: 2.29-r2::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-max-age: 24
sync-rsync-verify-metamanifest: yes
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
fulgurance-overlay
location: /var/lib/layman/fulgurance-overlay
sync-type: laymansync
sync-uri: https://github.com/Fulgurance/Gentoo-Overlay.git
masters: gentoo
priority: 50
ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=skylake -O2 -pipe -mmovbe -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -mpopcnt -mavx -mavx2 -maes -mpclmul -mfsgsbase -mrdrnd -mfma -mbmi -mbmi2 -mf16c -mrdseed -madx -mprefetchwt1 -mclflushopt -mxsavec -mxsaves"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=skylake -O2 -pipe -mmovbe -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -mpopcnt -mavx -mavx2 -maes -mpclmul -mfsgsbase -mrdrnd -mfma -mbmi -mbmi2 -mf16c -mrdseed -madx -mprefetchwt1 -mclflushopt -mxsavec -mxsaves"
DISTDIR="/usr/portage/distfiles"
ENV_UNSET="DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-march=skylake -O2 -pipe -mmovbe -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -mpopcnt -mavx -mavx2 -maes -mpclmul -mfsgsbase -mrdrnd -mfma -mbmi -mbmi2 -mf16c -mrdseed -madx -mprefetchwt1 -mclflushopt -mxsavec -mxsaves"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs candy config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch preserve-libs protect-owned sandbox selinux sesandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=skylake -O2 -pipe -mmovbe -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -mpopcnt -mavx -mavx2 -maes -mpclmul -mfsgsbase -mrdrnd -mfma -mbmi -mbmi2 -mf16c -mrdseed -madx -mprefetchwt1 -mclflushopt -mxsavec -mxsaves"
GENTOO_MIRRORS="http://ftp.free.fr/mirrors/ftp.gentoo.org/ ftp://ftp.free.fr/mirrors/ftp.gentoo.org/ http://gentoo.modulix.net/gentoo/ http://gentoo.mirrors.ovh.net/gentoo-distfiles/ ftp://mirrors.soeasyto.com/distfiles.gentoo.org/ http://mirrors.soeasyto.com/distfiles.gentoo.org/ https://mirrors.soeasyto.com/distfiles.gentoo.org/"
LANG="fr_FR.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="fr fr_FR"
MAKEOPTS="-j9"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X acl acpi alsa amd64 bzip2 compat crypt cryptsetup custom-cflags custom-optimization cxx dbus device-mapper dhcpcd dri dri3 elogind experimental git glamor gstreamer hardened iconv initramfs ipv6 jpeg kde libtirpc lvm mp3 mp4 multilib ncurses networkmanager nls nptl ogg open_perms opengl openmp pam pcre peer_perms phonon pie png policykit pulseaudio readline seccomp selinux semantic-desktop ssl ssp tiff ubac udev udisks unconfined unicode vorbis vulkan wayland wifi wireless xattr xtpax zlib" ABI_X86="64" ALSA_CARDS="hda-intel" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 f16c fma3 mmx mmxext pclmul popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64" INPUT_DEVICES="libinput keyboard mouse" KERNEL="linux" L10N="fr fr-FR" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" NETBEANS_MODULES="apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6 php7-1" POSTGRES_TARGETS="postgres9_5 postgres10" PYTHON_SINGLE_TARGET="python3_6" PYTHON_TARGETS="python2_7 python3_6" RUBY_TARGETS="ruby24" USERLAND="GNU" VIDEO_CARDS="intel i965 nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
|
Linux firmware use flags:
| Code: | fulgurance@msi-gs73vr-6rf ~ $ eix linux-firmware
[I] sys-kernel/linux-firmware
Available versions: 20190502^bs 20190514^bsd **99999999^bsd {+redistributable savedconfig unknown-license}
Installed versions: 20190514^bs(22:31:46 25/05/2019)(redistributable -savedconfig -unknown-license)
Homepage: https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git
Description: Linux firmware files |
Lspci:
| Code: | fulgurance@msi-gs73vr-6rf ~ $ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)
00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
00:1d.5 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #14 (rev f1)
00:1d.6 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation HM170 Chipset LPC/eSPI Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev ff)
3c:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
3d:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
3e:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) |
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 12:23 am Post subject: |
|
|
Fulgurance,
| Code: | | 00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31) |
It that needs firmware, its the first snd-hda-intel divice I've met that does.
You only appear to have a single sound card there but lets not assume anything.
Please post the output of | Code: | | cat /proc/asound/devices |
It shows all the devices on all your sound cards.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Mon May 27, 2019 12:33 am Post subject: |
|
|
It's strange, it's the first time i have this problem...
| Code: | fulgurance@msi-gs73vr-6rf ~ $ cat /proc/asound/devices
1: : sequencer
2: [ 0- 0]: digital audio playback
3: [ 0- 0]: digital audio capture
4: [ 0- 1]: digital audio playback
5: [ 0- 3]: digital audio playback
6: [ 0- 7]: digital audio playback
7: [ 0- 8]: digital audio playback
8: [ 0- 9]: digital audio playback
9: [ 0-10]: digital audio playback
10: [ 0- 0]: hardware dependent
11: [ 0- 2]: hardware dependent
12: [ 0] : control
33: : timer
|
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 12:37 am Post subject: |
|
|
Fulgurance,
That looks good. One soundcard.
What does alsamixer show?
You can paste the text screen between code tags.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 12:48 am Post subject: |
|
|
Fulgurance,
Your sound card can do digital audio or analogue audio but only one at a time.
When both are enabled digital wins.
Mute all the controls with S/PDIF or IEC in their names.
Your screen shot shows two enabled and there may be more if you scroll to the right in alsomixer.
Just now your sound is going to the digital output.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Mon May 27, 2019 12:01 pm Post subject: |
|
|
Sorry, i haven't finished to configure my sound before i post this informations. I have again no sound.
This is my alsa configuration for pulseaudio:
/etc/alsa/conf.d/50-pulseaudio.conf
| Code: | # Add a specific named PulseAudio pcm and ctl (typically useful for testing)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
} |
And my alsamixer screenshot (look "Sortie Factice") : http://zupimages.net/viewer.php?id=19/22/hrl1.png
Nobody have any idea for new linux-firmware use flag? I'm sure source of problem is this. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 12:11 pm Post subject: |
|
|
Fulgurance,
pulseaudio is a wrapper around alsa.
I'm not a pulseaudio user but until alsa can make sounds, pulse won't work either.
Did you mute all the digital outputs?
-- edit --
The screen shot background, behind alsamixer, with the heading "Configurer le volume audio" shows that sound is muted.
Look at the icon above the 100% at the end of the slider.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 4:17 pm Post subject: |
|
|
Fulgurance,
Your | Code: | | /proc/asound/devices |
shows your kernel is good.
All the expected sound devices are there.
Until you installed pulseaudo, the only thing wrong in alsamixer was the digital interfaces being unmuted.
With pulse on top of Alsa, I'm out of ideas except your GUI shows that sound output is muted.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 7:52 pm Post subject: |
|
|
Fulgurance,
| Code: | ┌────────────────────────────── AlsaMixer v1.1.9 ──────────────────────────────┐
│ Card: HDA ATI SB F1: Help │
│ Chip: VIA VT1708S F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Master [dB gain: 0.00] Esc: Exit │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ →
│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ┌──┐ └──┘ ├──┤ ├──┤ └──┘ ├──┤ ├──┤ │
│ │OO│ │OO│ │OO│ │MM│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 100 100<>100 100<>100 0<>0 21<>21 100<>100 100 │
│ < Master >Headphon PCM Front Front Mi Front Mi Surround Center │
└──────────────────────────────────────────────────────────────────────────────┘ |
There are more controls than you show in your image.
That's what the column of → mean on the right of the the window.
Do you have more controls to mute there?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Mon May 27, 2019 8:12 pm Post subject: |
|
|
Yes, i know alsamixer.
| Code: | ┌──────────────────────────────────────── AlsaMixer v1.1.9 ─────────────────────────────────────────┐
│ Carte: HDA Intel PCH F1: Aide │
│ Puce: Realtek ALC898 F2: Informations Système │
│ Vue: F3:[Lecture] F4: Capture F5: Tout F6: Choisir la carte son │
│ Contrôle: Loopback Mixing [Disabled] Esc: Quitter │
│ │
│ │
│ ┌──┐ ┌──┐ │
│ │ │ │ │ │
│ │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
← │ │ │ │ │
│ │ │ │ │ │
│ │ │ │ │ │
│ │ │ │ │ │
│ ├──┤ └──┘ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ Disabled │
│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 0<>0 0<>0 │
│ Mic Mic Boos S/PDIF S/PDIF D S/PDIF 1 S/PDIF 2 S/PDIF 3 S/PDIF 4 S/PDIF 1<Loopback> │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────┘ |
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Mon May 27, 2019 8:49 pm Post subject: |
|
|
Fulgurance,
You may need to pass the model= module parameter when snd_hda_intel loads.
There is a list in /usr/src/linux/Documentation/sound/hd-audio/models.rst starting at line 332, in my kernel anyway.
Many of them will not apply to you. Its a process of trial and error.
| Code: | modprobe -r snd_hda_intel
modprobe snd_hda_intel model=<next_on_list> |
Test sound.
Repeat until you find one that works.
Once you have your model, the boot process can apply it.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Fulgurance
Veteran
Joined: 15 Feb 2017
Posts: 1198
|
| Posted: Tue Jun 04, 2019 11:01 am Post subject: |
|
|
Hello, sorry for waiting time.
I have looking documentation you asked me.
But, it's strange, i don't found my module... It's very strange, because in many installations in past, my sound work immediatly...
Look that:
| Code: | zohran@msi-gs73vr-6rf ~ $ cat /proc/
Display all 272 possibilities? (y or n)
zohran@msi-gs73vr-6rf ~ $ cat /proc/asound/pcm
00-00: ALC898 Analog : ALC898 Analog : playback 1 : capture 1
00-01: ALC898 Digital : ALC898 Digital : playback 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
00-09: HDMI 3 : HDMI 3 : playback 1
00-10: HDMI 4 : HDMI 4 : playback 1
zohran@msi-gs73vr-6rf ~ $ sudo updatedb
Mot de passe :
zohran@msi-gs73vr-6rf ~ $ locate sdn-hda-intel
zohran@msi-gs73vr-6rf ~ $ locate sdn_hda_intel
zohran@msi-gs73vr-6rf ~ $ |
If you look, there are no hda intel modules found ... and when i look your documentation on /usr/src/linux/Documentation/sound/hd-audio/models.rst, i found section with my device name, but there isn't model name... I look bad?
| Code: | ALC88x/898/1150/1220
====================
abit-aw9d
Pin fixups for Abit AW9D-MAX
lenovo-y530
Pin fixups for Lenovo Y530
acer-aspire-7736
Fixup for Acer Aspire 7736
asus-w90v
Pin fixup for ASUS W90V
cd
Enable audio CD pin NID 0x1c
no-front-hp
Disable front HP pin NID 0x1b
vaio-tt
Pin fixup for VAIO TT
eee1601
COEF setups for ASUS Eee 1601
alc882-eapd
Change EAPD COEF mode on ALC882
alc883-eapd
Change EAPD COEF mode on ALC883
gpio1
Enable GPIO1
gpio2
Enable GPIO2
gpio3
Enable GPIO3
alc889-coef
Setup ALC889 COEF
asus-w2jc
Fixups for ASUS W2JC
acer-aspire-4930g
Acer Aspire 4930G/5930G/6530G/6930G/7730G
acer-aspire-8930g
Acer Aspire 8330G/6935G
acer-aspire
Acer Aspire others
macpro-gpio
GPIO setup for Mac Pro
dac-route
Workaround for DAC routing on Acer Aspire
mbp-vref
Vref setup for Macbook Pro
imac91-vref
Vref setup for iMac 9,1
mba11-vref
Vref setup for MacBook Air 1,1
mba21-vref
Vref setup for MacBook Air 2,1
mp11-vref
Vref setup for Mac Pro 1,1
mp41-vref
Vref setup for Mac Pro 4,1
inv-dmic
Inverted internal mic workaround
no-primary-hp
VAIO Z/VGC-LN51JGB workaround (for fixed speaker DAC)
asus-bass
Bass speaker setup for ASUS ET2700
dual-codecs
ALC1220 dual codecs for Gaming mobos
clevo-p950
Fixups for Clevo P950 |
| Code: | [ 1.485727] No soundcards found.
[ 1.510674] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 1.510709] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 1.510738] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 1.510765] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 1.510793] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 1.510825] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 |
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Tue Jun 04, 2019 11:30 am Post subject: |
|
|
Fulgurance,
The model parameter is related to how the codec operates.
Its codec specific, not sound card specific.
You have a ALC898 codec.
If sdn-hda-intel is compiled into the kernel, with <*>, it will not appear as a module.
There may be a sdn-hda-intel.o file in the kernel tree though.
Even if your specific system is not mentioned, it may be the same as one that is.
That's trial and error as we don't know which one.
| Code: | | [ 1.485727] No soundcards found. |
is still a worry.
I don't understand how alsamixer shows controls and dmesg says "No soundcards found.".
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Anon-E-moose
Watchman
Joined: 23 May 2008
Posts: 6097
Location: Dallas area
|
| Posted: Tue Jun 04, 2019 11:56 am Post subject: |
|
|
paste you .config file, something is not configure properly
_________________
PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
|
Desktop Environments
