| View previous topic :: View next topic |
| Author |
Message |
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
 Posted: Sun Jan 13, 2019 5:42 am Post subject: emerge -auvDN @world error |
 |
|
emerge -auvDN @world
| Code: |
--- Invalid atom in /etc/portage/package.mask: dev-libs/openssl-1.1.1a-r1
* IMPORTANT: 18 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
* sections of the emerge man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.2q:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl:0/0=[abi_x86_64(-)] required by (app-arch/libarchive-3.3.3:0/13::gentoo, installed)
^^^^^
<dev-libs/openssl-1.1:0= required by (dev-lang/ruby-2.3.8-r1:2.3/2.3::gentoo, ebuild scheduled for merge)
^ ^^^^^^
(and 6 more with the same problems)
(dev-libs/openssl-1.1.1a-r1:0/1.1::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl:0/1.1= required by (dev-lang/ruby-2.4.5-r1:2.4/2.4::gentoo, installed)
^^^^^^^
(and 8 more with the same problem)
dev-ruby/rex-arch:0
(dev-ruby/rex-arch-0.1.13:0/0::pentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-ruby/rex-arch-0.1.13:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-ruby/rex-arch[ruby_targets_ruby25] required by (dev-ruby/rex-exploitation-0.1.20:0/0::gentoo, ebuild scheduled for merge)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-arch[ruby_targets_ruby25] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-arch[ruby_targets_ruby25] required by (dev-ruby/rex-nop-0.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following packages are causing rebuilds:
(dev-lang/perl-5.28.0:0/5.28::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-perl/Net-DBus-1.1.0:0/0::gentoo, ebuild scheduled for merge)
(app-text/po4a-0.54:0/0::gentoo, ebuild scheduled for merge)
(dev-vcs/git-2.20.1:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/texinfo-6.5:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/Locale-gettext-1.70.0:0/0::gentoo, ebuild scheduled for merge)
(dev-perl/File-MimeInfo-0.280.0:0/0::gentoo, ebuild scheduled for merge)
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by net-misc/openssh-7.9_p1-r1::gentoo
# required by app-crypt/seahorse-3.20.0::gentoo
# required by @selected
# required by @world (argument)
# /usr/portage/profiles/package.mask:
# Lars Wendler <polynomial-c@gentoo.org> (28 Dec 2018)
# Masked while being tested and reverse deps aren't fully compatible
=dev-libs/openssl-1.1.1a-r1
NOTE: The --autounmask-keep-masks option will prevent emerge
from creating package.unmask or ** keyword changes.
Would you like to add these changes to your config files? [Yes/No]
|
|
|
| Back to top |
|
 |
russK
l33t
Joined: 27 Jun 2006
Posts: 665
|
| Posted: Sun Jan 13, 2019 6:28 am Post subject: |
|
|
Were you trying to mask this package?: dev-libs/openssl-1.1.1a-r1
You need an '=' sign in front of the package, if you want to specify an exact version number to mask. That's why it says "Invalid atom".
HTH |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Sun Jan 13, 2019 8:25 am Post subject: |
|
|
If you are in a unstable system you should remove rub23 because is incompatible with openssl.
Is strange that you have yet ruby23 because is removed a few days ago from RUBY_TARGETS, check if you have some entries in package.use
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Sun Jan 13, 2019 11:14 am Post subject: |
|
|
| fedeliallalinea wrote: | If you are in a unstable system you should remove rub23 because is incompatible with openssl.
Is strange that you have yet ruby23 because is removed a few days ago from RUBY_TARGETS, check if you have some entries in package.use |
| Code: |
Total: 182 packages (112 upgrades, 3 new, 2 in new slots, 65 reinstalls), Size of downloads: 3,254 KiB
WARNING: One or more updates/rebuilds have been skipped due to a dependency conflict:
virtual/rubygems:0
(virtual/rubygems-15:0/0::gentoo, ebuild scheduled for merge) conflicts with
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-nop-0.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-text-0.2.21:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/metasm-1.0.2-r4:1.0.2/1.0.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-struct2-0.1.2:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-core-0.1.13:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/jsobfu-0.4.2:0.4.2/0.4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rkelly-remix-0.0.7:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rubygems:0
(dev-ruby/rubygems-3.0.1:0/0::gentoo, ebuild scheduled for merge) conflicts with
>=dev-ruby/rubygems-2.5.1[ruby_targets_ruby23] required by (virtual/rubygems-15:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-text:0
(dev-ruby/rex-text-0.2.21:0/0::gentoo, ebuild scheduled for merge) conflicts with
dev-ruby/rex-text[ruby_targets_ruby23] required by (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-text[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-text[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-struct2:0
(dev-ruby/rex-struct2-0.1.2:0/0::gentoo, ebuild scheduled for merge) conflicts with
dev-ruby/rex-struct2[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rex-core:0
(dev-ruby/rex-core-0.1.13:0/0::gentoo, ebuild scheduled for merge) conflicts with
dev-ruby/rex-core[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/metasm:1.0.2
(dev-ruby/metasm-1.0.2-r4:1.0.2/1.0.2::gentoo, ebuild scheduled for merge) conflicts with
dev-ruby/metasm:*[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/metasm:*[ruby_targets_ruby23] required by (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/metasm:*[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/jsobfu:0.4.2
(dev-ruby/jsobfu-0.4.2:0.4.2/0.4.2::gentoo, ebuild scheduled for merge) conflicts with
dev-ruby/jsobfu:*[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
dev-ruby/rkelly-remix:0
(dev-ruby/rkelly-remix-0.0.7:0/0::gentoo, ebuild scheduled for merge) conflicts with
>=dev-ruby/rkelly-remix-0.0.6:0[ruby_targets_ruby23] required by (dev-ruby/jsobfu-0.4.2:0.4.2/0.4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
!!! All ebuilds that could satisfy "dev-lang/ruby:2.3" have been masked.
!!! One of the following masked packages is required to complete your request:
- dev-lang/ruby-2.3.8-r1::gentoo (masked by: )
(dependency required by "dev-ruby/rkelly-remix-0.0.7::gentoo[ruby_targets_ruby23]" [installed])
(dependency required by "dev-ruby/jsobfu-0.4.2::gentoo[ruby_targets_ruby23]" [installed])
(dependency required by "dev-ruby/rex-exploitation-0.1.19::gentoo[ruby_targets_ruby23]" [installed])
(dependency required by "net-analyzer/metasploit-4.17.21-r4::gentoo[ruby_targets_ruby24]" [installed])
(dependency required by "@selected" [set])
(dependency required by "@world" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
* emerge --keep-going: dev-ruby/rex-nop-0.1.1 dropped because it requires
* dev-ruby/rex-arch[ruby_targets_ruby25]
* emerge --keep-going: dev-ruby/rex-encoder-0.1.4 dropped because it requires
* dev-ruby/rex-arch[ruby_targets_ruby25]
* emerge --keep-going: dev-ruby/rex-bin_tools-0.1.6 dropped because it
* requires dev-ruby/rex-arch[ruby_targets_ruby25]
* emerge --keep-going: dev-ruby/rex-exploitation-0.1.20 dropped because it
* requires dev-ruby/rex-arch[ruby_targets_ruby25]
>>> Emerging (1 of 182) net-analyzer/scapy-2.4.0_p20181231::pentoo
* Fetching files in the background.
* To view fetch progress, run in another terminal:
* tail -f /var/log/emerge-fetch.log
>>> Downloading 'http://mirrors.tuna.tsinghua.edu.cn/gentoo/distfiles/scapy-2.4.0_p20181231.tar.gz'
--2019-01-13 19:11:35-- http://mirrors.tuna.tsinghua.edu.cn/gentoo/distfiles/scapy-2.4.0_p20181231.tar.gz
Resolving mirrors.tuna.tsinghua.edu.cn... 101.6.8.193, 2402:f000:1:408:8100::1
Connecting to mirrors.tuna.tsinghua.edu.cn|101.6.8.193|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2019-01-13 19:11:36 ERROR 404: Not Found.
>>> Downloading 'https://github.com/secdev/scapy/archive/4d5ddaf55e9a0c5336f95ef45836d0b570a95396.tar.gz'
--2019-01-13 19:11:36-- https://github.com/secdev/scapy/archive/4d5ddaf55e9a0c5336f95ef45836d0b570a95396.tar.gz
Resolving github.com... 13.229.188.59, 52.74.223.119, 13.250.177.223
Connecting to github.com|13.229.188.59|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/secdev/scapy/tar.gz/4d5ddaf55e9a0c5336f95ef45836d0b570a95396 [following]
--2019-01-13 19:11:37-- https://codeload.github.com/secdev/scapy/tar.gz/4d5ddaf55e9a0c5336f95ef45836d0b570a95396
Resolving codeload.github.com... 13.250.162.133, 54.251.140.56, 13.229.189.0
Connecting to codeload.github.com|13.250.162.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘/usr/portage/distfiles/scapy-2.4.0_p20181231.tar.gz’
/usr/portage/distfi [ <=> ] 3.18M 743KB/s in 4.7s
2019-01-13 19:11:42 (699 KB/s) - ‘/usr/portage/distfiles/scapy-2.4.0_p20181231.tar.gz’ saved [3331241]
!!! Fetched file: scapy-2.4.0_p20181231.tar.gz VERIFY FAILED!
!!! Reason: Filesize does not match recorded size
!!! Got: 3331241
!!! Expected: 3331244
Refetching... File renamed to '/usr/portage/distfiles/scapy-2.4.0_p20181231.tar.gz._checksum_failure_.pow5txe_'
!!! Couldn't download 'scapy-2.4.0_p20181231.tar.gz'. Aborting.
* Fetch failed for 'net-analyzer/scapy-2.4.0_p20181231', Log file:
* '/var/tmp/portage/net-analyzer/scapy-2.4.0_p20181231/temp/build.log'
>>> Failed to emerge net-analyzer/scapy-2.4.0_p20181231, Log file:
>>> '/var/tmp/portage/net-analyzer/scapy-2.4.0_p20181231/temp/build.log'
*** Resuming merge...
These are the packages that would be merged, in order:
Calculating dependencies... done!
* Messages for package sys-apps/systemd-240-r3:
* It's recommended to set an empty value to the following kernel config option:
* CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
* CONFIG_CGROUP_BPF: is not set when it should be.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package app-misc/mc-4.8.22:
* "unicode" USE flag only takes effect when the "slang" USE flag is disabled.
* Messages for package media-sound/pulseaudio-12.2:
* A preallocated buffer-size of 2048 (kB) or higher is recommended for the HD-audio driver!
* CONFIG_SND_HDA_PREALLOC_SIZE=64
* Messages for package app-crypt/johntheripper-1.7.9-r11:
* ERROR: app-crypt/johntheripper-1.7.9-r11::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=app-crypt/johntheripper-1.7.9-r11::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-crypt/johntheripper-1.7.9-r11::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-crypt/johntheripper-1.7.9-r11/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-crypt/johntheripper-1.7.9-r11/temp/environment'.
* Working directory: '/var/tmp/portage/app-crypt/johntheripper-1.7.9-r11/work/john-1.7.9'
* S: '/var/tmp/portage/app-crypt/johntheripper-1.7.9-r11/work/john-1.7.9'
* Messages for package dev-ruby/rex-nop-0.1.1:
* emerge --keep-going: dev-ruby/rex-nop-0.1.1 dropped because it requires
* dev-ruby/rex-arch[ruby_targets_ruby25]
* Messages for package dev-ruby/rex-encoder-0.1.4:
* emerge --keep-going: dev-ruby/rex-encoder-0.1.4 dropped because it requires
* dev-ruby/rex-arch[ruby_targets_ruby25]
* Messages for package dev-ruby/rex-bin_tools-0.1.6:
* emerge --keep-going: dev-ruby/rex-bin_tools-0.1.6 dropped because it
* requires dev-ruby/rex-arch[ruby_targets_ruby25]
* Messages for package dev-ruby/rex-exploitation-0.1.20:
* emerge --keep-going: dev-ruby/rex-exploitation-0.1.20 dropped because it
* requires dev-ruby/rex-arch[ruby_targets_ruby25]
* Messages for package net-analyzer/scapy-2.4.0_p20181231:
* Fetch failed for 'net-analyzer/scapy-2.4.0_p20181231', Log file:
* '/var/tmp/portage/net-analyzer/scapy-2.4.0_p20181231/temp/build.log'
* One or more packages are either masked or have missing dependencies:
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/rex-text-0.2.21:0/0::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (virtual/rubygems-15:0/0::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/rubygems-3.0.1:0/0::gentoo, installed)
*
* The resume list contains packages that are either masked or have
* unsatisfied dependencies. Please restart/continue the operation
* manually, or use --skipfirst to skip the first package in the list and
* any other packages that may be masked or have missing dependencies.
*
* The following 6 packages have failed to build, install, or execute
* postinst:
*
* (app-crypt/johntheripper-1.7.9-r11:0/0::gentoo, ebuild scheduled for merge), Log file:
* '/var/tmp/portage/app-crypt/johntheripper-1.7.9-r11/temp/build.log'
* (dev-ruby/rex-nop-0.1.1:0/0::gentoo, ebuild scheduled for merge)
* (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, ebuild scheduled for merge)
* (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, ebuild scheduled for merge)
* (dev-ruby/rex-exploitation-0.1.20:0/0::gentoo, ebuild scheduled for merge)
* (net-analyzer/scapy-2.4.0_p20181231:0/0::pentoo, ebuild scheduled for merge), Log file:
* '/var/tmp/portage/net-analyzer/scapy-2.4.0_p20181231/temp/build.log'
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Sun Jan 13, 2019 11:26 am Post subject: |
|
|
What return command emerge -UD --with-bdeps y @world?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Sun Jan 13, 2019 11:27 am Post subject: |
|
|
| fedeliallalinea wrote: | If you are in a unstable system you should remove rub23 because is incompatible with openssl.
Is strange that you have yet ruby23 because is removed a few days ago from RUBY_TARGETS, check if you have some entries in package.use |
| Code: |
-av virtual/rubygems
* IMPORTANT: 19 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
* sections of the emerge man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] virtual/rubygems-15::gentoo RUBY_TARGETS="ruby24 ruby25 ruby26 -ruby23*" 0 KiB
Total: 1 package (1 reinstall), Size of downloads: 0 KiB
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
virtual/rubygems:0
(virtual/rubygems-15:0/0::gentoo, ebuild scheduled for merge) pulled in by
virtual/rubygems (Argument)
(virtual/rubygems-15:0/0::gentoo, installed) pulled in by
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-core-0.1.13:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/postgres_ext-3.0.1:3/3::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/arel-helpers-2.8.0:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rdoc-6.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rake-12.3.2:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/openvas-omp-0.0.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/json-2.1.0-r1:2/2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/railties-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rkelly-remix-0.0.7:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/pg-0.21.0:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/jsobfu-0.4.2:0.4.2/0.4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/pg_array_parser-0.0.9-r2:0.0.9/0.0.9::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/net-telnet-0.2.0:1/1::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/test-unit-3.2.9:2/2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rjb-1.5.5:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/metasm-1.0.2-r4:1.0.2/1.0.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/bundler-1.17.3:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/activerecord-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-text-0.2.21:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionpack-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-struct2-0.1.2:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/power_assert-1.1.3:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/packetfu-1.1.13:1.1.13/1.1.13::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-nop-0.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionview-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/minitest-5.11.3:5/5::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionpack-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/activerecord-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/railties-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionview-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
It might be possible to solve this slot collision
by applying all of the following changes:
- virtual/rubygems-15 (Change USE: +ruby_targets_ruby23)
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Sun Jan 13, 2019 11:32 am Post subject: |
|
|
You have some ruby23 in package.use?
| Code: | | $ grep -r ruby23 /etc/portage/package.use* |
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Sun Jan 13, 2019 1:07 pm Post subject: |
|
|
| fedeliallalinea wrote: | You have some ruby23 in package.use?
| Code: | | $ grep -r ruby23 /etc/portage/package.use* |
|
grep ruby23 /etc/portage/package.use/*
no ruby23
| Code: |
equery u virtual/rubygems
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for virtual/rubygems-15:
U I
- + ruby_targets_ruby23 : Build with MRI Ruby 2.3.x
+ + ruby_targets_ruby24 : Build with MRI Ruby 2.4.x
+ + ruby_targets_ruby25 : Build with MRI Ruby 2.5.x
+ + ruby_targets_ruby26 : Build with MRI Ruby 2.6.x
|
| Code: |
emerge -av virtual/rubygems
* IMPORTANT: 11 config files in '/etc/portage' need updating.
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
* sections of the emerge man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] virtual/rubygems-15::gentoo RUBY_TARGETS="ruby24 ruby25 ruby26 -ruby23*" 0 KiB
Total: 1 package (1 reinstall), Size of downloads: 0 KiB
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
virtual/rubygems:0
(virtual/rubygems-15:0/0::gentoo, ebuild scheduled for merge) pulled in by
virtual/rubygems (Argument)
(virtual/rubygems-15:0/0::gentoo, installed) pulled in by
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-nop-0.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-exploitation-0.1.19:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-encoder-0.1.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/openvas-omp-0.0.4:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/net-telnet-0.2.0:1/1::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-text-0.2.21:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/railties-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/json-2.1.0-r1:2/2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/metasm-1.0.2-r4:1.0.2/1.0.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-bin_tools-0.1.6:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-struct2-0.1.2:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rjb-1.5.5:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/test-unit-3.2.9:2/2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/activerecord-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/minitest-5.11.3:5/5::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rkelly-remix-0.0.7:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/railties-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/arel-helpers-2.8.0:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/jsobfu-0.4.2:0.4.2/0.4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/pg_array_parser-0.0.9-r2:0.0.9/0.0.9::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/power_assert-1.1.3:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rdoc-6.1.1:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/activerecord-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionpack-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionview-4.2.11:4.2/4.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/pg-0.21.0:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rex-core-0.1.13:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionview-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/packetfu-1.1.13:1.1.13/1.1.13::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/postgres_ext-3.0.1:3/3::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/bundler-1.17.3:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/rake-12.3.2:0/0::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
virtual/rubygems[ruby_targets_ruby23] required by (dev-ruby/actionpack-5.2.2:5.2/5.2::gentoo, installed)
^^^^^^^^^^^^^^^^^^^
It might be possible to solve this slot collision
by applying all of the following changes:
- virtual/rubygems-15 (Change USE: +ruby_targets_ruby23)
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
|
| Back to top |
|
|
asturm
Developer
Joined: 05 Apr 2007
Posts: 8936
|
| Posted: Sun Jan 13, 2019 1:16 pm Post subject: |
|
|
as fedeliallalinea said.
This command is pointless:
| Code: | | emerge -av virtual/rubygems |
It can not possibly succeed as long as you have packages depending on the ruby23 implementation installed. Only a full world upgrade can do it. |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Sun Jan 13, 2019 1:25 pm Post subject: |
|
|
/etc/portage/make.conf
ADD -ruby23
| Code: |
> equery u virtual/rubygems
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for virtual/rubygems-15:
U I
- + ruby_targets_ruby23 : Build with MRI Ruby 2.3.x
+ + ruby_targets_ruby24 : Build with MRI Ruby 2.4.x
+ + ruby_targets_ruby25 : Build with MRI Ruby 2.5.x
+ + ruby_targets_ruby26 : Build with MRI Ruby 2.6.x
|
emerge -C virtual/rubygems
emerge -av virtual/rubygems
| Code: |
> equery u virtual/rubygems
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for virtual/rubygems-15:
U I
- - ruby_targets_ruby23 : Build with MRI Ruby 2.3.x
+ + ruby_targets_ruby24 : Build with MRI Ruby 2.4.x
+ + ruby_targets_ruby25 : Build with MRI Ruby 2.5.x
|
Solved the problem of ruby23
emerge -auvDN @world
| Code: |
Total: 172 packages (113 upgrades, 3 downgrades, 3 new, 2 in new slots, 51 reinstalls), Size of downloads: 3,254 KiB
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-lang/perl:0
(dev-lang/perl-5.28.0:0/5.28::gentoo, installed) pulled in by
=dev-lang/perl-5.28* required by (virtual/perl-IO-Compress-2.74.0-r1:0/0::gentoo, installed)
^ ^^^^^
dev-lang/perl:0/5.28= required by (dev-perl/Text-Unidecode-1.300.0:0/0::gentoo, installed)
^^^^^^^^
(and 137 more with the same problems)
(dev-lang/perl-5.26.2:0/5.26::gentoo, ebuild scheduled for merge) pulled in by
dev-lang/perl:0/5.26= required by (sys-apps/texinfo-6.5:0/0::gentoo, installed)
^^^^^^^^
(and 4 more with the same problem)
dev-libs/openssl:0
(dev-libs/openssl-1.1.0j:0/1.1::gentoo, installed) pulled in by
>=dev-libs/openssl-0.9.6m:0/1.1= required by (net-analyzer/tcpdump-4.9.2:0/0::gentoo, installed)
^^^^^^^
=dev-libs/openssl-1.1.0*:0/1.1= required by (net-libs/nodejs-11.6.0:0/0::gentoo, installed)
^ ^^^^^^^^^^^^^
>=dev-libs/openssl-1.1.0g:0[bindist=] required by (net-misc/openssh-7.9_p1-r1:0/0::gentoo, installed)
^^ ^^^^^^^^
(and 23 more with the same problems)
(dev-libs/openssl-1.0.2q:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl:0/0= required by (net-misc/freerdp-2.0.0_rc4:0/2::gentoo, installed)
^^^^^
(and 18 more with the same problem)
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Sun Jan 13, 2019 1:31 pm Post subject: |
|
|
You can post full emerge output with also --verbose-conflicts option
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
Tony0945
Watchman
Joined: 25 Jul 2006
Posts: 5127
Location: Illinois, USA
|
| Posted: Sun Jan 13, 2019 4:13 pm Post subject: |
|
|
| Code: | | emerge -av virtual/rubygems |
This put the virtual in your world file. Perhaps the specific version of rubygems is in your world file.
If anything, you should have run "emerge -a1v virtual/rubygems"
Since you haven't been running etc-update and are inexperienced, I suspect your world file is a mess.
As requested above, run etc-update. Also, use pastebin to post your world file.
| Code: | | wgetpaste /var/lib/portage/world |
a URL will be returned. Post the URL, NOT your worldfile.
If you don't have wgetpaste, emerge it. You do want that one in your world file.
Do not edit your world file. We will advise the emerge commands to fix it. |
|
| Back to top |
|
|
imrambi
Tux's lil' helper
Joined: 12 Feb 2004
Posts: 116
|
| Posted: Sun Jan 13, 2019 10:35 pm Post subject: |
|
|
Set ruby_targets in /etc/portage/make.conf
| Code: | | RUBY_TARGETS="ruby24" |
remove json and racc
| Code: | | emerge -C json racc |
This cleaned up my system to allow me to do a emerge @preserved-rebuild. and am hoping it will allow me to do a emerge -upDN world and all the rest.
Update:
emerge -upDN world still fails. Rubygems still wants ruby23 even though nothing else does and some even show -ruby23. |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Mon Jan 14, 2019 4:09 am Post subject: |
|
|
| Tony0945 wrote: | | Code: | | emerge -av virtual/rubygems |
This put the virtual in your world file. Perhaps the specific version of rubygems is in your world file.
If anything, you should have run "emerge -a1v virtual/rubygems"
Since you haven't been running etc-update and are inexperienced, I suspect your world file is a mess.
As requested above, run etc-update. Also, use pastebin to post your world file.
| Code: | | wgetpaste /var/lib/portage/world |
a URL will be returned. Post the URL, NOT your worldfile.
If you don't have wgetpaste, emerge it. You do want that one in your world file.
Do not edit your world file. We will advise the emerge commands to fix it. |
https://paste.pound-python.org/show/9MOPbR52h0raOgpDWR73/ |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Mon Jan 14, 2019 4:11 am Post subject: |
|
|
| imrambi wrote: | Set ruby_targets in /etc/portage/make.conf
| Code: | | RUBY_TARGETS="ruby24" |
remove json and racc
| Code: | | emerge -C json racc |
This cleaned up my system to allow me to do a emerge @preserved-rebuild. and am hoping it will allow me to do a emerge -upDN world and all the rest.
Update:
emerge -upDN world still fails. Rubygems still wants ruby23 even though nothing else does and some even show -ruby23. |
wgetpaste /etc/portage/make.conf
https://paste.pound-python.org/show/HsnN0KcKmBmhuq1hRaez/
Last edited by gentoo-find on Mon Jan 14, 2019 8:57 am; edited 1 time in total |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Mon Jan 14, 2019 6:47 am Post subject: |
|
|
| Code: | | RUBY_TARGETS="(-ruby23) ruby24 ruby25 ruby26" |
This is not allowed correct should be
| Code: | | RUBY_TARGETS="ruby24 ruby25 ruby26" |
ruby23 target is removed also in a stable system.
Run emerge -UD --with-bdeps y @world before the world update
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Mon Jan 14, 2019 10:15 am Post subject: |
|
|
| fedeliallalinea wrote: | | Code: | | RUBY_TARGETS="(-ruby23) ruby24 ruby25 ruby26" |
This is not allowed correct should be
| Code: | | RUBY_TARGETS="ruby24 ruby25 ruby26" |
ruby23 target is removed also in a stable system.
Run emerge -UD --with-bdeps y @world before the world update |
| Code: |
emerge --ask @preserved-rebuild
* IMPORTANT: config file '/etc/portage/package.accept_keywords/sakaki-tools-repo' needs updating.
* See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
* sections of the emerge man page to learn how to update config files.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] sys-libs/gdbm-1.18.1:0/6::gentoo USE="berkdb nls readline -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] app-shells/zsh-5.6.2::gentoo USE="gdbm pcre unicode -caps -debug -doc -examples -maildir -static" 0 KiB
[ebuild N ] dev-lang/perl-5.28.0:0/5.28::gentoo USE="berkdb gdbm -debug -doc -ithreads" 0 KiB
[ebuild N ] dev-libs/openssl-1.1.0j:0/1.1::gentoo USE="asm zlib -bindist -rfc3779 -sctp -static-libs -test -tls-heartbeat -vanilla" ABI_X86="(64) -32 (-x32)" CPU_FLAGS_X86="(sse2)" 0 KiB
[ebuild R ] net-misc/iputils-20180629::gentoo USE="arping ipv6 ssl -SECURITY_HAZARD -caps -clockdiff -doc -filecaps -gcrypt -idn -libressl -nettle -rarpd -rdisc -static -tftpd -tracepath -traceroute" 0 KiB
[ebuild R ] net-libs/nghttp2-1.35.1:0/1.14::gentoo USE="cxx threads -debug -hpack-tools -jemalloc -libressl -static-libs -test -utils -xml" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] dev-perl/Net-SSLeay-1.850.0::gentoo USE="-examples -libressl -minimal -test" 0 KiB
[ebuild R ] www-servers/nginx-1.15.8-r1:mainline::gentoo USE="http http-cache http2 ipv6 pcre ssl -aio -debug -libatomic -libressl -luajit -pcre-jit -rtmp (-selinux) -threads -vim-syntax" NGINX_MODULES_HTTP="access auth_basic autoindex browser charset empty_gif fastcgi geo grpc gzip limit_conn limit_req map memcached mirror proxy referer rewrite scgi split_clients ssi upstream_hash upstream_ip_hash upstream_keepalive upstream_least_conn upstream_zone userid uwsgi -addition -auth_ldap -auth_pam -auth_request -brotli -cache_purge -dav -dav_ext -degradation -echo -fancyindex -flv -geoip -geoip2 -gunzip -gzip_static -headers_more -image_filter -javascript -lua -memc -metrics -mogilefs -mp4 -naxsi -perl -push_stream -random_index -realip -secure_link -security -slice -slowfs_cache -spdy -sticky -stub_status -sub -upload_progress -upstream_check -vhost_traffic_status -xslt" NGINX_MODULES_MAIL="-imap -pop3 -smtp" NGINX_MODULES_STREAM="-access -geo -geoip -geoip2 -javascript -limit_conn -map -realip -return -split_clients -ssl_preread -upstream_hash -upstream_least_conn -upstream_zone" 0 KiB
[ebuild R ] net-analyzer/tcpdump-4.9.2::gentoo USE="drop-root ssl -libressl -samba -smi -suid -test" 0 KiB
[ebuild R ] dev-libs/pkcs11-helper-1.25.1::gentoo USE="-bindist -doc -gnutls -libressl -nss -static-libs" 0 KiB
[ebuild R ] media-sound/pulseaudio-12.2::gentoo USE="X alsa alsa-plugin asyncns caps dbus gdbm glib gtk ipv6 orc qt5 ssl systemd tcpd udev webrtc-aec -bluetooth -doc -equalizer -gconf -jack -libressl -libsamplerate -lirc -native-headset (-neon) -ofono-headset (-oss) -realtime (-selinux) -sox (-system-wide) -test -zeroconf" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] dev-scheme/guile-2.2.3:12/2.2-1::gentoo USE="deprecated networking nls regex threads -debug -debug-malloc" 0 KiB
[ebuild R ] media-sound/fluidsynth-1.1.11::gentoo USE="alsa dbus ipv6 pulseaudio readline -debug -examples -jack -ladspa -lash -portaudio -sndfile" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] dev-db/sqlite-3.26.0:3::gentoo USE="icu readline -debug -doc -secure-delete -static-libs -tcl -test -tools" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] sys-fs/lvm2-2.02.183::gentoo USE="readline systemd thin udev -device-mapper-only -lvm2create_initrd -sanlock (-selinux) (-static) (-static-libs)" 0 KiB
[ebuild R ] dev-lang/ruby-2.5.3:2.5::gentoo USE="berkdb gdbm ipv6 rdoc ssl -debug -doc -examples -jemalloc -libressl -rubytests -socks5 -static-libs -tk -xemacs" 0 KiB
[ebuild R ] dev-lang/ruby-2.4.5-r1:2.4::gentoo USE="berkdb gdbm ipv6 rdoc ssl -debug -doc -examples -jemalloc -libressl -rubytests -socks5 -static-libs -tk -xemacs" 0 KiB
[ebuild R ] dev-lang/ruby-2.6.0-r1:2.6::gentoo USE="berkdb gdbm ipv6 rdoc ssl -debug -doc -examples -jemalloc -jit -libressl -rubytests -socks5 -static-libs -tk -xemacs" 0 KiB
[ebuild R ] net-misc/curl-7.63.0-r1::gentoo USE="ipv6 ssl -adns -brotli -http2 -idn -kerberos -ldap -metalink -rtmp -samba -ssh -static-libs -test -threads" ABI_X86="(64) -32 (-x32)" CURL_SSL="openssl -gnutls -libressl -mbedtls -nss (-winssl)" 0 KiB
[ebuild R ] sys-block/parted-3.2_p23::gentoo USE="debug nls readline -device-mapper (-selinux) -static-libs" 0 KiB
[ebuild R ] app-text/hunspell-1.7.0:0/1.7::gentoo USE="ncurses nls readline -static-libs" L10N="en -af -bg -ca -cs -cy -da -de -de-1901 -el -eo -es -et -fo -fr -ga -gl -he -hr -hu -ia -id -is -it -kk -km -ku -lt -lv -mi -mk -ms -nb -nl -nn -pl -pt -pt-BR -ro -ru -sk -sl -sq -sv -sw -tn -uk -zu" 0 KiB
[ebuild R ] net-misc/openssh-7.9_p1-r1::gentoo USE="X pam pie ssl -X509 -audit -bindist -debug -hpn -kerberos -ldns -libedit -libressl -livecd -sctp (-selinux) -static -test" 0 KiB
[ebuild R ] dev-libs/libevent-2.1.8:0/2.1-6::gentoo USE="ssl threads -debug -libressl -static-libs -test" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] net-misc/rdesktop-1.8.4::gentoo USE="alsa ipv6 -ao -debug -kerberos -libressl -libsamplerate -oss -pcsc-lite -xrandr" 0 KiB
[ebuild R ] dev-lang/python-2.7.15:2.7::gentoo USE="gdbm ipv6 ncurses readline sqlite ssl (threads) (wide-unicode) xml (-berkdb) -bluetooth -build -doc -examples -hardened -libressl -tk -wininst" 0 KiB
[ebuild R ] dev-lang/python-3.6.6:3.6/3.6m::gentoo USE="gdbm ipv6 ncurses readline sqlite ssl (threads) xml -bluetooth -build -examples -hardened -libressl -test -tk -wininst" 0 KiB
[ebuild R ] dev-lang/python-3.7.0:3.7/3.7m::gentoo USE="gdbm ipv6 ncurses readline sqlite ssl xml -bluetooth -build -examples -hardened -libressl -test -tk -wininst" 0 KiB
[ebuild R ] app-crypt/gnupg-2.2.12::gentoo USE="bzip2 nls readline smartcard ssl -doc -ldap (-selinux) -tofu -tools -usb -user-socket -wks-server" 0 KiB
[ebuild U ] dev-ruby/rjb-1.5.7::gentoo [1.5.5::gentoo] USE="-doc -examples -hardened -test" RUBY_TARGETS="ruby24 ruby25 ruby26%* -ruby23*" 0 KiB
[ebuild R ] net-misc/ntp-4.2.8_p12::gentoo USE="ipv6 readline ssl threads -caps -debug -libressl -openntpd -parse-clocks -samba (-selinux) -snmp -vim-syntax -zeroconf" 0 KiB
[ebuild R ] dev-libs/apr-util-1.6.1-r3:1::gentoo USE="berkdb gdbm sqlite -doc -ldap -libressl -mysql -nss -odbc -openssl -postgres -static-libs" 0 KiB
[ebuild R ] media-sound/ncmpcpp-0.8.2::gentoo USE="clock icu outputs taglib visualizer" 0 KiB
[ebuild R ] dev-ruby/eventmachine-1.2.7::gentoo USE="-doc -test" RUBY_TARGETS="ruby24 ruby25 -ruby23" 0 KiB
[ebuild U ] sys-apps/man-db-2.8.5::gentoo [2.8.4::gentoo] USE="berkdb gdbm manpager nls seccomp zlib (-selinux) -static-libs" 0 KiB
[ebuild R ] dev-libs/cyrus-sasl-2.1.27-r1:2::gentoo USE="berkdb gdbm pam sqlite ssl -authdaemond -java -kerberos -ldapdb -libressl -mysql -openldap -postgres -sample (-selinux) -srp -static-libs -urandom" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] www-servers/lighttpd-1.4.52-r1::gentoo USE="bzip2 gdbm ipv6 pcre sqlite ssl xattr zlib -dbi -doc -fam -geoip -kerberos -ldap -libev -libressl -lua -memcached -minimal -mmap -mysql -php -postgres -rrdtool -sasl (-selinux) -test -webdav" 0 KiB
[ebuild R ] dev-libs/libxml2-2.9.8-r1:2::gentoo USE="icu ipv6 python readline -debug -examples -lzma -static-libs -test" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7 python3_6 python3_7 -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-python/cryptography-2.4.2::gentoo USE="-libressl -test" PYTHON_TARGETS="python2_7 python3_6 python3_7 -pypy -pypy3 -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-lang/spidermonkey-52.9.1_pre1:52::gentoo USE="system-icu -custom-cflags -custom-optimization -debug -minimal -test" 0 KiB
[ebuild R ] dev-db/postgresql-11.1:11::gentoo USE="nls pam python readline server ssl systemd zlib -doc -kerberos -ldap -libressl -llvm -perl (-selinux) -static-libs -tcl -threads -uuid -xml" PYTHON_SINGLE_TARGET="python3_6 -python2_7 -python3_4 -python3_5" PYTHON_TARGETS="python2_7 python3_6 -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-lang/spidermonkey-1.8.5-r6:0/mozjs185::gentoo USE="-debug -minimal -static-libs -test" 0 KiB
[ebuild R ] dev-python/m2crypto-0.31.0::gentoo PYTHON_TARGETS="python2_7 python3_6 python3_7 -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-python/pycairo-1.17.0-r1::gentoo USE="-doc -examples -test" PYTHON_TARGETS="python2_7 python3_6 python3_7* -pypy -pypy3 -python3_4 -python3_5" 0 KiB
[ebuild R ] net-analyzer/net-snmp-5.8:0/35::gentoo USE="X bzip2 ipv6 python ssl tcpd zlib -doc -elf -libressl -lm_sensors -mfd-rewrites -minimal -mysql -netlink -pci -perl -rpm (-selinux) -smux -ucd-compat" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild R ] net-libs/nodejs-11.6.0::gentoo USE="icu npm snapshot ssl -debug -doc -inspector -systemtap -test" CPU_FLAGS_X86="sse2" PYTHON_TARGETS="python2_7" 0 KiB
[ebuild R ] net-irc/weechat-2.3::gentoo USE="alias buflist charset exec fifo fset irc logger lua nls perl python relay ruby scripts spell ssl trigger xfer -doc -guile -php -tcl -test" PYTHON_SINGLE_TARGET="python3_6 -python2_7 -python3_4 -python3_5 -python3_7" PYTHON_TARGETS="python2_7 python3_6 python3_7* -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-libs/gjs-1.50.4::gentoo USE="cairo gtk -examples -test" 0 KiB
[ebuild R ] net-libs/neon-0.30.2:0/27::gentoo USE="nls ssl zlib -doc -expat -gnutls -kerberos -libproxy -libressl -pkcs11 -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild R ] media-gfx/fontforge-20170731-r4::gentoo USE="X gif gtk png python readline unicode -cairo -jpeg -svg -test -tiff -truetype-debugger" PYTHON_SINGLE_TARGET="python3_6 -python2_7 -python3_4 -python3_5" PYTHON_TARGETS="python2_7 python3_6 -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-python/pygobject-3.28.3-r1:3::gentoo USE="cairo -examples -test" PYTHON_TARGETS="python2_7 python3_6 python3_7* -python3_4 -python3_5" 0 KiB
[ebuild R ] dev-ruby/pg-0.21.0::gentoo USE="-doc -test" RUBY_TARGETS="ruby24 ruby25 -ruby23*" 0 KiB
[ebuild U ] dev-lang/php-7.2.14:7.2::gentoo [7.2.13:7.2::gentoo] USE="acl berkdb bzip2 cgi cli ctype fileinfo filter gdbm hash iconv ipv6 json nls opcache phar posix readline session simplexml sqlite ssl systemd tokenizer unicode xml zlib -apache2 -argon2 -bcmath -calendar -cdb -cjk -coverage -curl -debug -embed -enchant -exif -firebird -flatfile -fpm -ftp -gd -gmp -imap -inifile -intl -iodbc -kerberos -ldap -ldap-sasl -libedit -libressl -lmdb -mhash -mssql -mysql -mysqli -oci8-instant-client -odbc -pcntl -pdo -phpdbg -postgres -qdbm -recode (-selinux) -session-mm -sharedmem -snmp -soap -sockets -sodium -spell -sysvipc -test -threads -tidy -tokyocabinet -truetype -wddx -webp -xmlreader -xmlrpc -xmlwriter -xpm -xslt -zip -zip-encryption" 0 KiB
[ebuild U ] net-wireless/wpa_supplicant-2.7-r1::gentoo [2.7::gentoo] USE="dbus hs2-0 qt5 readline ssl -ap -bindist -eap-sim -eapol_test -fasteap -gnutls -libressl -p2p -privsep (-ps3) (-selinux) -smartcard -suiteb -tdls -uncommon-eap-types (-wimax) -wps" 0 KiB
[ebuild R ] net-misc/networkmanager-1.14.4::gentoo USE="dhclient introspection modemmanager ncurses nss ppp systemd wext wifi -audit -bluetooth -connection-sharing (-consolekit) -dhcpcd -elogind -gnutls -iwd -json -ofono -ovs -policykit -resolvconf (-selinux) -teamd -test -vala" ABI_X86="(64) -32 (-x32)" 0 KiB
Total: 54 packages (4 upgrades, 3 new, 47 reinstalls), Size of downloads: 0 KiB
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Running pre-merge checks for media-sound/pulseaudio-12.2
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 4.19.8-gentooshadow-kernel
* Checking for suitable kernel configuration options... [ ok ]
* A preallocated buffer-size of 2048 (kB) or higher is recommended for the HD-audio driver!
* CONFIG_SND_HDA_PREALLOC_SIZE=64
>>> Running pre-merge checks for net-misc/openssh-7.9_p1-r1
>>> Running pre-merge checks for net-libs/nodejs-11.6.0
>>> Running pre-merge checks for net-misc/networkmanager-1.14.4
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 4.19.8-gentooshadow-kernel
* Checking for SYSFS_DEPRECATED support ... [ ok ]
>>> Emerging (1 of 54) sys-libs/gdbm-1.18.1::gentoo
* Fetching files in the background.
* To view fetch progress, run in another terminal:
* tail -f /var/log/emerge-fetch.log
* gdbm-1.18.1.tar.gz BLAKE2B SHA512 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking gdbm-1.18.1.tar.gz to /var/tmp/portage/sys-libs/gdbm-1.18.1/work
>>> Source unpacked in /var/tmp/portage/sys-libs/gdbm-1.18.1/work
>>> Preparing source in /var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1 ...
* Running eautoreconf in '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1' ...
* Running autopoint --force ... [ ok ]
* Running libtoolize --install --copy --force --automake ... [ ok ]
* Running aclocal ... [ !! ]
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out
* ERROR: sys-libs/gdbm-1.18.1::gentoo failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 3118: Called eautoreconf
* environment, line 1023: Called eaclocal
* environment, line 803: Called autotools_run_tool '--at-m4flags' 'aclocal'
* environment, line 741: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of `emerge --info '=sys-libs/gdbm-1.18.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/gdbm-1.18.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
* S: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
>>> Failed to emerge sys-libs/gdbm-1.18.1, Log file:
>>> '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'
*** Resuming merge...
These are the packages that would be merged, in order:
Calculating dependencies... done!
* Messages for package media-sound/pulseaudio-12.2:
* A preallocated buffer-size of 2048 (kB) or higher is recommended for the HD-audio driver!
* CONFIG_SND_HDA_PREALLOC_SIZE=64
* Messages for package sys-libs/gdbm-1.18.1:
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out
* ERROR: sys-libs/gdbm-1.18.1::gentoo failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 3118: Called eautoreconf
* environment, line 1023: Called eaclocal
* environment, line 803: Called autotools_run_tool '--at-m4flags' 'aclocal'
* environment, line 741: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of `emerge --info '=sys-libs/gdbm-1.18.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/gdbm-1.18.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
* S: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
* One or more packages are either masked or have missing dependencies:
*
* sys-libs/gdbm:0=[berkdb] pulled in by:
* (dev-lang/python-3.7.0:3.7/3.7m::gentoo, installed)
*
* >=dev-lang/perl-5.6 pulled in by:
* (sys-devel/autoconf-2.69-r4:2.69/2.69::gentoo, installed)
*
* dev-libs/openssl:0= pulled in by:
* (dev-vcs/git-2.20.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/Authen-SASL-2.160.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/Digest-HMAC-1.30.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Net-SMTP-SSL-1.40.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/IO-Socket-SSL-2.52.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/MailTools-2.190.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/TimeDate-2.300.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Error-0.170.250:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Module-Build-0.422.400:0/0::gentoo, installed)
*
* dev-lang/perl pulled in by:
* (dev-util/intltool-0.51.0-r2:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/XML-Parser-2.440.0:0/0::gentoo, installed)
*
* >=dev-lang/perl-5.18 pulled in by:
* (dev-util/gtk-doc-am-1.25-r1:0/0::gentoo, installed)
*
* dev-lang/perl pulled in by:
* (sys-devel/automake-1.16.1-r1:1.16/1.16::gentoo, installed)
*
* dev-lang/perl pulled in by:
* (sys-apps/help2man-1.47.8:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Locale-gettext-1.70.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (sys-apps/texinfo-6.5:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Text-Unidecode-1.300.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/Unicode-EastAsianWidth-1.330.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/libintl-perl-1.280.0:0/0::gentoo, installed)
*
* dev-libs/openssl:0=[abi_x86_64(-)] pulled in by:
* (app-arch/libarchive-3.3.3:0/13::gentoo, installed)
*
* ~sys-libs/e2fsprogs-libs-1.44.4 pulled in by:
* (sys-fs/e2fsprogs-1.44.4:0/0::gentoo, installed)
*
* dev-libs/openssl:0=[abi_x86_64(-)] pulled in by:
* (app-crypt/rhash-1.3.6-r1:0/0::gentoo, installed)
*
* sys-libs/gdbm:= pulled in by:
* (dev-lang/ruby-2.5.3:2.5/2.5::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/rdoc-6.1.1:0/0::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/test-unit-3.2.9:2/2::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/rake-12.3.2:0/0::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/power_assert-1.1.3:0/0::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/net-telnet-0.2.0:1/1::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/minitest-5.11.3:5/5::gentoo, installed)
*
* dev-libs/openssl:0= pulled in by:
* (dev-perl/Net-SSLeay-1.850.0:0/0::gentoo, installed)
*
* dev-libs/openssl:0= pulled in by:
* (net-misc/openssh-7.9_p1-r1:0/0::gentoo, installed)
*
* sys-libs/gdbm:0=[berkdb] pulled in by:
* (dev-lang/python-2.7.15:2.7/2.7::gentoo, installed)
*
* dev-libs/openssl:0=[abi_x86_64(-)] pulled in by:
* (net-misc/curl-7.63.0-r1:0/0::gentoo, installed)
*
* sys-libs/gdbm:0=[berkdb] pulled in by:
* (dev-lang/python-3.6.6:3.6/3.6m::gentoo, installed)
*
* sys-libs/gdbm:= pulled in by:
* (dev-lang/ruby-2.4.5-r1:2.4/2.4::gentoo, installed)
*
* sys-libs/gdbm:= pulled in by:
* (dev-lang/ruby-2.6.0-r1:2.6/2.6::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/bundler-1.17.3:0/0::gentoo, installed)
*
* >=dev-libs/openssl-0.9.6-r1:0= pulled in by:
* (dev-db/postgresql-11.1:11/11::gentoo, installed)
*
* dev-libs/openssl:0= pulled in by:
* (media-sound/pulseaudio-12.2:0/0::gentoo, installed)
*
* dev-lang/perl pulled in by:
* (sys-devel/autoconf-2.13-r1:2.1/2.1::gentoo, installed)
*
* dev-lang/ruby:2.3 pulled in by:
* (dev-ruby/rubygems-3.0.1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/X11-Protocol-0.560.0-r2:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Net-DBus-1.1.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/XML-Twig-3.520.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Text-Iconv-1.700.0-r2:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/HTML-Parser-3.720.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/HTML-Tagset-3.200.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/libwww-perl-6.270.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/LWP-Protocol-https-6.70.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/WWW-RobotRules-6.20.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/URI-1.730.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Try-Tiny-0.300.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Net-HTTP-6.170.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/IO-Socket-INET6-2.720.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Socket6-0.280.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/LWP-MediaTypes-6.20.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/HTTP-Message-6.130.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/IO-HTML-1.1.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/HTTP-Negotiate-6.10.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/HTTP-Date-6.20.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/HTTP-Daemon-6.10.0-r2:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/HTTP-Cookies-6.40.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/File-Listing-6.40.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Encode-Locale-1.50.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/XML-XPath-1.420.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/Tie-IxHash-1.230.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/File-MimeInfo-0.280.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/File-DesktopEntry-0.220.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/File-BaseDir-0.70.0:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (dev-perl/IPC-System-Simple-1.250.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-ExtUtils-MakeMaker-7.340.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Scalar-List-Utils-1.500.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Exporter-5.730.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Carp-1.500.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-File-Spec-3.740.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-File-Path-2.150.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Encode-2.970.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Time-Local-1.250.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-IO-1.390.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Storable-3.80.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-MIME-Base64-3.150.0-r4:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-IO-Compress-2.74.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Compress-Raw-Bzip2-2.74.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Compress-Raw-Zlib-2.76.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-IO-Socket-IP-0.390.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (dev-perl/Sub-Name-0.210.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-XSLoader-0.300.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-parent-0.236.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-libnet-3.110.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Data-Dumper-2.170.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Getopt-Long-2.500.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Digest-MD5-2.550.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Time-HiRes-1.975.900:0/0::gentoo, installed)
*
* dev-libs/openssl:0= pulled in by:
* (www-client/w3m-0.5.3_p20180125:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Parse-CPAN-Meta-2.150.10-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-File-Temp-0.230.400-r5:0/0::gentoo, installed)
*
* dev-lang/perl:=[-build(-)] pulled in by:
* (perl-core/File-Temp-0.230.400-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-CPAN-Meta-YAML-0.18.0-r3:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-version-0.992.300:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-podlators-4.100.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Text-ParseWords-3.300.0-r4:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Test-Harness-3.420.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Perl-OSType-1.10.0-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Module-Metadata-1.0.33-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-ExtUtils-ParseXS-3.390.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-ExtUtils-Manifest-1.700.0-r5:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-ExtUtils-Install-2.140.0:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-ExtUtils-CBuilder-0.280.230:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-CPAN-Meta-2.150.10-r1:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-JSON-PP-2.970.10:0/0::gentoo, installed)
*
* dev-lang/perl:= pulled in by:
* (virtual/perl-Digest-SHA-6.10.0:0/0::gentoo, installed)
*
* The resume list contains packages that are either masked or have
* unsatisfied dependencies. Please restart/continue the operation
* manually, or use --skipfirst to skip the first package in the list and
* any other packages that may be masked or have missing dependencies.
*
* The following package has failed to build, install, or execute postinst:
*
* (sys-libs/gdbm-1.18.1:0/6::gentoo, ebuild scheduled for merge), Log file:
* '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'
*
|
|
|
| Back to top |
|
|
gentoo-find
n00b
Joined: 07 Apr 2018
Posts: 74
|
| Posted: Mon Jan 14, 2019 1:59 pm Post subject: |
|
|
| fedeliallalinea wrote: | | Code: | | RUBY_TARGETS="(-ruby23) ruby24 ruby25 ruby26" |
This is not allowed correct should be
| Code: | | RUBY_TARGETS="ruby24 ruby25 ruby26" |
ruby23 target is removed also in a stable system.
Run emerge -UD --with-bdeps y @world before the world update |
| Code: |
emerge -avt sys-libs/gdbm
These are the packages that would be merged, in reverse order:
Calculating dependencies... done!
[ebuild N ] sys-libs/gdbm-1.18.1:0/6::gentoo USE="berkdb nls readline -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
Total: 1 package (1 new), Size of downloads: 0 KiB
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-libs/gdbm-1.18.1::gentoo
* gdbm-1.18.1.tar.gz BLAKE2B SHA512 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking gdbm-1.18.1.tar.gz to /var/tmp/portage/sys-libs/gdbm-1.18.1/work
>>> Source unpacked in /var/tmp/portage/sys-libs/gdbm-1.18.1/work
>>> Preparing source in /var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1 ...
* Running eautoreconf in '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1' ...
* Running autopoint --force ... [ ok ]
* Running libtoolize --install --copy --force --automake ... [ ok ]
* Running aclocal ... [ !! ]
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out
* ERROR: sys-libs/gdbm-1.18.1::gentoo failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 3117: Called eautoreconf
* environment, line 1022: Called eaclocal
* environment, line 802: Called autotools_run_tool '--at-m4flags' 'aclocal'
* environment, line 740: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of `emerge --info '=sys-libs/gdbm-1.18.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/gdbm-1.18.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
* S: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
>>> Failed to emerge sys-libs/gdbm-1.18.1, Log file:
>>> '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'
* Messages for package sys-libs/gdbm-1.18.1:
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out
* ERROR: sys-libs/gdbm-1.18.1::gentoo failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 124: Called src_prepare
* environment, line 3117: Called eautoreconf
* environment, line 1022: Called eaclocal
* environment, line 802: Called autotools_run_tool '--at-m4flags' 'aclocal'
* environment, line 740: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of `emerge --info '=sys-libs/gdbm-1.18.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/gdbm-1.18.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
* S: '/var/tmp/portage/sys-libs/gdbm-1.18.1/work/gdbm-1.18.1'
*
* The following package has failed to build, install, or execute postinst:
*
* (sys-libs/gdbm-1.18.1:0/6::gentoo, ebuild scheduled for merge), Log file:
* '/var/tmp/portage/sys-libs/gdbm-1.18.1/temp/build.log'
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Mon Jan 14, 2019 3:34 pm Post subject: |
|
|
You can post /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out output with wgetpaste?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
med01
n00b
Joined: 12 Mar 2017
Posts: 11
Location: Tunisia
|
| Posted: Thu Jan 31, 2019 11:00 pm Post subject: |
|
|
Hello,
I think I have the same problem with sys-libs/gdbm-1.18.1:0/6::gentoo
| Code: | # wgetpaste /var/tmp/portage/sys-libs/gdbm-1.18.1/temp/aclocal.out
Your paste can be seen here: https://paste.pound-python.org/show/CqDLOSAaZuVh63hlZ6Qi/ |
The perl module strict.pm can't be found because I had removed many perl packages when trying to resolve conflicts. |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Fri Feb 01, 2019 7:04 am Post subject: |
|
|
You can posr perl -V output and ls /usr/lib64/perl5/5.26.2/strict.pm?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
med01
n00b
Joined: 12 Mar 2017
Posts: 11
Location: Tunisia
|
| Posted: Fri Feb 01, 2019 9:07 pm Post subject: |
|
|
| Code: | ~ # perl -V
Can't locate strict.pm in @INC (you may need to install the strict module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.22.1 /usr/local/share/perl/5.22.1 /usr/lib/x86_64-linux-gnu/perl5/5.22 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.22 /usr/share/perl/5.22 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /usr/share/perl/5.22/Config.pm line 14.
BEGIN failed--compilation aborted at /usr/share/perl/5.22/Config.pm line 14.
Compilation failed in require.
BEGIN failed--compilation aborted.
~ # ls /usr/lib64/perl5/5.26.2/strict.pm
ls: cannot access '/usr/lib64/perl5/5.26.2/strict.pm': No such file or directory |
As you see I broke my perl env  |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30909
Location: here
|
| Posted: Sat Feb 02, 2019 5:04 pm Post subject: |
|
|
You have perl 5.22? You can post qlist -Iv dev-lang/perl output?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
