Gentoo Forums :: View topic - Short freezes after waking up from suspend

Short freezes after waking up from suspend

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

Kernel & Hardware

View previous topic :: View next topic

Author

Message

ganywa
n00b
n00b

Joined: 13 Dec 2018
Posts: 6

Posted: Thu Dec 13, 2018 4:48 am Post subject: Short freezes after waking up from suspend

Hi,
Sometimes my computer is frozen for a few seconds (it can vary a lot between 1 and around 10-15 seconds) after waking up from suspend. When frozen, the monitor is working (i.e. I can see what I saw before suspending, but it doesn't show any changes until it comes out of the freeze), but everything else seems to be stopped.
After the freeze everything works normally, and everything I did during it has its effect, so e.g. if I was typing 'foo' when it was frozen nothing happened, but after its end, 'foo' would be typed.
This doesn't happen after hibernating (at least I haven't experienced it).
The onset is seemingly random (I couldn't find a pattern in when it froze and when it did not), though usually directly after boot there is no freeze with the first suspend.

Here are the respective parts of dmesg:

With freeze:

Code:

[ 1073.500751] ACPI: Waking up from system sleep state S3
[ 1073.592755] ACPI: EC: interrupt unblocked
[ 1073.607282] ACPI: EC: event unblocked
[ 1073.608643] sd 1:0:0:0: [sdb] Starting disk
[ 1073.608644] sd 0:0:0:0: [sda] Starting disk
[ 1073.621408] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1073.681847] r8169 0000:04:00.0 enp4s0: link down
[ 1073.833571] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 1073.833577] usb 2-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1073.866745] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1073.919420] ata6: SATA link down (SStatus 0 SControl 300)
[ 1073.919465] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1073.919781] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1073.919783] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1073.920171] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1073.920173] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1073.920303] ata1.00: configured for UDMA/133
[ 1073.927327] ata5: SATA link down (SStatus 0 SControl 300)
[ 1073.975553] usb 2-1.2: reset full-speed USB device number 4 using ehci-pci
[ 1074.580314] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1078.437958] r8169 0000:04:00.0 enp4s0: link up
[ 1078.962532] ata2: link is slow to respond, please be patient (ready=0)
[ 1083.642528] ata2: COMRESET failed (errno=-16)
[ 1088.995561] ata2: link is slow to respond, please be patient (ready=0)
[ 1089.983533] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1089.983850] ata2.00: unexpected _GTF length (8)
[ 1089.984361] ata2.00: unexpected _GTF length (8)
[ 1089.984522] ata2.00: configured for UDMA/133
[ 1089.994917] usb 1-1.6:1.0: rebind failed: -517
[ 1089.994928] usb 1-1.6:1.1: rebind failed: -517
[ 1089.995323] OOM killer enabled.
[ 1089.995323] Restarting tasks ... done.
[ 1090.091073] video LNXVIDEO:01: Restoring backlight state
[ 1090.348527] PM: suspend exit

Without freeze:

Code:

[ 1208.931932] ACPI: Waking up from system sleep state S3
[ 1209.022949] ACPI: EC: interrupt unblocked
[ 1209.037313] ACPI: EC: event unblocked
[ 1209.038737] sd 0:0:0:0: [sda] Starting disk
[ 1209.038761] sd 1:0:0:0: [sdb] Starting disk
[ 1209.051518] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1209.110975] r8169 0000:04:00.0 enp4s0: link down
[ 1209.260746] usb 2-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1209.260763] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 1209.287242] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1209.352354] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1209.352425] ata5: SATA link down (SStatus 0 SControl 300)
[ 1209.352589] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1209.352591] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1209.352609] ata6: SATA link down (SStatus 0 SControl 300)
[ 1209.352805] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1209.352978] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1209.352980] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1209.353070] ata2.00: unexpected _GTF length (8)
[ 1209.353113] ata1.00: configured for UDMA/133
[ 1209.353411] ata2.00: unexpected _GTF length (8)
[ 1209.353465] ata2.00: configured for UDMA/133
[ 1209.402707] usb 2-1.2: reset full-speed USB device number 4 using ehci-pci
[ 1210.017976] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1210.170946] usb 1-1.6:1.0: rebind failed: -517
[ 1210.170955] usb 1-1.6:1.1: rebind failed: -517
[ 1210.171134] OOM killer enabled.
[ 1210.171134] Restarting tasks ... done.
[ 1210.189015] video LNXVIDEO:01: Restoring backlight state
[ 1210.324154] PM: suspend exit

Thanks in advance for replying.

Yamakuzure
Advocate

Joined: 21 Jun 2006
Posts: 2283
Location: Adendorf, Germany

Posted: Thu Dec 13, 2018 8:55 am Post subject:

ata2 doesn't come up. That's probably /dev/sdb? When you have no freeze, your ata2 is up before ata1 is even finished, but in the freeze log you have:

Code:

[ 1078.962532] ata2: link is slow to respond, please be patient (ready=0)
[ 1083.642528] ata2: COMRESET failed (errno=-16)
[ 1088.995561] ata2: link is slow to respond, please be patient (ready=0)
[ 1089.983533] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

There is your 11 seconds freeze.

I'd check the drive with smartctl, and if it is a desktop, the cabling as well.

Just came to my mind: Is ata2 (/dev/sdb) a DVD writer or something like that? And if so, is it empty when you experience the freeze?
_________________
Important German:

"Aha" - German reaction to pretend that you are really interested while giving no f*ck.
"Tja" - German reaction to the apocalypse, nuclear war, an alien invasion or no bread in the house.

ganywa
n00b
n00b

Joined: 13 Dec 2018
Posts: 6

Posted: Fri Dec 14, 2018 2:27 pm Post subject:

The computer is a laptop, and originally there was a DVD / CD drive in the place of /dev/sdb, but currently there is an SSD (ADATA SX930 240 GB) there.
A long test and a short test run by smartctl both return PASSED for the drive (though both take only one minute).
There are some errors (starting on line 138) in the output of smartctl -s on -x /dev/sdb:

Code:

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.65-gentoo-mobilpc] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: ADATA SX930
Serial Number: 2H2720011327
LU WWN Device Id: 5 707c18 10052d3fc
Firmware Version: 6.8SE
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Dec 14 14:55:24 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
            was never started.
            Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
            without error or no self-test has ever
            been run.
Total time to complete Offline
data collection:    ( 32) seconds.
Offline data collection
capabilities:       (0x5b) SMART execute Offline immediate.
            Auto Offline data collection on/off support.
            Suspend Offline collection upon new
            command.
            Offline surface scan supported.
            Self-test supported.
            No Conveyance Self-test supported.
            Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
            power-saving mode.
            Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
            General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities:    (0x0039) SCT Status supported.
            SCT Error Recovery Control supported.
            SCT Feature Control supported.
            SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 3719
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 1528
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 26480
169 Unknown_Attribute PO--C- 100 100 010 - 917507
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute -O--C- 193 193 000 - 4301652009
175 Program_Fail_Count_Chip PO--C- 065 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 2050
192 Power-Off_Retract_Count -O--C- 100 100 000 - 317
194 Temperature_Celsius -O---K 071 071 030 - 29 (Min/Max 28/29)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
231 Temperature_Celsius PO--CK 099 099 005 - 1
233 Media_Wearout_Indicator -O--CK 100 100 000 - 24527043584
234 Unknown_Attribute -O--CK 100 100 000 - 37082575680
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 5972852596
242 Total_LBAs_Read -O--CK 100 100 000 - 5489074072
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 23722 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23722 [169] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23721 [168] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23720 [167] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23719 [166] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23718 [165] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23717 [164] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23716 [163] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

Error 23715 [162] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 11 03 d4 b0 e0 00 Error:

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3719 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Max Temperature: 0 Celsius
Lifetime Max Temperature: 0 Celsius

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (308)

Index Estimated Time Temperature Celsius
309 2018-12-14 06:58 30 ***********
... ..( 3 skipped). .. ***********
313 2018-12-14 07:02 30 ***********
314 2018-12-14 07:03 31 ************
... ..( 8 skipped). .. ************
323 2018-12-14 07:12 31 ************
324 2018-12-14 07:13 32 *************
... ..( 12 skipped). .. *************
337 2018-12-14 07:26 32 *************
338 2018-12-14 07:27 33 **************
339 2018-12-14 07:28 32 *************
340 2018-12-14 07:29 33 **************
... ..( 15 skipped). .. **************
356 2018-12-14 07:45 33 **************
357 2018-12-14 07:46 34 ***************
358 2018-12-14 07:47 33 **************
... ..( 5 skipped). .. **************
364 2018-12-14 07:53 33 **************
365 2018-12-14 07:54 34 ***************
366 2018-12-14 07:55 34 ***************
367 2018-12-14 07:56 34 ***************
368 2018-12-14 07:57 33 **************
... ..( 2 skipped). .. **************
371 2018-12-14 08:00 33 **************
372 2018-12-14 08:01 34 ***************
... ..( 6 skipped). .. ***************
379 2018-12-14 08:08 34 ***************
380 2018-12-14 08:09 35 ****************
381 2018-12-14 08:10 35 ****************
382 2018-12-14 08:11 36 *****************
... ..( 4 skipped). .. *****************
387 2018-12-14 08:16 36 *****************
388 2018-12-14 08:17 37 ******************
389 2018-12-14 08:18 36 *****************
390 2018-12-14 08:19 35 ****************
... ..( 4 skipped). .. ****************
395 2018-12-14 08:24 35 ****************
396 2018-12-14 08:25 ? -
397 2018-12-14 08:26 ? -
398 2018-12-14 08:27 24 *****
399 2018-12-14 08:28 27 ********
400 2018-12-14 08:29 28 *********
401 2018-12-14 08:30 30 ***********
402 2018-12-14 08:31 28 *********
403 2018-12-14 08:32 28 *********
404 2018-12-14 08:33 29 **********
405 2018-12-14 08:34 29 **********
406 2018-12-14 08:35 27 ********
407 2018-12-14 08:36 28 *********
408 2018-12-14 08:37 28 *********
409 2018-12-14 08:38 29 **********
... ..( 2 skipped). .. **********
412 2018-12-14 08:41 29 **********
413 2018-12-14 08:42 30 ***********
... ..( 3 skipped). .. ***********
417 2018-12-14 08:46 30 ***********
418 2018-12-14 08:47 31 ************
... ..( 3 skipped). .. ************
422 2018-12-14 08:51 31 ************
423 2018-12-14 08:52 32 *************
... ..( 2 skipped). .. *************
426 2018-12-14 08:55 32 *************
427 2018-12-14 08:56 ? -
... ..( 15 skipped). .. -
443 2018-12-14 09:12 ? -
444 2018-12-14 09:13 28 *********
445 2018-12-14 09:14 29 **********
446 2018-12-14 09:15 32 *************
447 2018-12-14 09:16 33 **************
448 2018-12-14 09:17 34 ***************
449 2018-12-14 09:18 34 ***************
450 2018-12-14 09:19 34 ***************
451 2018-12-14 09:20 35 ****************
452 2018-12-14 09:21 ? -
453 2018-12-14 09:22 27 ********
454 2018-12-14 09:23 27 ********
455 2018-12-14 09:24 26 *******
456 2018-12-14 09:25 26 *******
457 2018-12-14 09:26 27 ********
458 2018-12-14 09:27 27 ********
459 2018-12-14 09:28 28 *********
460 2018-12-14 09:29 28 *********
461 2018-12-14 09:30 29 **********
... ..( 2 skipped). .. **********
464 2018-12-14 09:33 29 **********
465 2018-12-14 09:34 30 ***********
466 2018-12-14 09:35 30 ***********
467 2018-12-14 09:36 31 ************
468 2018-12-14 09:37 30 ***********
... ..( 13 skipped). .. ***********
4 2018-12-14 09:51 30 ***********
5 2018-12-14 09:52 31 ************
6 2018-12-14 09:53 32 *************
7 2018-12-14 09:54 32 *************
8 2018-12-14 09:55 33 **************
9 2018-12-14 09:56 33 **************
10 2018-12-14 09:57 33 **************
11 2018-12-14 09:58 34 ***************
12 2018-12-14 09:59 34 ***************
13 2018-12-14 10:00 34 ***************
14 2018-12-14 10:01 32 *************
15 2018-12-14 10:02 ? -
16 2018-12-14 10:03 24 *****
17 2018-12-14 10:04 27 ********
18 2018-12-14 10:05 26 *******
19 2018-12-14 10:06 27 ********
20 2018-12-14 10:07 28 *********
... ..( 2 skipped). .. *********
23 2018-12-14 10:10 28 *********
24 2018-12-14 10:11 29 **********
... ..( 4 skipped). .. **********
29 2018-12-14 10:16 29 **********
30 2018-12-14 10:17 30 ***********
... ..( 5 skipped). .. ***********
36 2018-12-14 10:23 30 ***********
37 2018-12-14 10:24 31 ************
... ..( 10 skipped). .. ************
48 2018-12-14 10:35 31 ************
49 2018-12-14 10:36 30 ***********
50 2018-12-14 10:37 ? -
... ..( 10 skipped). .. -
61 2018-12-14 10:48 ? -
62 2018-12-14 10:49 30 ***********
63 2018-12-14 10:50 30 ***********
64 2018-12-14 10:51 30 ***********
65 2018-12-14 10:52 31 ************
66 2018-12-14 10:53 30 ***********
... ..( 2 skipped). .. ***********
69 2018-12-14 10:56 30 ***********
70 2018-12-14 10:57 31 ************
... ..( 8 skipped). .. ************
79 2018-12-14 11:06 31 ************
80 2018-12-14 11:07 32 *************
... ..( 10 skipped). .. *************
91 2018-12-14 11:18 32 *************
92 2018-12-14 11:19 31 ************
93 2018-12-14 11:20 32 *************
... ..( 6 skipped). .. *************
100 2018-12-14 11:27 32 *************
101 2018-12-14 11:28 33 **************
... ..( 10 skipped). .. **************
112 2018-12-14 11:39 33 **************
113 2018-12-14 11:40 34 ***************
114 2018-12-14 11:41 34 ***************
115 2018-12-14 11:42 35 ****************
116 2018-12-14 11:43 35 ****************
117 2018-12-14 11:44 35 ****************
118 2018-12-14 11:45 36 *****************
... ..( 3 skipped). .. *****************
122 2018-12-14 11:49 36 *****************
123 2018-12-14 11:50 37 ******************
... ..( 8 skipped). .. ******************
132 2018-12-14 11:59 37 ******************
133 2018-12-14 12:00 38 *******************
... ..( 2 skipped). .. *******************
136 2018-12-14 12:03 38 *******************
137 2018-12-14 12:04 35 ****************
138 2018-12-14 12:05 35 ****************
139 2018-12-14 12:06 35 ****************
140 2018-12-14 12:07 30 ***********
141 2018-12-14 12:08 31 ************
... ..( 3 skipped). .. ************
145 2018-12-14 12:12 31 ************
146 2018-12-14 12:13 ? -
147 2018-12-14 12:14 23 ****
148 2018-12-14 12:15 24 *****
149 2018-12-14 12:16 25 ******
150 2018-12-14 12:17 29 **********
151 2018-12-14 12:18 30 ***********
... ..( 3 skipped). .. ***********
155 2018-12-14 12:22 30 ***********
156 2018-12-14 12:23 ? -
... ..( 14 skipped). .. -
171 2018-12-14 12:38 ? -
172 2018-12-14 12:39 33 **************
173 2018-12-14 12:40 33 **************
174 2018-12-14 12:41 33 **************
175 2018-12-14 12:42 34 ***************
... ..( 4 skipped). .. ***************
180 2018-12-14 12:47 34 ***************
181 2018-12-14 12:48 32 *************
182 2018-12-14 12:49 32 *************
183 2018-12-14 12:50 33 **************
184 2018-12-14 12:51 33 **************
185 2018-12-14 12:52 34 ***************
186 2018-12-14 12:53 34 ***************
187 2018-12-14 12:54 34 ***************
188 2018-12-14 12:55 35 ****************
... ..( 7 skipped). .. ****************
196 2018-12-14 13:03 35 ****************
197 2018-12-14 13:04 34 ***************
... ..( 10 skipped). .. ***************
208 2018-12-14 13:15 34 ***************
209 2018-12-14 13:16 33 **************
210 2018-12-14 13:17 33 **************
211 2018-12-14 13:18 33 **************
212 2018-12-14 13:19 32 *************
213 2018-12-14 13:20 ? -
... ..( 7 skipped). .. -
221 2018-12-14 13:28 ? -
222 2018-12-14 13:29 26 *******
... ..( 3 skipped). .. *******
226 2018-12-14 13:33 26 *******
227 2018-12-14 13:34 27 ********
... ..( 3 skipped). .. ********
231 2018-12-14 13:38 27 ********
232 2018-12-14 13:39 28 *********
... ..( 2 skipped). .. *********
235 2018-12-14 13:42 28 *********
236 2018-12-14 13:43 29 **********
... ..( 6 skipped). .. **********
243 2018-12-14 13:50 29 **********
244 2018-12-14 13:51 30 ***********
245 2018-12-14 13:52 30 ***********
246 2018-12-14 13:53 ? -
247 2018-12-14 13:54 21 **
248 2018-12-14 13:55 23 ****
249 2018-12-14 13:56 25 ******
250 2018-12-14 13:57 27 ********
251 2018-12-14 13:58 28 *********
252 2018-12-14 13:59 29 **********
253 2018-12-14 14:00 23 ****
254 2018-12-14 14:01 23 ****
255 2018-12-14 14:02 24 *****
256 2018-12-14 14:03 24 *****
257 2018-12-14 14:04 25 ******
258 2018-12-14 14:05 25 ******
259 2018-12-14 14:06 26 *******
... ..( 3 skipped). .. *******
263 2018-12-14 14:10 26 *******
264 2018-12-14 14:11 27 ********
... ..( 2 skipped). .. ********
267 2018-12-14 14:14 27 ********
268 2018-12-14 14:15 26 *******
269 2018-12-14 14:16 25 ******
... ..( 6 skipped). .. ******
276 2018-12-14 14:23 25 ******
277 2018-12-14 14:24 26 *******
... ..( 16 skipped). .. *******
294 2018-12-14 14:41 26 *******
295 2018-12-14 14:42 27 ********
296 2018-12-14 14:43 28 *********
... ..( 4 skipped). .. *********
301 2018-12-14 14:48 28 *********
302 2018-12-14 14:49 ? -
... ..( 2 skipped). .. -
305 2018-12-14 14:52 ? -
306 2018-12-14 14:53 28 *********
307 2018-12-14 14:54 28 *********
308 2018-12-14 14:55 29 **********

SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)

Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 1528 --- Lifetime Power-On Resets
0x01 0x018 6 5972852596 --- Logical Sectors Written
0x01 0x020 6 40481632 --- Number of Write Commands
0x01 0x028 6 5489074072 --- Logical Sectors Read
0x01 0x030 6 86245425 --- Number of Read Commands
0x01 0x038 6 13388400000 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 4 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 26480 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5315 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

ganywa
n00b
n00b

Joined: 13 Dec 2018
Posts: 6

Posted: Wed Jan 23, 2019 2:29 am Post subject: Solved

It seems that the SSD was faulty as I changed it to another one, and I haven't encountered any freezes yet.

Display posts from previous:

	Gentoo Forums Forum Index Kernel & Hardware	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy