maiku
Guru
Joined: 24 Mar 2004
Posts: 581
Location: Escaping from NY
|
 Posted: Tue Jun 05, 2018 4:12 pm Post subject: NETDEV WATCHDOG error before ethernet comes up |
 |
|
I've configured eth0 with a static IP and with a bridge. This worked on my old laptop previously and I pulled the config to the new laptop. I'm getting this error in dmesg when eth0 comes up:
| Code: | [ 802.783068] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[ 802.783086] WARNING: CPU: 7 PID: 0 at net/sched/sch_generic.c:473 dev_watchdog+0x1e7/0x1f0
[ 802.783088] Modules linked in: xhci_plat_hcd vhost_net vhost tcpm typec snd_usb_audio snd_usbmidi_lib snd_seq_midi snd_rawmidi roles pata_atiixp nfs_layout_flexfiles gspca_main cdc_acm amdgpu mfd_core chash i2c_algo_bit gpu_sched drm_kms_helper snd_hda_codec_realtek syscopyarea sysfillrect sysimgblt fb_sys_fops snd_hda_codec_generic ttm snd_hda_codec_hdmi drm kvm_amd kvm snd_hda_intel irqbypass snd_hda_codec ath10k_pci snd_hwdep snd_hda_core xhci_pci ath10k_core i2c_piix4 r8169 ath xhci_hcd acer_wireless
[ 802.783117] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.17.0-gentoo #9
[ 802.783118] Hardware name: Acer Aspire A315-41/Metapod_RR, BIOS V1.01 01/19/2018
[ 802.783121] RIP: 0010:dev_watchdog+0x1e7/0x1f0
[ 802.783122] RSP: 0018:ffff88022efc3eb8 EFLAGS: 00010296
[ 802.783123] RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000
[ 802.783124] RDX: 0000000000040400 RSI: 00000000000000f6 RDI: 0000000000000300
[ 802.783126] RBP: ffff8802248a0438 R08: 0000000000000001 R09: 0000000000000408
[ 802.783127] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8802248a0000
[ 802.783128] R13: 0000000000000007 R14: 0000000000000202 R15: ffffffff82406000
[ 802.783129] FS: 0000000000000000(0000) GS:ffff88022efc0000(0000) knlGS:0000000000000000
[ 802.783130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 802.783131] CR2: fffff900c1f87000 CR3: 000000021ab9e000 CR4: 00000000003406e0
[ 802.783133] Call Trace:
[ 802.783135] <IRQ>
[ 802.783138] ? qdisc_reset+0xd0/0xd0
[ 802.783141] call_timer_fn+0x16/0x80
[ 802.783143] expire_timers+0x7a/0x90
[ 802.783145] run_timer_softirq+0x6d/0x130
[ 802.783147] ? __hrtimer_run_queues+0xee/0x180
[ 802.783148] ? ktime_get+0x47/0xb0
[ 802.783151] ? lapic_next_event+0x11/0x20
[ 802.783154] __do_softirq+0xdf/0x1e6
[ 802.783157] irq_exit+0xaf/0xc0
[ 802.783159] smp_apic_timer_interrupt+0x58/0xa0
[ 802.783161] apic_timer_interrupt+0xf/0x20
[ 802.783163] </IRQ>
[ 802.783166] RIP: 0010:cpuidle_enter_state+0x128/0x210
[ 802.783167] RSP: 0018:ffffc90000d37ec8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
[ 802.783169] RAX: ffff88022efe8340 RBX: 0000000000000002 RCX: 000000000000001f
[ 802.783170] RDX: 000000bae99943a5 RSI: 0000000000027b40 RDI: 0000000000000000
[ 802.783171] RBP: ffff8802250ca000 R08: 0000017ac09ba154 R09: 000000000000000a
[ 802.783172] R10: 00000000ffffffff R11: 0000000000000afe R12: 000000bae99943a5
[ 802.783172] R13: 000000badaff5359 R14: 0000000000000002 R15: ffff880226949000
[ 802.783176] ? cpuidle_enter_state+0x121/0x210
[ 802.783179] do_idle+0x1e0/0x250
[ 802.783181] cpu_startup_entry+0x1b/0x20
[ 802.783183] secondary_startup_64+0xa5/0xb0
[ 802.783185] Code: 50 78 48 63 4d e8 eb 98 4c 89 e7 c6 05 39 39 ca 00 01 e8 bd 8f fd ff 89 d9 48 89 c2 4c 89 e6 48 c7 c7 38 98 2b 82 e8 69 3f 85 ff <0f> 0b eb c6 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 07 00
[ 802.783215] ---[ end trace 24b664fdf05b074b ]---
[ 802.792458] r8169 0000:01:00.1 eth0: link up |
And then the devices on the network can't connect to it. I've also tried booting with the noapic and pci=noacpi kernel command line options, and the same thing happens.
lspci
| Code: | 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15d0
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 15d1
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:01.6 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15d3
00:01.7 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15d3
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15db
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15dc
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15e8
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15e9
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ea
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15eb
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ec
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ed
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ee
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ef
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
01:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 15dd (rev c4)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15de
03:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 15df
03:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15e0
03:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15e1
03:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Device 15e3
04:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61) |
dmesg detection:
| Code: | [ 3.241380] r8169 0000:01:00.1 eth0: RTL8411 at 0x000000004a6e0662, 98:28:a6:03:e1:74, XID 1c800800 IRQ 42
[ 3.241383] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
[Moderator edit: changed [quote] tags to [code] tags to preserve output layout. -Hu]
_________________
Michael |
|
Networking & Security
