View previous topic :: View next topic |
Author |
Message |
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 7:28 am Post subject: [Solved] Brother MFP |
|
|
Greetings, dear fellows!
I'd be glad to hear any advises on the following issue.
I've sold my good old Xerox 3117 and bought an MFP Brother DCP-L2500DR with duplex and scanner. Scanner works. As for printer it works normally on spare partition with Debian, but doesn't print on Gentoo at all.
I've tried different configurations but no way.
At the moment there is a such configuration:
- usb printing option in the kernel is disabled;
- usb flag in package.use is enabled;
- user added to groups lpadmin, lp, sys;
- MFP set as a default printer;
- all necessary directories were created;
- CUPS daemon works;
- the printer is detected;
- the kernel IA32_EMULATION option is enabled;
- statically compiled x86 32-bit binaries installed, scripts modified.
All seems to be done well, but all jobs in queue are "paused/stopped by user" and the printer is idle.
Code: |
$ lpstat -a
Brother_DCP-L2500D принимает запросы с момента Вт 08 май 2018 21:44:38
$ lsusb
(...)
Bus 001 Device 004: ID 04f9:0321 Brother Industries, Ltd DCP-L2500D
(...)
# lpinfo -v
file cups-brf:/
network ipps
network https
network ipp
network http
network beh
network socket
direct usb://Brother/DCP-L2500D%20series?serial=(...)
network lpd
# lpinfo -m | grep brother
brother-DCPL2500D-cups-en.ppd Brother DCP-L2500D for CUPS
lsb/usr/brother/brother-DCPL2500D-cups-en.ppd Brother DCP-L2500D for CUPS
$ ls /usr/libexec/cups/filter/brother*
/usr/libexec/cups/filter/brother_lpdwrapper_DCPL2500D
$ ls /usr/lib64/cups/filter/
brother_lpdwrapper_DCPL2500D
|
PS
Sincerely,
Cyril Graf.
St.-Petersburg, Ingria.
Last edited by Cyril Graf on Tue Oct 30, 2018 6:28 pm; edited 1 time in total |
|
Back to top |
|
|
grumblebear Apprentice
Joined: 26 Feb 2008 Posts: 202
|
Posted: Wed May 09, 2018 8:07 am Post subject: |
|
|
For my old Epson multifunction device udev created the corresponding device node with group set to scanner instead of lp. Maybe the same is true for Brother. Find the device node with lsusb and check. |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 8:32 am Post subject: |
|
|
grumblebear wrote: | For my old Epson multifunction device udev created the corresponding device node with group set to scanner instead of lp. Maybe the same is true for Brother. Find the device node with lsusb and check. |
There are only the mouse and the printer:
Code: | # lsusb -t
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 1: Dev 5, If 0, Class=Printer, Driver=, 480M
|__ Port 1: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 480M
# lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 04f9:0321 Brother Industries, Ltd DCP-L2500D
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
|
|
Back to top |
|
|
grumblebear Apprentice
Joined: 26 Feb 2008 Posts: 202
|
Posted: Wed May 09, 2018 9:52 am Post subject: |
|
|
And what does 'ls -l /dev/bus/usb/001/005' say? It should belong to group lp. |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 10:13 am Post subject: |
|
|
grumblebear wrote: | And what does 'ls -l /dev/bus/usb/001/005' say? It should belong to group lp. |
It belongs. |
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Wed May 09, 2018 3:02 pm Post subject: |
|
|
Maybe try printing with another program ? I spent few hours trying to set my printer, then I tried with Evince or FoxIt Reader and it worked ( KDE Okular is not printing for me) _________________ Sent from Windows |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 3:38 pm Post subject: |
|
|
mir3x wrote: | Maybe try printing with another program ? I spent few hours trying to set my printer, then I tried with Evince or FoxIt Reader and it worked ( KDE Okular is not printing for me) |
I tried to print with different programs including lpr and Evince as well but all the same: the printer is idle, all jobs are "completed", but the printer is not printing (( |
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Wed May 09, 2018 4:48 pm Post subject: |
|
|
So if the job is completed - it must be drivers issue
if you used brother-overlay - try from brother website,
if u used from website try brother-overlay ( I checked there is brother-dcpl2500d-bin package) _________________ Sent from Windows |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 6:00 pm Post subject: |
|
|
mir3x wrote: | So if the job is completed - it must be drivers issue
if you used brother-overlay - try from brother website,
if u used from website try brother-overlay ( I checked there is brother-dcpl2500d-bin package) |
Now I removed rpm-drivers and installed brother-overlay driver (dcpl2500d-bin).
Code: | # lpstat -a
Brother принимает запросы с момента Ср 09 май 2018 20:41:40
# lpinfo -v
direct usb://Brother/DCP-L2500D%20series?serial=(...)
file cups-brf:/
network ipps
network ipp
network http
network https
network beh
network lpd
network socket
$ lsusb -t
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 1: Dev 2, If 0, Class=Printer, Driver=, 480M
|__ Port 1: Dev 2, If 1, Class=Vendor Specific Class, Driver=, 480M
$ ls -l /dev/bus/usb/001/002
crw-rw-r-- 1 root lp 189, 1 май 9 20:43 /dev/bus/usb/001/002
$ sudo dmesg | grep -i Brother
[ 1.143431] usb 1-1: Manufacturer: Brother
$ /usr/sbin/lpinfo -m | grep -i brother
brother-BrGenML1-cups-en.ppd Brother BrGenML1 for CUPS |
No any difference, all jobs complete, printer is silent (( |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 6:04 pm Post subject: |
|
|
Cyril Graf wrote: | No any difference, all jobs complete, printer is silent (( |
But something new appeared in the log-file:
Quote: | [CGI] Unable to execute ippfind utility: No such file or directory |
but why do I need it, the printer is set locally.. |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Wed May 09, 2018 6:58 pm Post subject: |
|
|
I have added zeroconf globally then reemerged world with --newuse, the error with ippfind is gone, but printer is steel silent. Such a difficult issue, just dont know what to do.. ((( |
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Wed May 09, 2018 7:41 pm Post subject: |
|
|
ipp, avahi are needed for network printers only.
Have u checked troubleshooting->Generic LPR printer driver on amd64 section there ?
https://wiki.gentoo.org/wiki/Brother_networked_printer
( thats messy I'm happy I dont use Brother, but I heard a lot of good things about Brother )
As I understand it requires glibc exaclty 2.25.12 ? Dont try compiling just download it. _________________ Sent from Windows |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Fri May 11, 2018 3:38 pm Post subject: |
|
|
mir3x wrote: | ipp, avahi are needed for network printers only. |
Yep, it didn't help.
When a job is completed, there is a phrase "paused by user"(instead of username) in the column "user".
Is it normal? May be it is not a driver issue?
mir3x wrote: | Have u checked troubleshooting->Generic LPR printer driver on amd64 section there ? |
I did as it is said, but i chose correct driver for my printer, not generic, and did the rest as prescribed in the article.
mir3x wrote: | ( thats messy I'm happy I dont use Brother, but I heard a lot of good things about Brother ) |
I've got lots of different printers and plotters on my job (highproductive, wideformat...), and I can say that every vendor has good and bad models, and every model has good and bad sides. Generally, the newest is the worst )) Old xeroxes were bulletproof, new ricoh and kyocera are not bad, but only in high-productive niche. HP806DN is good as a printer, but as an MFP (hp enterprise 830) it's a fiasco...
As about Brother i cannot say nothing at all, i chose it for home and what is it - we'll see.
mir3x wrote: | As I understand it requires glibc exaclty 2.25.12 ? Dont try compiling just download it. |
Nothing is said about the specific version. May be I misunderstood, but i thought its just an example. |
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Sun May 13, 2018 5:26 pm Post subject: |
|
|
OK about pause, It might be just stupid message ( or maybe something is wrong in gentoo prining wiki ) ,
I have "withheld" instead paused, but its printed: ( withehld ~ stop, suspend, withhold, cease, discontinue )
eg:
http://localhost:631/jobs?which_jobs=all
Code: | ID Name User Size Pages State Control
KM_bizhub_C35_PPD-245 Unknown Withheld 142k 1 completed at nie, 13 maj 2018, 18:38:45 [Reprint]
|
I would run those binaries from brother (rawtobr3, brprintconflsr3) if they dont seg fault, dont say about missing libs I would say they are good with glibc.
Try prining as root ?
eg.
lpr /etc/fstab
or just:
cat file > /dev/usb/lpX ( X is some number)
( or it might be /dev/bus/usb/Y/Z)
- from[/quote][/code] cups web page log as root and try printing test page ?
- delete printer and add again via webpage ( maybe u miswrote something via command line ? )
- dunno, click whatever u can in webpage, maybe there will be some usefull message _________________ Sent from Windows |
|
Back to top |
|
|
apiaio Guru
Joined: 04 Dec 2008 Posts: 417
|
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Mon May 14, 2018 7:08 pm Post subject: |
|
|
mir3x wrote: | OK about pause, It might be just stupid message ( or maybe something is wrong in gentoo prining wiki ) ,
I have "withheld" instead paused, but its printed: ( withehld ~ stop, suspend, withhold, cease, discontinue )
|
It's ok then. Witheld, that's right, I didn't know exactly how it is called on the CUPS web-interface in English.
Quote: | Try prining as root ?
eg.
lpr /etc/fstab
or just:
cat file > /dev/usb/lpX ( X is some number)
( or it might be /dev/bus/usb/Y/Z)
cups web page log as root and try printing test page ?
- delete printer and add again via webpage ( maybe u miswrote something via command line ? )
dunno, click whatever u can in webpage, maybe there will be some usefull message |
I tried it all... |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Mon May 14, 2018 7:15 pm Post subject: |
|
|
Hi!
Happy to hear such a good news. It means that my printer is able to print in gentoo.
The best help would be if you tell me what driver exactly did you chose? If you remember of course |
|
Back to top |
|
|
apiaio Guru
Joined: 04 Dec 2008 Posts: 417
|
Posted: Mon May 14, 2018 7:47 pm Post subject: |
|
|
Cyril Graf wrote: |
The best help would be if you tell me what driver exactly did you chose? If you remember of course |
This is copy and paste from CUPS Code: | Description: Brother DCP-L2500D series
Location: Local Printer
Driver: Brother BrGenML1 for CUPS (grayscale, 2-sided printing)
Connection: usb://Brother/DCP-L2500D%20series?serial=E73915F6N597495
Defaults: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided |
|
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Tue May 15, 2018 6:33 pm Post subject: |
|
|
apiaio wrote: | Cyril Graf wrote: |
The best help would be if you tell me what driver exactly did you chose? If you remember of course |
This is copy and paste from CUPS
Code: | Description: Brother DCP-L2500D series
Location: Local Printer
Driver: Brother BrGenML1 for CUPS (grayscale, 2-sided printing)
Connection: usb://Brother/DCP-L2500D%20series?serial=E73915F6N597495
Defaults: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided |
|
Thanks!
I suppose there's no difference:
Code: | Описание: Brother DCP-L2500D series
Расположение: Локальный принтер
Драйвер: Brother BrGenML1 for CUPS (черно-белый, дуплексная печать)
Подключение: usb://Brother/DCP-L2500D%20series?serial=E73916M7N897355
По умолчанию: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided |
|
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Tue May 15, 2018 6:35 pm Post subject: |
|
|
SO maybe its all about that:
Quote: | - usb printing option in the kernel is disabled; |
apiaio How your kernel usb prining options ? _________________ Sent from Windows |
|
Back to top |
|
|
apiaio Guru
Joined: 04 Dec 2008 Posts: 417
|
Posted: Tue May 15, 2018 7:24 pm Post subject: |
|
|
mir3x wrote: | SO maybe its all about that:
Quote: | - usb printing option in the kernel is disabled; |
apiaio How your kernel usb prining options ? |
Code: | # cat /usr/src/linux/.config | grep PRINT
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_PRINTK_TIME=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_TEST_PRINTF is not set
CONFIG_EARLY_PRINTK_USB=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_BINARY_PRINTF=y
|
|
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Tue May 15, 2018 7:27 pm Post subject: |
|
|
Code: | uname -r
4.9.95-gentoo-may-2018 |
cat /usr/src/linux/.config | grep PRINT
Code: | CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_PRINTK_TIME=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_TEST_PRINTF is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_BINARY_PRINTF=y
|
|
|
Back to top |
|
|
apiaio Guru
Joined: 04 Dec 2008 Posts: 417
|
Posted: Tue May 15, 2018 7:39 pm Post subject: |
|
|
Code: | sed '/#/d' /usr/src/linux/.config | grep USB
CONFIG_USB_NET_DRIVERS=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_USB_HID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_MON=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_EARLY_PRINTK_USB=y |
Code: | uname -r
4.12.12-gentoo
|
|
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Fri May 18, 2018 5:43 pm Post subject: |
|
|
apiaio wrote: | [code]sed '/#/d' /usr/src/linux/.config | grep USB
(...) |
Well, the option values are the same, the issue probably has nothing to do with the kernel.
Thanks a lot anyway! |
|
Back to top |
|
|
Cyril Graf n00b
Joined: 01 May 2015 Posts: 25 Location: Nyen (Ingria)
|
Posted: Fri May 18, 2018 7:42 pm Post subject: |
|
|
I don't know what I did, but now even the scanner is missing by xsane, and when I try to download a driver from the brother web cite, firefox gives me an error "you have no rights to save file". Qtransmission doesn't work as well. I think I did nothing and I don't understand what happened. And maybe it is the reason why the printer doesn't printing.
The only one thing I did lately: i added a rule
/etc/polkit-1/rules.d/10-udisks.rules
Code: | polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.udisks2.filesystem-mount" && subject.isInGroup("plugdev")) {
return "yes";
}
}); |
- but if I remove it nothing is changing... (( |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|