Gentoo Forums :: View topic - Can't see my android files from computer...

Can't see my android files from computer...

View unanswered posts
View posts from last 24 hours

Goto page 1, 2 Next

Gentoo Forums Forum Index

Other Things Gentoo

View previous topic :: View next topic

Author

Message

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Tue Apr 24, 2018 6:41 pm Post subject: Can't see my android files from computer...

I have been struggling trying to properly access my Samsung S7 from my gentoo install without success for a few days now. After mounting the device I can see the folder structure inside its card memory, I can copy files into the card, but I can't neither copy nor even see any file inside the card from the gentoo install. Regarding the internal storage of the phone I just can't see anything or do anything with it. After trying, for example, to LS inside a folder in the card I first get some time with a frozen prompt for long seconds, sometimes minutes:

Code:

~> ls AndroidDevice/Card/DCIM/Camera/

Than, when the prompt is let go, the computer shows that all folders inside the phone are empty, which is not the case. An example:

Code:

~> ls AndroidDevice/Card/DCIM/Camera/
~>

If I try to access via pcmanfm I can again see all the folder structure inside the card, but again showing that all its folders are empty. I can't see anything inside the internal storage from pcmanfm. And I know that everything should be working because I am talking about the last one of my computers to be "converted" into gentoo, and up to a few months ago, when I was still running Fedora on this machine, I could access all files inside the phone, or at least see them, without any issues.

For clarification, I am mounting the device using simple-mtpfs:

Code:

~> simple-mtpfs -l
1: SamsungGalaxy models (MTP)
~> simple-mtpfs --device 1 AndroidDevice
~> ls AndroidDevice/
Card/ Phone/
~> mount | grep mtpfs
simple-mtpfs on /home/vinicius/AndroidDevice type fuse.simple-mtpfs (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
~>

and in my kerrnel I have the FUSE option properly set:

Code:

root ~ # uname -r
4.9.76-gentoo-r1
root ~ # grep "FUSE" /boot/config-4.9.76-gentoo-r1
CONFIG_FUSE_FS=y

Finally, after just mounting the phone I notice no abnormal messages in dmesg:

Code:

[ 1610.187287] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[ 1610.357573] usb 1-2: New USB device found, idVendor=04e8, idProduct=6860
[ 1610.357575] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1610.357576] usb 1-2: Product: SAMSUNG_Android
[ 1610.357577] usb 1-2: Manufacturer: SAMSUNG
[ 1610.357578] usb 1-2: SerialNumber: kl18855eee1t123256

But after some of the failed attempts of accessing its files I eventually noticed a lot of selinux denials in dmesg

Code:

[ 1444.250784] audit: type=1400 audit(1524583641.533:640): avc: denied { link } for pid=5858 comm="xauth" name=".Xauthority-c" dev="dm-2" ino=55968893 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:user_home_dir_t tclass=file permissive=1
[ 1444.250854] audit: type=1400 audit(1524583641.533:641): avc: denied { remove_name } for pid=5858 comm="xauth"
name=".Xauthority-c" dev="dm-2" ino=55968893 scontext=system_u:system_r:kernel_t tcontext=user_u:object_r:user_home_dir_t tclass=dir permissive=1
[ 1451.028263] audit: type=1400 audit(1524583648.311:642): avc: denied { read } for pid=5869 comm="mount" name="sda2" dev="devtmpfs" ino=12391 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:fixed_disk_device_t tclass=blk_file permissive=1
[ 1451.028269] audit: type=1400 audit(1524583648.311:643): avc: denied { open } for pid=5869 comm="mount" path="/dev/sda2" dev="devtmpfs" ino=12391 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:fixed_disk_device_t tclass=blk_file permissive=1
[ 1451.028303] audit: type=1400 audit(1524583648.311:644): avc: denied { ioctl } for pid=5869 comm="mount" path="/dev/sda2" dev="devtmpfs" ino=12391 ioctlcmd=0x1272 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:fixed_disk_device_t tclass=blk_file permissive=1
[ 1565.378811] audit: type=1400 audit(1524583762.661:645): avc: denied { read open } for pid=5895 comm="bash" path="/usr/bin/sudo" dev="dm-2" ino=27287868 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:sudo_exec_t tclass=file permissive=1
[ 1565.378871] audit: type=1400 audit(1524583762.661:646): avc: denied { execute_no_trans } for pid=5895 comm="bash" path="/usr/bin/sudo" dev="dm-2" ino=27287868 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:sudo_exec_t tclass=file permissive=1
[ 1565.547195] audit: type=1400 audit(1524583762.830:647): avc: denied { search } for pid=5895 comm="sudo" name="sudo" dev="dm-2" ino=26626630 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:pam_var_run_t tclass=dir permissive=1
[ 1565.547477] audit: type=1400 audit(1524583762.830:648): avc: denied { getattr } for pid=5895 comm="sudo" path="/var/db/sudo/lectured" dev="dm-2" ino=26626631 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:pam_var_run_t tclass=dir permissive=1
[ 1565.564935] audit: type=1400 audit(1524583762.847:649): avc: denied { getattr } for pid=5895 comm="sudo" path="/var/db/sudo/lectured/vinicius" dev="dm-2" ino=26607618 scontext=system_u:system_r:kernel_t tcontext=system_u:object_r:pam_var_run_t tclass=file permissive=1

But that should not mean anything since, as seen, selinux is in perrmissive mode, not in enforcing or targeted.

Thank you all for your attention.

Irre
Guru
Guru

Joined: 09 Nov 2013
Posts: 434
Location: Stockholm

Posted: Wed Apr 25, 2018 6:21 am Post subject:

I never connect my phone via cable. Instead I have installed an FTP server app. It was then easy to transfer files to and from linux.

Torro
n00b
n00b

Joined: 16 Apr 2018
Posts: 18
Location: Western Europe

Posted: Wed Apr 25, 2018 8:30 am Post subject:

I'm not familiar with the S7 but I would advise you to simply use usb debugging mode + adb pull or removable memory card + card reader unless required otherwise.

P.Kosunen
Guru
Guru

Joined: 21 Nov 2005
Posts: 309
Location: Finland

Posted: Wed Apr 25, 2018 4:34 pm Post subject:

On new Androids you have to select MTP mode from phones notifications every time you plug the cable.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Wed Apr 25, 2018 6:11 pm Post subject:

First of all thank you all for your replies. Irre: I would prefer to connect via cable, since I would like to backup regularly everything in the phone, and I am talking about more than 20gb. If I could simply run rsync it would be perfect; Torro and P.Kosunen: I enabled developer mode, and just after that I enabled either MTP mode and USB debugging mode, and the problem persists without any changes. I tried adb as well, but I confess to not know how to handle it properly. Anyway, I got the impression that it did not worked also. I also changed the usb cable, following an advice I have read somewhere else, but also without any success. I also tried to mount using the -o allow-other option from simple-mtpfs, also without any success. Thank you again.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Wed Apr 25, 2018 6:25 pm Post subject:

Well, I just tested with my wife's phone, a galaxy J7, and everything works flawlessly... So the problem is very likely in the phone, which is frustrating. A possibility would be to simple factory reset everything, and try again, but what am I going to do with all my data? Thank you all...

mv
Watchman

Joined: 20 Apr 2005
Posts: 6747

Posted: Wed Apr 25, 2018 7:23 pm Post subject:

Probably you already tried, but anyway: Sometimes just rebooting the phone helps.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Thu Apr 26, 2018 3:13 am Post subject:

mv wrote:

Probably you already tried, but anyway: Sometimes just rebooting the phone helps.

Yes mv, I tried that already without success.

Ant P.
Watchman

Joined: 18 Apr 2009
Posts: 6920

Posted: Thu Apr 26, 2018 3:20 am Post subject:

Try with the gphoto2 command line instead, its MTP driver is slightly less broken than anything else I've tried. Ignore the program's name, it can download any file type this way. It also supports PTP mode which should be 100% reliable (as long as what you want is in a folder the phone exports over PTP). (also be warned - MTP doesn't show entire directories sometimes. Not sure if that's a bug in the phone or libmtp) Last edited by Ant P. on Thu Apr 26, 2018 3:22 am; edited 2 times in total

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Thu Apr 26, 2018 3:21 am Post subject:

Well, I guess I did some advance here... I was checking my phone folders and I noticed a lot of files called .nomedia, all over the phone. Than I remembered that I was the one who put most of them there in the first place, and I did it because that was a workaround to make the native music player of adroid to never look at those folders for sound files. That worked, but I had to put .nomedia in every folder in which there was a sound file that I did not wanted to show up in the music player. After removing ALL of those .nomedia files (one of them I could not remove, the system wont allow), than I could see nearly all files in all folders after mounting, and copy them into the gentoo install. However one of the folders, the one containing all camera shots and located in the card, I still cant access. It is a huge folder in size, with more than 20gb, so it may be something related with its size.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Thu Apr 26, 2018 3:25 am Post subject:

Ant P. wrote:

Try with the gphoto2 command line instead, its MTP driver is slightly less broken than anything else I've tried. Ignore the program's name, it can download any file type this way. It also supports PTP mode which should be 100% reliable (as long as what you want is in a folder the phone exports over PTP).

(also be warned - MTP doesn't show entire directories sometimes. Not sure if that's a bug in the phone or libmtp)

Thank you Ant. P, I will try it and let you know.

Torro
n00b
n00b

Joined: 16 Apr 2018
Posts: 18
Location: Western Europe

Posted: Thu Apr 26, 2018 9:19 am Post subject:

If Ant P's suggestion doesn't pan out please try this: mkdir and cd into a new directory of your choice (just a precaution). Enable USB debugging mode on your S7, connect (by USB cable) to your Gentoo system. Execute adb usb on your Gentoo install. adb devices should show your s7 as a connected device now. Assuming your files are in /Card/DCIM/Camera execute adb pull /Card/DCIM/Camera . After you're done with adb, execute adb kill-server to stop the adb daemon. Disable usb debugging on your S7. Let me know if this works for you. You can open a shell on your S7 by executing adb shell if you like. for more info on adb have a look at adb help (e.g. adb help 2>&1 \| less) and the Gentoo Wiki: Android/adb .

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Fri Apr 27, 2018 6:26 pm Post subject:

Ant P.:

Quote:

I installed gphoto, and did everything the wiki told me to and a little more: 1) I first added USE="gphoto 2" to USE in /etc/portage/make.conf; 2) added CAMERAS="samsung" in /etc/portage/make.conf; 3) did a world update 4) installed gphoto2 with serial as local use flag; 5) rebooted the computer.

Than when I connected the phone to the machine a pop up immediately show up asking which program should I use, and I choose an archive manager (pcmanfm in my case). Then I navigated to Card/DCIM/Camera but, after long seconds loading, It returned a I/O error. After that I unmounted the phone from pcmanfm. After that I was not able to open gphoto2 anymore, it shows no connected device via gphoto2 --auto-detect and it just does not pop up again. I cant reboot the PC right now, but in a few hours I might repeat this whole process.

Torro:

Quote:

If Ant P's suggestion doesn't pan out please try this:

mkdir and cd into a new directory of your choice (just a precaution).
Enable USB debugging mode on your S7, connect (by USB cable) to your Gentoo system.
Execute adb usb on your Gentoo install.
adb devices should show your s7 as a connected device now.
Assuming your files are in /Card/DCIM/Camera execute adb pull /Card/DCIM/Camera .
After you're done with adb, execute adb kill-server to stop the adb daemon.
Disable usb debugging on your S7.

Let me know if this works for you.

So after gphoto2 failed, I connected the phone and run the commands as shown below:

Code:

~> adb usb
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
restarting in USB mode
~> adb devices
List of devices attached
kl18855eee1t123256 device

~> adb shell
herolte:/ $ ls
acct init.usb.configfs.rc
bugreports init.usb.rc
cache init.wifi.rc
config init.zygote32.rc
cpefs init.zygote64_32.rc
d knox_data
data lib
default.prop mnt
dev oem
efs persdata
etc postrecovery.do
factory preload
file_contexts.bin proc
fstab.goldfish property_contexts
fstab.ranchu publiccert.pem
fstab.samsungexynos8890 root
fstab.samsungexynos8890.fwup sbin
init sdcard
init.baseband.rc seapp_contexts
init.container.rc sepolicy
init.environ.rc sepolicy_version
init.goldfish.rc service_contexts
init.gps.rc storage
init.ranchu.rc sys
init.rc system
init.rilchip.rc ueventd.goldfish.rc
init.rilepdg.rc ueventd.ranchu.rc
init.rilmptcp.rc ueventd.rc
init.samsungexynos8890.rc ueventd.samsungexynos8890.rc
init.samsungexynos8890.usb.rc vendor
herolte:/ $

As you can see it apparently works, except by the fact that it does not shows my sdcard, since the sdcard shown is not actually the external card.

Torro
n00b
n00b

Joined: 16 Apr 2018
Posts: 18
Location: Western Europe

Posted: Sat Apr 28, 2018 8:56 am Post subject:

Have a look at the /mnt directory. Perhaps your SD card is mounted under /mnt/extSdCard or /mnt/external_sd ?

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Mon Apr 30, 2018 2:17 am Post subject:

No, apparently it is not there. Have a look:

Code:

1|herolte:/ $ ls mnt/
appfuse asec expand knox media_rw obb runtime sdcard secure shell user
herolte:/ $ ls mnt/sdcard/DCIM/Camera/
20170327_093916_001.jpg 20170624_081734_002.jpg 20170801_173414_001.jpg
20170624_080940_001.jpg 20170624_081734_003.jpg 20170827_171812_001.jpg
20170624_080940_002.jpg 20170624_081734_004.jpg 20171230_174516_001.jpg
20170624_080940_003.jpg 20170624_081734_005.jpg 20171230_174516_002.jpg
20170624_080940_004.jpg 20170624_081734_006.jpg 20171230_174516_003.jpg
20170624_080940_005.jpg 20170624_081734_007.jpg 20171230_174516_004.jpg
20170624_080940_006.jpg 20170624_081734_008.jpg 20171230_174516_005.jpg
20170624_080940_007.jpg 20170624_081734_009.jpg 20171230_174516_006.jpg
20170624_080940_008.jpg 20170624_081734_010.jpg 20171230_174516_007.jpg
20170624_080940_009.jpg 20170624_081734_011.jpg 20171230_174516_008.jpg
20170624_080940_010.jpg 20170624_081734_012.jpg 20171230_174516_009.jpg
20170624_080940_011.jpg 20170624_081734_013.jpg
20170624_081734_001.jpg 20170722_172303_001.jpg
herolte:/ $ ls sdcard/DCIM/Camera/
20170327_093916_001.jpg 20170624_081734_002.jpg 20170801_173414_001.jpg
20170624_080940_001.jpg 20170624_081734_003.jpg 20170827_171812_001.jpg
20170624_080940_002.jpg 20170624_081734_004.jpg 20171230_174516_001.jpg
20170624_080940_003.jpg 20170624_081734_005.jpg 20171230_174516_002.jpg
20170624_080940_004.jpg 20170624_081734_006.jpg 20171230_174516_003.jpg
20170624_080940_005.jpg 20170624_081734_007.jpg 20171230_174516_004.jpg
20170624_080940_006.jpg 20170624_081734_008.jpg 20171230_174516_005.jpg
20170624_080940_007.jpg 20170624_081734_009.jpg 20171230_174516_006.jpg
20170624_080940_008.jpg 20170624_081734_010.jpg 20171230_174516_007.jpg
20170624_080940_009.jpg 20170624_081734_011.jpg 20171230_174516_008.jpg
20170624_080940_010.jpg 20170624_081734_012.jpg 20171230_174516_009.jpg
20170624_080940_011.jpg 20170624_081734_013.jpg
20170624_081734_001.jpg 20170722_172303_001.jpg

You can see the contents of mnt/, and there is nothing resembling an external sdcard, except for the folder sdcard itself. However, as you can also see, the subfolder mnt/sdcard/ is the same as the folder sdcard/, as illustrated by the contents of the subfolders mnt/sdcard/DCIM/Camera/ and sdcard/DCIM/Camera/.

Torro
n00b
n00b

Joined: 16 Apr 2018
Posts: 18
Location: Western Europe

Posted: Tue May 01, 2018 8:19 am Post subject:

You'll have to find the correct location of the files yourself if you want to use adb. At the moment I'd suggest taking the external card from your phone and using a card reader that's connected to your PC to see if you can read the files from it.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Tue May 01, 2018 3:54 pm Post subject:

Torro wrote:

You'll have to find the correct location of the files yourself if you want to use adb.

But is there a way of doing this? I mean, looking at the phone storage either from android or from adb is there a way of locating the extcard? All I know, because of the directory structure show after mounting the phone with simple-mtpfs, is that the card appears to be at the same directory level as the internal storage, but I am not sure...

Torro wrote:

At the moment I'd suggest taking the external card from your phone and using a card reader that's connected to your PC to see if you can read the files from it.

I am not sure that will be possible, my extcard is encrypted, and I dont think I have either the key of the passphrase, I think the key is generated automatically and stored somewhere inside the phone when you choose to encrypt the extcard.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Tue May 01, 2018 5:19 pm Post subject:

Oh, and, by the way, I have looked inside all folders show by adb shell, and no sign of the extcard there...

Ant P.
Watchman

Joined: 18 Apr 2009
Posts: 6920

Posted: Tue May 01, 2018 7:36 pm Post subject:

vcmota wrote:

It's very unlikely your phone speaks the proprietary samsung camera protocol or has an RS232 port; did you leave ptp2 enabled? Is your phone set to MTP/PTP mode when you run that command?

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Tue May 01, 2018 9:42 pm Post subject:

Ant P. wrote:

did you leave ptp2 enabled?

I dont know, how do I check that?

Ant P. wrote:

Is your phone set to MTP/PTP mode when you run that command?

I guess it is, at least is what is shown in the notifications...

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Wed May 02, 2018 11:46 am Post subject:

Torro wrote:

You'll have to find the correct location of the files yourself if you want to use adb.

At the moment I'd suggest taking the external card from your phone and using a card reader that's connected to your PC to see if you can read the files from it.

It worked, partially, but it dit! Well, the external card was located inside "storage/F0FF-1D06/", and the command

Code:

adb pull storage/F0FF-1D06

worked perfectly. I guess I did not found it on the first time because doing LS inside the subfolder "storage" returned "F0FF-1D06 Private emulated enc_emulated self", and I taught that was an error message or something. So I finally managed to recover into my laptop all pictures and movies made with the camera, which as my goal in the first place.

However I still can't see the contents of this folder neither from terminal (the standard "ls Card/DCIM/Camera" does not work) nor from pcmamfm (when I click on the folder it just stalls and I have to change into "Charging mode" in my android as the only way to unlock pcmanfm). Using gphoto2 also does not work, now at least I can get an error message:

Code:

~> gphoto2 --auto-detect
Model Port
----------------------------------------------------------
Samsung Galaxy models (MTP) usb:001,072
~> cd AndroidDevice/
AndroidDevice> gphoto2 --get-all-files

*** Error ***
PTP General Error
*** Error (-1: 'Unspecified error') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:

env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --get-all-files

Please make sure there is sufficient quoting around the arguments.

AndroidDevice>gphoto2 --debug --get-all-files
0.000057 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000122 main (2): gphoto2 2.5.15
0.000159 main (2): gphoto2 has been compiled with the following options:
0.000187 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000218 main (2): + popt (mandatory, for handling command-line parameters)
0.000245 main (2): + no exif (for displaying EXIF information)
0.000272 main (2): + no cdk (for accessing configuration options)
0.000300 main (2): + no aa (for displaying live previews)
0.000327 main (2): + no jpeg (for displaying live previews in JPEG format)
0.000356 main (2): + readline (for easy navigation in the shell)
0.000384 main (2): libgphoto2 2.5.16
0.000412 main (2): libgphoto2 has been compiled with the following options:
0.000444 main (2): + INCOMPLETE CAMLIB SET (ptp2 samsung)
0.000470 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000496 main (2): + ltdl (for portable loading of camlibs)
0.000522 main (2): + no EXIF (for special handling of EXIF files)
0.000550 main (2): libgphoto2_port 0.12.0
0.000577 main (2): libgphoto2_port has been compiled with the following
options:
0.000607 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi
0.000637 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000665 main (2): + ltdl (for portable loading of iolibs)
0.000691 main (2): + USB (libusb1, for USB cameras)
0.000717 main (2): + serial (for serial cameras)
0.000744 main (2): + no resmgr (serial port access and locking)
0.000771 main (2): + no ttylock (serial port locking)
0.000798 main (2): + lockdev (serial port locking)
0.000825 main (2): CAMLIBS env var not set, using compile-time default instead
0.000855 main (2): IOLIBS env var not set, using compile-time default instead
0.000885 main (2): invoked with following arguments:
0.000912 main (2): --debug
0.000938 main (2): --get-all-files
0.000982 load_settings (2): Creating gphoto config directory ('/home/vinicius/.gphoto')
0.001087 load_settings (2): Loading settings from file '/home/vinicius/.gphoto/settings'.
0.001186 main (2): The user has not specified both a model and a port. Try to figure them out.
0.001245 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib64/libgphoto2_port/0.12.0'...
0.001349 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.001608 gp_port_library_list (2): found mtab fsname proc
0.001653 gp_port_library_list (2): found mtab fsname udev
0.001689 gp_port_library_list (2): found mtab fsname devpts
0.001719 gp_port_library_list (2): found mtab fsname sysfs
0.001748 gp_port_library_list (2): found mtab fsname /dev/mapper/vg0-lvol1
0.001779 gp_port_library_list (2): found mtab fsname selinuxfs
0.001818 gp_port_library_list (2): found mtab fsname tmpfs
0.001853 gp_port_library_list (2): found mtab fsname mqueue
0.001883 gp_port_library_list (2): found mtab fsname shm
0.001922 gp_port_library_list (2): found mtab fsname debugfs
0.001956 gp_port_library_list (2): found mtab fsname fusectl
0.001986 gp_port_library_list (2): found mtab fsname cgroup_root
0.002015 gp_port_library_list (2): found mtab fsname openrc
0.002102 gp_port_library_list (2): found mtab fsname none
0.002155 gp_port_library_list (2): found mtab fsname cpuset
0.002194 gp_port_library_list (2): found mtab fsname cpu
0.002232 gp_port_library_list (2): found mtab fsname cpuacct
0.002269 gp_port_library_list (2): found mtab fsname freezer
0.002306 gp_port_library_list (2): found mtab fsname binfmt_misc
0.002347 gp_port_library_list (2): found mtab fsname none
0.002414 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.002451 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002596 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002635 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002665 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005777 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/u
sr/lib64/libgphoto2_port/0.12.0/serial'.
0.005866 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005898 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005929 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005960 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005991 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015321 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015384 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,004') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015418 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,002') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015451 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,072') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015484 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbdiskdirect'.
0.015756 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbscsi'.
0.015945 gp_port_info_list_count (2): Counting entries (13 available)...
0.015998 gp_port_info_list_count (2): 9 regular entries available.
0.016032 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib64/libgphoto2/2.5.16'...
0.016094 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/ptp2'.
0.016127 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/samsung'.
0.016166 gp_abilities_list_load_dir (2): Found 2 camera drivers.
0.031054 gp_port_info_list_count (2): Counting entries (13 available)...
0.034860 gp_port_info_list_count (2): 9 regular entries available.
0.034910 gp_port_new (2): Creating new device...
0.034942 gp_port_info_list_get_info (2): Getting info of entry 0 (13 available)...
0.035080 gp_port_set_settings (2): Setting settings...
0.035120 gp_port_info_list_get_info (2): Getting info of entry 1 (13 available)...
0.038921 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.038996 gp_port_set_settings (2): Setting settings...
0.039027 gp_port_info_list_get_info (2): Getting info of entry 2 (13 available)...
0.039269 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039311 gp_port_set_settings (2): Setting settings...
0.039341 gp_port_info_list_get_info (2): Getting info of entry 3 (13 available)...
0.039531 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039571 gp_port_set_settings (2): Setting settings...
0.039601 gp_port_info_list_get_info (2): Getting info of entry 4 (13 available)...
0.039788 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039827 gp_port_set_settings (2): Setting settings...
0.039857 gp_port_info_list_get_info (2): Getting info of entry 5 (13 available)...
0.040071 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.040110 gp_port_set_settings (2): Setting settings...
0.040144 gp_port_info_list_get_info (2): Getting info of entry 6 (13 available)...
0.049272 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.049346 gp_port_set_settings (2): Setting settings...
0.049375 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,004, (new int=0, conf=-1, alt=-1) port usb:001,004

0.000057 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000122 main (2): gphoto2 2.5.15
0.000159 main (2): gphoto2 has been compiled with the following options:
0.000187 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000218 main (2): + popt (mandatory, for handling command-line parameters)
0.000245 main (2): + no exif (for displaying EXIF information)
0.000272 main (2): + no cdk (for accessing configuration options)
0.000300 main (2): + no aa (for displaying live previews)
0.000327 main (2): + no jpeg (for displaying live previews in JPEG format)
0.000356 main (2): + readline (for easy navigation in the shell)
0.000384 main (2): libgphoto2 2.5.16
0.000412 main (2): libgphoto2 has been compiled with the following options:
0.000444 main (2): + INCOMPLETE CAMLIB SET (ptp2 samsung)
0.000470 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000496 main (2): + ltdl (for portable loading of camlibs)
0.000522 main (2): + no EXIF (for special handling of EXIF files)
0.000550 main (2): libgphoto2_port 0.12.0
0.000577 main (2): libgphoto2_port has been compiled with the following
options:
0.000607 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi
0.000637 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000665 main (2): + ltdl (for portable loading of iolibs)
0.000691 main (2): + USB (libusb1, for USB cameras)
0.000717 main (2): + serial (for serial cameras)
0.000744 main (2): + no resmgr (serial port access and locking)
0.000771 main (2): + no ttylock (serial port locking)
0.000798 main (2): + lockdev (serial port locking)
0.000825 main (2): CAMLIBS env var not set, using compile-time default instead
0.000855 main (2): IOLIBS env var not set, using compile-time default instead
0.000885 main (2): invoked with following arguments:
0.000912 main (2): --debug
0.000938 main (2): --get-all-files
0.000982 load_settings (2): Creating gphoto config directory ('/home/vinicius/.gphoto')
0.001087 load_settings (2): Loading settings from file '/home/vinicius/.gphoto/settings'.
0.001186 main (2): The user has not specified both a model and a port. Try to figure them out.
0.001245 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib64/libgph
oto2_port/0.12.0'...
0.001349 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.001608 gp_port_library_list (2): found mtab fsname proc
0.001653 gp_port_library_list (2): found mtab fsname udev
0.001689 gp_port_library_list (2): found mtab fsname devpts
0.001719 gp_port_library_list (2): found mtab fsname sysfs
0.001748 gp_port_library_list (2): found mtab fsname /dev/mapper/vg0-lvol1
0.001779 gp_port_library_list (2): found mtab fsname selinuxfs
0.001818 gp_port_library_list (2): found mtab fsname tmpfs
0.001853 gp_port_library_list (2): found mtab fsname mqueue
0.001883 gp_port_library_list (2): found mtab fsname shm
0.001922 gp_port_library_list (2): found mtab fsname debugfs
0.001956 gp_port_library_list (2): found mtab fsname fusectl
0.001986 gp_port_library_list (2): found mtab fsname cgroup_root
0.002015 gp_port_library_list (2): found mtab fsname openrc
0.002102 gp_port_library_list (2): found mtab fsname none
0.002155 gp_port_library_list (2): found mtab fsname cpuset
0.002194 gp_port_library_list (2): found mtab fsname cpu
0.002232 gp_port_library_list (2): found mtab fsname cpuacct
0.002269 gp_port_library_list (2): found mtab fsname freezer
0.002306 gp_port_library_list (2): found mtab fsname binfmt_misc
0.002347 gp_port_library_list (2): found mtab fsname none
0.002414 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.002451 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002596 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002635 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.002665 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005777 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005832 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005866 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005898 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005929 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005960 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.005991 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015321 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015384 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,004') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015418 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,002') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015451 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,072') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.015484 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbdiskdirect'.
0.015756 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbscsi'.
0.015945 gp_port_info_list_count (2): Counting entries (13 available)...
0.015998 gp_port_info_list_count (2): 9 regular entries available.
0.016032 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib64/libgphoto2/2.5.16'...
0.016094 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/ptp2'.
0.016127 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/samsung'.
0.016166 gp_abilities_list_load_dir (2): Found 2 camera drivers.
0.031054 gp_port_info_list_count (2): Counting entries (13 available)...
0.034860 gp_port_info_list_count (2): 9 regular entries available.
0.034910 gp_port_new (2): Creating new device...
0.034942 gp_port_info_list_get_info (2): Getting info of entry 0 (13 available)...
0.035080 gp_port_set_settings (2): Setting settings...
0.035120 gp_port_info_list_get_info (2): Getting info of entry 1 (13 available)...
0.038921 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.038996 gp_port_set_settings (2): Setting settings...
0.039027 gp_port_info_list_get_info (2): Getting info of entry 2 (13 available)...
0.039269 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039311 gp_port_set_settings (2): Setting settings...
0.039341 gp_port_info_list_get_info (2): Getting info of entry 3 (13 available)...
0.039531 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039571 gp_port_set_settings (2): Setting settings...
0.039601 gp_port_info_list_get_info (2): Getting info of entry 4 (13 available)...
0.039788 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.039827 gp_port_set_settings (2): Setting settings...
0.039857 gp_port_info_list_get_info (2): Getting info of entry 5 (13 available)...
0.040071 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.040110 gp_port_set_settings (2): Setting settings...
0.040144 gp_port_info_list_get_info (2): Getting info of entry 6 (13 available)...
0.049272 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.049346 gp_port_set_settings (2): Setting settings...
0.049375 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,004, (new int=0, conf=-1, alt=-1) port usb:001,004
0.049404 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.049432 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.049912 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.050338 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.050426 gp_port_info_list_get_info (2): Getting info of entry 7 (13 available)...
0.052455 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.052520 gp_port_set_settings (2): Setting settings...
0.052553 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
0.052587 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.052619 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.055659 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.056026 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.056086 gp_port_info_list_get_info (2): Getting info of entry 8 (13 available)...
0.070629 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.070640 gp_port_set_settings (2): Setting settings...
0.070647 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,072, (new i
nt=0, conf=-1, alt=-1) port usb:001,072
0.070651 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.070655 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.071134 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.071322 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4e8, product 0x6860)... found.
0.071378 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting
0, inep 81, outep 01, intep 82, class 06, subclass 01
0.071383 gp_abilities_list_detect_usb(2): Found 'Samsung Galaxy models (MTP)' (0x4e8,0x6860)
0.071390 gp_port_free (2): Freeing port...
0.071393 gp_port_close (2): Closing port...
0.072599 gp_camera_set_abilities (2): Setting abilities ('Samsung Galaxy models (MTP)')...
0.072660 gp_setting_set (2): Setting key 'model' to value 'Samsung Galaxy models (MTP)' (gphoto2)
0.072696 save_settings (2): Saving 2 setting(s) to file "/home/vinicius/.gphoto/settings"
0.072860 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,072' (13 entries available)...
0.072897 gp_port_info_list_get_info (2): Getting info of entry 8 (13 available)...
0.072925 gp_camera_set_port_info (2): Setting port info for port 'Universal Serial Bus' at
'usb:001,072'...
0.075578 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.076312 gp_port_set_settings (2): Setting settings...
0.076350 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,072, (new int=0, conf=-1, alt=-1) port usb:001,072
0.076383 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.076413 gp_setting_set (2): Setting key 'port' to value 'usb:001,072' (gphoto2)
0.076442 save_settings (2): Saving 2 setting(s) to file "/home/vinicius/.gphoto/settings"
0.076624 gp_camera_folder_list_files (2): Listing files in '/'...
0.076670 gp_camera_init (2): Initializing camera...
0.076713 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4e8, product 0x6860)... found.
0.076800 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting
0, inep 81, outep 01, intep 82, class 06, subclass 01
0.076841 gp_camera_init (2): Loading '/usr/lib64/libgphoto2/2.5.16/ptp2'...
0.077682 gp_port_open (2): Opening USB port...
0.077740 gp_libusb1_open (2): ()
0.077787 gp_libusb1_open (2): claiming interface 0
0.077877 camera_init (2): maxpacketsize 512
0.077915 gp_port_set_timeout (2): Setting port timeout to 8000 milliseconds.
0.077952 ptp (2): PTP: Opening session
0.077998 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open session) (0x1) request...
0.078030 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.078118 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................

0.078127 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open session) response...
0.078131 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.082447 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-00 00 00 00 ....... ....
0.082463 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds.
0.082473 ptp_usb_sendreq (2): Sending PTP_OC 0x1001 (Get device info) request...
0.082476 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.082563 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 01 10-01 00 00 00 ............

0.082572 ptp_usb_getdata (2): Reading PTP_OC 0x1001 (Get device info) data...
0.082576 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.089222 gp_port_read (3): Read 615 = 0x267 out of 1024 bytes from port: (hexdump of 615 bytes)
0000 67 02 00 00 02 00 01 10-01 00 00 00 64 00 06 00 g...........d...
0010 00 00 64 00 92 6d 00 69-00 63 00 72 00 6f 00 73 ..d..m.i.c.r.o.s
0020 00 6f 00 66 00 74 00 2e-00 63 00 6f 00 6d 00 3a .o.f.t...c.o.m.:
0030 00 20 00 31 00 2e 00 30-00 3b 00 20 00 6d 00 69 . .1...0.;. .m.i
0040 00 63 00 72 00 6f 00 73-00 6f 00 66 00 74 00 2e .c.r.o.s.o.f.t..
0050 00 63 00 6f 00 6d 00 2f-00 57 00 4d 00 50 00 50 .c.o.m./.W.M.P.P
0060 00 44 00 3a 00 20 00 31-00 31 00 2e 00 30 00 3b .D.:. .1.1...0.;
0070 00 20 00 6d 00 69 00 63-00 72 00 6f 00 73 00 6f . .m.i.c.r.o.s.o
0080 00 66 00 74 00 2e 00 63-00 6f 00 6d 00 2f 00 57 .f.t...c.o.m./.W
0090 00 4d 00 50 00 50 00 44-00 3a 00 20 00 31 00 30 .M.P.P.D.:. .1.0
00a0 00 2e 00 30 00 3b 00 73-00 61 00 6d 00 73 00 75 ...0.;.s.a.m.s.u
00b0 00 6e 00 67 00 2e 00 63-00 6f 00 6d 00 2f 00 6b .n.g...c.o.m./.k
00c0 00 69 00 65 00 73 00 3a-00 34 00 2e 00 31 00 3b .i.e.s.:.4...1.;
00d0 00 73 00 61 00 6d 00 73-00 75 00 6e 00 67 00 2e .s.a.m.s.u.n.g..
00e0 00 63 00 6f 00 6d 00 2f-00 64 00 65 00 76 00 69 .c.o.m./.d.e.v.i
00f0 00 63 00 65 00 73 00 74-00 61 00 74 00 75 00 73 .c.e.s.t.a.t.u.s
0100 00 3a 00 33 00 3b 00 73-00 61 00 6d 00 73 00 75 .:.3.;.s.a.m.s.u
0110 00 6e 00 67 00 2e 00 63-00 6f 00 6d 00 2f 00 73 .n.g...c.o.m./.s
0120 00 69 00 64 00 65 00 73-00 79 00 6e 00 63 00 33 .i.d.e.s.y.n.c.3
0130 00 2e 00 31 00 3b 00 00-00 00 00 26 00 00 00 01 ...1.;.....&....
0140 10 02 10 03 10 04 10 05-10 06 10 07 10 08 10 09 ................
0150 10 0b 10 0c 10 0d 10 14-10 15 10 16 10 1b 10 10 ................
0160 98 11 98 02 98 01 98 03-98 04 98 05 98 06 98 01 ................
0170 92 02 92 0a 10 11 10 12-10 17 10 19 10 1a 10 07 ................
0180 98 08 98 01 95 02 95 03-95 04 95 05 00 00 00 02 ................
0190 40 03 40 04 40 05 40 0c-40 06 00 00 00 01 50 01 @.@.@.@.@.....P.
01a0 d4 02 d4 04 d4 07 d4 05-d4 00 00 00 00 17 00 00 ................
01b0 00 84 b9 85 b9 09 30 01-b9 81 b9 01 38 01 30 05 ......0.....8.0.
01c0 ba 00 30 06 b9 08 b9 07-38 04 38 0b 38 0a 30 0b ..0.....8.8.8.0.
01d0 30 0c 30 82 b9 00 38 80-b9 10 ba 11 ba 03 ba 1e 0.0...8.........
01e0 53 00 61 00 6d 00 73 00-75 00 6e 00 67 00 20 00 S.a.m.s.u.n.g. .
01f0 45 00 6c 00 65 00 63 00-74 00 72 00 6f 00 6e 00 E.l.e.c.t.r.o.n.
0200 69 00 63 00 73 00 20 00-43 00 6f 00 2e 00 2c 00 i.c.s. .C.o...,.
0210 20 00 4c 00 74 00 64 00-2e 00 00 00 09 53 00 4d .L.t.d......S.M
0220 00 2d 00 47 00 39 00 33-00 30 00 46 00 00 00 0e .-.G.9.3.0.F....
0230 47 00 39 00 33 00 30 00-46 00 58 00 58 00 55 00 G.9.3.0.F.X.X.U.
0240 32 00 44 00 52 00 42 00-37 00 00 00 0c 52 00 51 2.D.R.B.7....R.Q
0250 00 38 00 48 00 42 00 30-00 4b 00 42 00 5a 00 32 .8.H.B.0.K.B.Z.2
0260 00 57 00 00 00 00 00 - .W.....

0.089262 ptp_usb_getresp (2): Reading PTP_OC 0x1001 (Get device info) response...
0.089267 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.090097 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-01 00 00 00 ....... ....

0.090122 print_debug_deviceinfo (2): Device info:
0.090127 print_debug_deviceinfo (2): Manufacturer: Samsung Electronics Co., Ltd.
0.090129 print_debug_deviceinfo (2): Model: SM-G930F
0.090131 print_debug_deviceinfo (2): device version: G930FXXU2DRB7
0.090134 print_debug_deviceinfo (2): serial number: 'OI4KJH7SH0O'
0.090136 print_debug_deviceinfo (2): Vendor extension ID: 0x00000003
0.090144 print_debug_deviceinfo (2): Vendor extension version: 100
0.090148 print_debug_deviceinfo (2): Vendor extension description: microsoft.com: 1.0; microsoft.com/WMPPD: 11.0; microsoft.com/WMPPD: 10.0;samsung.com/kies:4.1;samsung.com/devicestatus:3;samsung.com/sidesync3.1;
0.090151 print_debug_deviceinfo (2): Functional Mode: 0x0000
0.090153 print_debug_deviceinfo (2): PTP Standard Version: 100
0.090155 print_debug_deviceinfo (2): Supported operations:
0.090162 print_debug_deviceinfo (2): 0x1001 (Get device info)
0.090165 print_debug_deviceinfo (2): 0x1002 (Open session)
0.090168 print_debug_deviceinfo (2): 0x1003 (Close session)
0.090171 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
0.090174 print_debug_deviceinfo (2): 0x1005 (Get storage info)
0.090177 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
0.090180 print_debug_deviceinfo (2): 0x1007 (Get object handles)
0.090183 print_debug_deviceinfo (2): 0x1008 (Get object info)
0.090186 print_debug_deviceinfo (2): 0x1009 (Get object)
0.090190 print_debug_deviceinfo (2): 0x100b (Delete object)
0.090193 print_debug_deviceinfo (2): 0x100c (Send object info)
0.090196 print_debug_deviceinfo (2): 0x100d (Send object)
0.090199 print_debug_deviceinfo (2): 0x1014 (Get device property description)
0.090202 print_debug_deviceinfo (2): 0x1015 (Get device property value)
0.090205 print_debug_deviceinfo (2): 0x1016 (Set device property value)
0.090208 print_debug_deviceinfo (2): 0x101b (Get partial object)
0.090211 print_debug_deviceinfo (2): 0x9810 (Get object references)
0.090214 print_debug_deviceinfo (2): 0x9811 (Set object references)
0.090217 print_debug_deviceinfo (2): 0x9802 (Get object property description)
0.090220 print_debug_deviceinfo (2): 0x9801 (Get object properties supported)
0.090223 print_debug_deviceinfo (2): 0x9803 (Get object property value)
0.090226 print_debug_deviceinfo (2): 0x9804 (Set object property value)
0.090229 print_debug_deviceinfo (2): 0x9805 (Get object property list)
0.090232 print_debug_deviceinfo (2): 0x9806 (Set object property list)
0.090235 print_debug_deviceinfo (2): 0x9201 (Report Added/Deleted Items)
0.090238 print_debug_deviceinfo (2): 0x9202 (Report Acquired Items)
0.090240 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
0.090244 print_debug_deviceinfo (2): 0x1011 (Self test device)
0.090247 print_debug_deviceinfo (2): 0x1012 (Set object protection)
0.090250 print_debug_deviceinfo (2): 0x1017 (Reset device property value)
0.090252 print_debug_deviceinfo (2): 0x1019 (Move object)
0.090255 print_debug_deviceinfo (2): 0x101a (Copy object)
0.090258 print_debug_deviceinfo (2): 0x9807 (Get interdependent property description)
0.090261 print_debug_deviceinfo (2): 0x9808 (Send object property list)
0.090264 print_debug_deviceinfo (2): 0x9501 (Unknown PTP_OC)
0.090267 print_debug_deviceinfo (2): 0x9502 (Unknown PTP_OC)
0.090270 print_debug_deviceinfo (2): 0x9503 (Unknown PTP_OC)
0.090272 print_debug_deviceinfo (2): 0x9504 (Unknown PTP_OC)
0.090274 print_debug_deviceinfo (2): Events Supported:
0.090276 print_debug_deviceinfo (2): 0x4002
0.090278 print_debug_deviceinfo (2): 0x4003
0.090280 print_debug_deviceinfo (2): 0x4004
0.090282 print_debug_deviceinfo (2): 0x4005
0.090284 print_debug_deviceinfo (2): 0x400c
0.090286 print_debug_deviceinfo (2): Device Properties Supported:
0.090288 print_debug_deviceinfo (2): 0x5001
0.090290 print_debug_deviceinfo (2): 0xd401
0.090292 print_debug_deviceinfo (2): 0xd402
0.090293 print_debug_deviceinfo (2): 0xd404
0.090296 print_debug_deviceinfo (2): 0xd407
0.090298 print_debug_deviceinfo (2): 0xd405
0.090302 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage IDs) request...
0.090306 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.090627 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 04 10-02 00 00 00 ............

0.090640 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage IDs) data...
0.090644 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.090819 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-02 00 00 00 ....... ....

0.090832 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage IDs) response...
0.090835 ptp_usb_getpacket (2): Returning previously buffered response packet.
0.090839 ptp_list_folder (2): (storage=0xffffffff, handle=0xffffffff)
0.090841 ptp_list_folder (2): Listing ...
0.090846 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object handles) (0xffffffff,0x0,0xffffffff) request...
0.090849 gp_port_write (3): Writing 24 = 0x18 bytes to port...
0.090936 gp_port_write (3): Wrote 24 = 0x18 bytes to port: (hexdump of 24 bytes)
0000 18 00 00 00 01 00 07 10-03 00 00 00 ff ff ff ff ................
0010 00 00 00 00 ff ff ff ff- ........

0.090946 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object handles) data...
0.090949 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.092293 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 02 20-03 00 00 00 ....... ....

0.092315 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object handles) response...
0.092319 ptp_usb_getpacket (2): Returning previously buffered response packet.
0.092323 ptp_usb_getresp [usb.c:466] (0): PTP_OC 0x1007 receiving resp failed: PTP General Error (0x2002)
0.092329 gp_filesystem_list_files (2): Listing files in /
0.092332 lookup_folder (2): Lookup folder '/'...
0.092335 lookup_folder (2): Found! / is 0x55d9af2a2320
0.092337 gp_filesystem_list_files (2): Querying folder /...
0.092339 delete_all_files (2): Delete all files in folder 0x55d9af2a2320//
0.092342 file_list_func (2): file_list_func(/)
0.092345 gp_camera_folder_list_folders(2): Listing folders in '/'...
0.092348 gp_filesystem_list_folders (2): Listing folders in /
0.092351 lookup_folder (2): Lookup folder '/'...
0.092353 lookup_folder (2): Found! / is 0x55d9af2a2320
0.092355 gp_filesystem_list_folders (2): ... is dirty, getting from camera
0.092357 folder_list_func (2): folder_list_func(/)
0.092362 delete_all_folders (2): Internally deleting all folders from '/'...
0.092365 lookup_folder (2): Lookup folder '/'...
0.092367 lookup_folder (2): Found! / is 0x55d9af2a2320
0.092370 recurse_delete_folder (2): Recurse delete folder 0x55d9af2a2320//
0.092372 append_folder_one (2): Append one folder store_00010001
0.092372 append_folder_one (2): Append one folder store_00010001
0.092375 gp_filesystem_list_folders (2): Folder / contains 1 subfolders.
0.092379 gp_camera_folder_list_files (2): Listing files in '/store_00010001'...
0.092382 gp_filesystem_list_files (2): Listing files in /store_00010001
0.092384 lookup_folder (2): Lookup folder '/store_00010001'...
0.092386 gp_filesystem_list_files (2): Querying folder /store_00010001...
0.092389 delete_all_files (2): Delete all files in folder 0x55d9af2a7ac0/store_00010001
0.092391 file_list_func (2): file_list_func(/store_00010001)
0.092395 ptp_list_folder (2): (storage=0x00010001, handle=0x00000000)
0.092398 ptp_list_folder (2): Listing ...
0.092404 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object handles) (0x10001,0x0,0xffffffff) request...
0.092407 gp_port_write (3): Writing 24 = 0x18 bytes to port...
0.092649 gp_port_write (3): Wrote 24 = 0x18 bytes to port: (hexdump of 24 bytes)
0000 18 00 00 00 01 00 07 10-04 00 00 00 01 00 01 00 ................
0010 00 00 00 00 ff ff ff ff- ........

0.092659 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object handles) data...
0.092663 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.094026 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 02 20-04 00 00 00 ....... ....

0.094047 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object handles) response...
0.094051 ptp_usb_getpacket (2): Returning previously buffered response packet.
0.094055 ptp_usb_getresp [usb.c:466] (0): PTP_OC 0x1007 receiving resp failed: PTP General Error (0x2002)
0.094060 file_list_func [library.c:5960](0): 'ptp_list_folder (params, storage, parent)' failed: 'PTP General Error' (0x2002)
0.094065 gp_context_error (0): PTP General Error

*** Error ***
PTP General Error
0.094076 gp_camera_folder_list_files [gphoto2-camera.c:1477](0): 'gp_filesystem_list_files (camera->fs, folder, list, context)' failed: -1
*** Error (-1: 'Unspecified error') ***

0.094309 gp_camera_free (2): Freeing camera...
0.094316 gp_camera_exit (2): Exiting camera ('Samsung Galaxy models (MTP)')...
0.094322 ptp_usb_sendreq (2): Sending PTP_OC 0x1003 (Close session) request...
0.094326 gp_port_write (3): Writing 12 = 0xc bytes to port...
0.094471 gp_port_write (3): Wrote 12 = 0xc bytes to port: (hexdump of 12 bytes)
0000 0c 00 00 00 01 00 03 10-05 00 00 00 ............

0.094481 ptp_usb_getresp (2): Reading PTP_OC 0x1003 (Close session) response...
0.094485 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.095181 gp_port_read (3): Read 12 = 0xc out of 1024 bytes from port: (hexdump of 12 bytes)
0000 0c 00 00 00 03 00 01 20-05 00 00 00 ....... ....

0.095197 gp_port_close (2): Closing port...
0.096274 _close_async_interrupts (2): canceling transfer 0:0x55d9af2a7250 (status 0)
0.096337 _close_async_interrupts (2): canceling transfer 1:0x55d9af2ae460 (status 0)
0.096400 _close_async_interrupts (2): canceling transfer 2:0x55d9af2ae650 (status 0)
0.096438 _close_async_interrupts (2): canceling transfer 3:0x55d9af2ae880 (status 0)
0.096476 _close_async_interrupts (2): canceling transfer 4:0x55d9af2aeab0 (status 0)
0.096516 _close_async_interrupts (2): canceling transfer 5:0x55d9af2aece0 (status 0)
0.096556 _close_async_interrupts (2): canceling transfer 6:0x55d9af2aef10 (status 0)
0.096596 _close_async_interrupts (2): canceling transfer 7:0x55d9af2af140 (status 0)
0.096636 _close_async_interrupts (2): canceling transfer 8:0x55d9af2af370 (status 0)
0.096676 _close_async_interrupts (2): canceling transfer 9:0x55d9af2af5a0 (status 0)
0.096722 _cb_irq (2): 0x55d9af2a7250 with status 3
0.096729 _cb_irq (2): Transfer 0x55d9af2a7250 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096733 _cb_irq (2): 0x55d9af2ae460 with status 3
0.096737 _cb_irq (2): Transfer 0x55d9af2ae460 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096740 _cb_irq (2): 0x55d9af2ae650 with status 3
0.096743 _cb_irq (2): Transfer 0x55d9af2ae650 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096746 _cb_irq (2): 0x55d9af2ae880 with status 3
0.096748 _cb_irq (2): Transfer 0x55d9af2ae880 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096752 _cb_irq (2): 0x55d9af2aeab0 with status 3
0.096754 _cb_irq (2): Transfer 0x55d9af2aeab0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096758 _cb_irq (2): 0x55d9af2aece0 with status 3
0.096760 _cb_irq (2): Transfer 0x55d9af2aece0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096763 _cb_irq (2): 0x55d9af2aef10 with status 3
0.096765 _cb_irq (2): Transfer 0x55d9af2aef10 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096769 _cb_irq (2): 0x55d9af2af140 with status 3
0.096771 _cb_irq (2): Transfer 0x55d9af2af140 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096775 _cb_irq (2): 0x55d9af2af370 with status 3
0.096777 _cb_irq (2): Transfer 0x55d9af2af370 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096781 _cb_irq (2): 0x55d9af2af5a0 with status 3
0.096783 _cb_irq (2): Transfer 0x55d9af2af5a0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.096930 gp_filesystem_reset (2): resetting filesystem
0.096935 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
0.096937 gp_filesystem_lru_clear (2): fscache LRU list already empty
0.096939 delete_all_folders (2): Internally deleting all folders from '/'...
0.096942 lookup_folder (2): Lookup folder '/'...
0.096945 lookup_folder (2): Found! / is 0x55d9af2a2320
0.096948 recurse_delete_folder (2): Recurse delete folder 0x55d9af2a2320//
0.096950 recurse_delete_folder (2): Recurse delete folder 0x55d9af2a7ac0/store_00010001
0.096953 delete_folder (2): Delete one folder 0x55d9af2a7ac0/store_00010001
0.096955 delete_all_files (2): Delete all files in folder 0x55d9af2a7ac0/store_00010001
0.096958 gp_port_free (2): Freeing port...
0.096960 gp_port_close (2): Closing port...
0.097324 gp_filesystem_reset (2): resetting filesystem
0.097330 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
0.097332 gp_filesystem_lru_clear (2): fscache LRU list already empty
0.097334 delete_all_folders (2): Internally deleting all folders from '/'...
0.097336 lookup_folder (2): Lookup folder '/'...
0.097338 lookup_folder (2): Found! / is 0x55d9af2a2320
0.097340 recurse_delete_folder (2): Recurse delete folder 0x55d9af2a2320//

Should I mark this thread as SOLVED and open a new one? Thank you all for your attention.

Ant P.
Watchman

Joined: 18 Apr 2009
Posts: 6920

Posted: Wed May 02, 2018 10:09 pm Post subject:

Go ahead and mark it solved, if you think it is. You can still continue in this thread if you want to. Weird that gphoto2 is doing that even with PTP... try gphoto2 --list-folders, then (assuming this folder exists) gphoto2 -f '/store_00010001/DCIM' -L should show the photos. Finally gphoto2 -f '/store_00010001/DCIM' -P ought to grab them. No need to do that now, you said you got it done, but it's useful for future reference.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Thu May 03, 2018 2:16 am Post subject:

Ant P. wrote:

Go ahead and mark it solved, if you think it is. You can still continue in this thread if you want to.

Well, what I have learned is that there is a way of extracting photos or other files from the extcard of my mobile, but the solution is far from perfect. In fact it feels/sounds like a huge workaround: 1) put your phone into developer mode; 2) install adb, which seems to be made exclusively for developers and not regular users; 3) extract via adb after guessing where is your extcard.

I mean, a regular user should not be using adb for basic tasks like this one. From what I have learned adb has the power to format your entire phone with a simple command like, so it is dangerous...

What I would call a solution would be something that allows me to mount the phone, like simple-mtpfs does, AND allows me to see every file inside of it as it happens with any other storage medium. Here I can see and extract via adb, but apparently cant use any other program to see its contents, which in my case includes gphoto2, pcmanfm and simple terminal. I have been accessing my android phones since the first one I bought in my linux machines (almost all of them fedora, none of them gentoo), so it must be something missing either in the kernel or some local use flag or even a bug that is not showing itself properly. In other words, there is still some configuration issue in my box.

Ant P. wrote:

Weird that gphoto2 is doing that even with PTP... try gphoto2 --list-folders, then (assuming this folder exists) gphoto2 -f '/store_00010001/DCIM' -L should show the photos.
Finally gphoto2 -f '/store_00010001/DCIM' -P ought to grab them. No need to do that now, you said you got it done, but it's useful for future reference.

As you can see it either does not work or I am using the commands you suggested incorrectly:

Code:

myusb> gphoto2 --list-folders
There are 2 folders in folder '/'.
- store_00010001
- store_00020002
There are 30 folders in folder '/store_00010001'.
- Alarms
- Android
- AnkiDroid
- DCIM
- Documents
- Download
- Movies
- Music
- MyTinyScan
- MyTinyScan_PDF
- Notifications
- Pictures
- Playlists
- Podcasts
- Ringtones
- SMSBackupRestore
- Samsung
- SamsungMusic
- UniversalImageLoader
- WhatsApp
- com.facebook.katana
- com.facebook.orca
- com.pm.lvlo
- database
- xpi

*** Error ***
PTP I/O Error
*** Error (-7: 'I/O problem') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:

env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-folders

Please make sure there is sufficient quoting around the arguments.

myusb> gphoto2 -f /store_00020002
myusb> gphoto2 -f '/store_00020002'
myusb> gphoto2 -f '/store_00020002/DCIM'
myusb> gphoto2 -f '/store_00020002/DCIM/Camera'
myusb> gphoto2 -f /store_00020002/DCIM/Camera
myusb> gphoto2 -f /store_00010001
myusb> gphoto2 -f /store_00010001/DCIM
myusb> gphoto2 -f '/store_00010001/DCIM'
myusb>gphoto2 --debug --list-folders
0.000065 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000081 main (2): gphoto2 2.5.15
0.000089 main (2): gphoto2 has been compiled with the following options:
0.000092 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000095 main (2): + popt (mandatory, for handling command-line parameters)
0.000098 main (2): + no exif (for displaying EXIF information)
0.000101 main (2): + no cdk (for accessing configuration options)
0.000103 main (2): + no aa (for displaying live previews)
0.000106 main (2): + no jpeg (for displaying live previews in JPEG format)
0.000108 main (2): + readline (for easy navigation in the shell)
0.000116 main (2): libgphoto2 2.5.16
0.000120 main (2): libgphoto2 has been compiled with the following options:
0.000123 main (2): + INCOMPLETE CAMLIB SET (ptp2 samsung)
0.000125 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000128 main (2): + ltdl (for portable loading of camlibs)
0.000132 main (2): + no EXIF (for special handling of EXIF files)
0.000137 main (2): libgphoto2_port 0.12.0
0.000141 main (2): libgphoto2_port has been compiled with the following options:
0.000144 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi
0.000147 main (2): + x86_64-pc-linux-gnu-gcc (C compiler used)
0.000149 main (2): + ltdl (for portable loading of iolibs)
0.000152 main (2): + USB (libusb1, for USB cameras)
0.000154 main (2): + serial (for serial cameras)
0.000156 main (2): + no resmgr (serial port access and locking)
0.000159 main (2): + no ttylock (serial port locking)
0.000161 main (2): + lockdev (serial port locking)
0.000163 main (2): CAMLIBS env var not set, using compile-time default instead
0.000166 main (2): IOLIBS env var not set, using compile-time default instead
0.000168 main (2): invoked with following arguments:
0.000170 main (2): --debug
0.000173 main (2): --list-folders
0.000189 load_settings (2): Creating gphoto config directory ('/home/vinicius/.gphoto')
0.000225 load_settings (2): Loading settings from file '/home/vinicius/.gphoto/settings'.
0.000311 main (2): The user has not specified both a model and a port. Try to figure them out.
0.000319 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib64/libgphoto2_port/0.12.0'...
0.000361 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.000578 gp_port_library_list (2): found mtab fsname proc
0.000586 gp_port_library_list (2): found mtab fsname udev
0.000600 gp_port_library_list (2): found mtab fsname devpts
0.000605 gp_port_library_list (2): found mtab fsname sysfs
0.000609 gp_port_library_list (2): found mtab fsname /dev/mapper/vg0-lvol1
0.000617 gp_port_library_list (2): found mtab fsname selinuxfs
0.000632 gp_port_library_list (2): found mtab fsname tmpfs
0.000643 gp_port_library_list (2): found mtab fsname mqueue
0.000648 gp_port_library_list (2): found mtab fsname shm
0.000658 gp_port_library_list (2): found mtab fsname debugfs
0.000669 gp_port_library_list (2): found mtab fsname fusectl
0.000674 gp_port_library_list (2): found mtab fsname cgroup_root
0.000679 gp_port_library_list (2): found mtab fsname openrc
0.000714 gp_port_library_list (2): found mtab fsname none
0.000729 gp_port_library_list (2): found mtab fsname cpuset
0.000747 gp_port_library_list (2): found mtab fsname cpu
0.000759 gp_port_library_list (2): found mtab fsname cpuacct
0.000771 gp_port_library_list (2): found mtab fsname freezer
0.000782 gp_port_library_list (2): found mtab fsname binfmt_misc
0.000798 gp_port_library_list (2): found mtab fsname none
0.000831 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib64/libgphoto2_port/0.12.0/disk'.
0.000836 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.000941 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.000949 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib64/libgphoto2_port/0.12.0/ptpip'.
0.000953 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001213 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001221 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001226 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001230 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001233 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001236 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib64/libgphoto2_port/0.12.0/serial'.
0.001239 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.003514 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.003525 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,004') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.003530 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,002') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.003534 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,078') from '/usr/lib64/libgphoto2_port/0.12.0/usb1'.
0.003538 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbdiskdirect'.
0.003714 foreach_func (2): Called for filename '/usr/lib64/libgphoto2_port/0.12.0/usbscsi'.
0.003823 gp_port_info_list_count (2): Counting entries (13 available)...
0.003827 gp_port_info_list_count (2): 9 regular entries available.
0.003833 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib64/libgphoto2/2.5.16'...
0.003872 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/ptp2'.
0.003876 foreach_func (2): Found '/usr/lib64/libgphoto2/2.5.16/samsung'.
0.003879 gp_abilities_list_load_dir (2): Found 2 camera drivers.
0.009981 gp_port_info_list_count (2): Counting entries (13 available)...
0.009990 gp_port_info_list_count (2): 9 regular entries available.
0.009994 gp_port_new (2): Creating new device...
0.009999 gp_port_info_list_get_info (2): Getting info of entry 0 (13 available)...
0.010077 gp_port_set_settings (2): Setting settings...
0.010082 gp_port_info_list_get_info (2): Getting info of entry 1 (13 available)...
0.010209 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.010213 gp_port_set_settings (2): Setting settings...
0.010215 gp_port_info_list_get_info (2): Getting info of entry 2 (13 available)...
0.010324 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.010328 gp_port_set_settings (2): Setting settings...
0.010330 gp_port_info_list_get_info (2): Getting info of entry 3 (13 available)...
0.010427 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.010430 gp_port_set_settings (2): Setting settings...
0.010432 gp_port_info_list_get_info (2): Getting info of entry 4 (13 available)...
0.010524 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.010528 gp_port_set_settings (2): Setting settings...
0.010530 gp_port_info_list_get_info (2): Getting info of entry 5 (13 available)...
0.010621 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds.
0.010624 gp_port_set_settings (2): Setting settings...
0.010627 gp_port_info_list_get_info (2): Getting info of entry 6 (13 available)...
0.011868 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.011878 gp_port_set_settings (2): Setting settings...
0.011884 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,004, (new int=0, conf=-1, alt=-1) port usb:001,004
0.011886 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.011890 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.012217 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.012544 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.012585 gp_port_info_list_get_info (2): Getting info of entry 7 (13 available)...
0.014108 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.014116 gp_port_set_settings (2): Setting settings...
0.014140 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
0.014143 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.014147 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.014519 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.014768 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)...
0.014804 gp_port_info_list_get_info (2): Getting info of entry 8 (13 available)...
0.016177 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.016184 gp_port_set_settings (2): Setting settings...
0.016189 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,078, (new int=0, conf=-1, alt=-1) port usb:001,078
0.016192 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.016195 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
0.016509 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
0.016608 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4e8, product 0x6860)... found.
0.016651 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 81, outep 01, intep 82, class 06, subclass 01
0.016655 gp_abilities_list_detect_usb(2): Found 'Samsung Galaxy models (MTP)' (0x4e8,0x6860)
0.016661 gp_port_free (2): Freeing port...
0.016663 gp_port_close (2): Closing port...
0.016789 gp_camera_set_abilities (2): Setting abilities ('Samsung Galaxy models (MTP)')...
0.016795 gp_setting_set (2): Setting key 'model' to value 'Samsung Galaxy models (MTP)' (gphoto2)
0.016800 save_settings (2): Saving 2 setting(s) to file "/home/vinicius/.gphoto/settings"
0.016872 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,078' (13 entries available)...
0.016890 gp_port_info_list_get_info (2): Getting info of entry 8 (13 available)...
0.016895 gp_camera_set_port_info (2): Setting port info for port 'Universal Serial Bus' at 'usb:001,078'...
0.018140 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds.
0.018145 gp_port_set_settings (2): Setting settings...
0.018151 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,078, (new int=0, conf=-1, alt=-1) port usb:001,078
0.018154 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes
0.018158 gp_setting_set (2): Setting key 'port' to value 'usb:001,078' (gphoto2)
0.018161 save_settings (2): Saving 2 setting(s) to file "/home/vinicius/.gphoto/settings"
0.029891 foreach (2): Executing action 'List Folders' for folder '/'.
0.029902 gp_camera_folder_list_folders(2): Listing folders in '/'...
0.029905 gp_camera_init (2): Initializing camera...
0.029923 gp_libusb1_find_device_lib (2): Looking for USB device (vendor 0x4e8, product 0x6860)... found.
0.029993 gp_libusb1_find_device_lib (2): Detected defaults: config 1, interface 0, altsetting 0, inep 81, outep 01, intep 82, class 06, subclass 01
0.029999 gp_camera_init (2): Loading '/usr/lib64/libgphoto2/2.5.16/ptp2'...
0.030855 gp_port_open (2): Opening USB port...
0.030862 gp_libusb1_open (2): ()
0.030883 gp_libusb1_open (2): claiming interface 0
0.030945 camera_init (2): maxpacketsize 512
0.030953 gp_port_set_timeout (2): Setting port timeout to 8000 milliseconds.
0.030965 ptp (2): PTP: Opening session
0.030989 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open session) (0x1) request...
0.030994 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.031120 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................

0.031127 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open session) response...
0.031132 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.031212 gp_port_read (3): Read 1024 = 0x400 bytes from port: (hexdump of 1024 bytes)
0000 b0 2b 00 00 b1 2b 00 00-b2 2b 00 00 c9 2d 00 00 .+...+...+...-..
0010 ca 2d 00 00 cb 2d 00 00-cc 2d 00 00 cd 2d 00 00 .-...-...-...-..
0020 ce 2d 00 00 cf 2d 00 00-d0 2d 00 00 d1 2d 00 00 .-...-...-...-..
0030 d2 2d 00 00 d3 2d 00 00-d4 2d 00 00 d5 2d 00 00 .-...-...-...-..
0040 d6 2d 00 00 d7 2d 00 00-d8 2d 00 00 d9 2d 00 00 .-...-...-...-..
0050 da 2d 00 00 db 2d 00 00-dc 2d 00 00 dd 2d 00 00 .-...-...-...-..
0060 de 2d 00 00 df 2d 00 00-e0 2d 00 00 e1 2d 00 00 .-...-...-...-..
0070 e2 2d 00 00 e3 2d 00 00-e4 2d 00 00 e5 2d 00 00 .-...-...-...-..
0080 e6 2d 00 00 e7 2d 00 00-e8 2d 00 00 e9 2d 00 00 .-...-...-...-..
0090 ea 2d 00 00 eb 2d 00 00-ec 2d 00 00 ed 2d 00 00 .-...-...-...-..
00a0 ee 2d 00 00 ef 2d 00 00-f0 2d 00 00 f1 2d 00 00 .-...-...-...-..
00b0 f2 2d 00 00 f3 2d 00 00-f4 2d 00 00 f5 2d 00 00 .-...-...-...-..
00c0 f6 2d 00 00 f7 2d 00 00-f8 2d 00 00 f9 2d 00 00 .-...-...-...-..
00d0 fa 2d 00 00 fb 2d 00 00-fc 2d 00 00 fd 2d 00 00 .-...-...-...-..
00e0 fe 2d 00 00 ff 2d 00 00-00 2e 00 00 01 2e 00 00 .-...-..........
00f0 02 2e 00 00 03 2e 00 00-04 2e 00 00 05 2e 00 00 ................
0100 06 2e 00 00 07 2e 00 00-08 2e 00 00 09 2e 00 00 ................
0110 0a 2e 00 00 0b 2e 00 00-0c 2e 00 00 0d 2e 00 00 ................
0120 0e 2e 00 00 0f 2e 00 00-10 2e 00 00 11 2e 00 00 ................
0130 12 2e 00 00 13 2e 00 00-14 2e 00 00 15 2e 00 00 ................
0140 16 2e 00 00 17 2e 00 00-18 2e 00 00 19 2e 00 00 ................
0150 1a 2e 00 00 1b 2e 00 00-1c 2e 00 00 1d 2e 00 00 ................
0160 1e 2e 00 00 1f 2e 00 00-20 2e 00 00 21 2e 00 00 ........ ...!...
0170 22 2e 00 00 23 2e 00 00-24 2e 00 00 25 2e 00 00 "...#...$...%...
0180 26 2e 00 00 27 2e 00 00-28 2e 00 00 29 2e 00 00 &...'...(...)...
0190 2a 2e 00 00 2b 2e 00 00-2c 2e 00 00 2d 2e 00 00 *...+...,...-...
01a0 2e 2e 00 00 21 2f 00 00-22 2f 00 00 23 2f 00 00 ....!/.."/..#/..
01b0 24 2f 00 00 25 2f 00 00-26 2f 00 00 27 2f 00 00 $/..%/..&/..'/..
01c0 28 2f 00 00 29 2f 00 00-2a 2f 00 00 2b 2f 00 00 (/..)/..*/..+/..
01d0 2c 2f 00 00 2d 2f 00 00-2e 2f 00 00 2f 2f 00 00 ,/..-/.../..//..
01e0 30 2f 00 00 31 2f 00 00-32 2f 00 00 33 2f 00 00 0/..1/..2/..3/..
01f0 34 2f 00 00 35 2f 00 00-36 2f 00 00 37 2f 00 00 4/..5/..6/..7/..
0200 38 2f 00 00 39 2f 00 00-3a 2f 00 00 3b 2f 00 00 8/..9/..:/..;/..
0210 3c 2f 00 00 3d 2f 00 00-3e 2f 00 00 3f 2f 00 00 </..=/..>/..?/..
0220 40 2f 00 00 41 2f 00 00-42 2f 00 00 43 2f 00 00 @/..A/..B/..C/..
0230 44 2f 00 00 45 2f 00 00-46 2f 00 00 47 2f 00 00 D/..E/..F/..G/..
0240 48 2f 00 00 49 2f 00 00-4a 2f 00 00 4b 2f 00 00 H/..I/..J/..K/..
0250 4c 2f 00 00 4d 2f 00 00-4e 2f 00 00 4f 2f 00 00 L/..M/..N/..O/..
0260 50 2f 00 00 51 2f 00 00-52 2f 00 00 53 2f 00 00 P/..Q/..R/..S/..
0270 54 2f 00 00 55 2f 00 00-56 2f 00 00 57 2f 00 00 T/..U/..V/..W/..
0280 58 2f 00 00 59 2f 00 00-5a 2f 00 00 5b 2f 00 00 X/..Y/..Z/..[/..
0290 5c 2f 00 00 5d 2f 00 00-5e 2f 00 00 5f 2f 00 00 \/..]/..^/.._/..
02a0 60 2f 00 00 61 2f 00 00-62 2f 00 00 63 2f 00 00 `/..a/..b/..c/..
02b0 64 2f 00 00 65 2f 00 00-66 2f 00 00 67 2f 00 00 d/..e/..f/..g/..
02c0 68 2f 00 00 69 2f 00 00-6a 2f 00 00 6b 2f 00 00 h/..i/..j/..k/..
02d0 6c 2f 00 00 b1 2f 00 00-b2 2f 00 00 b3 2f 00 00 l/.../.../.../..
02e0 b4 2f 00 00 b5 2f 00 00-b6 2f 00 00 b7 2f 00 00 ./.../.../.../..
02f0 b8 2f 00 00 b9 2f 00 00-ba 2f 00 00 bb 2f 00 00 ./.../.../.../..
0300 bc 2f 00 00 bd 2f 00 00-be 2f 00 00 bf 2f 00 00 ./.../.../.../..
0310 c0 2f 00 00 c1 2f 00 00-c2 2f 00 00 c3 2f 00 00 ./.../.../.../..
0320 c4 2f 00 00 c5 2f 00 00-c6 2f 00 00 c7 2f 00 00 ./.../.../.../..
0330 c8 2f 00 00 c9 2f 00 00-ca 2f 00 00 cb 2f 00 00 ./.../.../.../..
0340 cc 2f 00 00 cd 2f 00 00-ce 2f 00 00 cf 2f 00 00 ./.../.../.../..
0350 d0 2f 00 00 d1 2f 00 00-d2 2f 00 00 d3 2f 00 00 ./.../.../.../..
0360 5b 30 00 00 5c 30 00 00-5d 30 00 00 5e 30 00 00 [0..\0..]0..^0..
0370 5f 30 00 00 60 30 00 00-61 30 00 00 62 30 00 00 _0..`0..a0..b0..
0380 63 30 00 00 64 30 00 00-65 30 00 00 66 30 00 00 c0..d0..e0..f0..
0390 67 30 00 00 68 30 00 00-69 30 00 00 6a 30 00 00 g0..h0..i0..j0..
03a0 6b 30 00 00 6c 30 00 00-6d 30 00 00 6e 30 00 00 k0..l0..m0..n0..
03b0 6f 30 00 00 70 30 00 00-71 30 00 00 72 30 00 00 o0..p0..q0..r0..
03c0 73 30 00 00 74 30 00 00-75 30 00 00 76 30 00 00 s0..t0..u0..v0..
03d0 77 30 00 00 78 30 00 00-79 30 00 00 7a 30 00 00 w0..x0..y0..z0..
03e0 7b 30 00 00 7c 30 00 00-7d 30 00 00 7e 30 00 00 {0..|0..}0..~0..
03f0 7f 30 00 00 c6 30 00 00-c7 30 00 00 c8 30 00 00 .0...0...0...0..

0.031260 ptp_usb_getresp [usb.c:466] (0): PTP_OC 0x1002 receiving resp failed: PTP I/O Error (0x02ff)
0.031266 camera_init [library.c:8129](0): 'ptp_opensession (params, sessionid)' failed: PTP I/O Error (0x02ff)
0.031269 ptp_usb_control_device_reset_request(2): Sending usb device reset request.
0.031275 gp_port_usb_msg_class_write (3): Writing message (request=0x66 value=0x0 index=0x0 size=0=0x0): (no hexdump, NULL buffer)
0.031415 ptp (2): PTP: Opening session
0.031422 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open session) (0x1) request...
0.031425 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.031472 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................

0.031477 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open session) response...
0.031481 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.031583 gp_port_read (3): Read 1024 = 0x400 bytes from port: (hexdump of 1024 bytes)
0000 c9 30 00 00 ca 30 00 00-3e 31 00 00 3f 31 00 00 .0...0..>1..?1..
0010 40 31 00 00 41 31 00 00-42 31 00 00 43 31 00 00 @1..A1..B1..C1..
0020 44 31 00 00 45 31 00 00-46 31 00 00 47 31 00 00 D1..E1..F1..G1..
0030 48 31 00 00 49 31 00 00-4a 31 00 00 4b 31 00 00 H1..I1..J1..K1..
0040 4c 31 00 00 4d 31 00 00-4e 31 00 00 4f 31 00 00 L1..M1..N1..O1..
0050 50 31 00 00 51 31 00 00-52 31 00 00 53 31 00 00 P1..Q1..R1..S1..
0060 54 31 00 00 55 31 00 00-56 31 00 00 57 31 00 00 T1..U1..V1..W1..
0070 58 31 00 00 59 31 00 00-5a 31 00 00 5b 31 00 00 X1..Y1..Z1..[1..
0080 5c 31 00 00 5d 31 00 00-13 32 00 00 14 32 00 00 \1..]1...2...2..
0090 15 32 00 00 16 32 00 00-17 32 00 00 18 32 00 00 .2...2...2...2..
00a0 19 32 00 00 1a 32 00 00-1b 32 00 00 1c 32 00 00 .2...2...2...2..
00b0 1d 32 00 00 1e 32 00 00-1f 32 00 00 20 32 00 00 .2...2...2.. 2..
00c0 21 32 00 00 22 32 00 00-23 32 00 00 24 32 00 00 !2.."2..#2..$2..
00d0 25 32 00 00 26 32 00 00-27 32 00 00 28 32 00 00 %2..&2..'2..(2..
00e0 29 32 00 00 2a 32 00 00-2b 32 00 00 2c 32 00 00 )2..*2..+2..,2..
00f0 2d 32 00 00 2e 32 00 00-2f 32 00 00 30 32 00 00 -2...2../2..02..
0100 31 32 00 00 32 32 00 00-33 32 00 00 34 32 00 00 12..22..32..42..
0110 35 32 00 00 36 32 00 00-37 32 00 00 38 32 00 00 52..62..72..82..
0120 39 32 00 00 3a 32 00 00-3b 32 00 00 3c 32 00 00 92..:2..;2..<2..
0130 3d 32 00 00 3e 32 00 00-3f 32 00 00 40 32 00 00 =2..>2..?2..@2..
0140 41 32 00 00 42 32 00 00-43 32 00 00 44 32 00 00 A2..B2..C2..D2..
0150 45 32 00 00 e9 33 00 00-ea 33 00 00 eb 33 00 00 E2...3...3...3..
0160 ec 33 00 00 ed 33 00 00-ee 33 00 00 ef 33 00 00 .3...3...3...3..
0170 f0 33 00 00 f1 33 00 00-f2 33 00 00 f3 33 00 00 .3...3...3...3..
0180 f4 33 00 00 f5 33 00 00-f6 33 00 00 f7 33 00 00 .3...3...3...3..
0190 f8 33 00 00 f9 33 00 00-fa 33 00 00 fb 33 00 00 .3...3...3...3..
01a0 fc 33 00 00 fd 33 00 00-fe 33 00 00 ff 33 00 00 .3...3...3...3..
01b0 00 34 00 00 01 34 00 00-02 34 00 00 03 34 00 00 .4...4...4...4..
01c0 04 34 00 00 05 34 00 00-06 34 00 00 07 34 00 00 .4...4...4...4..
01d0 08 34 00 00 09 34 00 00-0a 34 00 00 0b 34 00 00 .4...4...4...4..
01e0 0c 34 00 00 0d 34 00 00-0e 34 00 00 0f 34 00 00 .4...4...4...4..
01f0 10 34 00 00 11 34 00 00-12 34 00 00 13 34 00 00 .4...4...4...4..
0200 14 34 00 00 15 34 00 00-16 34 00 00 17 34 00 00 .4...4...4...4..
0210 18 34 00 00 19 34 00 00-1a 34 00 00 1b 34 00 00 .4...4...4...4..
0220 1c 34 00 00 1d 34 00 00-1e 34 00 00 1f 34 00 00 .4...4...4...4..
0230 20 34 00 00 21 34 00 00-22 34 00 00 23 34 00 00 4..!4.."4..#4..
0240 24 34 00 00 25 34 00 00-26 34 00 00 27 34 00 00 $4..%4..&4..'4..
0250 28 34 00 00 29 34 00 00-2a 34 00 00 2b 34 00 00 (4..)4..*4..+4..
0260 2c 34 00 00 2d 34 00 00-2e 34 00 00 2f 34 00 00 ,4..-4...4../4..
0270 30 34 00 00 31 34 00 00-32 34 00 00 33 34 00 00 04..14..24..34..
0280 34 34 00 00 35 34 00 00-36 34 00 00 37 34 00 00 44..54..64..74..
0290 38 34 00 00 39 34 00 00-3a 34 00 00 3b 34 00 00 84..94..:4..;4..
02a0 3c 34 00 00 3d 34 00 00-3e 34 00 00 3f 34 00 00 <4..=4..>4..?4..
02b0 40 34 00 00 41 34 00 00-42 34 00 00 43 34 00 00 @4..A4..B4..C4..
02c0 44 34 00 00 45 34 00 00-46 34 00 00 47 34 00 00 D4..E4..F4..G4..
02d0 48 34 00 00 49 34 00 00-4a 34 00 00 4b 34 00 00 H4..I4..J4..K4..
02e0 4c 34 00 00 4d 34 00 00-4e 34 00 00 4f 34 00 00 L4..M4..N4..O4..
02f0 50 34 00 00 51 34 00 00-52 34 00 00 53 34 00 00 P4..Q4..R4..S4..
0300 54 34 00 00 55 34 00 00-56 34 00 00 57 34 00 00 T4..U4..V4..W4..
0310 58 34 00 00 59 34 00 00-5a 34 00 00 5b 34 00 00 X4..Y4..Z4..[4..
0320 5c 34 00 00 5d 34 00 00-5e 34 00 00 5f 34 00 00 \4..]4..^4.._4..
0330 60 34 00 00 61 34 00 00-62 34 00 00 63 34 00 00 `4..a4..b4..c4..
0340 64 34 00 00 65 34 00 00-66 34 00 00 67 34 00 00 d4..e4..f4..g4..
0350 69 34 00 00 6a 34 00 00-6b 34 00 00 6c 34 00 00 i4..j4..k4..l4..
0360 6d 34 00 00 6e 34 00 00-6f 34 00 00 70 34 00 00 m4..n4..o4..p4..
0370 71 34 00 00 72 34 00 00-73 34 00 00 83 34 00 00 q4..r4..s4...4..
0380 17 37 00 00 18 37 00 00-19 37 00 00 1a 37 00 00 .7...7...7...7..
0390 1b 37 00 00 1c 37 00 00-1d 37 00 00 1e 37 00 00 .7...7...7...7..
03a0 1f 37 00 00 20 37 00 00-21 37 00 00 22 37 00 00 .7.. 7..!7.."7..
03b0 23 37 00 00 24 37 00 00-25 37 00 00 26 37 00 00 #7..$7..%7..&7..
03c0 27 37 00 00 28 37 00 00-29 37 00 00 2a 37 00 00 '7..(7..)7..*7..
03d0 2b 37 00 00 2c 37 00 00-2d 37 00 00 2e 37 00 00 +7..,7..-7...7..
03e0 2f 37 00 00 30 37 00 00-31 37 00 00 32 37 00 00 /7..07..17..27..
03f0 33 37 00 00 34 37 00 00-35 37 00 00 36 37 00 00 37..47..57..67..

0.031617 ptp_usb_getresp [usb.c:466] (0): PTP_OC 0x1002 receiving resp failed: PTP I/O Error (0x02ff)
0.031622 camera_init [library.c:8129](0): 'ptp_opensession (params, sessionid)' failed: PTP I/O Error (0x02ff)
0.031624 ptp_usb_control_device_reset_request(2): Sending usb device reset request.
0.031628 gp_port_usb_msg_class_write (3): Writing message (request=0x66 value=0x0 index=0x0 size=0=0x0): (no hexdump, NULL buffer)
0.031695 ptp (2): PTP: Opening session
0.031701 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open session) (0x1) request...
0.031704 gp_port_write (3): Writing 16 = 0x10 bytes to port...
0.031771 gp_port_write (3): Wrote 16 = 0x10 bytes to port: (hexdump of 16 bytes)
0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................

0.031778 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open session) response...
0.031781 gp_port_read (3): Reading 1024 = 0x400 bytes from port...
0.031872 gp_port_read (3): Read 1024 = 0x400 bytes from port: (hexdump of 1024 bytes)
0000 37 37 00 00 38 37 00 00-39 37 00 00 3a 37 00 00 77..87..97..:7..
0010 3b 37 00 00 3c 37 00 00-3d 37 00 00 3e 37 00 00 ;7..<7..=7..>7..
0020 3f 37 00 00 40 37 00 00-41 37 00 00 42 37 00 00 ?7..@7..A7..B7..
0030 43 37 00 00 44 37 00 00-45 37 00 00 46 37 00 00 C7..D7..E7..F7..
0040 47 37 00 00 48 37 00 00-49 37 00 00 4a 37 00 00 G7..H7..I7..J7..
0050 4b 37 00 00 4c 37 00 00-4d 37 00 00 4e 37 00 00 K7..L7..M7..N7..
0060 4f 37 00 00 50 37 00 00-51 37 00 00 52 37 00 00 O7..P7..Q7..R7..
0070 53 37 00 00 54 37 00 00-55 37 00 00 56 37 00 00 S7..T7..U7..V7..
0080 57 37 00 00 58 37 00 00-59 37 00 00 5a 37 00 00 W7..X7..Y7..Z7..
0090 5b 37 00 00 5c 37 00 00-5d 37 00 00 5e 37 00 00 [7..\7..]7..^7..
00a0 5f 37 00 00 60 37 00 00-61 37 00 00 62 37 00 00 _7..`7..a7..b7..
00b0 63 37 00 00 64 37 00 00-65 37 00 00 66 37 00 00 c7..d7..e7..f7..
00c0 67 37 00 00 68 37 00 00-69 37 00 00 6a 37 00 00 g7..h7..i7..j7..
00d0 6b 37 00 00 6c 37 00 00-6d 37 00 00 6e 37 00 00 k7..l7..m7..n7..
00e0 6f 37 00 00 70 37 00 00-71 37 00 00 72 37 00 00 o7..p7..q7..r7..
00f0 73 37 00 00 74 37 00 00-75 37 00 00 76 37 00 00 s7..t7..u7..v7..
0100 77 37 00 00 78 37 00 00-79 37 00 00 7a 37 00 00 w7..x7..y7..z7..
0110 7b 37 00 00 7c 37 00 00-7d 37 00 00 7e 37 00 00 {7..|7..}7..~7..
0120 7f 37 00 00 80 37 00 00-81 37 00 00 82 37 00 00 .7...7...7...7..
0130 83 37 00 00 84 37 00 00-85 37 00 00 86 37 00 00 .7...7...7...7..
0140 87 37 00 00 88 37 00 00-89 37 00 00 8a 37 00 00 .7...7...7...7..
0150 8b 37 00 00 8c 37 00 00-8d 37 00 00 8e 37 00 00 .7...7...7...7..
0160 8f 37 00 00 90 37 00 00-91 37 00 00 92 37 00 00 .7...7...7...7..
0170 93 37 00 00 94 37 00 00-95 37 00 00 96 37 00 00 .7...7...7...7..
0180 97 37 00 00 98 37 00 00-99 37 00 00 9a 37 00 00 .7...7...7...7..
0190 9b 37 00 00 9c 37 00 00-9d 37 00 00 9e 37 00 00 .7...7...7...7..
01a0 9f 37 00 00 a0 37 00 00-a1 37 00 00 a2 37 00 00 .7...7...7...7..
01b0 a3 37 00 00 a4 37 00 00-a5 37 00 00 a6 37 00 00 .7...7...7...7..
01c0 a7 37 00 00 a8 37 00 00-a9 37 00 00 aa 37 00 00 .7...7...7...7..
01d0 ab 37 00 00 ac 37 00 00-ad 37 00 00 ae 37 00 00 .7...7...7...7..
01e0 af 37 00 00 b0 37 00 00-b1 37 00 00 b2 37 00 00 .7...7...7...7..
01f0 b3 37 00 00 b4 37 00 00-b5 37 00 00 b6 37 00 00 .7...7...7...7..
0200 b7 37 00 00 b8 37 00 00-b9 37 00 00 ba 37 00 00 .7...7...7...7..
0210 bb 37 00 00 bc 37 00 00-bd 37 00 00 be 37 00 00 .7...7...7...7..
0220 bf 37 00 00 c0 37 00 00-c1 37 00 00 c2 37 00 00 .7...7...7...7..
0230 c3 37 00 00 c4 37 00 00-c5 37 00 00 c6 37 00 00 .7...7...7...7..
0240 c7 37 00 00 c8 37 00 00-c9 37 00 00 ca 37 00 00 .7...7...7...7..
0250 cb 37 00 00 cc 37 00 00-cd 37 00 00 ce 37 00 00 .7...7...7...7..
0260 cf 37 00 00 d0 37 00 00-d1 37 00 00 d2 37 00 00 .7...7...7...7..
0270 d3 37 00 00 d4 37 00 00-d5 37 00 00 d6 37 00 00 .7...7...7...7..
0280 d7 37 00 00 d8 37 00 00-d9 37 00 00 da 37 00 00 .7...7...7...7..
0290 db 37 00 00 dc 37 00 00-dd 37 00 00 de 37 00 00 .7...7...7...7..
02a0 df 37 00 00 7a 38 00 00-7b 38 00 00 7c 38 00 00 .7..z8..{8..|8..
02b0 7d 38 00 00 7e 38 00 00-7f 38 00 00 80 38 00 00 }8..~8...8...8..
02c0 ad 3b 00 00 81 38 00 00-82 38 00 00 83 38 00 00 .;...8...8...8..
02d0 84 38 00 00 85 38 00 00-86 38 00 00 87 38 00 00 .8...8...8...8..
02e0 88 38 00 00 89 38 00 00-8a 38 00 00 8b 38 00 00 .8...8...8...8..
02f0 8c 38 00 00 8d 38 00 00-8e 38 00 00 8f 38 00 00 .8...8...8...8..
0300 90 38 00 00 91 38 00 00-92 38 00 00 93 38 00 00 .8...8...8...8..
0310 94 38 00 00 95 38 00 00-96 38 00 00 97 38 00 00 .8...8...8...8..
0320 98 38 00 00 99 38 00 00-9a 38 00 00 9b 38 00 00 .8...8...8...8..
0330 9c 38 00 00 9d 38 00 00-9e 38 00 00 9f 38 00 00 .8...8...8...8..
0340 a0 38 00 00 a1 38 00 00-a2 38 00 00 a3 38 00 00 .8...8...8...8..
0350 a4 38 00 00 a5 38 00 00-a6 38 00 00 a7 38 00 00 .8...8...8...8..
0360 a8 38 00 00 a9 38 00 00-0c 39 00 00 0d 39 00 00 .8...8...9...9..
0370 0e 39 00 00 0f 39 00 00-10 39 00 00 11 39 00 00 .9...9...9...9..
0380 12 39 00 00 13 39 00 00-14 39 00 00 15 39 00 00 .9...9...9...9..
0390 37 39 00 00 38 39 00 00-39 39 00 00 97 39 00 00 79..89..99...9..
03a0 98 39 00 00 99 39 00 00-9a 39 00 00 9b 39 00 00 .9...9...9...9..
03b0 9c 39 00 00 9d 39 00 00-9e 39 00 00 9f 39 00 00 .9...9...9...9..
03c0 a0 39 00 00 a1 39 00 00-a2 39 00 00 a3 39 00 00 .9...9...9...9..
03d0 a4 39 00 00 a5 39 00 00-a6 39 00 00 a7 39 00 00 .9...9...9...9..
03e0 a8 39 00 00 a9 39 00 00-aa 39 00 00 ab 39 00 00 .9...9...9...9..
03f0 ac 39 00 00 ad 39 00 00-ae 39 00 00 af 39 00 00 .9...9...9...9..

0.031916 ptp_usb_getresp [usb.c:466] (0): PTP_OC 0x1002 receiving resp failed: PTP I/O Error (0x02ff)
0.031920 camera_init [library.c:8129](0): 'ptp_opensession (params, sessionid)' failed: PTP I/O Error (0x02ff)
0.031924 camera_init [library.c:8157](0): 'ret' failed: 'PTP I/O Error' (0x02ff)
0.031930 gp_context_error (0): PTP I/O Error

*** Error ***
PTP I/O Error
0.031940 gp_port_close (2): Closing port...
0.033297 _close_async_interrupts (2): canceling transfer 0:0x55bbc9ff4250 (status 0)
0.037797 _close_async_interrupts (2): canceling transfer 1:0x55bbc9ffb460 (status 0)
0.038221 _close_async_interrupts (2): canceling transfer 2:0x55bbc9ffb690 (status 0)
0.038259 _close_async_interrupts (2): canceling transfer 3:0x55bbc9ffb8c0 (status 0)
0.038298 _close_async_interrupts (2): canceling transfer 4:0x55bbc9ffbaf0 (status 0)
0.038333 _close_async_interrupts (2): canceling transfer 5:0x55bbc9ffbd20 (status 0)
0.038498 _close_async_interrupts (2): canceling transfer 6:0x55bbc9ffbf50 (status 0)
0.038533 _close_async_interrupts (2): canceling transfer 7:0x55bbc9ffc180 (status 0)
0.038571 _close_async_interrupts (2): canceling transfer 8:0x55bbc9ffc3b0 (status 0)
0.038608 _close_async_interrupts (2): canceling transfer 9:0x55bbc9ffc5e0 (status 0)
0.038664 _cb_irq (2): 0x55bbc9ff4250 with status 3
0.038673 _cb_irq (2): Transfer 0x55bbc9ff4250 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038684 _cb_irq (2): 0x55bbc9ffb460 with status 3
0.038688 _cb_irq (2): Transfer 0x55bbc9ffb460 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038694 _cb_irq (2): 0x55bbc9ffb690 with status 3
0.038697 _cb_irq (2): Transfer 0x55bbc9ffb690 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038703 _cb_irq (2): 0x55bbc9ffb8c0 with status 3
0.038706 _cb_irq (2): Transfer 0x55bbc9ffb8c0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038711 _cb_irq (2): 0x55bbc9ffbaf0 with status 3
0.038718 _cb_irq (2): Transfer 0x55bbc9ffbaf0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038726 _cb_irq (2): 0x55bbc9ffbd20 with status 3
0.038731 _cb_irq (2): Transfer 0x55bbc9ffbd20 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038739 _cb_irq (2): 0x55bbc9ffbf50 with status 3
0.038744 _cb_irq (2): Transfer 0x55bbc9ffbf50 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038750 _cb_irq (2): 0x55bbc9ffc180 with status 3
0.038753 _cb_irq (2): Transfer 0x55bbc9ffc180 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038760 _cb_irq (2): 0x55bbc9ffc3b0 with status 3
0.038765 _cb_irq (2): Transfer 0x55bbc9ffc3b0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.038771 _cb_irq (2): 0x55bbc9ffc5e0 with status 3
0.038775 _cb_irq (2): Transfer 0x55bbc9ffc5e0 should be in LIBUSB_TRANSFER_COMPLETED, but is 3!
0.039051 gp_context_error (0): An error occurred in the io-library ('I/O problem'): No error description available

*** Error ***
An error occurred in the io-library ('I/O problem'): No error description available
*** Error (-7: 'I/O problem') ***

0.039399 gp_camera_free (2): Freeing camera...
0.039407 gp_port_free (2): Freeing port...
0.039410 gp_port_close (2): Closing port...
0.039568 gp_filesystem_reset (2): resetting filesystem
0.039573 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
0.039576 gp_filesystem_lru_clear (2): fscache LRU list already empty
0.039579 delete_all_folders (2): Internally deleting all folders from '/'...
0.039582 lookup_folder (2): Lookup folder '/'...
0.039585 lookup_folder (2): Found! / is 0x55bbc9fef320
0.039588 recurse_delete_folder (2): Recurse delete folder 0x55bbc9fef320//
myusb>

The input/output error persists, and, even after locating the folders, I cant list its contents. Also, there is that pop up issue that I mentioned earlier in another reply: gphoto2 popped up the first time I plugged in the phone just after installing gphoto2 itself, and that never happened again, which is even more strange.

Thank you again for your reply.

Torro
n00b
n00b

Joined: 16 Apr 2018
Posts: 18
Location: Western Europe

Posted: Thu May 03, 2018 8:46 am Post subject:

vcmota wrote:

I work with adb & usb debugging mode exclusively on any and every android device. For me personally it's the best (and least complicated) way of working with the system. I did consider MTP/PTP (of course) and after a bit of fighting with it I decided to stop spending my time and energy working on a problem that is, IMO, easily fixed by using adb.

vcmota wrote:

I mean, a regular user should not be using adb for basic tasks like this one. From what I have learned adb has the power to format your entire phone with a simple command like, so it is dangerous...

I may be mistaken but isn't an adb shell by default a user shell? If it has the power to make important changes that would mean that your system's privileges are misconfigured.

I need to log in to the root account to make any possibly dangerous alterations (again, I may be mistaken, if so: please let me know).

vcmota wrote:

It worked, partially, but it dit!

Code:

adb pull storage/F0FF-1D06

worked perfectly

Glad to hear you now at least have access to your files! I'm sorry I can't help you with gphoto2 and MTP/PTP.

vcmota
Guru
Guru

Joined: 19 Jun 2017
Posts: 367

Posted: Thu May 03, 2018 11:28 am Post subject:

Torro wrote:

Glad to hear you now at least have access to your files! I'm sorry I can't help you with gphoto2 and MTP/PTP.

And thank you again Torro. Please don't misunderstand me, I am glad that a solution has been found, I am just saying that the solution is not ideal. Obviously there must be something misconfigured somewhere, there is no other reason for simple mounting MTP not working properly on my gentoo install if it does in other distros. One thing is something that can't work under any linux distro and therefore also does not work in gentoo, that would be sad but perfectly understandable, another thing is something that seems to work everywhere else and does not work exclusively for gentoo. That just can't be, gentoo is more flexible by construction, so that just can't be. Well, I am a resilient user, so I will keep looking into this for a while, and if I find something I will post here. Thank you very much again.

Display posts from previous:

	Gentoo Forums Forum Index Other Things Gentoo	All times are GMT Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy