Code: Select all
[ 2.096639] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.096767] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3692.236179] sr 4:0:0:0: [sr0] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 3692.236181] sr 4:0:0:0: [sr0] tag#22 Sense Key : 0x2 [current]
[ 3692.236182] sr 4:0:0:0: [sr0] tag#22 ASC=0x3a ASCQ=0x1
[ 3692.236184] sr 4:0:0:0: [sr0] tag#22 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 3692.236185] print_req_error: I/O error, dev sr0, sector 0
[ 3692.236241] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236269] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236276] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236282] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236288] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236293] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236299] sr 4:0:0:0: [sr0] unaligned transfer
[ 3692.236304] sr 4:0:0:0: [sr0] unaligned transfer
[24348.969732] sr 4:0:0:0: [sr0] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[24348.969734] sr 4:0:0:0: [sr0] tag#30 Sense Key : 0x2 [current]
[24348.969735] sr 4:0:0:0: [sr0] tag#30 ASC=0x3a ASCQ=0x1
[24348.969737] sr 4:0:0:0: [sr0] tag#30 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
Code: Select all
CD location : /dev/cdrom
CD driver name: GNU/Linux
access mode: IOCTL
Vendor : HL-DT-ST
Model : BD-RE BH16NS40
Revision : 1.03
Hardware : CD-ROM or DVD
Can eject : Yes
Can close tray : Yes
Can disable manual eject : Yes
Can select juke-box disc : No
Can set drive speed : No
Can read multiple sessions (e.g. PhotoCD) : Yes
Can hard reset device : Yes
Reading....
Can read Mode 2 Form 1 : Yes
Can read Mode 2 Form 2 : Yes
Can read (S)VCD (i.e. Mode 2 Form 1/2) : Yes
Can read C2 Errors : Yes
Can read IRSC : Yes
Can read Media Channel Number (or UPC) : Yes
Can play audio : Yes
Can read CD-DA : Yes
Can read CD-R : Yes
Can read CD-RW : Yes
Can read DVD-ROM : Yes
Writing....
Can write CD-RW : Yes
Can write DVD-R : Yes
Can write DVD-RAM : Yes
Can write DVD-RW : No
Can write DVD+RW : No
__________________________________
OP: Generally, if post length permits, you should edit extra information into your first post instead of replying to it. Some users run a canned search for threads with zero replies as a way of finding posts to answer. When you replied to yourself, you removed your thread from that list, even though you were not replying to announce that the thread was solved. Thus, they would no longer see your thread on the list of unanswered threads.
-Hu]

