| View previous topic :: View next topic |
| Author |
Message |
Sedrik
l33t
Joined: 08 Apr 2005
Posts: 655
Location: Uppsala, Sweden
|
 Posted: Sun Oct 29, 2017 9:15 am Post subject: Docker Error starting daemon: Devices cgroup isn't mounted |
 |
|
Hi all
Did a fresh install this weekend after having tested some other distros.
I can't get docker to start and I need it for my personal projects and it seems like my google-fu has failed me.
| Code: | localhost /home/sedrik # systemctl status docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sun 2017-10-29 09:58:33 CET; 5min ago
Docs: https://docs.docker.com
Process: 4902 ExecStart=/usr/bin/dockerd -H fd:// (code=exited, status=1/FAILURE)
Main PID: 4902 (code=exited, status=1/FAILURE)
CPU: 40ms
Oct 29 09:58:33 localhost dockerd[4902]: time="2017-10-29T09:58:33.323594449+01:00" level=warning msg="Your kernel does not support cgroup cfs quotas"
Oct 29 09:58:33 localhost dockerd[4902]: time="2017-10-29T09:58:33.323606089+01:00" level=warning msg="Your kernel does not support cgroup rt period"
Oct 29 09:58:33 localhost dockerd[4902]: time="2017-10-29T09:58:33.323619158+01:00" level=warning msg="Your kernel does not support cgroup rt runtime"
Oct 29 09:58:33 localhost dockerd[4902]: time="2017-10-29T09:58:33.323626533+01:00" level=warning msg="Unable to find blkio cgroup in mounts"
Oct 29 09:58:33 localhost dockerd[4902]: time="2017-10-29T09:58:33.323692010+01:00" level=warning msg="mountpoint for pids not found"
Oct 29 09:58:33 localhost dockerd[4902]: Error starting daemon: Devices cgroup isn't mounted
Oct 29 09:58:33 localhost systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE
Oct 29 09:58:33 localhost systemd[1]: Failed to start Docker Application Container Engine.
Oct 29 09:58:33 localhost systemd[1]: docker.service: Unit entered failed state.
Oct 29 09:58:33 localhost systemd[1]: docker.service: Failed with result 'exit-code'. |
exec /usr/share/docker/contrib/check-config.sh
| Code: |
warning: /proc/config.gz does not exist, searching other paths for kernel config ...
info: reading kernel config from /boot/config-4.12.12-gentoo ...
Generally Necessary:
- cgroup hierarchy: properly mounted [/sys/fs/cgroup]
- CONFIG_NAMESPACES: enabled
- CONFIG_NET_NS: enabled
- CONFIG_PID_NS: enabled
- CONFIG_IPC_NS: enabled
- CONFIG_UTS_NS: enabled
- CONFIG_CGROUPS: enabled
- CONFIG_CGROUP_CPUACCT: enabled
- CONFIG_CGROUP_DEVICE: enabled
- CONFIG_CGROUP_FREEZER: enabled
- CONFIG_CGROUP_SCHED: enabled
- CONFIG_CPUSETS: enabled
- CONFIG_MEMCG: enabled
- CONFIG_KEYS: enabled
- CONFIG_VETH: enabled
- CONFIG_BRIDGE: enabled
- CONFIG_BRIDGE_NETFILTER: enabled
- CONFIG_NF_NAT_IPV4: enabled (as module)
- CONFIG_IP_NF_FILTER: enabled
- CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled
- CONFIG_NETFILTER_XT_MATCH_IPVS: enabled
- CONFIG_IP_NF_NAT: enabled (as module)
- CONFIG_NF_NAT: enabled (as module)
- CONFIG_NF_NAT_NEEDED: enabled
- CONFIG_POSIX_MQUEUE: enabled
Optional Features:
- CONFIG_USER_NS: enabled
- CONFIG_SECCOMP: enabled
- CONFIG_CGROUP_PIDS: enabled
- CONFIG_MEMCG_SWAP: enabled
- CONFIG_MEMCG_SWAP_ENABLED: enabled
- CONFIG_LEGACY_VSYSCALL_EMULATE: enabled
- CONFIG_BLK_CGROUP: enabled
- CONFIG_BLK_DEV_THROTTLING: enabled
- CONFIG_IOSCHED_CFQ: enabled
- CONFIG_CFQ_GROUP_IOSCHED: enabled
- CONFIG_CGROUP_PERF: enabled
- CONFIG_CGROUP_HUGETLB: enabled
- CONFIG_NET_CLS_CGROUP: enabled
- CONFIG_CGROUP_NET_PRIO: enabled
- CONFIG_CFS_BANDWIDTH: enabled
- CONFIG_FAIR_GROUP_SCHED: enabled
- CONFIG_RT_GROUP_SCHED: enabled
- CONFIG_IP_VS: enabled
- CONFIG_IP_VS_NFCT: enabled
- CONFIG_IP_VS_RR: enabled
- CONFIG_EXT3_FS: enabled
- CONFIG_EXT3_FS_XATTR: missing
- CONFIG_EXT3_FS_POSIX_ACL: enabled
- CONFIG_EXT3_FS_SECURITY: enabled
(enable these ext3 configs if you are using ext3 as backing filesystem)
- CONFIG_EXT4_FS: enabled
- CONFIG_EXT4_FS_POSIX_ACL: enabled
- CONFIG_EXT4_FS_SECURITY: enabled
- Network Drivers:
- "overlay":
- CONFIG_VXLAN: enabled
Optional (for encrypted networks):
- CONFIG_CRYPTO: enabled
- CONFIG_CRYPTO_AEAD: enabled
- CONFIG_CRYPTO_GCM: enabled
- CONFIG_CRYPTO_SEQIV: enabled
- CONFIG_CRYPTO_GHASH: enabled
- CONFIG_XFRM: enabled
- CONFIG_XFRM_USER: enabled
- CONFIG_XFRM_ALGO: enabled
- CONFIG_INET_ESP: enabled
- CONFIG_INET_XFRM_MODE_TRANSPORT: enabled
- "ipvlan":
- CONFIG_IPVLAN: enabled
- "macvlan":
- CONFIG_MACVLAN: enabled
- CONFIG_DUMMY: enabled
- Storage Drivers:
- "aufs":
- CONFIG_AUFS_FS: missing
- "btrfs":
- CONFIG_BTRFS_FS: enabled
- CONFIG_BTRFS_FS_POSIX_ACL: enabled
- "devicemapper":
- CONFIG_BLK_DEV_DM: enabled
- CONFIG_DM_THIN_PROVISIONING: enabled
- "overlay":
- CONFIG_OVERLAY_FS: enabled
- "zfs":
- /dev/zfs: missing
- zfs command: missing
- zpool command: missing
Limits:
- /proc/sys/kernel/keys/root_maxkeys: 1000000 |
Anyone that has run into this before?
_________________
From Gentoo with love |
|
| Back to top |
|
 |
Pol
Tux's lil' helper
Joined: 01 May 2003
Posts: 113
|
| Posted: Sun Nov 17, 2019 9:23 pm Post subject: |
|
|
| Yes, I'm having the same trouble. |
|
| Back to top |
|
|
Pol
Tux's lil' helper
Joined: 01 May 2003
Posts: 113
|
| Posted: Sun Nov 17, 2019 9:35 pm Post subject: |
|
|
I added:
| Code: | | systemd.unified_cgroup_hierarchy=0 |
In on property | Code: | | GRUB_CMDLINE_LINUX_DEFAULT |
My line now looks like:
| Code: | | GRUB_CMDLINE_LINUX_DEFAULT="nomodeset i915.modeset=1 vga=792 splash i915_enable_rc6=1 i915_enable_fbc=1 thinkpad_acpi.experimental=1 thinkpad_acpi.fan_control=1 acpi_osi=Linux quiet systemd.unified_cgroup_hierarchy=0" |
Hope you'll find a solution. |
|
| Back to top |
|
|
|
Other Things Gentoo
