View previous topic :: View next topic |
Author |
Message |
femtotron n00b
Joined: 28 Jun 2016 Posts: 32
|
Posted: Wed May 24, 2017 9:23 am Post subject: |
|
|
Salut netfab,
Je suis toujours en mode root quand je lance startx.
La commande Code: | ls -l ~/.Xauthority ~/.serverauth* | me donne ceci: Code: | ls: cannot access '/root/.serverauth*': No such file or directory
-rw------- 1 root root 0 May 23 23:01 /root/.Xauthority
|
et la commande lsmod donne : Code: |
Module Size Used by
cfg80211 585728 0
rfkill 24576 1 cfg80211
nvidia_drm 40960 0
nvidia_modeset 790528 1 nvidia_drm
nouveau 1568768 0
snd_hda_codec_hdmi 45056 4
snd_hda_codec_realtek 86016 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
ttm 98304 1 nouveau
drm_kms_helper 155648 2 nouveau,nvidia_drm
x86_pkg_temp_thermal 16384 0
coretemp 16384 0
drm 360448 5 nouveau,ttm,nvidia_drm,drm_kms_helper
nvidia 11522048 1 nvidia_modeset
snd_hda_intel 36864 0
kvm 581632 0
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
snd_hwdep 16384 1 snd_hda_codec
fb_sys_fops 16384 1 drm_kms_helper
snd_pcm 102400 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
iTCO_wdt 16384 0
irqbypass 16384 1 kvm
mxm_wmi 16384 1 nouveau
iTCO_vendor_support 16384 1 iTCO_wdt
e1000e 245760 0
crc32c_intel 24576 0
nvidiafb 49152 0
snd_timer 32768 1 snd_pcm
snd 86016 8 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek,snd_pcm
fb_ddc 16384 1 nvidiafb
ghash_clmulni_intel 16384 0
vgastate 20480 1 nvidiafb
i2c_i801 24576 0
serio_raw 16384 0
pcspkr 16384 0
lpc_ich 24576 0
cryptd 24576 1 ghash_clmulni_intel
i2c_smbus 16384 1 i2c_i801
soundcore 16384 1 snd
mfd_core 16384 1 lpc_ich
video 40960 1 nouveau
wmi 16384 2 mxm_wmi,nouveau
xts 16384 0
gf128mul 16384 1 xts
cbc 16384 0
sha256_generic 24576 0
iscsi_tcp 20480 0
libiscsi_tcp 24576 1 iscsi_tcp
libiscsi 53248 2 libiscsi_tcp,iscsi_tcp
scsi_transport_iscsi 98304 2 libiscsi,iscsi_tcp
vmxnet3 57344 0
virtio_net 28672 0
virtio_ring 24576 1 virtio_net
virtio 16384 1 virtio_net
tg3 159744 0
libphy 53248 1 tg3
sky2 61440 0
r8169 81920 0
pcnet32 45056 0
mii 16384 2 r8169,pcnet32
igb 204800 0
ptp 20480 3 tg3,igb,e1000e
pps_core 16384 1 ptp
dca 16384 1 igb
i2c_algo_bit 16384 3 nvidiafb,igb,nouveau
i2c_core 65536 10 fb_ddc,nvidiafb,i2c_algo_bit,nvidia,igb,i2c_i801,nouveau,i2c_smbus,drm_kms_helper,drm
e1000 143360 0
bnx2 81920 0
atl1c 49152 0
fuse 98304 1
xfs 1171456 0
nfs 233472 0
lockd 73728 1 nfs
grace 16384 1 lockd
sunrpc 303104 2 lockd,nfs
fscache 61440 1 nfs
jfs 172032 0
reiserfs 233472 0
btrfs 1028096 0
ext4 565248 2
jbd2 102400 1 ext4
ext2 73728 0
mbcache 16384 4 ext4,ext2
linear 16384 0
raid10 49152 0
raid1 36864 0
raid0 20480 0
dm_raid 40960 0
raid456 102400 1 dm_raid
async_raid6_recov 20480 1 raid456
async_memcpy 16384 2 raid456,async_raid6_recov
libcrc32c 16384 2 xfs,raid456
async_pq 16384 2 raid456,async_raid6_recov
async_xor 16384 3 async_pq,raid456,async_raid6_recov
xor 24576 2 async_xor,btrfs
async_tx 16384 5 async_xor,async_pq,raid456,async_memcpy,async_raid6_recov
raid6_pq 110592 4 async_pq,btrfs,raid456,async_raid6_recov
dm_snapshot 40960 0
dm_bufio 28672 1 dm_snapshot
dm_crypt 28672 0
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
dm_log 20480 2 dm_mirror,dm_region_hash
dm_mod 114688 6 dm_raid,dm_mirror,dm_log,dm_bufio,dm_crypt,dm_snapshot
firewire_core 65536 0
crc_itu_t 16384 1 firewire_core
sl811_hcd 24576 0
xhci_pci 16384 0
xhci_hcd 188416 1 xhci_pci
usb_storage 69632 0
aic94xx 86016 0
libsas 73728 1 aic94xx
lpfc 643072 0
qla2xxx 626688 0
megaraid_sas 131072 0
megaraid_mbox 36864 0
megaraid_mm 20480 1 megaraid_mbox
aacraid 102400 0
sx8 24576 0
hpsa 98304 0
cciss 114688 0
3w_9xxx 45056 0
3w_xxxx 36864 0
3w_sas 28672 0
mptsas 61440 0
scsi_transport_sas 45056 4 libsas,hpsa,mptsas,aic94xx
mptfc 24576 0
scsi_transport_fc 57344 3 lpfc,qla2xxx,mptfc
mptspi 24576 0
mptscsih 40960 3 mptfc,mptsas,mptspi
mptbase 102400 4 mptscsih,mptfc,mptsas,mptspi
imm 20480 0
parport 49152 1 imm
sym53c8xx 81920 0
initio 28672 0
arcmsr 45056 0
aic7xxx 122880 0
aic79xx 135168 0
scsi_transport_spi 32768 4 aic79xx,aic7xxx,sym53c8xx,mptspi
sr_mod 24576 0
cdrom 61440 1 sr_mod
sg 36864 0
sd_mod 49152 4
pdc_adma 16384 0
sata_inic162x 20480 0
sata_mv 32768 0
ata_piix 36864 0
ahci 36864 3
libahci 32768 1 ahci
sata_qstor 16384 0
sata_vsc 16384 0
sata_uli 16384 0
sata_sis 16384 0
sata_sx4 20480 0
sata_nv 28672 0
sata_via 20480 0
sata_svw 16384 0
sata_sil24 20480 0
sata_sil 16384 0
sata_promise 20480 0
pata_via 16384 0
pata_jmicron 16384 0
pata_marvell 16384 0
pata_sis 20480 1 sata_sis
pata_netcell 16384 0
pata_pdc202xx_old 16384 0
pata_atiixp 16384 0
pata_amd 20480 0
pata_ali 16384 0
pata_it8213 16384 0
pata_pcmcia 20480 0
pata_serverworks 16384 0
pata_oldpiix 16384 0
pata_artop 16384 0
pata_it821x 20480 0
pata_hpt3x2n 16384 0
pata_hpt3x3 16384 0
pata_hpt37x 20480 0
pata_hpt366 16384 0
pata_cmd64x 16384 0
pata_sil680 16384 0
pata_pdc2027x 16384 0
|
et quand je lance dmesg j'ai effectivement un message Code: |
nvidia: no symbol version for module_layout | qui apparaît.
Merci |
|
Back to top |
|
|
netfab Veteran
Joined: 03 Mar 2005 Posts: 1897 Location: 127.0.0.1
|
Posted: Wed May 24, 2017 9:40 am Post subject: |
|
|
Quote: |
Module Size Used by
cfg80211 585728 0
rfkill 24576 1 cfg80211
nvidia_drm 40960 0
nvidia_modeset 790528 1 nvidia_drm
nouveau 1568768 0
|
nouveau est chargé, donc le pilote nvidia propriétaire ne fonctionnera pas.
Si tu veux utiliser le module nvidia proprio, tu dois :
- soit blacklister le module nouveau de façon à ce qu'il ne se charge pas au démarrage :
Code: |
$ cat /etc/modprobe.d/blacklist.conf
blacklist nouveau
|
soit ajouter le paramètre nouveau.modeset=0 aux paramètres du kernel dans le fichier de configuration de ton bootloader (avec grub2 çà se passe dans /etc/default/grub)
Je n'ai jamais essayé la méthode 2, si tu essayes, peux-tu donner un retour ? |
|
Back to top |
|
|
femtotron n00b
Joined: 28 Jun 2016 Posts: 32
|
Posted: Wed May 24, 2017 10:01 am Post subject: |
|
|
Salut,
Apparamment rien ne change...
Je vais réinstaller gentoo et je retournerai pour vous donner des nouvelles... |
|
Back to top |
|
|
sebB l33t
Joined: 02 Mar 2011 Posts: 806 Location: S.O. France
|
Posted: Wed May 24, 2017 10:03 am Post subject: |
|
|
Réinstaller ne sert à rien.
Si tu reproduis à chaque fois les mêmes erreurs, ça ne changera rien.
Qu'est ce qui fait que tu as nouveau?
Après avoir suivit le post de netfab, tu as toujours nouveau dans les modules?
Pourquoi lancer startx en root? |
|
Back to top |
|
|
femtotron n00b
Joined: 28 Jun 2016 Posts: 32
|
Posted: Tue May 30, 2017 1:27 pm Post subject: |
|
|
Re-Bonjour Messieurs,
J'ai enfin reglé mon problème de lancement gràce à un tuto que j'aie trouvé sur youtube (utilisateur:msjche). Mais j'ai quand même encore un petit soucis...
Mon problème viens du module vicious que j'aie installé avec awesome. Pour ceux qui connaissent le module vicious peuvent me dire ce que les messages suivants veulent dire :
Code: |
/usr/share/awesome/lib/vicious/init.lua:70: in function 'update'
/usr/share/awesome/lib/vicious/init.lua:158: in function 'update'
/usr/share/awesome/lib/vicious/init.lua:135: in function 'regregister'
|
Merci d'avance |
|
Back to top |
|
|
El_Goretto Moderator
Joined: 29 May 2004 Posts: 3169 Location: Paris
|
Posted: Tue May 30, 2017 3:14 pm Post subject: |
|
|
Bonjour femtotron,
Afin que tout le monde puisse en profiter, peux-tu s'il-te-plaît expliciter (rapidement) ici la cause de ton problème ainsi que ce que tu as fait pour le résoudre?
Quant au message d'erreur d'awesome/vicious, il semble être incomplet.
En passant, peux-tu s'il te plaît mettre le titre de ton thread au bon format? (cf le thread en post-it ** COMMENT POSTER ET OBTENIR DE L'AIDE ? ** qui amène à celui-ci). _________________ -TrueNAS & jails: µ-serv Gen8 E3-1260L, 16Go ECC + µ-serv N40L, 10Go ECC
-Réseau: APU2C4 (OpenWRT) + GS726Tv3 + 2x GS108Tv2 + Archer C5v1 (OpenWRT) |
|
Back to top |
|
|
femtotron n00b
Joined: 28 Jun 2016 Posts: 32
|
Posted: Sun Jun 04, 2017 9:25 am Post subject: |
|
|
Bonjour El_Goretto
J'ai juste suivi les tutos de msjche https://www.youtube.com/watch?v=vdyDqQZYEAs
et la solution à mon dernier problème venait de la incompatibilité d'awesome. J'avais installé la dernière version alors je devais installé la version 3.5.x pour que la configuration https://github.com/msjche que j'ai récupéré soit fonctionnelle.
Après il faut bidouillé un peut pour les polices de caracteres.
Si vous avez des questions concernant la configuration faite par msjche il vous suffit simplement de poster votre question en commentaire sous la vidéo il vous répondra rapidement.
Je vous remercie d'avoir consacré votre temps pour moi.
Je remercie aussi à msjche pour son aide et sa configuration awesome. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|