Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Problema audio (dopo aggiornamento) [Risolto]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
saverik
Apprentice
Apprentice


Joined: 18 Oct 2008
Posts: 270

PostPosted: Sun Feb 12, 2017 2:58 pm    Post subject: Problema audio (dopo aggiornamento) [Risolto] Reply with quote

Salve
dopo aggiornamento l'audio funziona solo per un secondo poi più nulla.
Ho provato a reinstallare alsa,pulseaudio....
ma nulla.
Il driver è configurato nel kernel.
_________________
Elitebook G840_G3 cpu i5-6300u ,16GbRam,ToshibaNvme512Gb
Linux= Gentoo64bit+xfce4+LightDm+Openrc


Last edited by saverik on Fri Apr 07, 2017 8:40 am; edited 1 time in total
Back to top
View user's profile Send private message
fedeliallalinea
Bodhisattva
Bodhisattva


Joined: 08 Mar 2003
Posts: 21362
Location: here

PostPosted: Mon Feb 13, 2017 8:01 am    Post subject: Reply with quote

Puoi postare un aplay -l?
dmesg dice qualcosa di utile?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
saverik
Apprentice
Apprentice


Joined: 18 Oct 2008
Posts: 270

PostPosted: Mon Feb 13, 2017 6:55 pm    Post subject: Reply with quote

ecco :

Code:


saverik@EliteBook ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD81B1X5 Analog [92HD81B1X5 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: pcsp [pcsp], device 0: pcspeaker [pcsp]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


saverik@EliteBook ~ $




dmesg:

Code:


[ 0.000000] BRK [0x02055000, 0x02055fff] PGTABLE
[ 0.000000] BRK [0x02056000, 0x02056fff] PGTABLE
[ 0.000000] BRK [0x02057000, 0x02057fff] PGTABLE
[ 0.000000] BRK [0x02058000, 0x02058fff] PGTABLE
[ 0.000000] BRK [0x02059000, 0x02059fff] PGTABLE
[ 0.000000] BRK [0x0205a000, 0x0205afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34f13000-0x36780fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2F60 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000BCFFE120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 161C 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BCFD1000 025C67 (v02 HPQOEM 161C 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BCF88000 000040
[ 0.000000] ACPI: FACS 0x00000000BCF88000 000040
[ 0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 161C 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 161C 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 161C 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 161C 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BCFCE000 000283 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BCFCC000 0007CE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BCFCB000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: DMAR 0x00000000BCFCA000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 161C 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bc6bdfff]
[ 0.000000] node 0: [mem 0x00000000bcfff000-0x00000000bcffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023dffffff]
[ 0.000000] On node 0 totalpages: 2074204
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 157 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11995 pages used for memmap
[ 0.000000] DMA32 zone: 767679 pages, LIFO batch:31
[ 0.000000] Normal zone: 20352 pages used for memmap
[ 0.000000] Normal zone: 1302528 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc6be000-0xbcebdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbcebe000-0xbcfbdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbcfbe000-0xbcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88023dc00000 s92504 r8192 d30376 u262144
[ 0.000000] pcpu-alloc: s92504 r8192 d30376 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041636
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-4.4.39-gentoo root=UUID=052d8fdd-b297-4645-beb2-5e92cf4f45eb ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 8043692K/8296816K available (7704K kernel code, 1339K rwdata, 3904K rodata, 1320K init, 1736K bss, 253124K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2494.462 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.92 BogoMIPS (lpj=2494462)
[ 0.000182] pid_max: default: 32768 minimum: 301
[ 0.000262] ACPI: Core revision 20150930
[ 0.011969] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.012142] Security Framework initialized
[ 0.012217] SELinux: Initializing.
[ 0.012299] SELinux: Starting in permissive mode
[ 0.012321] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012401] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012713] Initializing cgroup subsys io
[ 0.012790] Initializing cgroup subsys memory
[ 0.012872] Initializing cgroup subsys devices
[ 0.012948] Initializing cgroup subsys freezer
[ 0.013022] Initializing cgroup subsys net_cls
[ 0.013096] Initializing cgroup subsys perf_event
[ 0.013191] CPU: Physical Processor ID: 0
[ 0.013263] CPU: Processor Core ID: 0
[ 0.013336] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.013411] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.013502] mce: CPU supports 7 MCE banks
[ 0.013584] CPU0: Thermal monitoring enabled (TM1)
[ 0.013664] process: using mwait in idle threads
[ 0.013739] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.013814] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.014323] Freeing SMP alternatives memory: 28K (ffffffff81e9a000 - ffffffff81ea1000)
[ 0.015426] ftrace: allocating 30156 entries in 118 pages
[ 0.029980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040067] TSC deadline timer enabled
[ 0.040071] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.040328] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.040654] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.040765] ... version: 3
[ 0.040840] ... bit width: 48
[ 0.040916] ... generic registers: 4
[ 0.040992] ... value mask: 0000ffffffffffff
[ 0.041068] ... max period: 00007fffffffffff
[ 0.041148] ... fixed-purpose events: 3
[ 0.041224] ... event mask: 000000070000000f
[ 0.041927] x86: Booting SMP configuration:
[ 0.042004] .... node #0, CPUs: #1
[ 0.044548] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.044826] #2 #3
[ 0.049608] x86: Booted up 1 node, 4 CPUs
[ 0.050448] smpboot: Total of 4 processors activated (19955.69 BogoMIPS)
[ 0.053235] devtmpfs: initialized
[ 0.055952] PM: Registering ACPI NVS region [mem 0xbcebe000-0xbcfbdfff] (1048576 bytes)
[ 0.056159] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.056538] NET: Registered protocol family 16
[ 0.060092] cpuidle: using governor ladder
[ 0.064103] cpuidle: using governor menu
[ 0.064268] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.064380] ACPI: bus type PCI registered
[ 0.064511] PCI: Using configuration type 1 for base access
[ 0.064697] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.064809] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.064888] mtrr: probably your BIOS does not setup all CPUs.
[ 0.064966] mtrr: corrected configuration.
[ 0.070519] ACPI: Added _OSI(Module Device)
[ 0.070598] ACPI: Added _OSI(Processor Device)
[ 0.070674] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.070750] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.074235] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.081053] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.088917] ACPI: Dynamic OEM Table Load:
[ 0.089077] ACPI: SSDT 0xFFFF880234228800 00069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.089844] ACPI: Dynamic OEM Table Load:
[ 0.090001] ACPI: SSDT 0xFFFF8802342C6C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.090701] ACPI: Dynamic OEM Table Load:
[ 0.090858] ACPI: SSDT 0xFFFF880234088000 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.092024] ACPI : EC: EC started
[ 0.526600] ACPI: Interpreter enabled
[ 0.526694] ACPI: (supports S0 S3 S4 S5)
[ 0.526770] ACPI: Using IOAPIC for interrupt routing
[ 0.526869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.528574] ACPI: Power Resource [APPR] (off)
[ 0.530218] ACPI: Power Resource [COMP] (off)
[ 0.530550] ACPI: Power Resource [LPP] (on)
[ 0.533963] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.534045] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.534499] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.534928] PCI host bridge to bus 0000:00
[ 0.535007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.535087] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.535168] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.535281] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window]
[ 0.535393] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[ 0.535503] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 0.535615] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.535698] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.535784] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.535797] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
[ 0.535803] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.535807] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.535907] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.535940] pci 0000:00:16.0: reg 0x10: [mem 0xd4824000-0xd482400f 64bit]
[ 0.536011] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.536090] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.536116] pci 0000:00:19.0: reg 0x10: [mem 0xd4800000-0xd481ffff]
[ 0.536125] pci 0000:00:19.0: reg 0x14: [mem 0xd482a000-0xd482afff]
[ 0.536134] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f]
[ 0.536193] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.536232] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.536353] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.536382] pci 0000:00:1a.0: reg 0x10: [mem 0xd4829000-0xd48293ff]
[ 0.536464] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.536502] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.536620] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.536645] pci 0000:00:1b.0: reg 0x10: [mem 0xd4820000-0xd4823fff 64bit]
[ 0.536708] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.536780] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.536861] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.536934] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.537014] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.537053] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.537172] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.537253] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.537292] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.537410] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.537491] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.537530] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.537652] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.537732] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.537771] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.537887] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.537916] pci 0000:00:1d.0: reg 0x10: [mem 0xd4828000-0xd48283ff]
[ 0.537996] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.538034] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.538153] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.538328] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.538352] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.538360] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.538368] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.538380] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.538388] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
[ 0.538396] pci 0000:00:1f.2: reg 0x24: [mem 0xd4827000-0xd48277ff]
[ 0.538434] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.538545] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.538626] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
[ 0.538690] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[ 0.538769] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.538773] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.538854] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
[ 0.538916] pci 0000:23:00.0: reg 0x10: [mem 0xd4600000-0xd46007ff]
[ 0.538939] pci 0000:23:00.0: reg 0x14: [mem 0xd4605000-0xd46050ff]
[ 0.539191] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
[ 0.539246] pci 0000:23:00.1: reg 0x10: [mem 0xd4604000-0xd46040ff]
[ 0.539355] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
[ 0.539490] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
[ 0.539544] pci 0000:23:00.2: reg 0x10: [mem 0xd4603000-0xd46030ff]
[ 0.542449] pci 0000:00:1c.2: PCI bridge to [bus 23]
[ 0.542557] pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
[ 0.542750] pci 0000:24:00.0: [8086:0085] type 00 class 0x028000
[ 0.543008] pci 0000:24:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
[ 0.543686] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 0.543778] pci 0000:24:00.0: System wakeup disabled by ACPI
[ 0.546551] pci 0000:00:1c.3: PCI bridge to [bus 24]
[ 0.546632] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 0.546708] pci 0000:25:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.546789] pci 0000:25:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit]
[ 0.546997] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
[ 0.549446] pci 0000:00:1c.7: PCI bridge to [bus 25]
[ 0.549564] pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
[ 0.549598] pci_bus 0000:00: on NUMA node 0
[ 0.550437] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.551030] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.551625] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.552221] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.552885] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.553478] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.554179] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.554841] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.555817] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.556025] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.556186] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.556266] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.556379] vgaarb: loaded
[ 0.556453] vgaarb: bridge control possible 0000:00:02.0
[ 0.556613] SCSI subsystem initialized
[ 0.556699] libata version 3.00 loaded.
[ 0.556708] ACPI: bus type USB registered
[ 0.556802] usbcore: registered new interface driver usbfs
[ 0.556889] usbcore: registered new interface driver hub
[ 0.556984] usbcore: registered new device driver usb
[ 0.557123] Advanced Linux Sound Architecture Driver Initialized.
[ 0.557218] PCI: Using ACPI for IRQ routing
[ 0.557295] PCI: pci_cache_line_size set to 64 bytes
[ 0.557408] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.557409] e820: reserve RAM buffer [mem 0xbc6be000-0xbfffffff]
[ 0.557411] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[ 0.557412] e820: reserve RAM buffer [mem 0x23e000000-0x23fffffff]
[ 0.557538] NetLabel: Initializing
[ 0.557614] NetLabel: domain hash size = 128
[ 0.557690] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.557779] NetLabel: unlabeled traffic allowed by default
[ 0.557896] amd_nb: Cannot enumerate AMD northbridges
[ 0.557989] clocksource: Switched to clocksource hpet
[ 0.566953] pnp: PnP ACPI init
[ 0.567207] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.567288] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 0.567369] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.567449] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.567530] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.567610] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.567689] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.567769] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.567850] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.567930] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.568020] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.568149] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.568212] system 00:02: [io 0x0200-0x027f] has been reserved
[ 0.568293] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.568371] system 00:02: [io 0xffff] has been reserved
[ 0.568449] system 00:02: [io 0xffff] has been reserved
[ 0.568528] system 00:02: [io 0x0400-0x047f] could not be reserved
[ 0.568608] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.568686] system 00:02: [io 0xef80-0xef9f] has been reserved
[ 0.568767] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.568792] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.569164] pnp 00:04: [dma 0 disabled]
[ 0.569232] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.569253] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.569277] pnp 00:06: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active)
[ 0.569664] pnp: PnP ACPI: found 7 devices
[ 0.574295] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.574416] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
[ 0.574549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000
[ 0.574575] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.574577] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.574584] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
[ 0.574697] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.574779] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff]
[ 0.574866] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[ 0.574945] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 0.575033] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.575116] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
[ 0.575233] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4608000-0xd460ffff pref]
[ 0.575344] pci 0000:00:1c.2: PCI bridge to [bus 23]
[ 0.575425] pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff]
[ 0.575512] pci 0000:00:1c.3: PCI bridge to [bus 24]
[ 0.575592] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 0.575678] pci 0000:00:1c.7: PCI bridge to [bus 25]
[ 0.575759] pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff]
[ 0.575846] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.575847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.575849] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.575851] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window]
[ 0.575852] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[ 0.575854] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[ 0.575856] pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff]
[ 0.575858] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 0.575860] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
[ 0.575861] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
[ 0.575863] pci_bus 0000:23: resource 1 [mem 0xd4600000-0xd46fffff]
[ 0.575865] pci_bus 0000:24: resource 1 [mem 0xd4500000-0xd45fffff]
[ 0.575867] pci_bus 0000:25: resource 1 [mem 0xd4400000-0xd44fffff]
[ 0.575927] NET: Registered protocol family 2
[ 0.576180] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.576383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.576586] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.576684] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.576786] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.576954] NET: Registered protocol family 1
[ 0.577056] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.577791] PCI: CLS 64 bytes, default 64
[ 0.577847] Trying to unpack rootfs image as initramfs...
[ 3.602502] Freeing initrd memory: 25016K (ffff880034f13000 - ffff880036781000)
[ 3.602624] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.602704] software IO TLB [mem 0xb86be000-0xbc6be000] (64MB) mapped at [ffff8800b86be000-ffff8800bc6bdfff]
[ 3.602892] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 3.603004] hw unit of domain pp0-core 2^-16 Joules
[ 3.603082] hw unit of domain package 2^-16 Joules
[ 3.603158] hw unit of domain pp1-gpu 2^-16 Joules
[ 3.603592] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 3.603717] audit: initializing netlink subsys (disabled)
[ 3.603810] audit: type=2000 audit(1487012862.588:1): initialized
[ 3.604127] Initialise system trusted keyring
[ 3.604319] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.604547] VFS: Disk quotas dquot_6.6.0
[ 3.604643] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.604943] SELinux: Registering netfilter hooks
[ 3.605514] Key type asymmetric registered
[ 3.605593] Asymmetric key parser 'x509' registered
[ 3.605688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.605837] io scheduler noop registered
[ 3.605914] io scheduler deadline registered
[ 3.606003] io scheduler cfq registered (default)
[ 3.606820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.607329] Linux agpgart interface v0.103
[ 3.636888] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 3.781757] intel_idle: MWAIT substates: 0x21120
[ 3.781760] intel_idle: v0.4.1 model 0x2A
[ 3.781761] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.781941] ipmi message handler version 39.2
[ 3.782028] IPMI System Interface driver.
[ 3.782124] ipmi_si: Unable to find any System Interface(s)
[ 3.788918] ACPI: AC Adapter [AC] (off-line)
[ 3.789051] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 3.789165] ACPI: Sleep Button [SLPB]
[ 3.789275] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.789405] ACPI: Lid Switch [LID]
[ 3.789513] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.789623] ACPI: Power Button [PWRF]
[ 3.817523] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.817603] ACPI: Thermal Zone [CPUZ] (41 C)
[ 3.841263] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.841342] ACPI: Thermal Zone [GFXZ] (0 C)
[ 3.856110] thermal LNXTHERM:02: registered as thermal_zone2
[ 3.856188] ACPI: Thermal Zone [EXTZ] (44 C)
[ 3.870869] thermal LNXTHERM:03: registered as thermal_zone3
[ 3.870948] ACPI: Thermal Zone [LOCZ] (18 C)
[ 3.885809] thermal LNXTHERM:04: registered as thermal_zone4
[ 3.885895] ACPI: Thermal Zone [BATZ] (20 C)
[ 3.886224] thermal LNXTHERM:05: registered as thermal_zone5
[ 3.886303] ACPI: Thermal Zone [PCHZ] (0 C)
[ 3.886404] GHES: HEST is not enabled!
[ 3.886494] [drm] Initialized drm 1.1.0 20060810
[ 3.887401] [drm] Memory usable by graphics device = 2048M
[ 3.887480] [drm] Replacing VGA console driver
[ 3.888089] Console: switching to colour dummy device 80x25
[ 3.894441] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.894446] [drm] Driver supports precise vblank timestamp query.
[ 3.894668] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.916150] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.918678] acpi device:0b: registered as cooling_device4
[ 3.918774] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3
[ 3.918802] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 3.921899] brd: module loaded
[ 3.923175] loop: module loaded
[ 3.923204] ahci 0000:00:1f.2: version 3.0
[ 3.923422] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.927489] fbcon: inteldrmfb (fb0) is primary device
[ 3.932518] ACPI: Battery Slot [BAT0] (battery present)
[ 3.932581] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.933887] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 3.933894] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.942551] scsi host0: ahci
[ 3.942879] scsi host1: ahci
[ 3.943169] scsi host2: ahci
[ 3.943317] scsi host3: ahci
[ 3.943448] scsi host4: ahci
[ 3.943556] scsi host5: ahci
[ 3.943599] ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 25
[ 3.943602] ata2: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827180 irq 25
[ 3.943602] ata3: DUMMY
[ 3.943604] ata4: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827280 irq 25
[ 3.943606] ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 25
[ 3.943609] ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 25
[ 3.943757] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.943761] ehci-pci: EHCI PCI platform driver
[ 3.943922] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.943970] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.943981] ehci-pci 0000:00:1a.0: debug port 2
[ 3.947881] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.947890] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4829000
[ 3.953827] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.953873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.953874] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.953876] usb usb1: Product: EHCI Host Controller
[ 3.953877] usb usb1: Manufacturer: Linux 4.4.39-gentoo ehci_hcd
[ 3.953878] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.953995] hub 1-0:1.0: USB hub found
[ 3.954000] hub 1-0:1.0: 3 ports detected
[ 3.954256] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.954299] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.954309] ehci-pci 0000:00:1d.0: debug port 2
[ 3.958193] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.958197] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4828000
[ 3.963828] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.963867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.963868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.963869] usb usb2: Product: EHCI Host Controller
[ 3.963870] usb usb2: Manufacturer: Linux 4.4.39-gentoo ehci_hcd
[ 3.963871] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.963976] hub 2-0:1.0: USB hub found
[ 3.963980] hub 2-0:1.0: 3 ports detected
[ 3.964112] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.964118] ohci-pci: OHCI PCI platform driver
[ 3.964128] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.964174] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.966026] i8042: Detected active multiplexing controller, rev 1.1
[ 3.966733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.966736] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.966766] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.966790] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.966828] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.966929] mousedev: PS/2 mouse device common for all mice
[ 3.967188] rtc_cmos 00:03: RTC can wake from S4
[ 3.967320] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.967346] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.967362] Intel P-state driver initializing.
[ 3.967745] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.968047] usbcore: registered new interface driver usbhid
[ 3.968048] usbhid: USB HID core driver
[ 3.969193] drop_monitor: Initializing network drop monitor service
[ 3.969456] Initializing XFRM netlink socket
[ 3.969624] NET: Registered protocol family 10
[ 3.970170] NET: Registered protocol family 17
[ 3.970666] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[ 3.970686] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[ 3.970709] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[ 3.970728] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[ 3.970858] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.971316] registered taskstats version 1
[ 3.971349] Loading compiled-in X.509 certificates
[ 3.974339] Loaded X.509 cert 'Build time autogenerated kernel key: 1972baf047166491274e26a8ed3cdb6dbd9bcab2'
[ 3.979833] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 3.979839] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 3.979842] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 3.979845] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 3.979848] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 3.979853] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 3.979858] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 3.979862] snd_hda_codec_idt hdaudioC0D0: Line=0xf
[ 3.997406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.007712] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.008860] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.008985] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.009101] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.009220] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.009340] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.009456] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.009571] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.247901] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.248933] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.249031] ata1.00: ATA-9: CT240BX200SSD1, MU02.6, max UDMA/133
[ 4.249035] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 4.249666] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.250038] ata1.00: configured for UDMA/133
[ 4.255900] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.265915] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.305122] rtc_cmos 00:03: setting system clock to 2017-02-13 19:07:43 UTC (1487012863)
[ 4.305306] ALSA device list:
[ 4.305308] #0: HDA Intel PCH at 0xd4820000 irq 26
[ 4.370454] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.370458] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.371039] hub 1-1:1.0: USB hub found
[ 4.371245] hub 1-1:1.0: 6 ports detected
[ 4.380211] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.380215] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.380704] hub 2-1:1.0: USB hub found
[ 4.380862] hub 2-1:1.0: 8 ports detected
[ 4.604845] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 4.604853] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[ 4.605314] Console: switching to colour frame buffer device 200x56
[ 4.657823] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 4.735839] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.741623] scsi 0:0:0:0: Direct-Access ATA CT240BX200SSD1 .6 PQ: 0 ANSI: 5
[ 4.748961] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d
[ 4.750450] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.751891] usb 2-1.6: Product: HP Integrated Module
[ 4.753321] usb 2-1.6: Manufacturer: Broadcom Corp
[ 4.978946] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input17
[ 5.049873] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.057047] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.060071] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 5.068749] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.072263] ata2.00: configured for UDMA/100
[ 5.088523] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 5.414853] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.605174] clocksource: Switched to clocksource tsc
[ 5.722856] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.801518] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
[ 5.874358] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122
[ 5.922819] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input20
[ 6.030820] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.037991] Freeing unused kernel memory: 1320K (ffffffff81d50000 - ffffffff81e9a000)
[ 6.041651] Write protecting the kernel read-only data: 12288k
[ 6.046022] Freeing unused kernel memory: 476K (ffff880001789000 - ffff880001800000)
[ 6.050699] Freeing unused kernel memory: 192K (ffff880001bd0000 - ffff880001c00000)
[ 6.497507] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 6.497511] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.497574] sd 0:0:0:0: [sda] Write Protect is off
[ 6.497577] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.497595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.498598] sda: sda1 sda2 sda3 sda4
[ 6.498886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.503070] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.503221] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.530529] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.530540] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.530823] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.723082] imm: Version 2.05 (for Linux 2.4.0)
[ 6.788638] Fusion MPT base driver 3.04.20
[ 6.788642] Copyright (c) 1999-2008 LSI Corporation
[ 6.799704] Fusion MPT SPI Host driver 3.04.20
[ 6.809434] Fusion MPT FC Host driver 3.04.20
[ 6.819424] Fusion MPT SAS Host driver 3.04.20
[ 6.824399] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 6.829257] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 6.834228] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 6.846602] HP CISS Driver (v 3.6.26)
[ 6.876567] Adaptec aacraid driver 1.2-1[41010]-ms
[ 6.885272] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 6.888041] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 6.897109] megasas: 06.808.16.00-rc1
[ 6.937057] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 6.964194] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[ 6.964197] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 6.988264] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 7.025280] usbcore: registered new interface driver usb-storage
[ 7.046553] xhci_hcd 0000:25:00.0: xHCI Host Controller
[ 7.046604] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3
[ 7.046805] xhci_hcd 0000:25:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 7.047002] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.047004] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.047006] usb usb3: Product: xHCI Host Controller
[ 7.047007] usb usb3: Manufacturer: Linux 4.4.39-gentoo xhci-hcd
[ 7.047008] usb usb3: SerialNumber: 0000:25:00.0
[ 7.047099] hub 3-0:1.0: USB hub found
[ 7.047110] hub 3-0:1.0: 2 ports detected
[ 7.047191] xhci_hcd 0000:25:00.0: xHCI Host Controller
[ 7.047221] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4
[ 7.050218] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.050233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.050235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.050236] usb usb4: Product: xHCI Host Controller
[ 7.050237] usb usb4: Manufacturer: Linux 4.4.39-gentoo xhci-hcd
[ 7.050238] usb usb4: SerialNumber: 0000:25:00.0
[ 7.050324] hub 4-0:1.0: USB hub found
[ 7.050336] hub 4-0:1.0: 2 ports detected
[ 7.298647] raid6: sse2x1 gen() 8000 MB/s
[ 7.315644] raid6: sse2x1 xor() 6175 MB/s
[ 7.332647] raid6: sse2x2 gen() 10089 MB/s
[ 7.349640] raid6: sse2x2 xor() 7054 MB/s
[ 7.366643] raid6: sse2x4 gen() 11644 MB/s
[ 7.383640] raid6: sse2x4 xor() 8757 MB/s
[ 7.383642] raid6: using algorithm sse2x4 gen() 11644 MB/s
[ 7.383643] raid6: .... xor() 8757 MB/s, rmw enabled
[ 7.383644] raid6: using ssse3x2 recovery algorithm
[ 7.385021] xor: automatically using best checksumming function:
[ 7.394638] avx : 22428.000 MB/sec
[ 7.434649] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 7.450430] Btrfs loaded
[ 7.483574] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7.492793] FS-Cache: Loaded
[ 7.521836] RPC: Registered named UNIX socket transport module.
[ 7.521839] RPC: Registered udp transport module.
[ 7.521840] RPC: Registered tcp transport module.
[ 7.521841] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.567306] FS-Cache: Netfs 'nfs' registered for caching
[ 7.601186] usb 3-2: New USB device found, idVendor=045e, idProduct=0745
[ 7.601190] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.601192] usb 3-2: Product: Microsoft® Nano Transceiver v2.0
[ 7.601195] usb 3-2: Manufacturer: Microsoft
[ 7.608427] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.7/0000:25:00.0/usb3/3-2/3-2:1.0/0003:045E:0745.0001/input/input21
[ 7.648690] SGI XFS with ACLs, security attributes, no debug enabled
[ 7.658830] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:25:00.0-2/input0
[ 7.661934] fuse init (API version 7.23)
[ 7.668648] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.7/0000:25:00.0/usb3/3-2/3-2:1.1/0003:045E:0745.0002/input/input22
[ 7.683050] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.683053] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.686342] dca service started, version 1.12.1
[ 7.688765] pps_core: LinuxPPS API ver. 1 registered
[ 7.688768] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.691613] PTP clock support registered
[ 7.704431] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 7.704434] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 7.719780] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:25:00.0-2/input1
[ 7.742832] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[ 7.750543] Loading iSCSI transport class v2.0-870.
[ 7.762234] iscsi: registered transport (tcp)
[ 7.771323] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.7/0000:25:00.0/usb3/3-2/3-2:1.2/0003:045E:0745.0003/input/input23
[ 7.821782] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:25:00.0-2/input2
[ 7.972316] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 7.975861] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.534325] random: lvm: uninitialized urandom read (4 bytes read, 56 bits of entropy available)
[ 9.204153] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.205514] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.205528] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.205553] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.205586] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.205629] random: systemd-udevd: uninitialized urandom read (16 bytes read, 68 bits of entropy available)
[ 9.221897] random: udevadm: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
[ 9.222459] random: udevadm: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
[ 9.234535] random: systemd-udevd: uninitialized urandom read (16 bytes read, 72 bits of entropy available)
[ 9.305984] parport_pc 00:04: reported by Plug and Play ACPI
[ 9.306055] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[ 9.310849] wmi: Mapper loaded
[ 9.313723] hp_accel: hardware type HPB64xx found
[ 9.314376] lis3lv02d: 8 bits 3DC sensor found
[ 9.345753] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 9.345761] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.345765] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.345769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.345770] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.345774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.345776] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 9.345779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.345780] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.350694] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input24
[ 9.362963] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.362967] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.363221] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.399206] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[ 9.408096] input: PC Speaker as /devices/platform/pcspkr/input/input25
[ 9.465801] sdhci: Secure Digital Host Controller Interface driver
[ 9.465805] sdhci: Copyright(c) Pierre Ossman
[ 9.474649] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
[ 9.474773] sdhci-pci 0000:23:00.1: No vmmc regulator found
[ 9.474776] sdhci-pci 0000:23:00.1: No vqmmc regulator found
[ 9.480608] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
[ 9.480633] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 9.480714] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
[ 9.539104] Intel(R) Wireless WiFi driver for Linux
[ 9.539107] Copyright(c) 2003- 2015 Intel Corporation
[ 9.539296] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.552842] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 9.684332] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 9.684338] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:1f:74:f8:12:cf
[ 9.684341] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 9.684384] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 9.727713] ppdev: user-space parallel port driver
[ 9.752811] random: nonblocking pool is initialized
[ 9.759719] iTCO_vendor_support: vendor-support=0
[ 9.780824] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.780866] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.780966] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.781737] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 9.807067] Bluetooth: Core ver 2.21
[ 9.807085] NET: Registered protocol family 31
[ 9.807087] Bluetooth: HCI device and connection manager initialized
[ 9.807091] Bluetooth: HCI socket layer initialized
[ 9.807094] Bluetooth: L2CAP socket layer initialized
[ 9.807102] Bluetooth: SCO socket layer initialized
[ 9.838811] usbcore: registered new interface driver btusb
[ 9.860190] input: HP WMI hotkeys as /devices/virtual/input/input26
[ 9.885123] cfg80211: World regulatory domain updated:
[ 9.885127] cfg80211: DFS Master region: unset
[ 9.885129] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.885132] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.885134] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.885137] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.885139] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.885142] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.885144] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.885146] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.885148] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.891138] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.891142] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 9.891145] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 9.891148] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 9.891245] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 9.900536] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
[ 9.933414] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.937371] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0
[ 10.705215] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.855960] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.749732] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 11.985896] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 11.996095] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 11.996364] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 11.996626] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 11.996729] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 12.265071] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.265349] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.265472] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 12.346058] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 12.348687] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.348978] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.349082] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 12.617601] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.617874] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 12.617978] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 12.695833] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 12.761473] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 12.843376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.843379] Bluetooth: BNEP filters: protocol multicast
[ 12.843384] Bluetooth: BNEP socket layer initialized
[ 13.086893] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[ 13.144335] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[ 23.258653] Bluetooth: RFCOMM TTY layer initialized
[ 23.258670] Bluetooth: RFCOMM socket layer initialized
[ 23.258682] Bluetooth: RFCOMM ver 1.11
[ 24.388823] hrtimer: interrupt took 979860 ns
[ 27.943369] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 27.943636] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 27.943734] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 28.211037] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 28.211271] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[ 28.211366] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[ 28.288656] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 31.478336] wlo1: authenticate with e2:b9:e5:1d:de:c5
[ 31.481484] wlo1: send auth to e2:b9:e5:1d:de:c5 (try 1/3)
[ 31.497921] wlo1: authenticated
[ 31.498428] wlo1: associate with e2:b9:e5:1d:de:c5 (try 1/3)
[ 31.510237] wlo1: associate with e2:b9:e5:1d:de:c5 (try 2/3)
[ 31.511406] wlo1: RX AssocResp from e2:b9:e5:1d:de:c5 (capab=0x11 status=0 aid=6)
[ 31.514126] wlo1: associated
[ 31.514199] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 31.518984] cfg80211: Regulatory domain changed to country: IT
[ 31.518990] cfg80211: DFS Master region: ETSI
[ 31.518993] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 31.518997] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 31.519002] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 31.519006] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 31.519010] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 31.519013] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 31.599870] wlo1: Limiting TX power to 27 (27 - 0) dBm as advertised by e2:b9:e5:1d:de:c5
[ 2209.267733] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 2209.326522] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[ 2209.483205] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
saverik@EliteBook ~ $

Code:


mi sembra ok...
non vedo nessun warning

Comunque e' sempre un casino con l'audio quando aggiorno il kernel...
_________________
Elitebook G840_G3 cpu i5-6300u ,16GbRam,ToshibaNvme512Gb
Linux= Gentoo64bit+xfce4+LightDm+Openrc
Back to top
View user's profile Send private message
antonellocaroli
Apprentice
Apprentice


Joined: 11 Aug 2016
Posts: 230

PostPosted: Tue Feb 14, 2017 3:34 pm    Post subject: Reply with quote

Qundo non senti piú l´audio prova a controllare alsamixer....non é che va in mute?
Back to top
View user's profile Send private message
saverik
Apprentice
Apprentice


Joined: 18 Oct 2008
Posts: 270

PostPosted: Tue Feb 14, 2017 5:47 pm    Post subject: Reply with quote

no non va in mute
si sente il suono per 1 secondo poi più nulla..
in più ho notato che il pop up delvolume non va...solo quello della luminosità.
_________________
Elitebook G840_G3 cpu i5-6300u ,16GbRam,ToshibaNvme512Gb
Linux= Gentoo64bit+xfce4+LightDm+Openrc
Back to top
View user's profile Send private message
saverik
Apprentice
Apprentice


Joined: 18 Oct 2008
Posts: 270

PostPosted: Fri Apr 07, 2017 8:38 am    Post subject: Reply with quote

Risolto

Mancava il file /etc/asound.conf....
(Ma prima senza il file perchè funzionava???) 8O
_________________
Elitebook G840_G3 cpu i5-6300u ,16GbRam,ToshibaNvme512Gb
Linux= Gentoo64bit+xfce4+LightDm+Openrc
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum