Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
WLAN connection issues with TP-Link TL-WN851ND
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
ollonois
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2004
Posts: 130
Location: Germany

PostPosted: Sun Oct 09, 2016 8:30 pm    Post subject: WLAN connection issues with TP-Link TL-WN851ND Reply with quote

Hello,

I tried to get my TP-Link WLAN card TL-WN851ND working but get no connection. As far as I know it uses the ath9k driver
I am using latest stable deblobed hardened sources. Hope I am right that this Chip need no firmware blob.

Code:

# lspci
03:00.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)

Code:

# lsmod
Module                  Size  Used by
ath9k                  73230  0
ath9k_common           24755  1 ath9k
ath9k_hw              386456  2 ath9k_common,ath9k
ath                    19463  3 ath9k_common,ath9k,ath9k_hw
r8169                  67376  0
mii                     5075  1 r8169


Code:

# iw dev
phy#0
        Interface wlp3s0
                ifindex 3
                wdev 0x1
                addr 7e:58:82:42:88:a8
                type managed


Code:

# tree /sys/class/net
/sys/class/net
├── enp2s0 -> ../../devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/enp2s0
├── lo -> ../../devices/virtual/net/lo
└── wlp3s0 -> ../../devices/pci0000:00/0000:00:1e.0/0000:03:00.0/net/wlp3s0


I alway get the message, that the key is wrong, but the passphrase is correct.
AES support is enabled in the kernel.

Code:

wpa_state=SCANNING
address=7e:43:cd:b1:61:61
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
> scan
OK
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SSID-REENABLED id=0 ssid="WLAN"
<3>SME: Trying to authenticate with 5c:49:79:ca:59:d8 (SSID='WLAN' freq=2412 MHz)
<3>Trying to associate with 5c:49:79:ca:59:d8 (SSID='WLAN' freq=2412 MHz)
<3>Associated with 5c:49:79:ca:59:d8
<3>CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
<3>CTRL-EVENT-DISCONNECTED bssid=5c:49:79:ca:59:d8 reason=3 locally_generated=1
<3>CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 5c:49:79:ca:59:d8 (SSID='WLAN' freq=2412 MHz)
<3>Trying to associate with 5c:49:79:ca:59:d8 (SSID='WLAN' freq=2412 MHz)
<3>Associated with 5c:49:79:ca:59:d8
<3>CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
<3>CTRL-EVENT-DISCONNECTED bssid=5c:49:79:ca:59:d8 reason=3 locally_generated=1
<3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
<3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="WLAN" auth_failures=11 duration=120 reason=WRONG_KEY
<3>CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
<3>CTRL-EVENT-SCAN-STARTED
<3>CTRL-EVENT-SCAN-RESULTS
> quit


Maybe I missed something.
Back to top
View user's profile Send private message
charles17
Advocate
Advocate


Joined: 02 Mar 2008
Posts: 2659

PostPosted: Mon Oct 10, 2016 7:05 am    Post subject: Re: WLAN connection issues with TP-Link TL-WN851ND Reply with quote

ollonois wrote:
Code:
<3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect

Suspect you've edited /etc/wpa_supplicant/wpa_supplicant.conf manually? Try using wpa_gui and enter psk there.
Back to top
View user's profile Send private message
ollonois
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2004
Posts: 130
Location: Germany

PostPosted: Mon Oct 10, 2016 8:31 am    Post subject: Re: WLAN connection issues with TP-Link TL-WN851ND Reply with quote

charles17 wrote:
ollonois wrote:
Code:
<3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect

Suspect you've edited /etc/wpa_supplicant/wpa_supplicant.conf manually? Try using wpa_gui and enter psk there.


I tried this first, but with the same result. Just used the cli to get the log messages.
Back to top
View user's profile Send private message
charles17
Advocate
Advocate


Joined: 02 Mar 2008
Posts: 2659

PostPosted: Mon Oct 10, 2016 9:42 am    Post subject: Reply with quote

Would you mind posting your output of dmesg | grep -i '03:00.0\|wlan\|ath\|80211' (replace "ath" with your "Kernel driver in use") and your output from debug mode?
Back to top
View user's profile Send private message
ollonois
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2004
Posts: 130
Location: Germany

PostPosted: Mon Oct 10, 2016 12:04 pm    Post subject: Reply with quote

Here is the output
'katus' is the wlan I want to connect to.

Code:
#  dmesg | grep -i '03:00.0\|wlan\|ath9k\|80211'
[    0.098154] pci 0000:03:00.0: [168c:002d] type 00 class 0x028000
[    0.098181] pci 0000:03:00.0: reg 0x10: [mem 0xd0700000-0xd070ffff]
[    0.098281] pci 0000:03:00.0: System wakeup disabled by ACPI
[    6.247297] ath9k 0000:03:00.0: PCI INT A: no GSI
[    6.552050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.552332] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90000fe0000, irq=11
[    6.553170] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    7.173415] cfg80211: World regulatory domain updated:
[    7.173421] cfg80211:  DFS Master region: unset
[    7.173423] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.173425] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.173427] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.173429] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    7.173431] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.173433] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.173435] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    7.173436] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    7.173438] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    7.187905] cfg80211: Regulatory domain changed to country: CN
[    7.187907] cfg80211:  DFS Master region: FCC
[    7.187909] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.187911] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.187913] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[    7.187915] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)                                                           
[    7.187917] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)                                                                           
[    7.187919] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)                                                                       
[    7.187920] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)                                                                       
[    7.187922] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)                                                                       
[  157.699923] cfg80211: World regulatory domain updated:
[  157.699933] cfg80211:  DFS Master region: unset
[  157.699936] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)                                                         
[  157.699939] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)                                                                           
[  157.699941] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)                                                           
[  157.699943] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)                                                                           
[  157.699945] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)                                                           
[  157.699947] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)                                                           
[  157.699949] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)                                                                           
[  157.699951] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  157.699953] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  162.862179] cfg80211: World regulatory domain updated:
[  162.862184] cfg80211:  DFS Master region: unset
[  162.862186] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  162.862188] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  162.862190] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  162.862192] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  162.862194] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  162.862196] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  162.862198] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  162.862199] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  162.862201] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  172.290393] cfg80211: World regulatory domain updated:
[  172.290397] cfg80211:  DFS Master region: unset
[  172.290399] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  172.290402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  172.290404] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  172.290406] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  172.290408] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  172.290410] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  172.290412] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  172.290413] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  172.290415] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)


Code:
# wpa_supplicant -Dnl80211 -iwlp3s0 -C/var/run/wpa_supplicant/ -c/etc/wpa_supplicant/wpa_supplicant.conf -dd
wpa_supplicant v2.6
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp3s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface '/var/run/wpa_supplicant/' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
update_config=1
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=6):
     6b 61 6b 74 75 73                                 kaktus         
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
proto: 0x2
key_mgmt: 0x2
pairwise: 0x8
auth_alg: 0x1
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 11: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
   id=0 ssid='kaktus'
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlp3s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1e79610
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0505
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e79610 match=0500
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp3s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp3s0: Own MAC address: 26:54:11:6d:44:53
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp3s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp3s0: Setting scan request: 0.100000 sec
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp3s0: Added interface wlp3s0
wlp3s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x1e98230
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x1e98230 after 0.000013 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000030 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 0.815062 seconds
nl80211: Received scan results (2 BSSes)
wlp3s0: BSS: Start scan result update 1
wlp3s0: BSS: Add new id 0 BSSID 5c:49:79:ca:59:d8 SSID 'kaktus' freq 2412
wlp3s0: BSS: Add new id 1 BSSID 08:96:d7:fa:27:0f SSID 'FRITZ!Powerline 540E' freq 2462
BSS: last_scan_res_used=2/32
wlp3s0: New scan results available (own=1 ext=0)
wlp3s0: Radio work 'scan'@0x1e98230 done in 0.829297 seconds
wlp3s0: radio_work_free('scan'@0x1e98230: num_active_works --> 0
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: 5c:49:79:ca:59:d8 ssid='kaktus' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-53 freq=2412  wps
wlp3s0:    skip RSN IE - PTK cipher mismatch
wlp3s0:    reject due to mismatch with WPA/WPA2
wlp3s0: 1: 08:96:d7:fa:27:0f ssid='FRITZ!Powerline 540E' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 freq=2462  wps
wlp3s0:    skip - SSID mismatch
wlp3s0: No suitable network found
wlp3s0: Setting scan request: 5.000000 sec
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
EAPOL: disable timer tick
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x1e98230
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x1e98230 after 0.000012 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000040 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 0.815309 seconds
nl80211: Received scan results (2 BSSes)
wlp3s0: BSS: Start scan result update 2
BSS: last_scan_res_used=2/32
wlp3s0: New scan results available (own=1 ext=0)
wlp3s0: Radio work 'scan'@0x1e98230 done in 0.829455 seconds
wlp3s0: radio_work_free('scan'@0x1e98230: num_active_works --> 0
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: 5c:49:79:ca:59:d8 ssid='kaktus' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-54 freq=2412  wps
wlp3s0:    skip RSN IE - PTK cipher mismatch
wlp3s0:    reject due to mismatch with WPA/WPA2
wlp3s0: 1: 08:96:d7:fa:27:0f ssid='FRITZ!Powerline 540E' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-91 freq=2462  wps
wlp3s0:    skip - SSID mismatch
wlp3s0: No suitable network found
wlp3s0: Setting scan request: 5.000000 sec
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x1e98230
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x1e98230 after 0.000010 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000058 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
Back to top
View user's profile Send private message
ollonois
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2004
Posts: 130
Location: Germany

PostPosted: Mon Oct 10, 2016 12:38 pm    Post subject: Reply with quote

I restarted the interface an ran debug mode again with other results

Code:
# wpa_supplicant -Dnl80211 -iwlp3s0 -C/var/run/wpa_supplicant/ -c/etc/wpa_supplicant/wpa_supplicant.conf -dd
wpa_supplicant v2.6
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp3s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface '/var/run/wpa_supplicant/' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
update_config=1
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=6):
     6b 61 6b 74 75 73                                 kaktus         
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
proto: 0x2
key_mgmt: 0x2
pairwise: 0x10
auth_alg: 0x1
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='kaktus'
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlp3s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x21d1610
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0505
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x21d1610 match=0500
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp3s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp3s0: Own MAC address: 26:54:11:6d:44:53
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp3s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp3s0: Setting scan request: 0.100000 sec
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp3s0: Added interface wlp3s0
wlp3s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x21f0230
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x21f0230 after 0.000016 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000036 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 0.816772 seconds
nl80211: Received scan results (2 BSSes)
wlp3s0: BSS: Start scan result update 1
wlp3s0: BSS: Add new id 0 BSSID 5c:49:79:ca:59:d8 SSID 'kaktus' freq 2412
wlp3s0: BSS: Add new id 1 BSSID 08:96:d7:fa:27:0f SSID 'FRITZ!Powerline 540E' freq 2462
BSS: last_scan_res_used=2/32
wlp3s0: New scan results available (own=1 ext=0)
wlp3s0: Radio work 'scan'@0x21f0230 done in 0.830944 seconds
wlp3s0: radio_work_free('scan'@0x21f0230: num_active_works --> 0
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: 5c:49:79:ca:59:d8 ssid='kaktus' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-58 freq=2412  wps
wlp3s0:    selected based on RSN IE
wlp3s0:    selected BSS 5c:49:79:ca:59:d8 ssid='kaktus'
wlp3s0: Considering connect request: reassociate: 0  selected: 5c:49:79:ca:59:d8  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x21d17d0  current_ssid=(nil)
wlp3s0: Request association with 5c:49:79:ca:59:d8
wlp3s0: Add radio work 'sme-connect'@0x21f0230
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'sme-connect'@0x21f0230 after 0.000025 second wait
wlp3s0: Automatic auth_alg selection: 0x1
wlp3s0: Overriding auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID 5c:49:79:ca:59:d8
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
wlp3s0: WPA: Selected mgmt group cipher 32
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp3s0: WPA: using GTK CCMP
wlp3s0: WPA: using PTK CCMP
wlp3s0: WPA: using KEY_MGMT WPA-PSK
wlp3s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x0
RRM: No RRM in network
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with 5c:49:79:ca:59:d8 (SSID='kaktus' freq=2412 MHz)
wlp3s0: State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
nl80211: Authenticate (ifindex=3)
  * bssid=5c:49:79:ca:59:d8
  * freq=2412
  * SSID - hexdump_ascii(len=6):
     6b 61 6b 74 75 73                                 kaktus         
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station 5c:49:79:ca:59:d8
EAPOL: disable timer tick
nl80211: Event message available
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp3s0(26:54:11:6d:44:53) A1=26:54:11:6d:44:53 A2=5c:49:79:ca:59:d8
nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 26 54 11 6d 44 53 5c 49 79 ca 59 d8 5c 49 79 ca 59 d8 00 10 00 00 02 00 00 00
nl80211: Authenticate event
wlp3s0: Event AUTH (11) received
wlp3s0: SME: Authentication response: peer=5c:49:79:ca:59:d8 auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=0): [NULL]
wlp3s0: Trying to associate with 5c:49:79:ca:59:d8 (SSID='kaktus' freq=2412 MHz)
wlp3s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=3)
  * bssid=5c:49:79:ca:59:d8
  * freq=2412
  * SSID - hexdump_ascii(len=6):
     6b 61 6b 74 75 73                                 kaktus         
  * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 01 00 00 40
  * WPA Versions 0x2
  * pairwise=0xfac04
  * group=0xfac04
  * akm=0xfac02
nl80211: Association request send successfully
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
nl80211: Delete station 5c:49:79:ca:59:d8
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station 5c:49:79:ca:59:d8
l2_packet_receive: src=5c:49:79:ca:59:d8 len=99
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 e6 b9 b7 fd c8 c5 4b 2f 17 b1 d9 7a e5 ca 6b cf 85 84 29 8d bf f2 3c 36 4c a7 53 a1 41 77 61 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=5c:49:79:ca:59:d8 len=99
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 02 59 0e c5 ad 1e 60 20 39 cd 8b 3b 51 c7 16 0e 46 d3 1f e1 08 94 7e bc 6d 99 1b 05 3d da f9 c3 c6 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=5c:49:79:ca:59:d8 len=99
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 03 59 0e c5 ad 1e 60 20 39 cd 8b 3b 51 c7 16 0e 46 d3 1f e1 08 94 7e bc 6d 99 1b 05 3d da f9 c3 c6 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=5c:49:79:ca:59:d8 len=99
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 04 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=5c:49:79:ca:59:d8 len=99
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 05 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Event message available
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp3s0
nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp3s0(26:54:11:6d:44:53) A1=26:54:11:6d:44:53 A2=5c:49:79:ca:59:d8
nl80211: MLME event frame - hexdump(len=150): 10 00 3a 01 26 54 11 6d 44 53 5c 49 79 ca 59 d8 5c 49 79 ca 59 d8 20 10 31 04 00 00 05 c0 01 08 82 84 8b 0c 12 96 18 24 32 04 30 48 60 6c 2d 1a ad 01 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 04 06 e6 47 0d 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a 0e 14 00 0a 00 2c 01 c8 00 14 00 05 00 19 00 7f 08 01 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
nl80211: Associate event
wlp3s0: Event ASSOC (0) received
wlp3s0: Association info event
resp_ies - hexdump(len=120): 01 08 82 84 8b 0c 12 96 18 24 32 04 30 48 60 6c 2d 1a ad 01 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 04 06 e6 47 0d 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a 0e 14 00 0a 00 2c 01 c8 00 14 00 05 00 19 00 7f 08 01 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
IEEE 802.11 element parse ignored unknown element (id=74 elen=14)
wlp3s0: freq=2412 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
wlp3s0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp3s0: Associated to a new BSS: BSSID=5c:49:79:ca:59:d8
wlp3s0: Associated with 5c:49:79:ca:59:d8
wlp3s0: WPA: Association event - clear replay counter
wlp3s0: WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: Cancelling scan request
wlp3s0: Process pending EAPOL frame that was received just before association notification
wlp3s0: RX EAPOL from 5c:49:79:ca:59:d8
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 05 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: Setting authentication timeout: 10 sec 0 usec
wlp3s0: IEEE 802.1X RX: version=2 type=3 length=95
WPA: RX EAPOL-Key - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 05 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0:   EAPOL-Key type=2
wlp3s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
wlp3s0:   key_length=16 key_data_length=0
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 05
  key_nonce - hexdump(len=32): 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp3s0: State: ASSOCIATED -> 4WAY_HANDSHAKE
wlp3s0: WPA: RX message 1 of 4-Way Handshake from 5c:49:79:ca:59:d8 (ver=2)
RSN: msg 1/4 key data - hexdump(len=0):
Get randomness: len=32 entropy=3
WPA: Renewed SNonce - hexdump(len=32): 4d f7 56 36 72 85 dc a2 dc b3 ed 0f a4 b9 94 cf 4a 9c f8 03 e2 62 6b ec a4 60 bf 1a 3f 3b 34 86
WPA: PTK derivation - A1=26:54:11:6d:44:53 A2=5c:49:79:ca:59:d8
WPA: Nonce1 - hexdump(len=32): 4d f7 56 36 72 85 dc a2 dc b3 ed 0f a4 b9 94 cf 4a 9c f8 03 e2 62 6b ec a4 60 bf 1a 3f 3b 34 86
WPA: Nonce2 - hexdump(len=32): 9a 27 89 28 6b 9d d3 18 1e 53 0d 25 d3 62 43 ee 38 36 9d 45 16 42 f1 a6 ec 10 ce 4d b5 48 1e a2
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: KEK - hexdump(len=16): [REMOVED]
WPA: TK - hexdump(len=16): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 05
wlp3s0: WPA: Sending EAPOL-Key 2/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 4f b6 38 78 e2 dc e2 16 db 25 c3 5d 8b 73 ff 93
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 05 4d f7 56 36 72 85 dc a2 dc b3 ed 0f a4 b9 94 cf 4a 9c f8 03 e2 62 6b ec a4 60 bf 1a 3f 3b 34 86 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4f b6 38 78 e2 dc e2 16 db 25 c3 5d 8b 73 ff 93 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
IEEE 802.11 element parse ignored unknown element (id=74 elen=14)
WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
WMM AC: U-APSD queues=0x0
WMM AC: Valid WMM association, WMM AC is enabled
wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
nl80211: Event message available
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp3s0
nl80211: Ignore connect event (cmd=46) when using userspace SME
nl80211: Event message available
nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp3s0
nl80211: Regulatory domain change
 * initiator=3
 * type=0
 * alpha2=DE
wlp3s0: Event CHANNEL_LIST_CHANGED (28) received
wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE
wlp3s0: Updating hw mode
nl80211: Regulatory information - country=DE (DFS-ETSI)
nl80211: 2400-2483 @ 40 MHz 20 mBm
nl80211: 5150-5250 @ 80 MHz 20 mBm (no outdoor)
nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
nl80211: 5470-5725 @ 160 MHz 26 mBm (DFS)
nl80211: 5725-5875 @ 80 MHz 13 mBm
nl80211: 57000-66000 @ 2160 MHz 40 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Event message available
nl80211: Drv Event 64 (NL80211_CMD_NOTIFY_CQM) received for wlp3s0
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
nl80211: Delete station 5c:49:79:ca:59:d8
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp3s0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp3s0(26:54:11:6d:44:53) A1=5c:49:79:ca:59:d8 A2=26:54:11:6d:44:53
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 5c 49 79 ca 59 d8 26 54 11 6d 44 53 5c 49 79 ca 59 d8 00 00 04 00
nl80211: Deauthenticate event
wlp3s0: Event DEAUTH (12) received
wlp3s0: Deauthentication notification
wlp3s0:  * reason 4 (locally generated)
wlp3s0:  * address 5c:49:79:ca:59:d8
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlp3s0: CTRL-EVENT-DISCONNECTED bssid=5c:49:79:ca:59:d8 reason=4 locally_generated=1
wlp3s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="kaktus" auth_failures=1 duration=10 reason=WRONG_KEY
wlp3s0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=7)
wlp3s0: Setting scan request: 0.100000 sec
wlp3s0: Radio work 'sme-connect'@0x21f0230 done in 4.534785 seconds
wlp3s0: radio_work_free('sme-connect'@0x21f0230: num_active_works --> 0
Added BSSID 5c:49:79:ca:59:d8 into blacklist
wlp3s0: Blacklist count 1 --> request scan in 100 ms
wlp3s0: Ignore new scan request for 0.100000 sec since an earlier request is scheduled to trigger sooner
wlp3s0: WPA: Clear old PMK and PTK
wlp3s0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
nl80211: Failed to open /proc/sys/net/ipv4/conf/wlp3s0/drop_unicast_in_l2_multicast: No such file or directory
nl80211: Failed to set IPv4 unicast in multicast filter
wlp3s0: State: 4WAY_HANDSHAKE -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WMM AC: WMM AC is disabled
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlp3s0: BSS: Remove id 0 BSSID 5c:49:79:ca:59:d8 SSID 'kaktus' due to Connection to AP lost
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp3s0
nl80211: Ignore disconnect event when using userspace SME
nl80211: Event message available
nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp3s0
nl80211: Regulatory domain change
 * initiator=0
 * type=1
wlp3s0: Event CHANNEL_LIST_CHANGED (28) received
wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
wlp3s0: Updating hw mode
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x21d2c50
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x21d2c50 after 0.000019 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000365 seconds
EAPOL: startWhen --> 0
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 0.801667 seconds
nl80211: Received scan results (2 BSSes)
wlp3s0: BSS: Start scan result update 2
wlp3s0: BSS: Add new id 2 BSSID 5c:49:79:ca:59:d8 SSID 'kaktus' freq 2412
BSS: last_scan_res_used=2/32
wlp3s0: New scan results available (own=1 ext=0)
wlp3s0: Radio work 'scan'@0x21d2c50 done in 0.817908 seconds
wlp3s0: radio_work_free('scan'@0x21d2c50: num_active_works --> 0
wlp3s0: Postpone network selection by 9 seconds since all networks are disabled
wlp3s0: Try to associate due to network getting re-enabled
Fast associate: Old scan results
wlp3s0: Setting scan request: 0.000000 sec
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x21f0760
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x21f0760 after 0.000009 second wait
wlp3s0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000057 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 0.820086 seconds
nl80211: Received scan results (2 BSSes)
wlp3s0: BSS: Start scan result update 3
BSS: last_scan_res_used=2/32
wlp3s0: New scan results available (own=1 ext=0)
wlp3s0: Radio work 'scan'@0x21f0760 done in 0.834438 seconds
wlp3s0: radio_work_free('scan'@0x21f0760: num_active_works --> 0
wlp3s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="kaktus"
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: 5c:49:79:ca:59:d8 ssid='kaktus' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-58 freq=2412  wps
wlp3s0:    skip - blacklisted (count=1 limit=0)
wlp3s0: 1: 08:96:d7:fa:27:0f ssid='FRITZ!Powerline 540E' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 freq=2462  wps
wlp3s0:    skip - SSID mismatch
wlp3s0: No APs found - clear blacklist and try again
Removed BSSID 5c:49:79:ca:59:d8 from blacklist (clear)
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: 5c:49:79:ca:59:d8 ssid='kaktus' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-58 freq=2412  wps
wlp3s0:    selected based on RSN IE
wlp3s0:    selected BSS 5c:49:79:ca:59:d8 ssid='kaktus'
wlp3s0: Considering connect request: reassociate: 0  selected: 5c:49:79:ca:59:d8  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x21d17d0  current_ssid=(nil)
wlp3s0: Request association with 5c:49:79:ca:59:d8
wlp3s0: Re-association to the same ESS
wlp3s0: Add radio work 'sme-connect'@0x21f0760
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'sme-connect'@0x21f0760 after 0.000026 second wait
wlp3s0: Automatic auth_alg selection: 0x1
wlp3s0: Overriding auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID 5c:49:79:ca:59:d8
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
wlp3s0: WPA: Selected mgmt group cipher 32
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp3s0: WPA: using GTK CCMP
wlp3s0: WPA: using PTK CCMP
wlp3s0: WPA: using KEY_MGMT WPA-PSK
wlp3s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x0
RRM: No RRM in network
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with 5c:49:79:ca:59:d8 (SSID='kaktus' freq=2412 MHz)
wlp3s0: State: SCANNING -> AUTHENTICATING
Back to top
View user's profile Send private message
charles17
Advocate
Advocate


Joined: 02 Mar 2008
Posts: 2659

PostPosted: Mon Oct 10, 2016 4:51 pm    Post subject: Reply with quote

Sorry for not being more helpful. Maybe the following link could lead to better results: https://forum.pfsense.org/index.php?topic=81985.0

Edit:
Are you having some wext in /etc/conf.d/net configurations? Then remove it, see https://wiki.gentoo.org/wiki/Wpa_supplicant#Setup_for_Gentoo_net..2A_scripts
Back to top
View user's profile Send private message
linuxale
n00b
n00b


Joined: 11 Jan 2006
Posts: 34

PostPosted: Fri Nov 04, 2016 3:47 pm    Post subject: Reply with quote

Hi guys,
I had a similar problem with a different driver ( cfg80211 ).
Come out that the problem was the latest wpa_supplicant version I installed (2.6 ) together with a wrong config PEM certificate configured.
So make it working I had to downgrade to wpa_supplicant-2.5-r2 and remove the wrong cert configured.

After that mine connection worked perfectly.

Cheers
Alessandro
Back to top
View user's profile Send private message
nickel
Apprentice
Apprentice


Joined: 21 Oct 2005
Posts: 189
Location: Germany

PostPosted: Tue Nov 15, 2016 1:32 pm    Post subject: Reply with quote

linuxale wrote:
Hi guys,
I had a similar problem with a different driver ( cfg80211 ).
Come out that the problem was the latest wpa_supplicant version I installed (2.6 ) together with a wrong config PEM certificate configured.
So make it working I had to downgrade to wpa_supplicant-2.5-r2 and remove the wrong cert configured.

After that mine connection worked perfectly.

Cheers
Alessandro


Hi Alessandro,
i have the same problem. Only i'm using the infamous Broadcom 43227.
I've downgraded wpa_supplicant, like you said, but still the same error.
Could you pls explain, what else did you do?
Thx in advance
Oswaldo
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum