Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] problem connect to wifi
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
ttre
n00b
n00b


Joined: 04 Aug 2016
Posts: 29

PostPosted: Thu Aug 04, 2016 7:35 pm    Post subject: [SOLVED] problem connect to wifi Reply with quote

I want to connect to internet by wifi.

I have:
wlp2s0b1 Broadcom BCM4313 802.11b/g/n Wireless LAN

I did
ifconfig wlp2s0b1 up
and after
iwlist wlp2s0b1 scan
I see list of aps. I think it is ok.

hwinfo
Code:

cpu:
                       Intel(R) Atom(TM) CPU N450   @ 1.66GHz, 1662 MHz
                       Intel(R) Atom(TM) CPU N450   @ 1.66GHz, 1662 MHz
keyboard:
  /dev/input/event4    AT Translated Set 2 keyboard
mouse:
  /dev/input/mice      ETPS/2 Elantech Touchpad
graphics card:
                       Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
                       Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
sound:
                       Intel NM10/ICH7 Family High Definition Audio Controller
storage:
                       Intel NM10/ICH7 Family SATA Controller [AHCI mode]
network:
  wlp2s0b1             Broadcom BCM4313 802.11b/g/n Wireless LAN Controller
network interface:
  lo                   Loopback network interface
  wlp2s0b1             Ethernet network interface
disk:
  /dev/sda             WDC WD1600BEVT-2
  /dev/sdb             Patriot Memory
  /dev/ram0            Disk
  /dev/ram1            Disk
  /dev/ram2            Disk
  /dev/ram3            Disk
  /dev/ram4            Disk
  /dev/ram5            Disk
  /dev/ram6            Disk
  /dev/ram7            Disk
  /dev/ram8            Disk
  /dev/ram9            Disk
  /dev/ram10           Disk
  /dev/ram11           Disk
  /dev/ram12           Disk
  /dev/ram13           Disk
  /dev/ram14           Disk
  /dev/ram15           Disk
partition:
  /dev/sda1            Partition
  /dev/sda2            Partition
  /dev/sda3            Partition
  /dev/sda4            Partition
  /dev/sdb1            Partition
usb controller:
                       Intel NM10/ICH7 Family USB UHCI Controller #1
                       Intel NM10/ICH7 Family USB UHCI Controller #2
                       Intel NM10/ICH7 Family USB UHCI Controller #3
                       Intel NM10/ICH7 Family USB UHCI Controller #4
                       Intel NM10/ICH7 Family USB2 EHCI Controller
bios:
                       BIOS
bridge:
                       Intel Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
                       Intel NM10/ICH7 Family PCI Express Port 1
                       Intel NM10/ICH7 Family PCI Express Port 2
                       Intel 82801 Mobile PCI Bridge
                       Intel NM10 Family LPC Controller
hub:
                       Linux 4.4.6-gentoo uhci_hcd UHCI Host Controller
                       Linux 4.4.6-gentoo uhci_hcd UHCI Host Controller
                       Linux 4.4.6-gentoo uhci_hcd UHCI Host Controller
                       Linux 4.4.6-gentoo ehci_hcd EHCI Host Controller
                       Linux 4.4.6-gentoo uhci_hcd UHCI Host Controller
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Keyboard controller
                       Intel NM10/ICH7 Family SMBus Controller
  /dev/input/event7    Chicony Electronics 1.3M WebCam


I am trying use connman but I get:
Code:

connmanctl
Error getting services: The name net.connman was not provided by any .service filesError getting peers

What does mean this error ?


Last edited by ttre on Fri Aug 12, 2016 8:31 am; edited 1 time in total
Back to top
View user's profile Send private message
JeroenMathon
n00b
n00b


Joined: 11 Aug 2016
Posts: 17
Location: /usr/portage/sys-kernel/JeroenMathon

PostPosted: Thu Aug 11, 2016 10:34 am    Post subject: Reply with quote

Hey,

Have you installed the NetworkManager package?

Can you install eix and run
Code:
eix networkmanager
and send the output for me?
Back to top
View user's profile Send private message
ttre
n00b
n00b


Joined: 04 Aug 2016
Posts: 29

PostPosted: Thu Aug 11, 2016 1:28 pm    Post subject: Reply with quote

Code:
eix networkmanager
* kde-frameworks/networkmanager-qt
     Available versions:  (5) 5.23.0(5/5.23) ~5.24.0(5/5.24)
       {debug teamd test}
     Homepage:            https://www.kde.org/
     Description:         NetworkManager bindings for Qt

* net-misc/networkmanager
     Available versions:  1.0.12-r1 ~1.2.4 {bluetooth connection-sharing consolekit +dhclient dhcpcd gnutls +introspection +modemmanager ncurses +nss +ppp resolvconf selinux systemd teamd test vala +wext +wifi zeroconf ABI_MIPS="n32 n64 o32" ABI_PPC="32 64" ABI_S390="32 64" ABI_X86="32 64 x32" KERNEL="linux"}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         A set of co-operative tools that make networking simple and straightforward

* net-misc/networkmanager-openconnect
     Available versions:  1.0.8-r1 ~1.2.2 {gtk}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         NetworkManager OpenConnect plugin

* net-misc/networkmanager-openswan
     Available versions:  1.0.6 1.0.8 {gtk}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         NetworkManager Openswan plugin

* net-misc/networkmanager-openvpn
     Available versions:  1.0.8 ~1.2.2 {gtk test}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         NetworkManager OpenVPN plugin

* net-misc/networkmanager-pptp
     Available versions:  1.0.8 ~1.2.2 {gtk}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         NetworkManager PPTP plugin

* net-misc/networkmanager-sstp
     Available versions:  ~0.9.8 {gtk}
     Homepage:            https://sourceforge.net/projects/sstp-client/
     Description:         Client for the proprietary Microsoft Secure Socket Tunneling Protocol(SSTP)

* net-misc/networkmanager-vpnc
     Available versions:  1.0.8 ~1.2.2 {gtk test}
     Homepage:            https://wiki.gnome.org/Projects/NetworkManager
     Description:         NetworkManager VPNC plugin

* sec-policy/selinux-networkmanager
     Available versions:  2.20141203-r10 2.20151208-r1 2.20151208-r2 ~2.20151208-r3 ~2.20151208-r4 **9999
     Homepage:            https://wiki.gentoo.org/wiki/Project:SELinux
     Description:         SELinux policy for networkmanager
Back to top
View user's profile Send private message
JeroenMathon
n00b
n00b


Joined: 11 Aug 2016
Posts: 17
Location: /usr/portage/sys-kernel/JeroenMathon

PostPosted: Thu Aug 11, 2016 1:41 pm    Post subject: Reply with quote

It seems that you have not installed the networkmanager package.
Can you run
Code:
emerge --ask networkmanager
and tell me if it works after that?
Back to top
View user's profile Send private message
ttre
n00b
n00b


Joined: 04 Aug 2016
Posts: 29

PostPosted: Thu Aug 11, 2016 8:02 pm    Post subject: Reply with quote

Finally I installed wicd and works ok.
There is only my connection now. I don't want to stop it.
I don't know if network manager can have influence for it and mess it up.
Back to top
View user's profile Send private message
JeroenMathon
n00b
n00b


Joined: 11 Aug 2016
Posts: 17
Location: /usr/portage/sys-kernel/JeroenMathon

PostPosted: Fri Aug 12, 2016 5:45 am    Post subject: Reply with quote

ttre wrote:
Finally I installed wicd and works ok.
There is only my connection now. I don't want to stop it.
I don't know if network manager can have influence for it and mess it up.


Both will definitely interfere.

So make sure you disable the networkmanager service, dhcpcd service and enable the wicd service.

Let me know if it works, if so mark this topic as solved :)
Back to top
View user's profile Send private message
ttre
n00b
n00b


Joined: 04 Aug 2016
Posts: 29

PostPosted: Fri Aug 12, 2016 8:32 am    Post subject: Reply with quote

It works.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum