View previous topic :: View next topic |
Author |
Message |
iovem n00b
Joined: 06 Jun 2016 Posts: 6
|
Posted: Thu Jun 09, 2016 4:20 pm Post subject: ath9k does not work |
|
|
Good day, module ath9k doesn not ping my network anymore after update some net software,
but ath9k can connect and ping network if you very near to the router http://www.calculate-linux.ru/attachments/4439/Screenshot_20160525_101003.png
uname -a
Code: | Linux mal 4.4.9-calculate #1 SMP PREEMPT Thu May 5 13:29:10 UTC 2016 x86_64 AMD Athlon(tm) X2 Dual-Core QL-65 AuthenticAMD GNU/Linux |
lspci
Code: | 03:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01) |
grep -i ATH9K /usr/src/linux/.config
Code: | CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_DYNACK=y
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set |
ifconfig
Code: | wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.112 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::225:d3ff:fe3f:411d prefixlen 64 scopeid 0x20<link>
ether 00:25:d3:3f:41:1d txqueuelen 1000 (Ethernet)
RX packets 5 bytes 1036 (1.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13 bytes 1946 (1.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
lsmod
Code: | ath9k 95946 0
ath9k_common 21875 1 ath9k
ath9k_hw 404226 2 ath9k_common,ath9k
ath 18299 3 ath9k_common,ath9k,ath9k_hw |
ping www.calculate-linux.ru 1 meter
Code: | PING www.calculate-linux.ru (80.246.243.18) 56(84) bytes of data.
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=1 ttl=56 time=21.7 ms
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=2 ttl=56 time=13.3 ms
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=3 ttl=56 time=14.9 ms
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=4 ttl=56 time=12.6 ms
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=5 ttl=56 time=14.2 ms
64 bytes from local.calculate.ru (80.246.243.18): icmp_seq=6 ttl=56 time=13.1 ms
^C
--- www.calculate-linux.ru ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5007ms
rtt min/avg/max/mdev = 12.686/15.026/21.796/3.120 ms |
ping www.calculate-linux.ru 2 meters
|
|
Back to top |
|
|
khayyam Watchman
Joined: 07 Jun 2012 Posts: 6227 Location: Room 101
|
Posted: Thu Jun 09, 2016 7:05 pm Post subject: |
|
|
iovem ...
this forum is for gentoo linux ... you should ask on the calculate linux forums.
best ... khay |
|
Back to top |
|
|
iovem n00b
Joined: 06 Jun 2016 Posts: 6
|
Posted: Sat Jun 11, 2016 8:12 pm Post subject: |
|
|
khayyam wrote: | iovem ...
this forum is for gentoo linux ... you should ask on the calculate linux forums.
best ... khay |
Thanks, but they do not know what is that.
1. But may be that problem is so close with ath9k firmware.
2. And because linux calculate based on gentoo.
3. I asked this community for help. |
|
Back to top |
|
|
khayyam Watchman
Joined: 07 Jun 2012 Posts: 6227 Location: Room 101
|
Posted: Sat Jun 11, 2016 10:19 pm Post subject: |
|
|
iovem wrote: |
Thanks, but they do not know what is that. |
ioevm ... it is not that they do not know, its that no one is active within their community, look at the post dates (and so level of activity) on their forum.
iovem wrote: | 1. But may be that problem is so close with ath9k firmware. |
So ... every distribution is using ath9k.
iovem wrote: | 2. And because linux calculate based on gentoo. |
Calculate get that code at no cost, they don't get the community required to support that code, that they have to create for themselves.
iovem wrote: | 3. I asked this community for help. |
So, you could ask in a general linux support forum, as I said, we don't support calculate linux.
best ... khay |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54119 Location: 56N 3W
|
Posted: Sat Jun 11, 2016 10:47 pm Post subject: |
|
|
Moved from Networking & Security to Unsupported Software.
So that Gentoo users are not mislead. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
iovem n00b
Joined: 06 Jun 2016 Posts: 6
|
Posted: Sun Jun 12, 2016 8:02 am Post subject: |
|
|
Ok, no problem.
I forgot to say the real thing.
I tried to run Hybrid ISO and i saw the same problem.
No, not the same problem, i saw what ath9k can not connect to network: totally. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54119 Location: 56N 3W
|
Posted: Sun Jun 12, 2016 9:21 am Post subject: |
|
|
iovem,
Some error messages produced when you use the Hybrid ISO would be useful.
Also describe how you configured wpa_supplicant when using the Hybrid ISO. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
|