KintaroBC
n00b
Joined: 15 Feb 2014
Posts: 63
Location: Australia
|
 Posted: Sun May 29, 2016 8:11 pm Post subject: Getting net-misc/sks to listen for connections |
 |
|
I've installed net-misc/sks but I am having issues with not being about to find an OpenRC init script which launches the listening processes. I've tried to adapt the guide I was using as much to Gentoo as I could. A major difference between the guide for current Gentoo and Ubuntu LTS is that the former has /etc/init.d/sks-db and /etc/init.d/sks-recon but not /etc/init.d/sks which is what Ubuntu has which starts the SKS DB thread and the SKS recon thread.
Here is my /var/lib/sks/sksconf file:
| Code: |
#************************************************************************#
#* sksconf.typical - Typical configuration settings for a SKS server *#
#* *#
#* Copyright (C) 2011, 2012, 2013 John Clizbe *#
#* *#
#* This file is part of SKS. SKS is free software; you can *#
#* redistribute it and/or modify it under the terms of the GNU General *#
#* Public License as published by the Free Software Foundation; either *#
#* version 2 of the License, or (at your option) any later version. *#
#* *#
#* This program is distributed in the hope that it will be useful, but *#
#* WITHOUT ANY WARRANTY; without even the implied warranty of *#
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *#
#* General Public License for more details. *#
#* *#
#* You should have received a copy of the GNU General Public License *#
#* along with this program; if not, write to the Free Software *#
#* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *#
#* USA or see <http://www.gnu.org/licenses/>. *#
#************************************************************************#
# sksconf -- SKS main configuration
#
basedir: /var/sks
# debuglevel 3 is default (max. debuglevel is 10)
debuglevel: 3
hostname: keyserver.secusrvr.com
hkp_port: 11371
recon_port: 11370
#
server_contact: 0xDECAFBADDEADBEEF
from_addr: pgp-public-keys@secusrvr.com
sendmail_cmd: /usr/sbin/sendmail -t -oi
#
initial_stat:
membership_reload_interval: 1
stat_hour: 17
#
# set DB file pagesize as recommended by db_tuner
# pagesize is (n * 512) bytes
# NOTE: These must be set _BEFORE_ [fast]build & pbuild and remain set
# for the life of the database files. To change a value requires recreating
# the database from a dump
#
# KDB/key 65536
pagesize: 128
#
# KDB/keyid 32768
keyid_pagesize 64
#
# KDB/meta 512
meta_pagesize: 1
# KDB/subkeyid 65536
subkeyid_pagesize: 128
#
# KDB/time 65536
time_pagesize: 128
#
# KDB/tqueue 512
tqueue_pagesize: 1
#
# KDB/word - db_tuner suggests 512 bytes. This locked the build process
# Better to use a default of 8 (4096 bytes) for now
#word_pagesize: 8
#
# PTree/ptree 4096
ptree_pagesize: 8
|
It is pretty basic, but sks is not listening on any ports despite having sks-db and sks-recon running. A port is configured, and this problem at least appears to require some modification of the init script.
Edit: When I checked the status of the sks-db process just now it says it has crashed. So I have found the problem...
| Code: |
# service sks-db status
* status: crashed
|
Edit: I increased the logging level in sksconf however I cannot seem to find the debug output. |
|
Unsupported Software
