WodkaBylaZaSlona n00b
Joined: 08 Mar 2016 Posts: 10
|
Posted: Thu May 26, 2016 11:55 am Post subject: QCA6174 connection issues |
|
|
Hi,
Does anyone handle to get QCA6174 working with Gentoo? I'm trying to use firmware prepared for Archlinux:
https://github.com/str0g/QCA6174
And however it loads more or less properly:
Code: |
[ 447.591428] ath10k_pci 0000:07:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 447.826150] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2
[ 447.826541] ath10k_pci 0000:07:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 11ad:0807
[ 447.826547] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 447.827893] ath10k_pci 0000:07:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 447.889988] ath10k_pci 0000:07:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0807 from ath10k/QCA6174/hw3.0/board-2.bin
[ 447.889997] ath10k_pci 0000:07:00.0: board_file api 1 bmi_id N/A crc32 872f3cc5
[ 450.008198] ath10k_pci 0000:07:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 450.077237] ath: EEPROM regdomain: 0x6c
[ 450.077240] ath: EEPROM indicates we should expect a direct regpair map
[ 450.077243] ath: Country alpha2 being used: 00
[ 450.077245] ath: Regpair used: 0x6c
[ 450.078664] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0 |
It does not work. It disconnects from any AP with:
Code: | [ 439.524343] wlp7s0: deauthenticating from 62:02:71:43:d2:3e by local choice (Reason: 3=DEAUTH_LEAVING) |
Any ideas what could be wrong? |
|