View previous topic :: View next topic |
Author |
Message |
danomac l33t
Joined: 06 Nov 2004 Posts: 881 Location: Vancouver, BC
|
Posted: Sun Apr 10, 2016 4:01 pm Post subject: Samba 4 compile fails |
|
|
I think I'm just going to mask samba > 4 for now, unless someone can figure out why these files are missing:
Code: |
[ 107/2665] Compiling lib/replace/replace.c
[ 108/2665] Compiling lib/replace/cwrap.c
Waf: Leaving directory `/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9-abi_x86_64.amd64/bin'
Build failed:
[Errno 2] No such file or directory: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9-abi_x86_64.amd64/bin/default/lib/replace/cwrap_2.d'
[Errno 2] No such file or directory: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9-abi_x86_64.amd64/bin/default/lib/replace/replace_2.d'
Makefile:8: recipe for target 'all' failed
make: *** [all] Error 1
* ERROR: net-fs/samba-4.2.9::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-fs/samba-4.2.9::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-fs/samba-4.2.9::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-fs/samba-4.2.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-fs/samba-4.2.9/temp/environment'.
* Working directory: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9-abi_x86_64.amd64'
* S: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9'
>>> Failed to emerge net-fs/samba-4.2.9, Log file:
>>> '/var/tmp/portage/net-fs/samba-4.2.9/temp/build.log'
* Messages for package net-fs/samba-4.2.9:
* ERROR: net-fs/samba-4.2.9::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-fs/samba-4.2.9::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-fs/samba-4.2.9::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-fs/samba-4.2.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-fs/samba-4.2.9/temp/environment'.
* Working directory: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9-abi_x86_64.amd64'
* S: '/var/tmp/portage/net-fs/samba-4.2.9/work/samba-4.2.9'
|
I was looking through use flags but found nothing obvious. Does anyone else have this issue?
This is what it's trying to build:
Code: |
[ebuild U ] net-fs/samba-4.2.9::gentoo [3.6.25::gentoo] USE="acl client cups fam pam system-mitkrb5%* -addc% -addns -ads -aio* -avahi -cluster -dmapi -gnutls% -iprint% -ldap -quota (-selinux) -syslog -systemd% {-test%} -winbind* (-caps%) (-debug%) (-doc%) (-examples%) (-ldb%) (-netapi%*) (-readline%*) (-server%*) (-smbclient%*) (-smbsharemodes%) (-swat%)" ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python2_7%*" 0 KiB
|
|
|
Back to top |
|
|
Pegasus87 Guru
Joined: 09 Sep 2004 Posts: 373
|
Posted: Thu May 05, 2016 12:09 pm Post subject: |
|
|
I'm also trying to install samba-4.2.11 and I'm getting an error in the compile phase:
Code: |
...
...
[2574/2660] Generating manpages/nmbd.8
[2575/2660] Generating manpages/nmblookup.1
Note: Writing nmblookup.1
Note: Writing nmbd.8
Note: Writing net.8
Waf: Leaving directory `/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11-abi_x86_32.x86/bin'
Build failed: -> task failed (err #-7):
{task: manpages/smb.conf.5 smb.conf.5.xml,parameters.all.xml -> smb.conf.5}
Makefile:8: recipe for target 'all' failed
make: *** [all] Error 1
* ERROR: net-fs/samba-4.2.11::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-fs/samba-4.2.11::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-fs/samba-4.2.11::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/environment'.
* Working directory: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11-abi_x86_32.x86'
* S: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11'
>>> Failed to emerge net-fs/samba-4.2.11, Log file:
>>> '/var/tmp/portage/net-fs/samba-4.2.11/temp/build.log'
* Messages for package net-fs/samba-4.2.11:
* ERROR: net-fs/samba-4.2.11::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-fs/samba-4.2.11::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-fs/samba-4.2.11::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/environment'.
* Working directory: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11-abi_x86_32.x86'
* S: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11'
|
The problem appears quite before the end of compilation ([2575/2660])... I Can't figure out, what the problem is. Any suggestions? |
|
Back to top |
|
|
Angrychile Apprentice
Joined: 27 Oct 2009 Posts: 235
|
Posted: Thu May 19, 2016 7:39 pm Post subject: |
|
|
Jesus Christ bump this shit. _________________ hola |
|
Back to top |
|
|
Angrychile Apprentice
Joined: 27 Oct 2009 Posts: 235
|
Posted: Thu May 19, 2016 7:48 pm Post subject: |
|
|
Okay, in case anyone still gives a shit, I just tried building talloc with MAKEOPTS="-j1" and it builds now. I should note a I have a distcc setup, so that might also hurt it. -j1 turns off distcc for sure.
talloc is part of samba, and although I'm not building samba, talloc's compilation complains about the same missing file. May be someone should patch it to be -j1 by default?
try it with samba to see if it works. _________________ hola |
|
Back to top |
|
|
robertjsharp n00b
Joined: 30 Dec 2006 Posts: 20
|
Posted: Fri May 27, 2016 7:49 am Post subject: |
|
|
I had the same problem with 4.2.11 so I disabled distcc in FEATURES and it emerged without any problems. Must remember to restore FEATURES. |
|
Back to top |
|
|
keet Guru
Joined: 09 Sep 2008 Posts: 568
|
Posted: Fri May 27, 2016 11:37 pm Post subject: |
|
|
Something like this:
Code: | cat /etc/portage/env/nodistcc.conf
FEATURES="-distcc -distcc-pump"
MAKEOPTS="-j7 -l4" |
Code: | cat /etc/portage/package.env
...
net-fs/samba nodistcc.conf
sys-libs/talloc nodistcc.conf
... |
|
|
Back to top |
|
|
mhanft n00b
Joined: 31 Oct 2011 Posts: 11 Location: Nürnberg
|
Posted: Sun Aug 28, 2016 11:33 am Post subject: |
|
|
Doesn't help here.
I have found some other discussions which say "it's a fault of libxslt", "de-install docbook before installing samba", "here is a patch for docbook-xsl" and similar more. But with Gentoo, there is no "docbook" or "docbook-xsl" package (only "docbook-xsl-stylesheets" or something like that), and/or I have no idea how to apply an own patch to a package which I just "emerge" anyway.
Any more ideas how to upgrade to Samba 4?
Thanks,
-Matt |
|
Back to top |
|
|
liryon n00b
Joined: 21 Aug 2003 Posts: 21 Location: Boston, MA
|
Posted: Sat Sep 17, 2016 5:25 pm Post subject: |
|
|
the makeopts fix didn't work for me, I had to go in and disable distcc like robertjsharp did. |
|
Back to top |
|
|
mhanft n00b
Joined: 31 Oct 2011 Posts: 11 Location: Nürnberg
|
Posted: Sat Sep 17, 2016 5:50 pm Post subject: |
|
|
I did exactly what 'keet' had proposed two postings above (nodistcc.conf, package.env...) - didn't help.
I successfully compiled Samba 4 on a 64-bit Gentoo, but it doesn't work on 32-bit. Could it be a 'bitness' problem?
-Matt |
|
Back to top |
|
|
DTL n00b
Joined: 23 Oct 2015 Posts: 8
|
Posted: Wed Oct 26, 2016 8:27 pm Post subject: |
|
|
I have very similar problem as Pegasus87:
Code: |
[2549/2656] Parse::Pidl::Wireshark::Conformance.3pm: pidl/lib/Parse/Pidl/Wireshark/Conformance.pm -> bin/default/pidl/Parse::Pidl::Wireshark::Conformance.3pm
[2550/2656] Parse::Pidl::Util.3pm: pidl/lib/Parse/Pidl/Util.pm -> bin/default/pidl/Parse::Pidl::Util.3pm
[2551/2656] Parse::Pidl::NDR.3pm: pidl/lib/Parse/Pidl/NDR.pm -> bin/default/pidl/Parse::Pidl::NDR.3pm
[2552/2656] Parse::Pidl::Wireshark::NDR.3pm: pidl/lib/Parse/Pidl/Wireshark/NDR.pm -> bin/default/pidl/Parse::Pidl::Wireshark::NDR.3pm
[2553/2656] Generating manpages/smb.conf.5
[2554/2656] Generating manpages/dbwrap_tool.1
Note: Writing dbwrap_tool.1
[2555/2656] Generating manpages/eventlogadm.8
Note: Writing eventlogadm.8
[2556/2656] Generating manpages/findsmb.1
Note: Writing findsmb.1
[2557/2656] Generating manpages/libsmbclient.7
Note: Writing libsmbclient.7
[2558/2656] Generating manpages/lmhosts.5
Note: Writing lmhosts.5
[2559/2656] Generating manpages/log2pcap.1
Note: Writing log2pcap.1
Waf: Leaving directory `/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11-.arm/bin'
Build failed: -> task failed (err #-7):
{task: manpages/smb.conf.5 smb.conf.5.xml,parameters.all.xml -> smb.conf.5}
Makefile:8: recipe for target 'all' failed
make: *** [all] Error 1
* ERROR: net-fs/samba-4.2.11::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-fs/samba-4.2.11::gentoo'`,
* the complete build log and the output of `emerge -pqv '=net-fs/samba-4.2.11::gentoo'`.
* The complete build log is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-fs/samba-4.2.11/temp/environment'.
* Working directory: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11-.arm'
* S: '/var/tmp/portage/net-fs/samba-4.2.11/work/samba-4.2.11'
>>> Failed to emerge net-fs/samba-4.2.11, Log file:
>>> '/var/tmp/portage/net-fs/samba-4.2.11/temp/build.log'
|
This is on my small arm home server and I had samba working correctly before. I tried to switch openssh -> libressl and because of this I had to remove few packages. The switch failed, I reverted all the changes and I reinstalled everything back without any problems, just samba can't build.
So far I've tried to rebuild it multiple times, restarted, did all possible maintenance to portage (no problems found), tried with MAKEOPTS="-j1", but it still fails. I don't have distcc. It fails on exacly the same place every time. I also tried to install 4.2.14 but it failed on exactly the same step.
Code: |
# emerge --info '=net-fs/samba-4.2.11::gentoo' [4/47994]
Portage 2.3.0 (python 2.7.10-final-0, hardened/linux/arm/armv7a, gcc-4.9.4, glibc-2.22-r4, 3.4.103 armv7l)
=================================================================
System Settings
=================================================================
System uname: Linux-3.4.103-armv7l-ARMv7_Processor_rev_4_-v7l-with-gentoo-2.2
KiB Mem: 895380 total, 172772 free
KiB Swap: 2047996 total, 2045192 free
Timestamp of repository gentoo: Wed, 26 Oct 2016 03:00:01 +0000
sh bash 4.3_p48
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash: 4.3_p48::gentoo
dev-lang/perl: 5.22.2::gentoo
dev-lang/python: 2.7.10-r1::gentoo, 3.4.3-r1::gentoo
dev-util/cmake: 3.5.2-r1::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.2::gentoo
sys-apps/openrc: 0.21.7::gentoo
sys-apps/sandbox: 2.10-r1::gentoo
sys-devel/autoconf: 2.69::gentoo
sys-devel/automake: 1.14.1::gentoo, 1.15::gentoo
sys-devel/binutils: 2.25.1-r1::gentoo
sys-devel/gcc: 4.9.4::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6::gentoo
sys-devel/make: 4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc: 2.22-r4::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
ACCEPT_KEYWORDS="arm"
ACCEPT_LICENSE="* -@EULA"
CBUILD="armv7a-hardfloat-linux-gnueabi"
CFLAGS="-O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
CHOST="armv7a-hardfloat-linux-gnueabi"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe -march=armv7-a"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphan
s userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe -march=armv7-a"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exc
lude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="acl arm armv5te armv6 armv6t2 berkdb bindist bzip2 cli cracklib crypt cxx dri gdbm hardened iconv ipv6 modules ncurses nls nptl openmp pam pax_kernel pcre pic pie readline seccomp session ssl ssp tcpd unicode urandom xattr x
tpax zlib" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user au
toindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id user
dir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS
="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse e
vdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTH
ON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby20 ruby21" USERLAND="GNU" VIDEO_CARDS="exynos fbdev omap omapfb dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2
p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
|
Code: |
# emerge -pqv '=net-fs/samba-4.2.11::gentoo'
[ebuild N ] net-fs/samba-4.2.11 USE="acl pam system-mitkrb5 -addc -addns -ads -aio -avahi -client -cluster -cups -dmapi -fam -gnutls -iprint -ldap -quota (-selinux) -syslog -systemd {-test} -winbind" PYTHON_TARGETS="python2_7"
|
I just want to point out that it was working :/. This is quite slow cpu and it takes 2h to get to the point where it fails and this is the worst I think
Any ideas are welcome. My last idea would be 'emerge -e @world' and/or @system, but with this CPU it will take 2-3 days. |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9679 Location: almost Mile High in the USA
|
Posted: Mon Mar 27, 2017 5:56 am Post subject: |
|
|
Wow, almost 1 year after the initial report I ran into the same samba issue as the OP. Disabling distcc got past the error.
This other error in this thread seems to be something different...that docbook suggestion does sound plausible though I haven't studied the code, perhaps re-emerging docbook stuff is an easy test in the meantime. _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
CaptainBlood Advocate
Joined: 24 Jan 2010 Posts: 3624
|
Posted: Mon Mar 27, 2017 6:59 pm Post subject: |
|
|
Builds fine here Code: | emerge --info samba
Portage 2.3.3 (python 2.7.12-final-0, default/linux/amd64/13.0, gcc-5.4.0, glibc-2.23-r3, 4.9.16-gentoo-krnlschd x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-4.9.16-gentoo-krnlschd-x86_64-Intel-R-_Core-TM-_i3-3217U_CPU_@_1.80GHz-with-gentoo-2.3
KiB Mem: 8051232 total, 3481324 free
KiB Swap: 8048528 total, 8048528 free
Timestamp of repository gentoo: Mon, 27 Mar 2017 18:15:01 +0000
sh bash 4.3_p48-r1
ld GNU ld (Gentoo 2.27 p1.0) 2.27
distcc[14505] (dcc_trace_version) distcc 3.2rc1 x86_64-pc-linux-gnu; built Dec 23 2016 17:08:13 [disabled]
ccache version 3.2.4 [disabled]
app-shells/bash: 4.3_p48-r1::gentoo
dev-java/java-config: 2.2.0-r3::gentoo
dev-lang/perl: 5.22.3_rc4::gentoo
dev-lang/python: 2.7.12::gentoo, 3.4.5::gentoo, 3.5.3::gentoo, 3.6.0::gentoo
dev-util/ccache: 3.2.4::gentoo
dev-util/cmake: 3.7.2::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.3::gentoo
sys-apps/openrc: 0.23.2::gentoo
sys-apps/sandbox: 2.10-r3::gentoo
sys-devel/autoconf: 2.13::gentoo, 2.69::gentoo
sys-devel/automake: 1.11.6-r1::gentoo, 1.12.6::gentoo, 1.15::gentoo
sys-devel/binutils: 2.25.1-r1::gentoo, 2.26.1::gentoo, 2.27::gentoo
sys-devel/gcc: 5.4.0::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.10::gentoo (virtual/os-headers)
sys-libs/glibc: 2.23-r3::gentoo
Repositories:
alexxy
location: /var/lib/layman/alexxy
masters: gentoo
priority: -10001
benklop
location: /var/lib/layman/benklop
masters: gentoo
priority: -10001
c2p-overlay
location: /var/lib/layman/c2p-overlay
masters: gentoo
priority: -10001
eclipse
location: /var/lib/layman/eclipse
masters: gentoo
priority: -10001
haarp
location: /var/lib/layman/haarp
masters: gentoo
priority: -10001
jorgicio
location: /var/lib/layman/jorgicio
masters: gentoo
priority: -10001
proaudio
location: /var/lib/layman/proaudio
masters: gentoo
priority: -10001
ssnb
location: /var/lib/layman/ssnb
masters: gentoo
priority: -10001
sublime-text
location: /var/lib/layman/sublime-text
masters: gentoo
priority: -10001
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.europe.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-extra-opts: --timeout=600
x-portage
location: /usr/local/portage
masters: gentoo
priority: 0
crossdev
location: /usr/local/portage-crossdev
masters: gentoo
priority: 10
Installed sets: @gcc-toolchain
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fgraphite -flto=4 -flto-compression-level=9 -fopenmp "
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/maven-bin-3.3/conf /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php7.0/ext-active/ /etc/php/cgi-php7.0/ext-active/ /etc/php/cli-php7.0/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe -fgraphite -flto=4 -flto-compression-level=9 -fopenmp "
DISTDIR="/usr/distfiles"
EMERGE_DEFAULT_OPTS="--autounmask=n --misspell-suggestions=n --nospinner --tree --with-bdeps=y"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://gentoo.mirrors.ovh.net/gentoo-distfiles/ http://mirrors.linuxant.fr/distfiles.gentoo.org/ http://mirrors.stuhome.net/gentoo/ rsync://ftp.df.lth.se/pub/gentoo/ http://gentoo.mirrors.easynews.com/linux/gentoo/ ftp://mirror.neolabs.kz/gentoo/pub http://mirror.usu.edu/mirrors/gentoo/ http://mirror.iawnet.sandia.gov/gentoo/ rsync://gentoo.c3sl.ufpr.br/gentoo/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://ftp.swin.edu.au/gentoo ftp://ftp.swin.edu.au/gentoo"
LANG="fr_FR.utf8"
LDFLAGS="-Wl,-O2 -Wl,--enable-new-dtags -Wl,--as-needed -Wl,--sort-common -flto=4 -s"
MAKEOPTS="-j4 -l4"
PKGDIR="/usr/portage/packages"
PORTAGE_COMPRESS="lzma"
PORTAGE_COMPRESS_FLAGS="-9"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_EXTRA_OPTS="--timeout=600"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X acl amd64 bluetooth bzip2 cli consolekit cracklib crypt cxx dbus dri egl fftw fortran gdbm gif gles gles1 gles2 gmp iconv icu jack jpeg2k ladspa modules multilib multislot ncurses nls nptl openal opengl openmp pam pch pcre png policykit pulseaudio qt5 readline seccomp session sndfile sse sse2 sse4_1 ssl ssse3 svg system-icu tcpd threads tiff truetype udev udisks unicode upower v4l vaapi vdpau xinerama xvmc zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev synaptics" KERNEL="linux" L10N="fr" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="fr" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-0" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4 python3_5 python3_6" RUBY_TARGETS="ruby21" SANE_BACKENDS="artec_eplus48u" USERLAND="GNU" VIDEO_CARDS="intel i965" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
USE_PYTHON="2.7 3.4 3.5 3.6"
Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND
=================================================================
Package Settings
=================================================================
net-fs/samba-4.5.7::gentoo was built with the following:
USE="acl pam system-mitkrb5 -addc -addns -ads -client -cluster -cups -dmapi -fam -gnutls -gpg -iprint -ldap -quota (-selinux) -syslog (-system-heimdal) -systemd -test -winbind -zeroconf" ABI_X86="64 -32 -x32" PYTHON_TARGETS="python2_7"
CFLAGS="-march=native -O2 -pipe -fgraphite -flto=4 -flto-compression-level=9 -fopenmp -fno-graphite-identity -fno-ipa-pta -fno-loop-block -fno-loop-interchange -fno-loop-parallelize-all -fno-loop-strip-mine -fno-tree-loop-distribution -fno-tree-loop-linear -fno-lto -fno-use-linker-plugin -fno-openmp"
CXXFLAGS="-march=native -O2 -pipe -fgraphite -flto=4 -flto-compression-level=9 -fopenmp -fno-graphite-identity -fno-ipa-pta -fno-loop-block -fno-loop-interchange -fno-loop-parallelize-all -fno-loop-strip-mine -fno-tree-loop-distribution -fno-tree-loop-linear -fno-lto -fno-use-linker-plugin -fno-openmp"
LDFLAGS="-Wl,-O2 -Wl,--enable-new-dtags -Wl,--as-needed -Wl,--sort-common -flto=4 -s -fno-graphite-identity -fno-ipa-pta -fno-loop-block -fno-loop-interchange -fno-loop-parallelize-all -fno-loop-strip-mine -fno-tree-loop-distribution -fno-tree-loop-linear -fno-lto -fno-use-linker-plugin -fno-openmp -Wl,-fuse-ld=bfd |
Thks 4 ur interest. |
|
Back to top |
|
|
CaptainBlood Advocate
Joined: 24 Jan 2010 Posts: 3624
|
Posted: Mon Mar 27, 2017 7:02 pm Post subject: |
|
|
Must switch to ld.bfd @ binutils 2.26, though.
Please note no distcc there.
Thks 4 ur attention, interest & support. |
|
Back to top |
|
|
Naguissa n00b
Joined: 28 May 2004 Posts: 7 Location: Barcelona, España.
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|