Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[solved] Cannot associate with Wifi AP
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
esayem
n00b
n00b


Joined: 29 Nov 2015
Posts: 3

PostPosted: Sun Nov 29, 2015 11:13 pm    Post subject: [solved] Cannot associate with Wifi AP Reply with quote

Connecting to my Wifi access point fails with a CTRL-EVENT-ASSOC-REJECT error. This connection works fine from an Ubuntu 15.10 Live USB I've tested with. Any help would be awesome.

I've attempted these connections manually using wpa_supplicant. Below are my wpa_supplicant.conf file, the wpa_supplicant logs, and more info about my setup.

Note that the highest-priority connection in my wpa_supplicant.conf is for a hidden SSID that only accepts 5GHz connections. Running Ubuntu, connecting to this SSID works fine. Running Gentoo, the probe for this SSID doesn't return any results. Looking at the output of "iw phy", you can see why: The 5GHz band doesn't appear to be supported under Gentoo at all. I thought this might mean I have a regulatory domain problem, but the regulatory domain is "world" for both Ubuntu and Gentoo, and changing the domain using "iw reg set US" didn't help in Gentoo.

wpa_supplicant.conf
Code:

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel

# Home 5GHz
network={
   priority=1
   scan_ssid=1
   ssid="NETGEAR-5G"
   proto=RSN WPA
   pairwise=CCMP TKIP
   group=CCMP TKIP
   key_mgmt=WPA-PSK
   #psk=<redacted>
   psk=<redacted>
}

# Home 2.4GHz
network={
   ssid="NETGEAR"
   proto=RSN WPA
   pairwise=CCMP TKIP
   group=CCMP TKIP
   key_mgmt=WPA-PSK
   #psk=<redacted>
   psk=<redacted>
}


Gentoo Info (Linux 4.3.0)

wpa_supplicant Connection Attempt
Code:

wpa_supplicant v2.4
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
Priority group 1
   id=0 ssid='NETGEAR-5G'
Priority group 0
   id=1 ssid='NETGEAR'
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based roaming
nl80211: TDLS supported
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlp2s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1afc490
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0505
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
nl80211: driver param='(null)'
Add interface wlp2s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp2s0: Own MAC address: 00:90:4c:0d:f4:3e
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp2s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp2s0: Setting scan request: 0.100000 sec
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
ctrl_interface_group=10 (from group name 'wheel')
wlp2s0: Added interface wlp2s0
wlp2s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=5 linkmode=0 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=3 ifname=wlp2s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
wlp2s0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x1b1d2f0
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x1b1d2f0 after 0.000006 second wait
wlp2s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000017 seconds
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID 'NETGEAR-5G'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 0.657867 seconds
nl80211: Received scan results (6 BSSes)
wlp2s0: BSS: Start scan result update 1
wlp2s0: BSS: Add new id 0 BSSID c0:ff:d4:ac:d9:e0 SSID '2WIRE377_EXT'
wlp2s0: BSS: Add new id 1 BSSID 30:46:9a:9c:45:5c SSID 'NETGEAR'
wlp2s0: BSS: Add new id 2 BSSID ac:5d:10:4e:21:51 SSID '2WIRE377'
wlp2s0: BSS: Add new id 3 BSSID 12:86:8c:60:09:3e SSID ''
wlp2s0: BSS: Add new id 4 BSSID 88:1f:a1:2f:3a:b4 SSID 'son Wi-Fi Network'
wlp2s0: BSS: Add new id 5 BSSID 22:86:8c:60:09:3e SSID 'xfinitywifi'
BSS: last_scan_res_used=6/32
wlp2s0: New scan results available (own=1 ext=0)
wlp2s0: Radio work 'scan'@0x1b1d2f0 done in 0.659285 seconds
wlp2s0: Selecting BSS from priority group 1
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-47 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 2: ac:5d:10:4e:21:51 ssid='2WIRE377' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-69
wlp2s0:    skip - SSID mismatch
wlp2s0: 3: 12:86:8c:60:09:3e ssid='' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-81
wlp2s0:    skip - SSID not known
wlp2s0: 4: 88:1f:a1:2f:3a:b4 ssid='son Wi-Fi Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1511 level=-83
wlp2s0:    skip - SSID mismatch
wlp2s0: 5: 22:86:8c:60:09:3e ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-83
wlp2s0:    skip - SSID mismatch
wlp2s0: Selecting BSS from priority group 0
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-47 wps
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    selected based on WPA IE
wlp2s0:    selected BSS 30:46:9a:9c:45:5c ssid='NETGEAR'
wlp2s0: Considering connect request: reassociate: 0  selected: 30:46:9a:9c:45:5c  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x1afca70  current_ssid=(nil)
wlp2s0: Request association with 30:46:9a:9c:45:5c
wlp2s0: Add radio work 'connect'@0x1b1d250
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'connect'@0x1b1d250 after 0.000007 second wait
wlp2s0: Trying to associate with SSID 'NETGEAR'
wlp2s0: Cancelling scan request
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0x1afca70 try_opportunistic=0
RSN: Search for BSSID 30:46:9a:9c:45:5c
RSN: No PMKSA cache entry found
wlp2s0: WPA: using IEEE 802.11i/D3.0
wlp2s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
wlp2s0: WPA: Selected mgmt group cipher 0
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00
wlp2s0: WPA: using GTK TKIP
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
wlp2s0: State: SCANNING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888888889274c19 (mode change)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1afc490
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0505
nl80211: Key management set PSK
nl80211: Connect (ifindex=3)
  * bssid_hint=30:46:9a:9c:45:5c
  * freq_hint=2412
  * SSID - hexdump_ascii(len=7):
     4e 45 54 47 45 41 52                              NETGEAR         
  * IEs - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
  * WPA Versions 0x1
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * Auth Type 0
nl80211: Connect request send successfully
wlp2s0: Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
EAPOL: disable timer tick
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0
nl80211: Connect event (status=16 ignore_next_local_disconnect=0)
wlp2s0: Event ASSOC_REJECT (13) received
wlp2s0: CTRL-EVENT-ASSOC-REJECT status_code=16
wlp2s0: Radio work 'connect'@0x1b1d250 done in 8.677627 seconds
Added BSSID 00:00:00:00:00:00 into blacklist
wlp2s0: Blacklist count 1 --> request scan in 100 ms
wlp2s0: Setting scan request: 0.100000 sec
wlp2s0: State: ASSOCIATING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlp2s0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x1b1cea0 after 0.000006 second wait
wlp2s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000016 seconds
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID 'NETGEAR-5G'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 0.655266 seconds
nl80211: Received scan results (7 BSSes)
wlp2s0: BSS: Start scan result update 2
wlp2s0: BSS: Add new id 6 BSSID 38:2c:4a:50:e3:a0 SSID 'iJazmine2'
BSS: last_scan_res_used=7/32
wlp2s0: New scan results available (own=1 ext=0)
wlp2s0: Radio work 'scan'@0x1b1cea0 done in 0.659011 seconds
wlp2s0: Selecting BSS from priority group 1
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-44 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 2: ac:5d:10:4e:21:51 ssid='2WIRE377' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-68
wlp2s0:    skip - SSID mismatch
wlp2s0: 3: 38:2c:4a:50:e3:a0 ssid='iJazmine2' wpa_ie_len=0 rsn_ie_len=20 caps=0x1411 level=-80 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 4: 12:86:8c:60:09:3e ssid='' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-81
wlp2s0:    skip - SSID not known
wlp2s0: 5: 88:1f:a1:2f:3a:b4 ssid='son Wi-Fi Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1511 level=-83
wlp2s0:    skip - SSID mismatch
wlp2s0: 6: 22:86:8c:60:09:3e ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-81
wlp2s0:    skip - SSID mismatch
wlp2s0: Selecting BSS from priority group 0
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-44 wps
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    selected based on WPA IE
wlp2s0:    selected BSS 30:46:9a:9c:45:5c ssid='NETGEAR'
wlp2s0: Considering connect request: reassociate: 0  selected: 30:46:9a:9c:45:5c  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x1afca70  current_ssid=(nil)
wlp2s0: Request association with 30:46:9a:9c:45:5c
wlp2s0: Re-association to the same ESS
wlp2s0: Add radio work 'connect'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlp2s0: Starting radio work 'connect'@0x1b1cea0 after 0.000011 second wait
wlp2s0: Trying to associate with SSID 'NETGEAR'
wlp2s0: Cancelling scan request
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0x1afca70 try_opportunistic=0
RSN: Search for BSSID 30:46:9a:9c:45:5c
RSN: No PMKSA cache entry found
wlp2s0: WPA: using IEEE 802.11i/D3.0
wlp2s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
wlp2s0: WPA: Selected mgmt group cipher 0
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00
wlp2s0: WPA: using GTK TKIP
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
wlp2s0: State: SCANNING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888888889274c19 (mode change)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1afc490
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0505
nl80211: Key management set PSK
nl80211: Connect (ifindex=3)
  * bssid_hint=30:46:9a:9c:45:5c
  * freq_hint=2412
  * SSID - hexdump_ascii(len=7):
     4e 45 54 47 45 41 52                              NETGEAR         
  * IEs - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
  * WPA Versions 0x1
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * Auth Type 0
nl80211: Connect request send successfully
wlp2s0: Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0
nl80211: Connect event (status=16 ignore_next_local_disconnect=0)
wlp2s0: Event ASSOC_REJECT (13) received
wlp2s0: CTRL-EVENT-ASSOC-REJECT status_code=16
wlp2s0: Radio work 'connect'@0x1b1cea0 done in 8.672278 seconds
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
wlp2s0: Blacklist count 2 --> request scan in 500 ms
wlp2s0: Setting scan request: 0.500000 sec
wlp2s0: State: ASSOCIATING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlp2s0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x1b1cea0 after 0.000006 second wait
wlp2s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000016 seconds
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID 'NETGEAR-5G'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 0.657340 seconds
nl80211: Received scan results (7 BSSes)
wlp2s0: BSS: Start scan result update 3
BSS: last_scan_res_used=7/32
wlp2s0: New scan results available (own=1 ext=0)
wlp2s0: Radio work 'scan'@0x1b1cea0 done in 0.661039 seconds
wlp2s0: Selecting BSS from priority group 1
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-45 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-67 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 2: ac:5d:10:4e:21:51 ssid='2WIRE377' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-67
wlp2s0:    skip - SSID mismatch
wlp2s0: 3: 38:2c:4a:50:e3:a0 ssid='iJazmine2' wpa_ie_len=0 rsn_ie_len=20 caps=0x1411 level=-80 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 4: 12:86:8c:60:09:3e ssid='' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-81
wlp2s0:    skip - SSID not known
wlp2s0: 5: 88:1f:a1:2f:3a:b4 ssid='son Wi-Fi Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1511 level=-83
wlp2s0:    skip - SSID mismatch
wlp2s0: 6: 22:86:8c:60:09:3e ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-79
wlp2s0:    skip - SSID mismatch
wlp2s0: Selecting BSS from priority group 0
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-45 wps
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-67 wps
wlp2s0:    selected based on WPA IE
wlp2s0:    selected BSS 30:46:9a:9c:45:5c ssid='NETGEAR'
wlp2s0: Considering connect request: reassociate: 0  selected: 30:46:9a:9c:45:5c  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x1afca70  current_ssid=(nil)
wlp2s0: Request association with 30:46:9a:9c:45:5c
wlp2s0: Re-association to the same ESS
wlp2s0: Add radio work 'connect'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlp2s0: Starting radio work 'connect'@0x1b1cea0 after 0.000011 second wait
wlp2s0: Trying to associate with SSID 'NETGEAR'
wlp2s0: Cancelling scan request
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0x1afca70 try_opportunistic=0
RSN: Search for BSSID 30:46:9a:9c:45:5c
RSN: No PMKSA cache entry found
wlp2s0: WPA: using IEEE 802.11i/D3.0
wlp2s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
wlp2s0: WPA: Selected mgmt group cipher 0
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00
wlp2s0: WPA: using GTK TKIP
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
wlp2s0: State: SCANNING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888888889274c19 (mode change)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1afc490
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0505
nl80211: Key management set PSK
nl80211: Connect (ifindex=3)
  * bssid_hint=30:46:9a:9c:45:5c
  * freq_hint=2412
  * SSID - hexdump_ascii(len=7):
     4e 45 54 47 45 41 52                              NETGEAR         
  * IEs - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
  * WPA Versions 0x1
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * Auth Type 0
nl80211: Connect request send successfully
wlp2s0: Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0
nl80211: Connect event (status=16 ignore_next_local_disconnect=0)
wlp2s0: Event ASSOC_REJECT (13) received
wlp2s0: CTRL-EVENT-ASSOC-REJECT status_code=16
wlp2s0: Radio work 'connect'@0x1b1cea0 done in 8.671968 seconds
BSSID 00:00:00:00:00:00 blacklist count incremented to 3
wlp2s0: Blacklist count 3 --> request scan in 1000 ms
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: ASSOCIATING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=DISCONNECTED bssid=00:00:00:00:00:00)
wlp2s0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x1b1cea0 after 0.000006 second wait
wlp2s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000017 seconds
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID 'NETGEAR-5G'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 0.662763 seconds
nl80211: Received scan results (7 BSSes)
wlp2s0: BSS: Start scan result update 4
BSS: last_scan_res_used=7/32
wlp2s0: New scan results available (own=1 ext=0)
wlp2s0: Radio work 'scan'@0x1b1cea0 done in 0.664135 seconds
wlp2s0: Selecting BSS from priority group 1
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-44 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 2: ac:5d:10:4e:21:51 ssid='2WIRE377' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-66
wlp2s0:    skip - SSID mismatch
wlp2s0: 3: 38:2c:4a:50:e3:a0 ssid='iJazmine2' wpa_ie_len=0 rsn_ie_len=20 caps=0x1411 level=-79 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 4: 12:86:8c:60:09:3e ssid='' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-81
wlp2s0:    skip - SSID not known
wlp2s0: 5: 88:1f:a1:2f:3a:b4 ssid='son Wi-Fi Network' wpa_ie_len=0 rsn_ie_len=20 caps=0x1511 level=-84
wlp2s0:    skip - SSID mismatch
wlp2s0: 6: 22:86:8c:60:09:3e ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-79
wlp2s0:    skip - SSID mismatch
wlp2s0: Selecting BSS from priority group 0
wlp2s0: 0: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-44 wps
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-65 wps
wlp2s0:    selected based on WPA IE
wlp2s0:    selected BSS 30:46:9a:9c:45:5c ssid='NETGEAR'
wlp2s0: Considering connect request: reassociate: 0  selected: 30:46:9a:9c:45:5c  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x1afca70  current_ssid=(nil)
wlp2s0: Request association with 30:46:9a:9c:45:5c
wlp2s0: Re-association to the same ESS
wlp2s0: Add radio work 'connect'@0x1b1cea0
wlp2s0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlp2s0: Starting radio work 'connect'@0x1b1cea0 after 0.000011 second wait
wlp2s0: Trying to associate with SSID 'NETGEAR'
wlp2s0: Cancelling scan request
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0x1afca70 try_opportunistic=0
RSN: Search for BSSID 30:46:9a:9c:45:5c
RSN: No PMKSA cache entry found
wlp2s0: WPA: using IEEE 802.11i/D3.0
wlp2s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
wlp2s0: WPA: Selected mgmt group cipher 0
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00
wlp2s0: WPA: using GTK TKIP
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
wlp2s0: State: SCANNING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888888889274c19 (mode change)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1afc490
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1afc490 match=0505
nl80211: Key management set PSK
nl80211: Connect (ifindex=3)
  * bssid_hint=30:46:9a:9c:45:5c
  * freq_hint=2412
  * SSID - hexdump_ascii(len=7):
     4e 45 54 47 45 41 52                              NETGEAR         
  * IEs - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
  * WPA Versions 0x1
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * Auth Type 0
nl80211: Connect request send successfully
wlp2s0: Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
l2_packet_receive: src=30:46:9a:9c:45:5c len=99
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5c
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)


lspci
Code:

02:00.0 Network controller: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC (rev 01)
   Subsystem: Dell BCM43602 802.11ac Wireless LAN SoC
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 133
   Region 0: Memory at dd800000 (64-bit, non-prefetchable) [size=32K]
   Region 2: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
   Capabilities: [48] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
   Capabilities: [58] MSI: Enable+ Count=1/16 Maskable- 64bit+
      Address: 00000000feeff00c  Data: 4192
   Capabilities: [68] Vendor Specific Information: Len=44 <?>
   Capabilities: [ac] Express (v2) Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
         MaxPayload 256 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via WAKE#
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [13c v1] Device Serial Number 77-25-c7-ff-ff-c6-60-6d
   Capabilities: [150 v1] Power Budgeting <?>
   Capabilities: [160 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
   Capabilities: [1b0 v1] Latency Tolerance Reporting
      Max snoop latency: 71680ns
      Max no snoop latency: 71680ns
   Capabilities: [220 v1] #15
   Capabilities: [240 v1] L1 PM Substates
      L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
           PortCommonModeRestoreTime=0us PortTPowerOnTime=50us
   Kernel driver in use: brcmfmac
   Kernel modules: brcmfmac


iw phy
Code:

Wiphy phy0
   max # scan SSIDs: 10
   max scan IEs length: 2048 bytes
   Retry short limit: 7
   Retry long limit: 4
   Coverage class: 0 (up to 0m)
   Device supports roaming.
   Device supports T-DLS.
   Supported Ciphers:
      * WEP40 (00-0f-ac:1)
      * WEP104 (00-0f-ac:5)
      * TKIP (00-0f-ac:2)
      * CCMP (00-0f-ac:4)
      * CMAC (00-0f-ac:6)
   Available Antennas: TX 0 RX 0
   Supported interface modes:
       * IBSS
       * managed
       * AP
       * P2P-client
       * P2P-GO
       * P2P-device
   Band 1:
      Capabilities: 0x1022
         HT20/HT40
         Static SM Power Save
         RX HT20 SGI
         No RX STBC
         Max AMSDU length: 3839 bytes
         DSSS/CCK HT40
      Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
      Minimum RX AMPDU time spacing: 16 usec (0x07)
      HT TX/RX MCS rate indexes supported: 0-23
      Bitrates (non-HT):
         * 1.0 Mbps
         * 2.0 Mbps (short preamble supported)
         * 5.5 Mbps (short preamble supported)
         * 11.0 Mbps (short preamble supported)
         * 6.0 Mbps
         * 9.0 Mbps
         * 12.0 Mbps
         * 18.0 Mbps
         * 24.0 Mbps
         * 36.0 Mbps
         * 48.0 Mbps
         * 54.0 Mbps
      Frequencies:
         * 2412 MHz [1] (20.0 dBm)
         * 2417 MHz [2] (20.0 dBm)
         * 2422 MHz [3] (20.0 dBm)
         * 2427 MHz [4] (20.0 dBm)
         * 2432 MHz [5] (20.0 dBm)
         * 2437 MHz [6] (20.0 dBm)
         * 2442 MHz [7] (20.0 dBm)
         * 2447 MHz [8] (20.0 dBm)
         * 2452 MHz [9] (20.0 dBm)
         * 2457 MHz [10] (20.0 dBm)
         * 2462 MHz [11] (20.0 dBm)
         * 2467 MHz [12] (disabled)
         * 2472 MHz [13] (disabled)
         * 2484 MHz [14] (disabled)
   Supported commands:
       * new_interface
       * set_interface
       * new_key
       * start_ap
       * join_ibss
       * set_pmksa
       * del_pmksa
       * flush_pmksa
       * remain_on_channel
       * frame
       * set_channel
       * tdls_oper
       * start_p2p_device
       * crit_protocol_start
       * crit_protocol_stop
       * connect
       * disconnect
   Supported TX frame types:
       * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
   Supported RX frame types:
       * managed: 0x40 0xd0
       * P2P-client: 0x40 0xd0
       * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
       * P2P-device: 0x40 0xd0
   WoWLAN support:
       * wake up on disconnect
       * wake up on magic packet
       * wake up on pattern match, up to 8 patterns of 1-128 bytes,
         maximum packet offset 1500 bytes
   software interface modes (can always be added):
   valid interface combinations:
       * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
         total <= 3, #channels <= 2
       * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
         total <= 4, #channels <= 1
       * #{ AP } <= 4,
         total <= 4, #channels <= 1, STA/AP BI must match
   Device supports scan flush.


Kernel Modules
Code:

filename:       /lib/modules/4.3.0-gentoo/kernel/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
license:        Dual BSD/GPL
description:    Broadcom 802.11 wireless LAN fullmac driver.
author:         Broadcom Corporation
firmware:       brcm/brcmfmac4358-pcie.txt
firmware:       brcm/brcmfmac4358-pcie.bin
firmware:       brcm/brcmfmac43570-pcie.txt
firmware:       brcm/brcmfmac43570-pcie.bin
firmware:       brcm/brcmfmac4356-pcie.txt
firmware:       brcm/brcmfmac4356-pcie.bin
firmware:       brcm/brcmfmac43602-pcie.txt
firmware:       brcm/brcmfmac43602-pcie.bin
alias:          pci:v000014E4d0000AA52sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BCsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BBsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BAsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043E9sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043D9sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043D3sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043ECsv*sd*bc02sc80i*
depends:        brcmutil,cfg80211
intree:         Y
vermagic:       4.3.0-gentoo SMP mod_unload
parm:           firmware_path:string
parm:           debug:level of debug output (int)
parm:           fcmode:mode of firmware signalled flow control (int)
parm:           roamoff:do not use internal roaming engine (int)

filename:       /lib/modules/4.3.0-gentoo/kernel/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
license:        Dual BSD/GPL
description:    Broadcom 802.11n wireless LAN driver utilities.
author:         Broadcom Corporation
depends:       
intree:         Y
vermagic:       4.3.0-gentoo SMP mod_unload

filename:       /lib/modules/4.3.0-gentoo/kernel/net/wireless/cfg80211.ko
alias:          net-pf-16-proto-16-family-nl80211
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
depends:       
intree:         Y
vermagic:       4.3.0-gentoo SMP mod_unload
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)


Regulatory Domain
Code:

[    1.953733] cfg80211: World regulatory domain updated:
[    1.953734] cfg80211:  DFS Master region: unset
[    1.953734] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    1.953735] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.953736] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.953736] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    1.953737] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    1.953738] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    1.953739] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    1.953740] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.953740] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

country 00: DFS-UNSET
   (2402 - 2472 @ 40), (N/A, 20), (N/A)
   (2457 - 2482 @ 40), (N/A, 20), (N/A), PASSIVE-SCAN
   (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
   (5170 - 5250 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
   (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
   (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
   (5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
   (57240 - 63720 @ 2160), (N/A, 0), (N/A)


Ubuntu Info (Linux 4.2.0-16-generic)

wpa_supplicant Connection Attempt
[code]
wpa_supplicant v2.4
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf' -> '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf'
Reading configuration file '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant'
Priority group 1
id=0 ssid='NETGEAR-5G'
Priority group 0
id=1 ssid='NETGEAR'
rfkill: initial event: idx=0 type=2 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based roaming
nl80211: TDLS supported
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlp2s0 in phy phy0
nl80211: Set mode ifindex 2 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x55ef541d1e70
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0409506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=7f506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x


Last edited by esayem on Fri Dec 04, 2015 6:31 am; edited 1 time in total
Back to top
View user's profile Send private message
esayem
n00b
n00b


Joined: 29 Nov 2015
Posts: 3

PostPosted: Sun Nov 29, 2015 11:16 pm    Post subject: Reply with quote

Looks like my original post was too long. Here's the Ubuntu info:

Ubuntu Info (Linux 4.2.0-16-generic)

wpa_supplicant Connection Attempt
Code:

wpa_supplicant v2.4
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf' -> '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf'
Reading configuration file '/mnt/gentoo/home/user/wifi/ubuntu/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant'
Priority group 1
   id=0 ssid='NETGEAR-5G'
Priority group 0
   id=1 ssid='NETGEAR'
rfkill: initial event: idx=0 type=2 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based roaming
nl80211: TDLS supported
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlp2s0 in phy phy0
nl80211: Set mode ifindex 2 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x55ef541d1e70
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0409506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=7f506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040e
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0505
netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
nl80211: driver param='(null)'
Add interface wlp2s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp2s0: Own MAC address: 60:6d:c7:c6:77:25
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp2s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp2s0: Setting scan request: 0.100000 sec
TDLS: TDLS operation supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlp2s0: WPS: UUID based on MAC address: 48381c29-9edc-5d58-9a84-928c3deaa157
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp2s0: Added interface wlp2s0
wlp2s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
nl80211: Create interface iftype 10 (P2P_DEVICE)
Failed to create interface p2p-dev-wlp2s0: -5 (Input/output error)
nl80211: Failed to create a P2P Device interface p2p-dev-wlp2s0
P2P: Failed to create P2P Device interface
P2P: Failed to enable P2P Device interface
wlp2s0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x55ef541f2d30
wlp2s0: First radio work item in the queue - schedule start immediately
random: Got 20/20 bytes from /dev/random
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 operstate=5 linkmode=0 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
wlp2s0: Starting radio work 'scan'@0x55ef541f2d30 after 0.000043 second wait
wlp2s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0
wlp2s0: nl80211: Scan trigger
wlp2s0: Event SCAN_STARTED (47) received
wlp2s0: Own scan request started a scan in 0.000041 seconds
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0
wlp2s0: nl80211: New scan results available
nl80211: Scan probed for SSID 'NETGEAR-5G'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
wlp2s0: Event SCAN_RESULTS (3) received
wlp2s0: Scan completed in 3.077497 seconds
nl80211: Received scan results (10 BSSes)
wlp2s0: BSS: Start scan result update 1
wlp2s0: BSS: Add new id 0 BSSID 38:2c:4a:50:e3:a4 SSID 'iJazmine2'
wlp2s0: BSS: Add new id 1 BSSID c0:ff:d4:ac:d9:e0 SSID '2WIRE377_EXT'
wlp2s0: BSS: Add new id 2 BSSID 30:46:9a:9c:45:5c SSID 'NETGEAR'
wlp2s0: BSS: Add new id 3 BSSID 30:46:9a:9c:45:5b SSID 'NETGEAR-5G'
wlp2s0: BSS: Add new id 4 BSSID ac:5d:10:4e:21:51 SSID '2WIRE377'
wlp2s0: BSS: Add new id 5 BSSID 12:86:8c:60:09:3e SSID ''
wlp2s0: BSS: Add new id 6 BSSID 38:2c:4a:50:e3:a0 SSID 'iJazmine2'
wlp2s0: BSS: Add new id 7 BSSID 00:24:01:cc:2d:70 SSID 'BMW'
wlp2s0: BSS: Add new id 8 BSSID 22:86:8c:60:09:3e SSID 'xfinitywifi'
wlp2s0: BSS: Add new id 9 BSSID 46:32:c8:57:f0:8e SSID 'xfinitywifi'
BSS: last_scan_res_used=10/32
wlp2s0: New scan results available (own=1 ext=0)
WPS: AP c0:ff:d4:ac:d9:e0 type 0 added
WPS: AP 30:46:9a:9c:45:5c type 0 added
WPS: AP 30:46:9a:9c:45:5b type 0 added
WPS: AP 38:2c:4a:50:e3:a0 type 0 added
WPS: AP 00:24:01:cc:2d:70 type 0 added
WPS: AP[0] c0:ff:d4:ac:d9:e0 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[1] 30:46:9a:9c:45:5c type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[2] 30:46:9a:9c:45:5b type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[3] 38:2c:4a:50:e3:a0 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[4] 00:24:01:cc:2d:70 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlp2s0: Radio work 'scan'@0x55ef541f2d30 done in 3.116966 seconds
wlp2s0: Selecting BSS from priority group 1
wlp2s0: 0: 38:2c:4a:50:e3:a4 ssid='iJazmine2' wpa_ie_len=0 rsn_ie_len=20 caps=0x1011 level=-87
wlp2s0:    skip - SSID mismatch
wlp2s0: 1: c0:ff:d4:ac:d9:e0 ssid='2WIRE377_EXT' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-41 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 2: 30:46:9a:9c:45:5c ssid='NETGEAR' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-56 wps
wlp2s0:    skip - SSID mismatch
wlp2s0: 3: 30:46:9a:9c:45:5b ssid='NETGEAR-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-79 wps
wlp2s0:    selected based on RSN IE
wlp2s0:    selected BSS 30:46:9a:9c:45:5b ssid='NETGEAR-5G'
wlp2s0: Considering connect request: reassociate: 0  selected: 30:46:9a:9c:45:5b  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x55ef541d2030  current_ssid=(nil)
wlp2s0: Request association with 30:46:9a:9c:45:5b
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=12): 00 0a 4e 45 54 47 45 41 52 2d 35 47
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=24): 3d 16 24 0d 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
wlp2s0: Add radio work 'connect'@0x55ef541f2d30
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'connect'@0x55ef541f2d30 after 0.000006 second wait
wlp2s0: Trying to associate with SSID 'NETGEAR-5G'
wlp2s0: Cancelling scan request
wlp2s0: WPA: clearing own WPA/RSN IE
wlp2s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0x55ef541d2030 try_opportunistic=0
RSN: Search for BSSID 30:46:9a:9c:45:5b
RSN: No PMKSA cache entry found
wlp2s0: RSN: using IEEE 802.11i/D9.0
wlp2s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
wlp2s0: WPA: Selected mgmt group cipher 32
wlp2s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
wlp2s0: WPA: using GTK CCMP
wlp2s0: WPA: using PTK CCMP
wlp2s0: WPA: using KEY_MGMT WPA-PSK
wlp2s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp2s0: State: SCANNING -> ASSOCIATING
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: set_disable_max_amsdu: -1
wlp2s0: set_ampdu_factor: -1
wlp2s0: set_ampdu_density: -1
wlp2s0: set_disable_ht40: 0
wlp2s0: set_disable_sgi: 0
wlp2s0: set_disable_ldpc: 0
nl80211: Set mode ifindex 2 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888dd67dc9596f9 (mode change)
nl80211: Subscribe to mgmt frames with non-AP handle 0x55ef541d1e70
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0409506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=7f506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=040e
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x55ef541d1e70 match=0505
nl80211: Key management set PSK
nl80211: Connect (ifindex=2)
  * bssid_hint=30:46:9a:9c:45:5b
  * freq_hint=5180
  * SSID - hexdump_ascii(len=10):
     4e 45 54 47 45 41 52 2d 35 47                     NETGEAR-5G     
  * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  * WPA Versions 0x2
  * pairwise=0xfac04
  * group=0xfac04
  * akm=0xfac02
  * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  * Auth Type 0
nl80211: Connect request send successfully
wlp2s0: Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
l2_packet_receive: src=30:46:9a:9c:45:5b len=121
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5b
wlp2s0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0
nl80211: Connect event (status=0 ignore_next_local_disconnect=0)
nl80211: Associated on 5180 MHz
nl80211: Associated with 30:46:9a:9c:45:5b
nl80211: Operating frequency for the associated BSS from scan results: 5180 MHz
wlp2s0: Event ASSOC (0) received
wlp2s0: Association info event
req_ies - hexdump(len=147): 00 0a 4e 45 54 47 45 41 52 2d 35 47 01 08 8c 12 98 24 b0 48 60 6c 21 02 06 e0 24 0a 24 04 34 04 64 0c 95 04 a5 01 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 2d 1a ef 01 17 ff ff 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 01 01 dd 1e 00 90 4c 33 ef 01 17 ff ff 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 00 00 80 00
resp_ies - hexdump(len=165): 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 7e 08 1b ff ff 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 24 0d 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 03 f0 05 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 08 1b ff ff 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 24 0d 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 7c
WPA: Unrecognized EAPOL-Key Key Data IE - hexdump(len=24): 3d 16 24 0d 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: WMM Parameter Element - hexdump(len=24): 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
WPA: EAPOL-Key Key Data underflow (ie=0 len=128 pos=159)
WPA: Key Data - hexdump(len=165): [REMOVED]
IEEE 802.11 element parse failed (id=0 elen=128 left=4)
wlp2s0: freq=5180 MHz
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
Truncated IE in assoc_info - hexdump(len=6): 00 80 00 00 00 7c
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
wlp2s0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: Associated to a new BSS: BSSID=30:46:9a:9c:45:5b
wlp2s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
wlp2s0: Associated with 30:46:9a:9c:45:5b
wlp2s0: WPA: Association event - clear replay counter
wlp2s0: WPA: Clear old PTK
TDLS: Remove peers on association
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
wlp2s0: Setting authentication timeout: 10 sec 0 usec
wlp2s0: Cancelling scan request
wlp2s0: Process pending EAPOL frame that was received just before association notification
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5b
wlp2s0: Setting authentication timeout: 10 sec 0 usec
wlp2s0: IEEE 802.1X RX: version=2 type=3 length=117
wlp2s0:   EAPOL-Key type=2
wlp2s0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
wlp2s0:   key_length=16 key_data_length=22
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_nonce - hexdump(len=32): c7 0f e1 36 e7 a3 79 ef cc 4d b3 5c 71 80 b7 c1 a3 74 45 7d e0 21 90 49 77 e5 13 d3 a0 4d 0f 67
  key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlp2s0: State: ASSOCIATED -> 4WAY_HANDSHAKE
wlp2s0: WPA: RX message 1 of 4-Way Handshake from 30:46:9a:9c:45:5b (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 ba 4f 9a b9 38 2b 45 d0 9f b4 c1 3f 58 e8 c5 9e
WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 ba 4f 9a b9 38 2b 45 d0 9f b4 c1 3f 58 e8 c5 9e
RSN: PMKID from Authenticator - hexdump(len=16): ba 4f 9a b9 38 2b 45 d0 9f b4 c1 3f 58 e8 c5 9e
wlp2s0: RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 68 c2 9c 9c a2 fb 5d 25 2d d4 5b a2 32 bd 02 68 1d 11 86 5b d7 83 45 ec ab 01 8e 48 56 76 5d 50
WPA: PTK derivation - A1=60:6d:c7:c6:77:25 A2=30:46:9a:9c:45:5b
WPA: Nonce1 - hexdump(len=32): 68 c2 9c 9c a2 fb 5d 25 2d d4 5b a2 32 bd 02 68 1d 11 86 5b d7 83 45 ec ab 01 8e 48 56 76 5d 50
WPA: Nonce2 - hexdump(len=32): c7 0f e1 36 e7 a3 79 ef cc 4d b3 5c 71 80 b7 c1 a3 74 45 7d e0 21 90 49 77 e5 13 d3 a0 4d 0f 67
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: KEK - hexdump(len=16): [REMOVED]
WPA: TK - hexdump(len=16): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 00
wlp2s0: WPA: Sending EAPOL-Key 2/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 56 9d 01 3a 40 26 7b 5f b4 53 a3 09 61 8e e9 2b
WMM AC: Missing U-APSD configuration
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
l2_packet_receive: src=30:46:9a:9c:45:5b len=155
wlp2s0: RX EAPOL from 30:46:9a:9c:45:5b
wlp2s0: IEEE 802.1X RX: version=2 type=3 length=151
wlp2s0:   EAPOL-Key type=2
wlp2s0:   key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
wlp2s0:   key_length=16 key_data_length=56
  replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
  key_nonce - hexdump(len=32): c7 0f e1 36 e7 a3 79 ef cc 4d b3 5c 71 80 b7 c1 a3 74 45 7d e0 21 90 49 77 e5 13 d3 a0 4d 0f 67
  key_iv - hexdump(len=16): a3 74 45 7d e0 21 90 49 77 e5 13 d3 a0 4d 0f 68
  key_rsc - hexdump(len=8): 91 e9 0b 00 00 00 00 00
  key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
  key_mic - hexdump(len=16): 24 96 04 bb 9f 94 04 89 19 27 b2 55 6f c8 a6 00
RSN: encrypted key data - hexdump(len=56): c7 a3 de 0f 50 31 d4 9c 80 f0 82 1a 3c 33 98 84 32 ae 31 6f 47 40 89 13 b0 3e 8a dd c7 e6 5a 3f db 10 12 53 a4 ce cf ba 80 84 24 cb 76 ec 64 2e 06 61 3a 66 e6 91 81 33
WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
wlp2s0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
wlp2s0: WPA: RX message 3 of 4-Way Handshake from 30:46:9a:9c:45:5b (ver=2)
WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 ee 4f 0b 0c 78 02 d2 82 55 92 fe dd 85 f2 11 1d dd 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
wlp2s0: WPA: Sending EAPOL-Key 4/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 79 fd 2c b3 64 09 3f bd 30 51 ee dc a7 05 76 d0
wlp2s0: WPA: Installing PTK to the driver
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=3 addr=0x55ef541d3ba0 key_idx=0 set_tx=1 seq_len=6 key_len=16
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
   addr=30:46:9a:9c:45:5b
EAPOL: External notification - portValid=1
wlp2s0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
wlp2s0: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16)
WPA: RSC - hexdump(len=6): 91 e9 0b 00 00 00
wpa_driver_nl80211_set_key: ifindex=2 (wlp2s0) alg=3 addr=0x55ef537bac24 key_idx=1 set_tx=0 seq_len=6 key_len=16
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 91 e9 0b 00 00 00
   broadcast key
wlp2s0: WPA: Key negotiation completed with 30:46:9a:9c:45:5b [PTK=CCMP GTK=CCMP]
wlp2s0: Cancelling authentication timeout
wlp2s0: State: GROUP_HANDSHAKE -> COMPLETED
wlp2s0: Radio work 'connect'@0x55ef541f2d30 done in 3.236454 seconds
wlp2s0: CTRL-EVENT-CONNECTED - Connection to 30:46:9a:9c:45:5b completed [id=0 id_str=]
nl80211: Set wlp2s0 operstate 0->1 (UP)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
nl80211: Set supplicant port authorized for 30:46:9a:9c:45:5b
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed - result=SUCCESS
nl80211: Set rekey offload
nl80211: Driver does not support rekey offload
RTM_NEWLINK: ifi_index=2 ifname=wlp2s0 operstate=6 linkmode=1 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
EAPOL: startWhen --> 0
EAPOL: disable timer tick


lspci
Code:

02:00.0 Network controller: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC (rev 01)
   Subsystem: Dell Device 0024
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 137
   Region 0: Memory at dd800000 (64-bit, non-prefetchable) [size=32K]
   Region 2: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
   Capabilities: [48] Power Management version 3
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
   Capabilities: [58] MSI: Enable+ Count=1/16 Maskable- 64bit+
      Address: 00000000fee00438  Data: 0000
   Capabilities: [68] Vendor Specific Information: Len=44 <?>
   Capabilities: [ac] Express (v2) Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
         MaxPayload 256 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via WAKE#
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
   Capabilities: [100 v1] Advanced Error Reporting
      UESta:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UEMsk:   DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
      UESvrt:   DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
      CESta:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      CEMsk:   RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
      AERCap:   First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
   Capabilities: [13c v1] Device Serial Number 77-25-c7-ff-ff-c6-60-6d
   Capabilities: [150 v1] Power Budgeting <?>
   Capabilities: [160 v1] Virtual Channel
      Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
      Arb:   Fixed- WRR32- WRR64- WRR128-
      Ctrl:   ArbSelect=Fixed
      Status:   InProgress-
      VC0:   Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
         Arb:   Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
         Status:   NegoPending- InProgress-
   Capabilities: [1b0 v1] Latency Tolerance Reporting
      Max snoop latency: 71680ns
      Max no snoop latency: 71680ns
   Capabilities: [220 v1] #15
   Capabilities: [240 v1] L1 PM Substates
      L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
           PortCommonModeRestoreTime=0us PortTPowerOnTime=50us
   Kernel driver in use: brcmfmac


iw phy
Code:

Wiphy phy0
   max # scan SSIDs: 10
   max scan IEs length: 2048 bytes
   Retry short limit: 7
   Retry long limit: 4
   Coverage class: 0 (up to 0m)
   Device supports roaming.
   Device supports T-DLS.
   Supported Ciphers:
      * WEP40 (00-0f-ac:1)
      * WEP104 (00-0f-ac:5)
      * TKIP (00-0f-ac:2)
      * CCMP (00-0f-ac:4)
      * CMAC (00-0f-ac:6)
   Available Antennas: TX 0 RX 0
   Supported interface modes:
       * IBSS
       * managed
       * AP
       * P2P-client
       * P2P-GO
       * P2P-device
   Band 1:
      Capabilities: 0x1022
         HT20/HT40
         Static SM Power Save
         RX HT20 SGI
         No RX STBC
         Max AMSDU length: 3839 bytes
         DSSS/CCK HT40
      Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
      Minimum RX AMPDU time spacing: 16 usec (0x07)
      HT TX/RX MCS rate indexes supported: 0-23
      Bitrates (non-HT):
         * 1.0 Mbps
         * 2.0 Mbps (short preamble supported)
         * 5.5 Mbps (short preamble supported)
         * 11.0 Mbps (short preamble supported)
         * 6.0 Mbps
         * 9.0 Mbps
         * 12.0 Mbps
         * 18.0 Mbps
         * 24.0 Mbps
         * 36.0 Mbps
         * 48.0 Mbps
         * 54.0 Mbps
      Frequencies:
         * 2412 MHz [1] (20.0 dBm)
         * 2417 MHz [2] (20.0 dBm)
         * 2422 MHz [3] (20.0 dBm)
         * 2427 MHz [4] (20.0 dBm)
         * 2432 MHz [5] (20.0 dBm)
         * 2437 MHz [6] (20.0 dBm)
         * 2442 MHz [7] (20.0 dBm)
         * 2447 MHz [8] (20.0 dBm)
         * 2452 MHz [9] (20.0 dBm)
         * 2457 MHz [10] (20.0 dBm)
         * 2462 MHz [11] (20.0 dBm)
         * 2467 MHz [12] (20.0 dBm) (no IR)
         * 2472 MHz [13] (20.0 dBm) (no IR)
         * 2484 MHz [14] (disabled)
   Band 2:
      Capabilities: 0x1062
         HT20/HT40
         Static SM Power Save
         RX HT20 SGI
         RX HT40 SGI
         No RX STBC
         Max AMSDU length: 3839 bytes
         DSSS/CCK HT40
      Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
      Minimum RX AMPDU time spacing: 16 usec (0x07)
      HT TX/RX MCS rate indexes supported: 0-23
      VHT Capabilities (0x00000020):
         Max MPDU length: 3895
         Supported Channel Width: neither 160 nor 80+80
         short GI (80 MHz)
      VHT RX MCS set:
         1 streams: MCS 0-9
         2 streams: MCS 0-9
         3 streams: MCS 0-9
         4 streams: not supported
         5 streams: not supported
         6 streams: not supported
         7 streams: not supported
         8 streams: not supported
      VHT RX highest supported: 0 Mbps
      VHT TX MCS set:
         1 streams: MCS 0-9
         2 streams: MCS 0-9
         3 streams: MCS 0-9
         4 streams: not supported
         5 streams: not supported
         6 streams: not supported
         7 streams: not supported
         8 streams: not supported
      VHT TX highest supported: 0 Mbps
      Bitrates (non-HT):
         * 6.0 Mbps
         * 9.0 Mbps
         * 12.0 Mbps
         * 18.0 Mbps
         * 24.0 Mbps
         * 36.0 Mbps
         * 48.0 Mbps
         * 54.0 Mbps
      Frequencies:
         * 5170 MHz [34] (disabled)
         * 5180 MHz [36] (20.0 dBm)
         * 5190 MHz [38] (disabled)
         * 5200 MHz [40] (20.0 dBm)
         * 5210 MHz [42] (disabled)
         * 5220 MHz [44] (20.0 dBm)
         * 5230 MHz [46] (disabled)
         * 5240 MHz [48] (20.0 dBm)
         * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5720 MHz [144] (20.0 dBm) (no IR, radar detection)
           DFS state: usable (for 325 sec)
           DFS CAC time: 60000 ms
         * 5745 MHz [149] (20.0 dBm)
         * 5765 MHz [153] (20.0 dBm)
         * 5785 MHz [157] (20.0 dBm)
         * 5805 MHz [161] (20.0 dBm)
         * 5825 MHz [165] (20.0 dBm)
   Supported commands:
       * new_interface
       * set_interface
       * new_key
       * start_ap
       * join_ibss
       * set_pmksa
       * del_pmksa
       * flush_pmksa
       * remain_on_channel
       * frame
       * set_channel
       * tdls_oper
       * start_p2p_device
       * crit_protocol_start
       * crit_protocol_stop
       * connect
       * disconnect
   Supported TX frame types:
       * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
       * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
   Supported RX frame types:
       * managed: 0x40 0xd0
       * P2P-client: 0x40 0xd0
       * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
       * P2P-device: 0x40 0xd0
   WoWLAN support:
       * wake up on disconnect
       * wake up on magic packet
       * wake up on pattern match, up to 8 patterns of 1-128 bytes,
         maximum packet offset 1500 bytes
   software interface modes (can always be added):
   valid interface combinations:
       * #{ managed } <= 1, #{ AP } <= 4, #{ P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
         total <= 7, #channels <= 2
   Device supports scan flush.


Kernel Modules
Code:

filename:       /lib/modules/4.2.0-16-generic/kernel/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
license:        Dual BSD/GPL
description:    Broadcom 802.11 wireless LAN fullmac driver.
author:         Broadcom Corporation
firmware:       brcm/brcmfmac4354-sdio.txt
firmware:       brcm/brcmfmac4354-sdio.bin
firmware:       brcm/brcmfmac43455-sdio.txt
firmware:       brcm/brcmfmac43455-sdio.bin
firmware:       brcm/brcmfmac43430-sdio.txt
firmware:       brcm/brcmfmac43430-sdio.bin
firmware:       brcm/brcmfmac4339-sdio.txt
firmware:       brcm/brcmfmac4339-sdio.bin
firmware:       brcm/brcmfmac43362-sdio.txt
firmware:       brcm/brcmfmac43362-sdio.bin
firmware:       brcm/brcmfmac4335-sdio.txt
firmware:       brcm/brcmfmac4335-sdio.bin
firmware:       brcm/brcmfmac43340-sdio.txt
firmware:       brcm/brcmfmac43340-sdio.bin
firmware:       brcm/brcmfmac4334-sdio.txt
firmware:       brcm/brcmfmac4334-sdio.bin
firmware:       brcm/brcmfmac4330-sdio.txt
firmware:       brcm/brcmfmac4330-sdio.bin
firmware:       brcm/brcmfmac4329-sdio.txt
firmware:       brcm/brcmfmac4329-sdio.bin
firmware:       brcm/brcmfmac43241b5-sdio.txt
firmware:       brcm/brcmfmac43241b5-sdio.bin
firmware:       brcm/brcmfmac43241b4-sdio.txt
firmware:       brcm/brcmfmac43241b4-sdio.bin
firmware:       brcm/brcmfmac43241b0-sdio.txt
firmware:       brcm/brcmfmac43241b0-sdio.bin
firmware:       brcm/brcmfmac43143-sdio.txt
firmware:       brcm/brcmfmac43143-sdio.bin
firmware:       brcm/brcmfmac43569.bin
firmware:       brcm/brcmfmac43242a.bin
firmware:       brcm/brcmfmac43236b.bin
firmware:       brcm/brcmfmac43143.bin
firmware:       brcm/brcmfmac4358-pcie.txt
firmware:       brcm/brcmfmac4358-pcie.bin
firmware:       brcm/brcmfmac43570-pcie.txt
firmware:       brcm/brcmfmac43570-pcie.bin
firmware:       brcm/brcmfmac4356-pcie.txt
firmware:       brcm/brcmfmac4356-pcie.bin
firmware:       brcm/brcmfmac43602-pcie.txt
firmware:       brcm/brcmfmac43602-pcie.bin
srcversion:     7508E18033F45FEE691BC89
alias:          usb:v0A5Cp0BDCd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0A5CpBD27d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0A5CpBD1Fd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0A5CpBD17d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0A5CpBD1Ed*dc*dsc*dp*ic*isc*ip*in*
alias:          pci:v000014E4d0000AA52sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BCsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BBsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043BAsv*sd*bc02sc80i*
alias:          pci:v000014E4d000043E9sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043D9sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043D3sv*sd*bc02sc80i*
alias:          pci:v000014E4d000043ECsv*sd*bc02sc80i*
alias:          sdio:c*v02D0d4354*
alias:          sdio:c*v02D0d4345*
alias:          sdio:c*v02D0dA9A6*
alias:          sdio:c*v02D0d4335*
alias:          sdio:c*v02D0dA962*
alias:          sdio:c*v02D0dA94D*
alias:          sdio:c*v02D0dA94C*
alias:          sdio:c*v02D0d4334*
alias:          sdio:c*v02D0d4330*
alias:          sdio:c*v02D0d4329*
alias:          sdio:c*v02D0d4324*
alias:          sdio:c*v02D0dA887*
depends:        brcmutil,cfg80211
intree:         Y
vermagic:       4.2.0-16-generic SMP mod_unload modversions
signer:         Build time autogenerated kernel key
sig_key:        6A:1C:9C:21:F0:4A:B8:6F:D1:D7:CE:D6:CA:11:35:40:FC:8E:35:B6
sig_hashalgo:   sha512
parm:           txglomsz:maximum tx packet chain size [SDIO] (int)
parm:           firmware_path:string
parm:           debug:level of debug output (int)
parm:           fcmode:mode of firmware signalled flow control (int)
parm:           roamoff:do not use internal roaming engine (int)

filename:       /lib/modules/4.2.0-16-generic/kernel/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
license:        Dual BSD/GPL
description:    Broadcom 802.11n wireless LAN driver utilities.
author:         Broadcom Corporation
srcversion:     AE9B4BBC6D82855B9265054
depends:       
intree:         Y
vermagic:       4.2.0-16-generic SMP mod_unload modversions
signer:         Build time autogenerated kernel key
sig_key:        6A:1C:9C:21:F0:4A:B8:6F:D1:D7:CE:D6:CA:11:35:40:FC:8E:35:B6
sig_hashalgo:   sha512

filename:       /lib/modules/4.2.0-16-generic/kernel/net/wireless/cfg80211.ko
alias:          net-pf-16-proto-16-family-nl80211
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     1F1A25B2E9C847110BD9ED9
depends:       
intree:         Y
vermagic:       4.2.0-16-generic SMP mod_unload modversions
signer:         Build time autogenerated kernel key
sig_key:        6A:1C:9C:21:F0:4A:B8:6F:D1:D7:CE:D6:CA:11:35:40:FC:8E:35:B6
sig_hashalgo:   sha512
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)


Regulatory Domain
Code:

[   13.159191] cfg80211: World regulatory domain updated:
[   13.159194] cfg80211:  DFS Master region: unset
[   13.159195] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.159197] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.159199] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.159200] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.159201] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.159203] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.159204] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.159205] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.159206] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

country 00: DFS-UNSET
   (2402 - 2472 @ 40), (N/A, 20), (N/A)
   (2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
   (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
   (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
   (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
   (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
   (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
   (57240 - 63720 @ 2160), (N/A, 0), (N/A)
Back to top
View user's profile Send private message
esayem
n00b
n00b


Joined: 29 Nov 2015
Posts: 3

PostPosted: Fri Dec 04, 2015 6:30 am    Post subject: Reply with quote

I found the upstream bug: https://bugzilla.kernel.org/show_bug.cgi?id=100201

The developer from Broadcom released some fixes for the driver, which are included in the latest gentoo-sources (4.3.0). He also updated the firmware, but the new firmware hasn't made its way into sys-kernel/linux-firmware yet, which is why I had trouble.

Those troubles went away when I started using the latest firmware from here: https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/brcm
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum