Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
X fails to start HP Laptop DV6T-6c00 intel HD Graph [SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Tue Nov 24, 2015 12:17 pm    Post subject: X fails to start HP Laptop DV6T-6c00 intel HD Graph [SOLVED] Reply with quote

Hello guys, I am once again in need of your wisdom.
I cannot get X started, I have been trying to figure this problem out for a while with no success.

X fails to start HP Laptop DV6T-6c00 intel HD Graphics 3000

I have a good clean running install of gentoo with no errors, I however cannot get X to run,
I have compiled the kernel manually and using genkernel a few times and still same result X will not start.
I see errors but I'm not sure which are pertinent.
I may not be able to see the forest, please help.
Thank you in advance.




uname -a
Code:
Linux dv6gn2 4.1.12-gentoo #1 SMP Sat Nov 7 21:18:50 PST 2015 x86_64 Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz GenuineIntel GNU/Linux






lspci -v | grep Kernel | sort -u
Code:
        Kernel driver in use: ahci
        Kernel driver in use: ehci-pci
        Kernel driver in use: i915
        Kernel driver in use: iwlwifi
        Kernel driver in use: pcieport
        Kernel driver in use: r8169
        Kernel driver in use: snd_hda_intel
        Kernel driver in use: xhci_hcd
        Kernel modules: ahci
        Kernel modules: ehci_pci
        Kernel modules: i2c_i801
        Kernel modules: iwlwifi
        Kernel modules: r8169
        Kernel modules: snd_hda_intel
        Kernel modules: xhci_pci






startx
Code:
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
Current Operating System: Linux dv6gn2 4.1.12-gentoo #1 SMP Sat Nov 7 21:18:50 PST 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.1.12-gentoo root=UUID=a97ae4f6-9097-415e-b282-53949e4bb949 ro acpi_backlight=vendor acpi_osi=Linux
Build Date: 29 September 2015  08:52:44AM
 
Current version of pixman: 0.32.8
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Mon Nov 23 19:57:11 2015
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.






/etc/init.d/xdm start
Code:
modulesmodules=�klkvm:: command not foundkd�kuq
: command not found.d/modules: line 29: �kd�kuq
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
modulesmodules=�klkvm:: command not foundkd�kuq
: command not found.d/modules: line 29: �kd�kuq
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
 * Setting up xdm ...




/var/log/kdm.log
Code:

(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.





Xorg.0.log
Code:
[ 96750.568]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 96750.570] X Protocol Version 11, Revision 0
[ 96750.571] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
[ 96750.571] Current Operating System: Linux dv6gn2 4.1.12-gentoo #1 SMP Sat Nov 7 21:18:50 PST 2015 x86_64
[ 96750.571] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.1.12-gentoo root=UUID=a97ae4f6-9097-415e-b282-53949e4bb949 ro acpi_backlight=vendor acpi_osi=Linux
[ 96750.573] Build Date: 29 September 2015  08:52:44AM
[ 96750.574]
[ 96750.574] Current version of pixman: 0.32.8
[ 96750.576]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[ 96750.576] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 96750.579] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 23 19:07:33 2015
[ 96750.584] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 96750.616] (==) No Layout section.  Using the first Screen section.
[ 96750.616] (==) No screen section available. Using defaults.
[ 96750.616] (**) |-->Screen "Default Screen Section" (0)
[ 96750.616] (**) |   |-->Monitor "<default monitor>"
[ 96750.617] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[ 96750.617] (==) Automatically adding devices
[ 96750.617] (==) Automatically enabling devices
[ 96750.617] (==) Automatically adding GPU devices
[ 96750.691] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/OTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[ 96750.691] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 96750.691] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 96750.691] (II) Loader magic: 0x805c80
[ 96750.691] (II) Module ABI versions:
[ 96750.691]    X.Org ANSI C Emulation: 0.4
[ 96750.691]    X.Org Video Driver: 18.0
[ 96750.691]    X.Org XInput driver : 21.0
[ 96750.691]    X.Org Server Extension : 8.0
[ 96750.692] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 96750.693] (--) PCI:*(0:0:2:0) 8086:0116:103c:1658 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[ 96750.694] (II) LoadModule: "glx"
[ 96750.706] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 96750.854] (II) Module glx: vendor="X.Org Foundation"
[ 96750.854]    compiled for 1.16.4, module version = 1.0.0
[ 96750.854]    ABI class: X.Org Server Extension, version 8.0
[ 96750.854] (==) AIGLX enabled
[ 96750.854] (==) Matched intel as autoconfigured driver 0
[ 96750.854] (==) Matched intel as autoconfigured driver 1
[ 96750.854] (==) Matched modesetting as autoconfigured driver 2
[ 96750.854] (==) Matched fbdev as autoconfigured driver 3
[ 96750.854] (==) Matched vesa as autoconfigured driver 4
[ 96750.855] (==) Assigned the driver to the xf86ConfigLayout
[ 96750.855] (II) LoadModule: "intel"
[ 96750.861] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 96750.889] (II) Module intel: vendor="X.Org Foundation"
[ 96750.889]    compiled for 1.16.4, module version = 2.99.917
[ 96750.889]    Module class: X.Org Video Driver
[ 96750.889]    ABI class: X.Org Video Driver, version 18.0
[ 96750.889] (II) LoadModule: "modesetting"
[ 96750.908] (WW) Warning, couldn't open module modesetting
[ 96750.908] (II) UnloadModule: "modesetting"
[ 96750.908] (II) Unloading modesetting
[ 96750.908] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 96750.908] (II) LoadModule: "fbdev"
[ 96750.908] (WW) Warning, couldn't open module fbdev
[ 96750.908] (II) UnloadModule: "fbdev"
[ 96750.908] (II) Unloading fbdev
[ 96750.908] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 96750.908] (II) LoadModule: "vesa"
[ 96750.909] (WW) Warning, couldn't open module vesa
[ 96750.909] (II) UnloadModule: "vesa"
[ 96750.909] (II) Unloading vesa
[ 96750.909] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 96750.909] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 96750.909] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 96750.909] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 96750.909] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 96750.909] (--) using VT number 7

[ 96750.920] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[ 96750.925] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 96750.925] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 96750.925] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[ 96750.925] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 96750.925] (==) intel(0): RGB weight 888
[ 96750.925] (==) intel(0): Default visual is TrueColor
[ 96750.925] (II) intel(0): Output LVDS1 has no monitor section
[ 96750.925] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 96750.925] (II) intel(0): Enabled output LVDS1
[ 96750.925] (II) intel(0): Output VGA1 has no monitor section
[ 96750.925] (II) intel(0): Enabled output VGA1
[ 96750.925] (II) intel(0): Output HDMI1 has no monitor section
[ 96750.925] (II) intel(0): Enabled output HDMI1
[ 96750.925] (II) intel(0): Output DP1 has no monitor section






dmesg
[code][ 0.000000] BIOS-e820: [mem 0x00000000acdd8000-0x00000000ace19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ace1a000-0x00000000ace3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17FC, BIOS F.1C 01/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] 8 base 240000000 mask FF0000000 write-back
[ 0.000000] 9 base 24FE00000 mask FFFE00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01990000, 0x01990fff] PGTABLE
[ 0.000000] BRK [0x01991000, 0x01991fff] PGTABLE
[ 0.000000] BRK [0x01992000, 0x01992fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24fc00000-0x24fdfffff]
[ 0.000000] [mem 0x24fc00000-0x24fdfffff] page 2M
[ 0.000000] BRK [0x01993000, 0x01993fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x24fbfffff]
[ 0.000000] [mem 0x240000000-0x24fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01994000, 0x01994fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xacdd7fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xacbfffff] page 2M
[ 0.000000] [mem 0xacc00000-0xacdd7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xace1a000-0xace3efff]
[ 0.000000] [mem 0xace1a000-0xace3efff] page 4k
[ 0.000000] BRK [0x01995000, 0x01995fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xacfff000-0xacffffff]
[ 0.000000] [mem 0xacfff000-0xacffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3791e000-0x37c86fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000ACFFE120 00008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000ACFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x00000000ACFEB000 00DB7F (v01 HP INSYDE 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040
[ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040
[ 0.000000] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 0x00000000ACFFB000 000038 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0x00000000ACFFA000 00008C (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000ACFF9000 00003C (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0x00000000ACFEA000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000ACFE9000 00051F (v01 HP INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 0x00000000ACFE7000 000028 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 0x00000000ACFE4000 000034 (v07 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000ACFE3000 0007C2 (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 0x00000000ACFE2000 000996 (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 0x00000000ACFE1000 0002DA (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 0x00000000ACFE0000 00035D (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880247400000-ffff88024e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000024fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000acdd7fff]
[ 0.000000] node 0: [mem 0x00000000ace1a000-0x00000000ace3efff]
[ 0.000000] node 0: [mem 0x00000000acfff000-0x00000000acffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000024fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024fdfffff]
[ 0.000000] On node 0 totalpages: 2083738
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9625 pages used for memmap
[ 0.000000] DMA32 zone: 703998 pages, LIFO batch:31
[ 0.000000] Normal zone: 18809 pages used for memmap
[ 0.000000] Normal zone: 1375744 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacdd8000-0xace19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xace3f000-0xacebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88024fa00000 s88600 r8192 d30184 u262144
[ 0.000000] pcpu-alloc: s88600 r8192 d30184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055092
[ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.1.12-gentoo root=UUID=a97ae4f6-9097-415e-b282-53949e4bb949 ro acpi_backlight=vendor acpi_osi=Linux
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 21108(64%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8124684K/8334952K available (5724K kernel code, 399K rwdata, 1948K rodata, 860K init, 812K bss, 210268K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:4352 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.635 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.27 BogoMIPS (lpj=23946350)
[ 0.000119] pid_max: default: 32768 minimum: 301
[ 0.000180] ACPI: Core revision 20150410
[ 0.010463] ACPI: All ACPI Tables successfully acquired
[ 0.010639] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010700] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010983] CPU: Physical Processor ID: 0
[ 0.011037] CPU: Processor Core ID: 0
[ 0.011094] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011152] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011213] mce: CPU supports 7 MCE banks
[ 0.011275] CPU0: Thermal monitoring handled by SMI
[ 0.011280] process: using mwait in idle threads
[ 0.011337] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.011394] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.011922] Freeing SMP alternatives memory: 24K (ffffffff818bd000 - ffffffff818c3000)
[ 0.025284] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125440] TSC deadline timer enabled
[ 0.125443] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.125648] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.125937] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.125999] ... version: 3
[ 0.126054] ... bit width: 48
[ 0.126109] ... generic registers: 4
[ 0.126164] ... value mask: 0000ffffffffffff
[ 0.126222] ... max period: 0000ffffffffffff
[ 0.126279] ... fixed-purpose events: 3
[ 0.126334] ... event mask: 000000070000000f
[ 0.126632] x86: Booting SMP configuration:
[ 0.126688] .... node #0, CPUs: #1
[ 0.137962] CPU1: Thermal monitoring handled by SMI
[ 0.140116] #2
[ 0.151357] CPU2: Thermal monitoring handled by SMI
[ 0.164663] #3
[ 0.164663] CPU3: Thermal monitoring handled by SMI
[ 0.166765] x86: Booted up 1 node, 4 CPUs
[ 0.166874] smpboot: Total of 4 processors activated (19157.08 BogoMIPS)
[ 0.169693] devtmpfs: initialized
[ 0.170011] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
[ 0.170186] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.170453] NET: Registered protocol family 16
[ 0.196803] cpuidle: using governor ladder
[ 0.223528] cpuidle: using governor menu
[ 0.223702] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.223764] ACPI: bus type PCI registered
[ 0.223911] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.223988] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.224229] PCI: Using configuration type 1 for base access
[ 0.224427] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.253890] ACPI: Added _OSI(Module Device)
[ 0.253947] ACPI: Added _OSI(Processor Device)
[ 0.254003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.254060] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254117] ACPI: Added _OSI(Linux)
[ 0.256794] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.260342] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.260782] ACPI: Dynamic OEM Table Load:
[ 0.260925] ACPI: SSDT 0xFFFF88024EB2B000 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.261638] ACPI: Dynamic OEM Table Load:
[ 0.261778] ACPI: SSDT 0xFFFF88024EB47400 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.262421] ACPI: Dynamic OEM Table Load:
[ 0.262560] ACPI: SSDT 0xFFFF88024EB1B400 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.263578] ACPI : EC: EC started
[ 0.266855] ACPI: Interpreter enabled
[ 0.266931] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.267087] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.267252] ACPI: (supports S0 S3 S4 S5)
[ 0.267307] ACPI: Using IOAPIC for interrupt routing
[ 0.267393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.276471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.276533] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.276628] \_SB_.PCI0:_OSC invalid UUID
[ 0.276629] _OSC request data:1 1f 0
[ 0.276633] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.276987] PCI host bridge to bus 0000:00
[ 0.277043] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.277102] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.277163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.277223] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.277285] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[ 0.277352] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.277446] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.277455] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.277461] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.277465] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.277577] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.277599] pci 0000:00:16.0: reg 0x10: [mem 0xc6504000-0xc650400f 64bit]
[ 0.277671] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.277764] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.278084] pci 0000:00:1a.0: reg 0x10: [mem 0xc650a000-0xc650a3ff]
[ 0.279901] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.279959] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.280068] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.280086] pci 0000:00:1b.0: reg 0x10: [mem 0xc6500000-0xc6503fff 64bit]
[ 0.280156] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280198] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.280306] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.280379] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.280423] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.280531] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.280601] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.280645] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.280751] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.280822] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.280865] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.280971] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.281042] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.281085] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.281194] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.281505] pci 0000:00:1d.0: reg 0x10: [mem 0xc6509000-0xc65093ff]
[ 0.283318] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.283374] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.283482] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.283658] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.283674] pci 0000:00:1f.2: reg 0x10: [io 0x5098-0x509f]
[ 0.283682] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
[ 0.283690] pci 0000:00:1f.2: reg 0x18: [io 0x5090-0x5097]
[ 0.283698] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
[ 0.283706] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.283715] pci 0000:00:1f.2: reg 0x24: [mem 0xc6508000-0xc65087ff]
[ 0.283751] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.283834] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.283850] pci 0000:00:1f.3: reg 0x10: [mem 0xc6506000-0xc65060ff 64bit]
[ 0.283871] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 0.284027] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.284051] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.284085] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.284107] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.284202] pci 0000:01:00.0: supports D1 D2
[ 0.284203] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285859] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.297000] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[ 0.297086] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.297095] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.297112] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.297297] pci 0000:07:00.0: [8086:008b] type 00 class 0x028000
[ 0.297459] pci 0000:07:00.0: reg 0x10: [mem 0xc4500000-0xc4501fff 64bit]
[ 0.298073] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.298168] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.317141] pci 0000:00:1c.1: PCI bridge to [bus 07-0c]
[ 0.317201] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.317205] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.317212] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.317282] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.317307] pci 0000:0d:00.0: reg 0x10: [mem 0xc3501000-0xc3501fff]
[ 0.317389] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.317455] pci 0000:0d:00.0: supports D1 D2
[ 0.317456] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot
[ 0.317483] pci 0000:0d:00.0: System wakeup disabled by ACPI
[ 0.317599] pci 0000:0d:00.1: [10ec:5209] type 00 class 0x080500
[ 0.317624] pci 0000:0d:00.1: reg 0x10: [mem 0xc3500000-0xc35000ff]
[ 0.317767] pci 0000:0d:00.1: supports D1 D2
[ 0.317769] pci 0000:0d:00.1: PME# supported from D1 D2 D3hot
[ 0.337056] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[ 0.337144] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.337159] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.337165] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.337342] pci 0000:13:00.0: [1b73:1009] type 00 class 0x0c0330
[ 0.337419] pci 0000:13:00.0: reg 0x10: [mem 0xc3400000-0xc340ffff 64bit]
[ 0.337475] pci 0000:13:00.0: reg 0x18: [mem 0xc3410000-0xc3410fff 64bit]
[ 0.337530] pci 0000:13:00.0: reg 0x20: [mem 0xc3411000-0xc3411fff 64bit]
[ 0.337731] pci 0000:13:00.0: supports D1
[ 0.337733] pci 0000:13:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.337781] pci 0000:13:00.0: System wakeup disabled by ACPI
[ 0.357157] pci 0000:00:1c.3: PCI bridge to [bus 13]
[ 0.357230] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.357378] pci_bus 0000:00: on NUMA node 0
[ 0.357839] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.358458] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 0.359037] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 0.359613] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.360188] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.360845] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.361428] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.362004] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.364280] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.364448] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.364580] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.364639] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.364701] vgaarb: loaded
[ 0.364754] vgaarb: bridge control possible 0000:00:02.0
[ 0.364884] SCSI subsystem initialized
[ 0.365025] PCI: Using ACPI for IRQ routing
[ 0.373178] PCI: pci_cache_line_size set to 64 bytes
[ 0.373438] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.373440] e820: reserve RAM buffer [mem 0xacdd8000-0xafffffff]
[ 0.373441] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
[ 0.373443] e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
[ 0.373444] e820: reserve RAM buffer [mem 0x24fe00000-0x24fffffff]
[ 0.373640] Switched to clocksource hpet
[ 0.375919] pnp: PnP ACPI init
[ 0.376089] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.376150] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.376209] system 00:00: [io 0x1010-0x1013] has been reserved
[ 0.376270] system 00:00: [io 0xffff] has been reserved
[ 0.376328] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.376389] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.376449] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.376508] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.376569] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376601] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.376647] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.376708] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.376760] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.376808] pnp 00:04: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.376940] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.377011] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.377074] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.377133] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.377194] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.377254] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.377315] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.377375] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.377436] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.377498] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.377559] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378801] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.378863] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.378925] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.378939] pnp: PnP ACPI: found 7 devices
[ 0.383544] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.383623] pci 0000:0d:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.383744] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[ 0.383803] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.383866] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.383928] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.383994] pci 0000:00:1c.1: PCI bridge to [bus 07-0c]
[ 0.384052] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.384115] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.384177] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.384245] pci 0000:0d:00.0: BAR 6: assigned [mem 0xc3510000-0xc351ffff pref]
[ 0.384307] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[ 0.384365] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.384427] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.384490] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.384556] pci 0000:00:1c.3: PCI bridge to [bus 13]
[ 0.384616] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.384683] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.384684] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.384686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.384688] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[ 0.384689] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.384691] pci_bus 0000:01: resource 1 [mem 0xc5500000-0xc64fffff]
[ 0.384692] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.384694] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
[ 0.384695] pci_bus 0000:07: resource 1 [mem 0xc4500000-0xc54fffff]
[ 0.384697] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.384698] pci_bus 0000:0d: resource 0 [io 0x2000-0x2fff]
[ 0.384700] pci_bus 0000:0d: resource 1 [mem 0xc3500000-0xc44fffff]
[ 0.384701] pci_bus 0000:0d: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.384703] pci_bus 0000:13: resource 1 [mem 0xc3400000-0xc34fffff]
[ 0.384759] NET: Registered protocol family 2
[ 0.384997] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.385155] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.385346] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.385431] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.385514] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.385669] NET: Registered protocol family 1
[ 0.385739] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.425579] PCI: CLS 64 bytes, default 64
[ 0.425629] Trying to unpack rootfs image as initramfs...
[ 0.830115] Freeing initrd memory: 3492K (ffff88003791e000 - ffff880037c87000)
[ 0.830188] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.830248] software IO TLB [mem 0xa8dd8000-0xacdd8000] (64MB) mapped at [ffff8800a8dd8000-ffff8800acdd7fff]
[ 0.830372] Simple Boot Flag at 0x44 set to 0x1
[ 0.830459] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.830533] hw unit of domain pp0-core 2^-16 Joules
[ 0.830590] hw unit of domain package 2^-16 Joules
[ 0.830646] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.831106] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.831202] audit: initializing netlink subsys (disabled)
[ 0.831274] audit: type=2000 audit(1448237703.820:1): initialized
[ 0.831686] VFS: Disk quotas dquot_6.6.0
[ 0.831764] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.831974] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.832081] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.832349] ocfs2: Registered cluster interface o2cb
[ 0.832438] OCFS2 User DLM kernel interface loaded
[ 0.832756] gfs2: GFS2 installed
[ 0.833026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.833089] io scheduler noop registered
[ 0.833145] io scheduler deadline registered
[ 0.833210] io scheduler cfq registered (default)
[ 0.833806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.834302] Linux agpgart interface v0.103
[ 0.834459] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[ 0.835382] ACPI: Lid Switch [LID]
[ 0.835526] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.835591] ACPI: Power Button [PWRB]
[ 0.835695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.835756] ACPI: Power Button [PWRF]
[ 0.835839] [drm] Initialized drm 1.1.0 20060810
[ 0.836329] [drm] Memory usable by graphics device = 2048M
[ 0.836388] [drm] Replacing VGA console driver
[ 0.836963] Console: switching to colour dummy device 80x25
[ 0.843555] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.843567] [drm] Driver supports precise vblank timestamp query.
[ 0.843684] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.863805] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.863992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.864021] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[ 0.866010] brd: module loaded
[ 0.866976] loop: module loaded
[ 0.867059] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.875443] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.875450] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.875569] mousedev: PS/2 mouse device common for all mice
[ 0.875788] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.875871] NET: Registered protocol family 17
[ 0.876203] registered taskstats version 1
[ 0.876700] hctosys: unable to open rtc device (rtc0)
[ 0.880338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.945019] fbcon: inteldrmfb (fb0) is primary device
[ 1.708061] Console: switching to colour frame buffer device 160x48
[ 1.711478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.711505] i915 0000:00:02.0: registered panic notifier
[ 1.735058] Freeing unused kernel memory: 860K (ffffffff817e6000 - ffffffff818bd000)
[ 1.738853] psmouse serio1: synaptics: queried max coordinates: x [..5756], y [..4868]
[ 1.809763] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294
[ 1.821135] libata version 3.00 loaded.
[ 1.824891] tsc: Refined TSC clocksource calibration: 2394.556 MHz
[ 1.824895] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x228420730f3, max_idle_ns: 440795202126 ns
[ 1.854800] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 1.931861] ahci 0000:00:1f.2: version 3.0
[ 1.945047] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 1.945056] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.966129] scsi host0: ahci
[ 1.966250] scsi host1: ahci
[ 1.966394] scsi host2: ahci
[ 1.966540] scsi host3: ahci
[ 1.966657] scsi host4: ahci
[ 1.966839] scsi host5: ahci
[ 1.966905] ata1: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508100 irq 25
[ 1.966906] ata2: DUMMY
[ 1.966907] ata3: DUMMY
[ 1.966908] ata4: DUMMY
[ 1.966909] ata5: DUMMY
[ 1.966913] ata6: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508380 irq 25
[ 2.315348] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.315850] ata6.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
[ 2.316827] ata6.00: configured for UDMA/100
[ 2.335353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.345640] ata1.00: ATA-8: ST9750420AS, 0003HPM1, max UDMA/133
[ 2.345645] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.346526] ata1.00: configured for UDMA/133
[ 2.346684] scsi 0:0:0:0: Direct-Access ATA ST9750420AS HPM1 PQ: 0 ANSI: 5
[ 2.346894] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.346897] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.347070] sd 0:0:0:0: [sda] Write Protect is off
[ 2.347074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.347112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.358107] scsi 5:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
[ 2.380790] sr 5:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.380796] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.381014] sr 5:0:0:0: Attached scsi CD-R


Last edited by Phredus on Sun Dec 20, 2015 4:18 am; edited 6 times in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7550
Location: Goose Creek SC

PostPosted: Tue Nov 24, 2015 4:54 pm    Post subject: Reply with quote

suggest emerge twm xterm xclock and then run startx . If you get three windows and a movable mouse pointer X is working but your window manager/display manager/desktop is not. enter exit in the left window to return to CLI
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Tue Nov 24, 2015 9:35 pm    Post subject: Reply with quote

DONAHUE wrote:
suggest emerge twm xterm xclock and then run startx . If you get three windows and a movable mouse pointer X is working but your window manager/display manager/desktop is not. enter exit in the left window to return to CLI

I emerged twm xterm xclock and then run startx to satisfy your test however, it worked as you said. I still cannot start X and see a kde desktop. I dont think my intel Graphics 3000 Driver or module are loading.
I am braindead here, what should I do next?

Thank you

Here is the output from startx
Code:
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
Current Operating System: Linux dv6gn2 4.1.12-gentoo #1 SMP Sat Nov 7 21:18:50 PST 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.1.12-gentoo root=UUID=a97ae4f6-9097-415e-b282-53949e4bb949 ro acpi_backlight=vendor acpi_osi=Linux
Build Date: 29 September 2015  08:52:44AM
 
Current version of pixman: 0.32.8
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Tue Nov 24 05:30:44 2015
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xinit: connection to X server lost

waiting for X server to shut down XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":1"
      after 1045 requests (1045 known processed) with 1 events remaining.
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":1"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":1"
(EE) Server terminated successfully (0). Closing log file.



These are the errors in
/var/log/Xorg.0.log
Code:
[   697.594] (WW) Warning, couldn't open module modesetting
[   697.594] (WW) Warning, couldn't open module fbdev
[   697.594] (WW) Warning, couldn't open module vesa
[   697.595] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[   697.595] (WW) xf86OpenConsole: setsid failed: Operation not permitted

I dont know where to go to start trubleshooting, I googled the errors and found a couple of references about nvidia. I have intel Graphics 3000.
Back to top
View user's profile Send private message
russK
l33t
l33t


Joined: 27 Jun 2006
Posts: 618

PostPosted: Wed Nov 25, 2015 12:54 am    Post subject: Reply with quote

A few things to check.

Your 2nd attempt does not look right, it's talking about Xorg.1.log, display :1. Are you looking at the right log?

I'm used to using configuration files under /etc/X11. Not sure why it is looking under /use/share.

Maybe make sure your .xinitrc file is what you expect and check your arguments.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7550
Location: Goose Creek SC

PostPosted: Wed Nov 25, 2015 1:06 am    Post subject: Reply with quote

kde desktop is the item that is not loading

run ls /etc/X11/Sessions
There should be a reference to some kind of kde,
run nano /etc/env.d/90xsession
edit to XSESSION="the exact reference to some kind of kde you found above"
run nano /etc/conf.d/xdm
Should say DISPLAYMANAGER="kdm"
See https://wiki.gentoo.org/wiki/KDE/Troubleshooting#KDM_fails_to_start

Assuming you are using openrc not systemd and installed kde using https://wiki.gentoo.org/wiki/KDE

xinitrc may well be the problem source; found at : /etc/X11/xinit/xinitrc
/etc/X11/xinit/xinitrc.d
/etc/X11/xinit/xinitrc.d/00-xhost
/etc/X11/xinit/xinitrc.d/40-libcanberra-gtk-module
/etc/X11/xinit/xinitrc.d/50-systemd-user.sh
/etc/X11/xinit/xinitrc.d/80-dbus
/etc/X11/xinit/xinitrc.d/90-consolekit
/etc/xdg/xfce4/xinitrc
/home/<your user names>/.xinitrc

run kdm as root and as user instead of startx; what happens?
_________________
Defund the FCC.


Last edited by DONAHUE on Wed Nov 25, 2015 1:42 am; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7550
Location: Goose Creek SC

PostPosted: Wed Nov 25, 2015 1:40 am    Post subject: Reply with quote

IMHO xorg configuration is not the problem, the following extracts from man xorg may help explain the xorg questions raised above:

Configuration

Xorg typically uses a configuration file called xorg.conf and configuration files with the suffix .conf in a directory called xorg.conf.d for its initial setup. Refer to the xorg.conf(5) manual page for information about the format of this file.
Xorg has a mechanism for automatically generating a built-in configuration at run-time when no xorg.conf file or xorg.conf.d files are present. The current version of this automatic configuration mechanism works in two ways.

The first is via enhancements that have made many components of the xorg.conf file optional. This means that information that can be probed or reasonably deduced doesn't need to be specified explicitly, greatly reducing the amount of built-in configuration information that needs to be generated at run-time.

The second is to have "safe" fallbacks for most configuration information. This maximises the likelihood that the Xorg server will start up in some usable configuration even when information about the specific hardware is not available.

The automatic configuration support for Xorg is work in progress. It is currently aimed at the most popular hardware and software platforms supported by Xorg. Enhancements are planned for future releases.

Files

The Xorg server config files can be found in a range of locations. These are documented fully in the xorg.conf(5) manual page. The most commonly used locations are shown here.
/etc/X11/xorg.conf
Server configuration file.
/etc/X11/xorg.conf-4
Server configuration file.
/etc/xorg.conf
Server configuration file.
/usr/etc/xorg.conf
Server configuration file.
/usr/lib/X11/xorg.conf
Server configuration file.
/etc/X11/xorg.conf.d
Server configuration directory.
/etc/X11/xorg.conf.d-4
Server configuration directory.
/etc/xorg.conf.d
Server configuration directory.
/usr/etc/xorg.conf.d
Server configuration directory.
/usr/lib/X11/xorg.conf.d
Server configuration directory.
/var/log/Xorg.n.log
Server log file for display n.
/usr/bin/*
Client binaries.
/usr/include/*
Header files.
/usr/lib/*
Libraries.
/usr/share/fonts/X11/*
Fonts.
/usr/share/X11/XErrorDB
Client error message database.
/usr/lib/X11/app-defaults/*
Client resource specifications.
/usr/share/man/man?/*
Manual pages.
/etc/Xn.hosts
Initial access control list for display n.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Wed Nov 25, 2015 4:09 am    Post subject: @DONAHUE return for xdm as root Reply with quote

Running as root ------>>> Those funny characters look mighty suspicious to me.
Code:
/etc/init.d/xdm start
modulesmodules=�klkvm:: command not foundkd�kuq
: command not found.d/modules: line 29: �kd�kuq
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
 * Setting up xdm ...   


xdm log /var/log/kdm.log
Code:
********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************

(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Wed Nov 25, 2015 4:49 am    Post subject: @russK Thank you for your attention Reply with quote

Quote:
Your 2nd attempt does not look right, it's talking about Xorg.1.log, display :1. Are you looking at the right log?

I deleted all Xorg logs and ran startx again | It did not create an X0rg.0.log, it now created Xorg.1.log. Here is the ouput (only Errors for brevety):
Code:
[ 23629.198] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 23629.199] (--) PCI:*(0:0:2:0) 8086:0116:103c:1658 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ 23629.198] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23629.198] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 23629.199] (--) PCI:*(0:0:2:0) 8086:0116:103c:1658 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ 23629.200] (II) LoadModule: "modesetting"
[ 23629.200] (WW) Warning, couldn't open module modesetting
[ 23629.200] (II) UnloadModule: "modesetting"
[ 23629.200] (II) Unloading modesetting
[ 23629.200] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 23629.200] (II) LoadModule: "fbdev"
[ 23629.200] (WW) Warning, couldn't open module fbdev
[ 23629.200] (II) UnloadModule: "fbdev"
[ 23629.200] (II) Unloading fbdev
[ 23629.200] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23629.200] (II) LoadModule: "vesa"
[ 23629.200] (WW) Warning, couldn't open module vesa
[ 23629.200] (II) UnloadModule: "vesa"
[ 23629.200] (II) Unloading vesa
[ 23629.201] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 23629.201] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 23629.201] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 23629.201] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 23629.201] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 23629.201] (--) using VT number 8
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ 23629.750] (EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 23629.750] (EE) AIGLX: reverting to software rendering
[ 23629.756] (II) AIGLX: Loaded and initialized swrast
[ 23629.756] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 23629.758] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 23629.774] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------



Quote:
I'm used to using configuration files under /etc/X11. Not sure why it is looking under /use/share.
Maybe make sure your .xinitrc file is what you expect and check your arguments.

I did not configure .xinitrc, I've never before had to configure .xinitrc on any of my systems. I did a search and found:
Code:
locate .xinitrc
/home/edadmin/.xinitrc.template                                                                                     
/home/phredus/.xinitrc.template
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 42580
Location: 56N 3W

PostPosted: Wed Nov 25, 2015 6:57 pm    Post subject: Reply with quote

Phredus,

Since you can get twm, three xterms and a clock running, which is Xorg using the default xintrc, we can be sure that Xorg works.
You may be able to make it work better but thats for later after it runs the desktop you want.

With
Code:
[ 23629.198] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
you will have no hardware acceleration.
This does not stop Xorg from working but some desktop environments won't run without it.
Code:
[ 23629.750] (EE) AIGLX: reverting to software rendering


This may be a bug in xf86-video-intel which has been fixed in the testing driver.
Code:
$ eix xf86-video-intel
* x11-drivers/xf86-video-intel
     Available versions:  ~*2.9.1 2.19.0 2.20.13 2.21.15 (~)2.99.903 (~)2.99.905-r1 (~)2.99.906 (~)2.99.907-r1 (~)2.99.909 (~)2.99.910 (~)2.99.914 (~)2.99.916 2.99.917 (~)2.99.917-r1 (~)2.99.917-r2 {debug dri glamor (+)sna +udev uxa xvmc}
     Homepage:            http://xorg.freedesktop.org/
     Description:         X.Org driver for Intel cards


Keyword x11-drivers/xf86-video-intel then
Code:
emerge -1av xf86-video-intel

Be sure you are upgrading to version 2.99.917-r2.
Test again.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Thu Nov 26, 2015 12:19 pm    Post subject: Success Got kdm working, got X and kde is up and running Reply with quote

Thank you guys, I'm in, Xorg is running, xdm is running and kde is running, but I dont know what made it work, here is what I did so far.

I changed /etc/conf.d/xdm from DISPLAYMANAGER="kdm" to DISPLAYMANAGER="xdm". (I did this back and forth a few times in the past with no success). But its working now.

    # /etc/init.d/xdm start

Code:
# /etc/init.d/xdm start
 * Caching service dependencies ...
/etc/init.d/../conf.d/modules: line 28: $'\200kd\200ku\E:q\r\E:q\rmodulesmodules=\200klkvm:': command not found
/etc/init.d/../conf.d/modules: line 29: $'\200kd\200ku\E:q\r': command not found                              [ ok ]
modulesmodules=�klkvm:: command not foundkd�kuq
: command not found.d/modules: line 29: �kd�kuq
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
 * Setting up kdm ...


    Just in case it means something: startkde does not work:

Code:
$ startkde
$DISPLAY is not set or cannot connect to the X server.


    Also startx does not work:

Code:
$ startx                                                                                                                                                                                     
xauth:  file /home/phredus/.serverauth.3739 does not exist                                                                                                                                                     
                                                                                                                                                                                                               
                                                                                                                                                                                                               
X.Org X Server 1.16.4                                                                                                                                                                                         
Release Date: 2014-12-20                                                                                                                                                                                       
X Protocol Version 11, Revision 0                                                                                                                                                                             
Build Operating System: Linux 4.1.12-gentoo x86_64 Gentoo                                                                                                                                                     
Current Operating System: Linux dv6gn2 4.1.12-gentoo #1 SMP Sat Nov 7 21:18:50 PST 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.1.12-gentoo root=UUID=a97ae4f6-9097-415e-b282-53949e4bb949 ro acpi_backlight=vendor acpi_osi=Linux
Build Date: 24 November 2015  05:43:34AM
 
Current version of pixman: 0.32.8
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 25 21:24:09 2015
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.


    I Re-Installed: x11-drivers/xf86-video-intel-2.99.917 I dont know if it is version "-r2".
    I don't think I got ACCEPT_KEYWORDS: x11-drivers/xf86-video-intel Correct, Please let me know which file it goes in.

Code:
# emerge -1av xf86-video-intel --ask
!!! INVALID ACCEPT_KEYWORDS: x11-drivers/xf86-video-intel

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] x11-drivers/xf86-video-intel-2.99.917::gentoo  USE="dri sna udev -debug -uxa -xvmc" 0 KiB

Total: 1 package (1 reinstall), Size of downloads: 0 KiB

Would you like to merge these packages? [Yes/No]



I found this in "/etc/conf.d/modules". I dont know what the stuff on the bottom of the file is but I think it may be causing some of the errors I'm getting on boot and in xdm.
Code:
# modules/3.18.12-gentoo/kernel/drivers/gpu/drm/i915/i915.ko
### modules="i915"
modules="i915"
# You can define a list modules for a specific kernel version,
# a released kernel version, a main kernel version or just a list.
# The most specific versioned variable will take precedence.
#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
#modules_2_6_23="tun ieee1394"
#modules_2_6="tun"
#modules_2="ipv6"
#modules="ohci1394"

# You can give modules a different name when they load - the new name
# will also be used to pick arguments below.
#modules="dummy:dummy1"

# Give the modules some arguments if needed, per version if necessary.
# Again, the most specific versioned variable will take precedence.
#module_ieee1394_args="debug"
#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
#module_ieee1394_args_2_6_23="debug3"
#module_ieee1394_args_2_6="debug4"
#module_ieee1394_args_2="debug5"

# You should consult your kernel documentation and configuration
# for a list of modules and their options.

<80>kd<80>ku^[:q^M^[:q^Mmodulesmodules=""<80>klkvm: disabled by bios^Mu<80>kb^[uihp-wmi <80>kb<80>kl<80>kl<80>kl<80>kl<80>kl<80>kli695 <80>kl<80>kl<80>kl<80>kl<80>kD<80>kr6<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr^[\
:wq^M<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl<80>kl\
<80>kl<80>kl<80>kl<80>kl^[^[^[^[:q^M^[^[:q!^Mdite^Mitest^[:w^M^M^[:q^MQ1<80>kb!^M:q!^M
<80>kd<80>ku^[:q^M
~
I will fix it and try again and report back. Thank you for all the help so far.

Line breaks added by NeddySeagoon
Back to top
View user's profile Send private message
Syl20
Guru
Guru


Joined: 04 Aug 2005
Posts: 550
Location: France

PostPosted: Thu Nov 26, 2015 3:12 pm    Post subject: Re: Success Got kdm working, got X and kde is up and running Reply with quote

Phredus wrote:
Re-Installed: x11-drivers/xf86-video-intel-2.99.917 I dont know if it is version "-r2".

It isn't.

Quote:
I don't think I got ACCEPT_KEYWORDS: x11-drivers/xf86-video-intel Correct, Please let me know which file it goes in.

That's not the way to install masked packages. You can set the ACCEPT_KEYWORDS variable on the emerge command line (to prevent upgrading all your system with unstable packages :P ), or edit your package.keywords file.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 42580
Location: 56N 3W

PostPosted: Thu Nov 26, 2015 6:57 pm    Post subject: Reply with quote

CneGroumF,

CneGroumF wrote:
You can set the ACCEPT_KEYWORDS variable on the emerge command line (to prevent upgrading all your system with unstable packages

Yes you can do that but portage will forget all about it and downgrade things for you next update.
Its ok if you want to --pretend to see what would happen but thats all.

Editing package.keywords is the right way to allow a testing package into a stable system.

Code:
$ startkde
does not start Xorg.

startx needs ~/.xinitrc to be setup.
Its trying to run the system default xinitrc here.

Taken together if you create ~/.xinitrc with the entry startkde (you may need more) then startx will attempt to startkde rather than the default.

Your modules file has some rubbish at the end but is otherwise syntatically correct.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Thu Nov 26, 2015 11:20 pm    Post subject: This may be pertinent, please have a look Reply with quote

Hi guys, I found the same sort of gibberish in my "/etc/conf.d/hostname" file.
Does anyone do you know what this is?
Code:

# Set to the hostname of this machine
hostname="dv6gn2"
^[:q^Mhostname<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kb<80>kbhostname="dvgn2"<80>kl<80>kl<80>kl<80>kl6<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr<80>kr^[:wq^M^[^[:wq^M^[:q!^M

I'm still working on the other items but I wanted to ask since it may be pertinent.
Thank you
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 42580
Location: 56N 3W

PostPosted: Fri Nov 27, 2015 7:36 pm    Post subject: Reply with quote

Phredus,

Its not so much what it is, its now it got there.

It looks like something horrible my have happened to your root filesystem an some time.
/etc/conf.d/hostname is something you set up and leave for the life of the install, so it not like this file is ever opened for writitng.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Sun Dec 20, 2015 4:14 am    Post subject: Solved Reply with quote

Thanks guys,

I updated the video drivers and the issue with the gibberish in the config files was only on hosts file and the make.conf, I removed it and have not seen any issues.
I ran kdm as root and got a kde login prompt, this issue is solved.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum