| View previous topic :: View next topic |
| Author |
Message |
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
 Posted: Fri Jun 26, 2015 7:57 pm Post subject: Edimax EW-7711UAn USB wireless doesn't work in Gentoo x32 |
 |
|
| I've installed gentoo-sources-4.0.5 with genkernel and it doesn't recognize the device. When i type ifconfig it shows only lo and not ra0(or a wlan0) which should be for the wireless usb device. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Sat Jun 27, 2015 9:11 am Post subject: |
|
|
staretsgraphy,
Wireless is a bit of a black art and genkernel leaves it well alone unless you help it.
You will need to choose your wireless stack and hardware modules for genkernel to build.
Tell us the line from lsusb that shows your wireless device.
As its a USB device, you are going to need firmware. Its likely that | Code: | | emerge linux-firmware |
will provide the firmware but we will know more when ve see your lsusb line.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
| Posted: Sat Jun 27, 2015 12:38 pm Post subject: |
|
|
I've installed linux-firmware. Here is the results of lsusb command:
| Code: | Bus 001 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 002: ID 7392:7710 Edimax Technology Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1a2c:0c23 China Resource Semico Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub |
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Sat Jun 27, 2015 3:20 pm Post subject: |
|
|
staretsgraphy,
Grepping the kernel sources | Code: | | linux-3.16.1-gentoo # grep -R 7711 ./ |
gives
| Code: | | ./drivers/net/wireless/rt2x00/rt2800usb.c: { USB_DEVICE(0x7392, 0x7711) }, |
So the kernel knows your device - its a ralink USB something.
The kernel menu item you need is | Code: | │ CONFIG_RT2800USB: │
│ │
│ This adds support for rt27xx/rt28xx/rt30xx wireless chipset family. │
│ Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072 │
│ │
│ When compiled as a module, this driver will be called "rt2800usb.ko". │
│ │
│ Symbol: RT2800USB [=m] │
│ Type : tristate │
│ Prompt: Ralink rt27xx/rt28xx/rt30xx (USB) support │
│ Location: │
│ -> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Wireless LAN (WLAN [=y]) │
│ -> Ralink driver support (RT2X00 [=m]) │
│ Defined at drivers/net/wireless/rt2x00/Kconfig:137 │
│ Depends on: NETDEVICES [=y] && WLAN [=y] && RT2X00 [=m] && USB [=y] │
│ Selects: RT2800_LIB [=n] && RT2X00_LIB_USB [=m] && RT2X00_LIB_FIRMWARE [=y] && \ │
│ RT2X00_LIB_CRYPTO [=y] && CRC_CCITT [=y] |
However, There are a few suboptions there and I don't know which if any, you need.
Thats your chipset driver. Now for the rest of the kernel Wifi.
| Code: | │ Symbol: WIRELESS [=y] │
│ Type : boolean │
│ Prompt: Wireless │
│ Location: │
│ (1) -> Networking support (NET [=y]) │
│ Defined at net/Kconfig:354 │
│ Depends on: NET [=y] && !S390 │
│ Selected by: WLAN [=y] && NETDEVICES [=y] && !S390 && NET [=y] |
On that menu, you need
| Code: | │ │ <*> cfg80211 - wireless configuration API │ │
│ │ [*] enable powersave by default │ │
│ │ <*> Generic IEEE 802.11 Networking Stack (mac80211) │ │
│ │ [*] Minstrel │ │
│ │ [*] Minstrel 802.11n support │ │
│ │ [ ] Minstrel 802.11ac support │ │
│ │ Default rate control algorithm (Minstrel) ---> │ │
│ │ [*] Enable LED triggers |
Start off with | Code: | | genkernel -menuconfig all |
genkernel will drop you into menuconfig, so you can make the changes.
Prompt: | Code: | | Ralink rt27xx/rt28xx/rt30xx (USB) support |
is the item you are looking for.
| Code: | │ Location: │
│ -> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Wireless LAN (WLAN [=y]) │
│ -> Ralink driver support (RT2X00 [=m]) |
tells where to find it. It will be hidden until Depends on: | Code: | | NETDEVICES [=y] && WLAN [=y] && RT2X00 [=m] && USB [=y] |
is true, so all those opitions must be on too.
You can search in menuconfig wint the / key.
After your new kernel is built and installed, reboot to test. The interface will not be ra0. udev will rename it for you.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
| Posted: Mon Jul 06, 2015 4:41 pm Post subject: |
|
|
| Can you offer some help NeddySeagoon? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Mon Jul 06, 2015 5:34 pm Post subject: |
|
|
staretsgraphy,
Can you post dmesg please?
Check the time/date in It shows the build date/time of the running kernel.
If it does not tie in with your memory of your most recent kernel build, you are not running the kernel you think you are.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
| Posted: Mon Jul 06, 2015 5:43 pm Post subject: |
|
|
Sure. https://bpaste.net/show/572f65d7aa1e
| NeddySeagoon wrote: | Check the time/date in It shows the build date/time of the running kernel.
If it does not tie in with your memory of your most recent kernel build, you are not running the kernel you think you are. |
It says 4.0.5-gentoo, it's the right one. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Mon Jul 06, 2015 5:58 pm Post subject: |
|
|
staretsgraphy,
Having both
| Code: | Bus 001 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 002: ID 7392:7710 Edimax Technology Co., Ltd |
on the same bus can be a bad thing as specification compliant power limiting will cause one (or more) device to not work.
Having said that, most systems ignore the power limit spec. Its worth testing the WiFi on a bus on its own if you can.
| dmesg: | [ 8.090074] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 8.250791] usb 1-1: New USB device found, idVendor=7392, idProduct=7710
[ 8.250797] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.250801] usb 1-1: Product: Edimax Wi-Fi
[ 8.250804] usb 1-1: Manufacturer: MediaTek
[ 8.250807] usb 1-1: SerialNumber: 1.0 |
A little later
| dmesg: | | [ 9.114809] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
is root being mounted, so /lib/modules becomes available but no module is ever auto loaded.
What happens when you do to load the module by hand?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
| Posted: Mon Jul 06, 2015 6:55 pm Post subject: |
|
|
| Unfortunately, nothing happens. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Mon Jul 06, 2015 7:34 pm Post subject: |
|
|
staretsgraphy,
Describe nothing.
modprobe silently returns to the prompt when it works, thats a good sign.
After the modprobe, do you have a new interface in
What is at the end of dmesg as a result of the modprobe?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
| Posted: Wed Jul 08, 2015 6:43 pm Post subject: |
|
|
| Code: | ifconfig -a
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 4 bytes 240 (240.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 240 (240.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Wed Jul 08, 2015 7:37 pm Post subject: |
|
|
staretsgraphy,
Do the modprobe again, then post dmesg. Maybe its totally the wrong module, or maybe its looking for firmware.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
staretsgraphy
n00b
Joined: 06 Jun 2014
Posts: 16
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54234
Location: 56N 3W
|
| Posted: Mon Jul 13, 2015 4:05 pm Post subject: |
|
|
staretsgraphy,
idVendor=7392, idProduct=7710 is supposed to be unique to the hardware in your USB device.
A few companies don't follow that standard.
This post
| Code: | > - modinfo mt7601u:
> filename: /lib/modules/4.0.3-202.fc21.x86_64/updates/mt7601u.ko
> license: GPL
> firmware: mt7601u.bin
> alias: usb:v7392p7710d*dc*dsc*dp*ic*isc*ip*in* |
says you need the driver and firmware named mt7601u.
According to Github the driver is in the mainline kernel from 4.2 on.
There are instructions on that Github page to build the out of tree driver.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
Networking & Security
