View previous topic :: View next topic |
Author |
Message |
stephan-t Tux's lil' helper
Joined: 12 May 2014 Posts: 122
|
Posted: Thu Jun 25, 2015 3:59 pm Post subject: [open]xorg-drivers cannot loaded |
|
|
Hi
I try move from disrcate graphic driver to integrated intel driver. First thing edit the VIDEO_CARDS=intel and remove nouveau driver, and mesa. After @preserved-rebuild the driver installed, i put the 20-intel.conf into xorg.conf.d
and startx with manual. Black screen after start the X, and sleep the monitor just some seconds. Same problem with global xorg.conf. Just enought and I probebly back up my latest settings. Remove Intel driver, mesa, modified the make.conf , reemerge nouveau driver and mesa. Run emerge @x11-module-rebuild and run startx. The driver loaded and X started, but mouse and keyboard not recognized. I tried same times but doesn't happen anything.
In make.conf
INPUT_DEVICES=mouse keyboard
and i running the busybox mdev.
What's the problem? |
|
Back to top |
|
|
NathanZachary Moderator
Joined: 30 Jan 2007 Posts: 2605
|
Posted: Thu Jun 25, 2015 7:12 pm Post subject: |
|
|
Have you tried running without any /etc/X11/xorg.conf to see what happens? It may yield some additional insight into your particular problem.
Cheers,
Nathan Zachary _________________ “Truth, like infinity, is to be forever approached but never reached.” --Jean Ayres (1972)
---avatar cropped from =AimanStudio--- |
|
Back to top |
|
|
Buffoon Veteran
Joined: 17 Jun 2015 Posts: 1369 Location: EU or US
|
Posted: Thu Jun 25, 2015 7:16 pm Post subject: |
|
|
He needs xorg.conf to load mouse and keyboard, only evdev loads without xorg.conf but he is not using it. |
|
Back to top |
|
|
mir3x Guru
Joined: 02 Jun 2012 Posts: 455
|
Posted: Thu Jun 25, 2015 7:51 pm Post subject: |
|
|
You should paste what "grep EE /var/log/Xorg.0.log" does.
And btw u should just use "VIDEO_CARDS=intel nouveau" - u can use 2 cards, and why u removed mesa for intel ?
And dont forget also to use "eselect opengl XXX" after switching _________________ Sent from Windows |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54210 Location: 56N 3W
|
Posted: Thu Jun 25, 2015 8:52 pm Post subject: |
|
|
stephan-t,
Lets not work through a keyhole.
Use wgetpaste to post the following
the output of emerge --info
the content of /var/log/Xorg.0.log
your /usr/src/linux/.config
your xorg.conf, if you have one.
Each of those are too big to fit into a post.
Your lspci output might be useful too. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
stephan-t Tux's lil' helper
Joined: 12 May 2014 Posts: 122
|
Posted: Sun Jul 26, 2015 6:31 pm Post subject: |
|
|
At last time instead of fix the problem just install the fresh system. But the problem is same. |
|
Back to top |
|
|
Buffoon Veteran
Joined: 17 Jun 2015 Posts: 1369 Location: EU or US
|
Posted: Sun Jul 26, 2015 7:24 pm Post subject: |
|
|
Code: | INPUT_DEVICES=mouse keyboard |
I do not think this variable is set properly. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54210 Location: 56N 3W
|
Posted: Sun Jul 26, 2015 7:32 pm Post subject: |
|
|
stephan-t,
With Gentoo, a fresh install fixes nothing. It only provides you the opportunity not to make the same mistake again.
An conversely, many opportunities to make a new mistake. :)
With gentoo you need to build on what works and fix it when it doesn't work. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
stephan-t Tux's lil' helper
Joined: 12 May 2014 Posts: 122
|
Posted: Mon Jul 27, 2015 3:07 pm Post subject: |
|
|
Buffoon wrote: | Code: | INPUT_DEVICES=mouse keyboard |
I do not think this variable is set properly. |
Code: |
INPUT_DEVICES="mouse keyboard" |
It is the right settings now.
@NeddySeagoon
I understand, but don't find what fix it.
Thanks. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54210 Location: 56N 3W
|
Posted: Mon Jul 27, 2015 5:59 pm Post subject: |
|
|
stephan-t,
If helpers need more information to help you they will ask and suggest how you might provide it.
If your issue in still not fixed, post the information we need to help you fix it.
Thats the same list as in my last post. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
|