| View previous topic :: View next topic |
| Author |
Message |
ChrisJumper
Advocate
Joined: 12 Mar 2005
Posts: 2390
Location: Germany
|
 Posted: Sun Jun 21, 2015 10:58 am Post subject: Brother MFC 5890CN - device descripter read/64 [solved] |
 |
|
Hello together,
actually i have a malfunction with my brother-MFC-5890CN printer after upgrading to Kernel 4.0.0 and 4.0.5:
| Quote: | 1073.392845] scsi 12:0:0:0: Direct-Access Brother MFC-5890CN 1.00 PQ: 0 ANSI: 2
[ 1073.394468] sd 12:0:0:0: Attached scsi generic sg3 type 0
[ 1073.452447] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 1114.327483] usb 2-4: USB disconnect, device number 11
[ 1114.734026] usb 6-2: new full-speed USB device number 14 using uhci_hcd
[ 1114.848012] usb 6-2: device descriptor read/64, error -71
[ 1115.062016] usb 6-2: device descriptor read/64, error -71
[ 1115.265012] usb 6-2: new full-speed USB device number 15 using uhci_hcd
[ 1115.580016] usb 6-2: device descriptor read/64, error -71
[ 1115.995017] usb 6-2: device descriptor read/64, error -71
[ 1116.198016] usb 6-2: new full-speed USB device number 16 using uhci_hcd
[ 1116.607013] usb 6-2: device not accepting address 16, error -71
[ 1116.910016] usb 6-2: new full-speed USB device number 17 using uhci_hcd
[ 1117.319008] usb 6-2: device not accepting address 17, error -71
[ 1117.319019] usb usb6-port2: unable to enumerate USB device |
The Error comes every time i try to print. If i pull and replug the printers power plug, it seems to work as normal. Till i print a new document.
First i thought it could it be a electrical bypass or electrostatic charge, but the printer and computer itself have a grounding through the power supply.
After some searching about the error and printer itself i found someone who propose irqpolling as Kernel option. Which did not solve the issue for me.
Try to use different usb-Ports did not help. |
|
| Back to top |
|
 |
ChrisJumper
Advocate
Joined: 12 Mar 2005
Posts: 2390
Location: Germany
|
| Posted: Mon Jun 22, 2015 11:06 am Post subject: |
|
|
I am not sure if the issue is solved because in the past it came and gos randomly.
1. I compiled Kernel 3.18.11 and went backwards. Malfunction was still there.
2. So i unplugged the Printer for more then a minute. Changed the USB-Cable (i done that before too but that did not solved the issue) back from the 2 meter hama brand to the original 1m cable. But don't plugged it into the Computer.
3. Pluged in the Printer Power supply.
4. Switched the USB-Mouse to the USB Port where the Printer was before.
5. Plug the Printer in that quondam USB-Port, which was used by the Mouse.
Yeeha - It worked like before.
The other Tips like unbind or bind over /sys/bus/pci/drivers/ehci-pci/ didn`t chance the result before.
Edit: spelling
Last edited by ChrisJumper on Mon Jun 22, 2015 6:30 pm; edited 1 time in total |
|
| Back to top |
|
|
charles17
Advocate
Joined: 02 Mar 2008
Posts: 3664
|
| Posted: Mon Jun 22, 2015 1:12 pm Post subject: |
|
|
Are you having the latest printer driver (03/12/2014)?
Anyway, you should get rid of the USB trouble if the printer were connected via network. |
|
| Back to top |
|
|
ChrisJumper
Advocate
Joined: 12 Mar 2005
Posts: 2390
Location: Germany
|
| Posted: Mon Jun 22, 2015 6:26 pm Post subject: |
|
|
I am still using the drivers from 2008 LPR 1.1.2-2, the Driver Install Tool from 03/12/2014 seems to be a Skript which don't contain the driver itself.
LPR-Printer 1,82 MB
Cups-Wrapper 0,01 MB
Driver Install Tool 0,02 MB
I think i will not have a Printer in my Network, where i can not update or secure the System itself.
Thank you for this advice.
I rebooted twice and the System still works. Use the Kernel 3.18.11. If the error appear again I'll be back. |
|
| Back to top |
|
|
|
Kernel & Hardware
