| View previous topic :: View next topic |
| Author |
Message |
trumee
Guru
Joined: 02 Mar 2003
Posts: 551
Location: London,UK
|
 Posted: Sun May 03, 2015 5:54 pm Post subject: Intel NUC5i5RYH no sound (Realtek ALC283 Analog) |
 |
|
Hello,
I have installed gentoo on the Intel NUC. Unfortunately, the sound cards are not recognised in Gentoo. I tried booting in Arch Linux and the sound card works there.
dmesg output
| Code: |
[ 0.214515] Advanced Linux Sound Architecture Driver Initialized.
[ 0.451590] snd_hda_intel 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.452453] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 0.454248] sound hdaudioC0D0: No codec parser is available
[ 0.460422] sound hdaudioC1D0: No codec parser is available
[ 0.479267] ALSA device list:
[ 0.479268] #0: HDA Intel HDMI at 0xf7134000 irq 42
[ 0.479269] #1: HDA Intel PCH at 0xf7130000 irq 43
|
Kernel config
| Code: |
grep -i SND /usr/src/linux/.config
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
|
If i try booting in Arch Linux i get
| Code: |
#aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
|
What is missing in Gentoo which Arch has. I noticed that Arch used a newer kernel 3.19 whereas Gentoo stable is 3.18.11-gentoo.
Thanks |
|
| Back to top |
|
 |
trumee
Guru
Joined: 02 Mar 2003
Posts: 551
Location: London,UK
|
| Posted: Sun May 03, 2015 6:29 pm Post subject: |
|
|
Taking the cue from Arch i installed the 3.19.6-gentoo kernel and now sound works.
| Code: |
#dmesg
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.6-gentoo (root@nuc) (gcc version 4.8.4 (Gentoo 4.8.4 p1.5, pie-0.6.1) ) #1 SMP Sun May 3 13:14:09 CDT 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-3.19.6-gentoo root=/dev/sda6 rootwait rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d500bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d500c000-0x00000000d54f2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d54f3000-0x00000000da322fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da323000-0x00000000da381fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da382000-0x00000000da3a5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da3a6000-0x00000000dacd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dacd6000-0x00000000daffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5i5RYB, BIOS RYBDWi35.86A.0247.2015.0415.1351 04/15/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00D0000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 00D8000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00DA000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 8 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0211c000, 0x0211cfff] PGTABLE
[ 0.000000] BRK [0x0211d000, 0x0211dfff] PGTABLE
[ 0.000000] BRK [0x0211e000, 0x0211efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x0211f000, 0x0211ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21edfffff]
[ 0.000000] [mem 0x200000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd500bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd4ffffff] page 2M
[ 0.000000] [mem 0xd5000000-0xd500bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd54f3000-0xda322fff]
[ 0.000000] [mem 0xd54f3000-0xd55fffff] page 4k
[ 0.000000] [mem 0xd5600000-0xda1fffff] page 2M
[ 0.000000] [mem 0xda200000-0xda322fff] page 4k
[ 0.000000] BRK [0x02120000, 0x02120fff] PGTABLE
[ 0.000000] BRK [0x02121000, 0x02121fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37d62000-0x37ea8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000DA389088 000094 (v01 INTEL NUC5i3RY 000000F7 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DA39D218 00010C (v05 INTEL NUC5i3RY 000000F7 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DA3891B0 014063 (v02 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DACD4F80 000040
[ 0.000000] ACPI: APIC 0x00000000DA39D328 000084 (v03 INTEL NUC5i3RY 000000F7 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DA39D3B0 000044 (v01 INTEL NUC5i3RY 000000F7 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DA39D3F8 00009C (v01 INTEL NUC5i3RY 000000F7 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DA39D498 00003C (v01 INTEL NUC5i3RY 000000F7 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DA39D4D8 000038 (v01 INTEL NUC5i3RY 000000F7 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DA39D510 000495 (v01 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DA39D9A8 000042 (v01 INTEL NUC5i3RY 000000F7 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DA39D9F0 000C7D (v02 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DA39E670 0000A0 (v32 INTEL NUC5i3RY 000000F7 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DA39E710 0004D6 (v02 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39EBE8 000B74 (v02 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA39F760 005BEF (v02 INTEL NUC5i3RY 000000F7 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000DA3A5350 0000D4 (v01 INTEL NUC5i3RY 000000F7 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21eff9000-0x21effcfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xd500bfff]
[ 0.000000] node 0: [mem 0xd54f3000-0xda322fff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21effffff]
[ 0.000000] On node 0 totalpages: 2067930
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13881 pages used for memmap
[ 0.000000] DMA32 zone: 888381 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdc000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low edge lint[0xc0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd500c000-0xd54f2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda323000-0xda381fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda382000-0xda3a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda3a6000-0xdacd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdacd6000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021ec00000 s80064 r8192 d30528 u524288
[ 0.000000] pcpu-alloc: s80064 r8192 d30528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2035596
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-3.19.6-gentoo root=/dev/sda6 rootwait rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8055012K/8271720K available (9792K kernel code, 1108K rwdata, 3256K rodata, 1116K init, 912K bss, 216708K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.338 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.67 BogoMIPS (lpj=1596338)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000007] ACPI: Core revision 20141107
[ 0.017148] ACPI: All ACPI Tables successfully acquired
[ 0.017316] Security Framework initialized
[ 0.017318] SELinux: Initializing.
[ 0.017323] SELinux: Starting in permissive mode
[ 0.017809] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019831] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020734] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020743] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020973] Initializing cgroup subsys freezer
[ 0.021007] CPU: Physical Processor ID: 0
[ 0.021008] CPU: Processor Core ID: 0
[ 0.021013] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022233] mce: CPU supports 7 MCE banks
[ 0.022244] CPU0: Thermal monitoring enabled (TM1)
[ 0.022268] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.022741] Freeing SMP alternatives memory: 32K (ffffffff8202e000 - ffffffff82036000)
[ 0.023370] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.033395] smpboot: CPU0: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (fam: 06, model: 3d, stepping: 04)
[ 0.033402] TSC deadline timer enabled
[ 0.033419] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.033423] ... version: 3
[ 0.033424] ... bit width: 48
[ 0.033425] ... generic registers: 4
[ 0.033425] ... value mask: 0000ffffffffffff
[ 0.033426] ... max period: 0000ffffffffffff
[ 0.033427] ... fixed-purpose events: 3
[ 0.033428] ... event mask: 000000070000000f
[ 0.033676] x86: Booting SMP configuration:
[ 0.033677] .... node #0, CPUs: #1 #2 #3
[ 0.077169] x86: Booted up 1 node, 4 CPUs
[ 0.077171] smpboot: Total of 4 processors activated (12770.70 BogoMIPS)
[ 0.080793] devtmpfs: initialized
[ 0.081001] PM: Registering ACPI NVS region [mem 0xda3a6000-0xdacd5fff] (9633792 bytes)
[ 0.081188] kworker/u8:0 (26) used greatest stack depth: 14872 bytes left
[ 0.081261] RTC time: 18:25:20, date: 05/03/15
[ 0.081352] NET: Registered protocol family 16
[ 0.081443] kworker/u8:0 (29) used greatest stack depth: 13928 bytes left
[ 0.086602] cpuidle: using governor ladder
[ 0.094620] cpuidle: using governor menu
[ 0.094681] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.094683] ACPI: bus type PCI registered
[ 0.094743] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.094746] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.094817] PCI: Using configuration type 1 for base access
[ 0.094991] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.094992] mtrr: probably your BIOS does not setup all CPUs.
[ 0.094993] mtrr: corrected configuration.
[ 0.105030] ACPI: Added _OSI(Module Device)
[ 0.105034] ACPI: Added _OSI(Processor Device)
[ 0.105037] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.105039] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111443] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.116139] ACPI: Dynamic OEM Table Load:
[ 0.116144] ACPI: SSDT 0xFFFF880214D23800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.117026] ACPI: Dynamic OEM Table Load:
[ 0.117030] ACPI: SSDT 0xFFFF880214B58800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.117949] ACPI: Dynamic OEM Table Load:
[ 0.117953] ACPI: SSDT 0xFFFF8802148B1E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.119516] ACPI: Interpreter enabled
[ 0.119523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.119542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.119554] ACPI: (supports S0 S3 S4 S5)
[ 0.119555] ACPI: Using IOAPIC for interrupt routing
[ 0.119583] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.121581] ACPI: Power Resource [PG00] (on)
[ 0.121970] ACPI: Power Resource [PG01] (on)
[ 0.122314] ACPI: Power Resource [PG02] (on)
[ 0.132374] ACPI: Power Resource [FN00] (off)
[ 0.132448] ACPI: Power Resource [FN01] (off)
[ 0.132520] ACPI: Power Resource [FN02] (off)
[ 0.132589] ACPI: Power Resource [FN03] (off)
[ 0.132659] ACPI: Power Resource [FN04] (off)
[ 0.133713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.133718] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.133847] \_SB_.PCI0:_OSC invalid UUID
[ 0.133848] _OSC request data:1 1f 0
[ 0.133851] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.134391] PCI host bridge to bus 0000:00
[ 0.134393] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.134395] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.134396] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.134397] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.134399] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.134406] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.134507] pci 0000:00:02.0: [8086:1626] type 00 class 0x030000
[ 0.134517] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.134544] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.134549] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.134636] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.134643] pci 0000:00:03.0: reg 0x10: [mem 0xf7134000-0xf7137fff 64bit]
[ 0.134767] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.134782] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.134850] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.134907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.134939] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.134957] pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c01f 64bit]
[ 0.135051] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.135122] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
[ 0.135150] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.135157] pci 0000:00:19.0: reg 0x14: [mem 0xf713a000-0xf713afff]
[ 0.135164] pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f]
[ 0.135231] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.135272] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.135315] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.135331] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.135398] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.135451] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.135508] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.135578] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.135651] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.135687] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.135783] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.135842] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.135879] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.135912] pci 0000:00:1d.0: reg 0x10: [mem 0xf7139000-0xf71393ff]
[ 0.136009] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.136066] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.136114] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.136313] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.136325] pci 0000:00:1f.3: reg 0x10: [mem 0xf7138000-0xf71380ff 64bit]
[ 0.136356] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.136504] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.138679] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.141262] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.156387] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.158366] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.160562] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.160568] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.161714] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.161770] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.161825] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.161865] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.161920] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.161975] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.162016] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.162069] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162379] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.162636] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.162638] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.162640] vgaarb: loaded
[ 0.162641] vgaarb: bridge control possible 0000:00:02.0
[ 0.162714] SCSI subsystem initialized
[ 0.162775] libata version 3.00 loaded.
[ 0.162838] ACPI: bus type USB registered
[ 0.162864] usbcore: registered new interface driver usbfs
[ 0.162888] usbcore: registered new interface driver hub
[ 0.162905] usbcore: registered new device driver usb
[ 0.162930] media: Linux media interface: v0.10
[ 0.162943] Linux video capture interface: v2.00
[ 0.162977] pps_core: LinuxPPS API ver. 1 registered
[ 0.162978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.162984] PTP clock support registered
[ 0.163094] Advanced Linux Sound Architecture Driver Initialized.
[ 0.163105] PCI: Using ACPI for IRQ routing
[ 0.164593] PCI: pci_cache_line_size set to 64 bytes
[ 0.164973] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.164974] e820: reserve RAM buffer [mem 0xd500c000-0xd7ffffff]
[ 0.164975] e820: reserve RAM buffer [mem 0xda323000-0xdbffffff]
[ 0.164977] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.164978] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.165204] cfg80211: Calling CRDA to update world regulatory domain
[ 0.165216] NetLabel: Initializing
[ 0.165217] NetLabel: domain hash size = 128
[ 0.165217] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165226] NetLabel: unlabeled traffic allowed by default
[ 0.165311] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.165330] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.167352] Switched to clocksource hpet
[ 0.177184] pnp: PnP ACPI init
[ 0.177366] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.177372] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177628] pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active)
[ 0.177707] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.177709] system 00:02: [io 0xffff] has been reserved
[ 0.177711] system 00:02: [io 0xffff] has been reserved
[ 0.177713] system 00:02: [io 0xffff] has been reserved
[ 0.177716] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.177720] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.177723] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177770] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177810] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.177814] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.177982] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.177984] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.177987] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.177989] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.177990] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.177993] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.177995] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.178011] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.178013] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.178016] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.178018] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.178020] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.178024] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178721] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.178724] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.178726] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.178728] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.178731] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.178733] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.178736] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179194] pnp: PnP ACPI: found 7 devices
[ 0.183839] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183851] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.183855] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.183863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.183864] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.183865] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183867] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
[ 0.183868] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.183909] NET: Registered protocol family 2
[ 0.184091] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.184247] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.184451] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.184484] TCP: reno registered
[ 0.184493] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184521] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184584] NET: Registered protocol family 1
[ 0.184652] RPC: Registered named UNIX socket transport module.
[ 0.184653] RPC: Registered udp transport module.
[ 0.184654] RPC: Registered tcp transport module.
[ 0.184655] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.184663] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.200609] PCI: CLS 64 bytes, default 64
[ 0.200662] Unpacking initramfs...
[ 0.361372] Freeing initrd memory: 1308K (ffff880037d62000 - ffff880037ea9000)
[ 0.361395] dmar: Host address width 39
[ 0.361397] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.361410] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.361411] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.361415] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.361416] dmar: RMRR base: 0x000000daefc000 end: 0x000000daf0afff
[ 0.361417] dmar: RMRR base: 0x000000db800000 end: 0x000000dfffffff
[ 0.361419] dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.361426] dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 0.361433] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.361449] software IO TLB [mem 0xd6323000-0xda323000] (64MB) mapped at [ffff8800d6323000-ffff8800da322fff]
[ 0.361707] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.361715] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.361720] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.361725] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d
[ 0.361781] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.362077] Scanning for low memory corruption every 60 seconds
[ 0.362326] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.362365] audit: initializing netlink subsys (disabled)
[ 0.362377] audit: type=2000 audit(1430677520.353:1): initialized
[ 0.362591] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.364197] VFS: Disk quotas dquot_6.5.2
[ 0.364252] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364747] NFS: Registering the id_resolver key type
[ 0.364758] Key type id_resolver registered
[ 0.364759] Key type id_legacy registered
[ 0.364820] fuse init (API version 7.23)
[ 0.364896] SGI XFS with security attributes, no debug enabled
[ 0.365197] SELinux: Registering netfilter hooks
[ 0.365620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.365625] io scheduler noop registered
[ 0.365628] io scheduler deadline registered
[ 0.365655] io scheduler cfq registered (default)
[ 0.365982] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.366030] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.366512] Non-volatile memory driver v1.3
[ 0.366517] Linux agpgart interface v0.103
[ 0.366583] intel_idle: MWAIT substates: 0x11142120
[ 0.366585] intel_idle: v0.4 model 0x3D
[ 0.366586] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.366966] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.366972] ACPI: Sleep Button [SLPB]
[ 0.367015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.367018] ACPI: Power Button [PWRB]
[ 0.367061] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.367064] ACPI: Power Button [PWRF]
[ 0.367897] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.367900] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.368066] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.368067] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.368090] [drm] Initialized drm 1.1.0 20060810
[ 0.368549] [drm] Memory usable by graphics device = 4096M
[ 0.368551] [drm] Replacing VGA console driver
[ 0.374317] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.374320] [drm] Driver supports precise vblank timestamp query.
[ 0.374424] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.383882] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.384053] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.384099] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 0.384948] loop: module loaded
[ 0.385110] tun: Universal TUN/TAP device driver, 1.6
[ 0.385111] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.385157] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.385158] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.385175] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.385177] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.385201] sky2: driver version 1.30
[ 0.385403] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.385518] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.385574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.385576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.385577] usb usb1: Product: xHCI Host Controller
[ 0.385578] usb usb1: Manufacturer: Linux 3.19.6-gentoo xhci-hcd
[ 0.385579] usb usb1: SerialNumber: 0000:00:14.0
[ 0.385669] hub 1-0:1.0: USB hub found
[ 0.385684] hub 1-0:1.0: 11 ports detected
[ 0.388209] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.388273] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.388324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.388325] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.388326] usb usb2: Product: xHCI Host Controller
[ 0.388327] usb usb2: Manufacturer: Linux 3.19.6-gentoo xhci-hcd
[ 0.388328] usb usb2: SerialNumber: 0000:00:14.0
[ 0.388467] hub 2-0:1.0: USB hub found
[ 0.388475] hub 2-0:1.0: 4 ports detected
[ 0.389432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.389434] ehci-pci: EHCI PCI platform driver
[ 0.389538] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.389589] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.389611] ehci-pci 0000:00:1d.0: debug port 2
[ 0.393499] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.393509] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7139000
[ 0.399218] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.399258] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.399260] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.399262] usb usb3: Product: EHCI Host Controller
[ 0.399264] usb usb3: Manufacturer: Linux 3.19.6-gentoo ehci_hcd
[ 0.399266] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.399481] hub 3-0:1.0: USB hub found
[ 0.399492] hub 3-0:1.0: 2 ports detected
[ 0.399636] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.399645] ohci-pci: OHCI PCI platform driver
[ 0.399666] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.399723] usbcore: registered new interface driver usblp
[ 0.399750] usbcore: registered new interface driver usb-storage
[ 0.399801] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.402709] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.402717] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.402863] mousedev: PS/2 mouse device common for all mice
[ 0.403092] rtc_cmos 00:03: RTC can wake from S4
[ 0.403242] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.403275] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.403383] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
[ 0.403387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.403568] IR NEC protocol handler initialized
[ 0.403571] IR RC5(x/sz) protocol handler initialized
[ 0.403573] IR RC6 protocol handler initialized
[ 0.403575] IR JVC protocol handler initialized
[ 0.403578] IR Sony protocol handler initialized
[ 0.403580] IR SANYO protocol handler initialized
[ 0.403583] IR Sharp protocol handler initialized
[ 0.403585] IR MCE Keyboard/mouse protocol handler initialized
[ 0.403588] IR XMP protocol handler initialized
[ 0.403606] usbcore: registered new interface driver uvcvideo
[ 0.403608] USB Video Class driver (1.1.1)
[ 0.403681] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 0.403701] Intel P-state driver initializing.
[ 0.403827] Driver 'mmcblk' needs updating - please use bus_type methods
[ 0.403911] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.404527] usbcore: registered new interface driver usbhid
[ 0.404531] usbhid: USB HID core driver
[ 0.405601] usbcore: registered new interface driver snd-usb-audio
[ 0.405633] Netfilter messages via NETLINK v0.30.
[ 0.405657] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.405835] ctnetlink v0.93: registering with nfnetlink.
[ 0.406127] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.406203] TCP: cubic registered
[ 0.406207] Initializing XFRM netlink socket
[ 0.406523] NET: Registered protocol family 10
[ 0.407037] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.407133] sit: IPv6 over IPv4 tunneling driver
[ 0.407456] NET: Registered protocol family 17
[ 0.407497] Key type dns_resolver registered
[ 0.408561] registered taskstats version 1
[ 0.409780] Magic number: 15:501:442
[ 0.409908] pcieport 0000:00:1c.3: hash matches
[ 0.410034] console [netcon0] enabled
[ 0.410037] netconsole: network logging started
[ 0.410132] fbcon: inteldrmfb (fb0) is primary device
[ 0.410327] PM: Hibernation image not present or could not be loaded.
[ 0.410333] ALSA device list:
[ 0.410335] No soundcards found.
[ 0.414554] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
[ 0.414600] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 0.414640] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 0.418876] sound hdaudioC1D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 0.418877] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.418878] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.418879] sound hdaudioC1D0: mono: mono_out=0x0
[ 0.418879] sound hdaudioC1D0: inputs:
[ 0.418880] sound hdaudioC1D0: Mic=0x19
[ 0.455684] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
[ 0.455845] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 0.455889] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 0.459542] Console: switching to colour frame buffer device 240x67
[ 0.463553] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.463554] i915 0000:00:02.0: registered panic notifier
[ 0.469471] Freeing unused kernel memory: 1116K (ffffffff81f17000 - ffffffff8202e000)
[ 0.469475] Write protecting the kernel read-only data: 14336k
[ 0.469776] Freeing unused kernel memory: 436K (ffff880001993000 - ffff880001a00000)
[ 0.470003] Freeing unused kernel memory: 840K (ffff880001d2e000 - ffff880001e00000)
[ 0.475797] mount (1238) used greatest stack depth: 13912 bytes left
[ 0.483202] cut (1280) used greatest stack depth: 13840 bytes left
[ 0.700977] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.739960] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 0.815316] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[ 0.815320] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.815549] hub 3-1:1.0: USB hub found
[ 0.815617] hub 3-1:1.0: 8 ports detected
[ 0.906533] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[ 0.906537] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.906539] usb 1-1: Product: USB Receiver
[ 0.906541] usb 1-1: Manufacturer: Logitech
[ 0.908498] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/input/input13
[ 0.958925] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 0.961025] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input14
[ 1.011998] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 1.014311] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 1.166672] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.331605] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.343260] usb 2-4: New USB device found, idVendor=1058, idProduct=0748
[ 1.343263] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 1.343266] usb 2-4: Product: My Passport 0748
[ 1.343268] usb 2-4: Manufacturer: Western Digital
[ 1.343269] usb 2-4: SerialNumber: 575831314143324534363430
[ 1.343800] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 1.343905] scsi host0: usb-storage 2-4:1.0
[ 1.362507] tsc: Refined TSC clocksource calibration: 1596.303 MHz
[ 2.346066] scsi 0:0:0:0: Direct-Access WD My Passport 0748 1019 PQ: 0 ANSI: 6
[ 2.346302] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.346483] sd 0:0:0:0: [sda] 2930210816 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.346634] scsi 0:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6
[ 2.346850] sd 0:0:0:0: [sda] Write Protect is off
[ 2.346854] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[ 2.347283] sd 0:0:0:0: [sda] No Caching mode page found
[ 2.347285] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2.347895] scsi 0:0:0:1: Attached scsi generic sg1 type 13
[ 2.361829] Switched to clocksource tsc
[ 2.399412] sda: sda1 sda4 < sda5 sda6 >
[ 2.400431] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.509581] random: nonblocking pool is initialized
[ 8.863415] EXT4-fs (sda6): couldn't mount as ext3 due to feature incompatibilities
[ 8.863793] EXT4-fs (sda6): couldn't mount as ext2 due to feature incompatibilities
[ 8.979895] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.979978] mount (2610) used greatest stack depth: 13640 bytes left
[ 9.172140] init (2617) used greatest stack depth: 13512 bytes left
[ 9.801464] loadkeys (2632) used greatest stack depth: 13352 bytes left
[ 9.801625] init-early.sh (2630) used greatest stack depth: 12568 bytes left
[ 12.110000] systemd-udevd[2940]: starting version 216
[ 12.579333] Registered IR keymap rc-rc6-mce
[ 12.579389] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0/input15
[ 12.579446] rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:01/rc/rc0
[ 12.579510] input: MCE IR Keyboard/Mouse (nuvoton-cir) as /devices/virtual/input/input16
[ 12.579578] nuvoton_cir: driver has been successfully loaded
[ 12.580160] input: PC Speaker as /devices/platform/pcspkr/input/input17
[ 12.888055] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 12.888058] Copyright(c) 2003- 2014 Intel Corporation
[ 12.890525] iwlwifi 0000:02:00.0: Unsupported splx structure
[ 13.014460] iwlwifi 0000:02:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
[ 13.041899] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 13.042267] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 13.042712] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 13.110010] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 13.195381] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 13.200773] systemd-udevd[2960]: renamed network interface wlan0 to wlp2s0
[ 16.359263] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 16.523832] usb 1-7: No LPM exit latency info found, disabling LPM.
[ 16.524953] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[ 16.524957] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 17.444516] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[ 18.407874] ip (3319) used greatest stack depth: 12408 bytes left
[ 19.164548] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 19.165087] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 19.193341] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 19.945595] cfg80211: Calling CRDA to update world regulatory domain
[ 20.139888] cfg80211: World regulatory domain updated:
[ 20.139892] cfg80211: DFS Master region: unset
[ 20.139894] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 20.139897] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.139899] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.139901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.139903] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 20.139906] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 20.139907] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 20.139909] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 20.139911] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
|
| Code: |
#aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
default:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=pcsp
pcsp, pcsp
Default Audio Device
sysdefault:CARD=pcsp
pcsp, pcsp
Default Audio Device
front:CARD=pcsp,DEV=0
pcsp, pcsp
Front speakers |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
