Audigy LS

[grandpajive]

Hi.

I am trying to get my brand new Audigy LS to work. I've searched for hours and no mention if it works with the emu10k1-cvs module.

I've emerged emu10k1-cvs. I'm running the gentoo-sources kernel. I've added:

alias sound emu10k1

to /etc/modules.d/aliases

/etc/modules.d/emu10k1 has this in it:

post-install emu10k1 /usr/bin/audigy-script restore
pre-remove emu10k1 /usr/bin/audigy-script save

--

I've only compiled my kernel with the soundcore.o and sound.o modules.. I also have modules for my bt848 tv card installed.

Heres what happens when I modprobe:

root@gentoo grandpajive # modprobe emu10k1
/lib/modules/2.4.20-gentoo-r8/kernel/drivers/sound/emu10k1/emu10k1.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-gentoo-r8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod /lib/modules/2.4.20-gentoo-r8/kernel/drivers/sound/emu10k1/emu10k1.o failed
/lib/modules/2.4.20-gentoo-r8/kernel/drivers/sound/emu10k1/emu10k1.o: insmod emu10k1 failed
--
here's what /proc/pci states:

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0).
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0).
IRQ 10.
I/O at 0xe800 [0xe81f].
Bus 0, device 8, function 0:
Multimedia audio controller: PCI device 1102:0007 (Creative Labs) (rev 0).
IRQ 12.
Master Capable. Latency=64. Min Gnt=2.Max Lat=20.
I/O at 0xe400 [0xe41f].
Bus 0, device 8, function 1:
Input device controller: PCI device 1102:7005 (Creative Labs) (rev 0).
Master Capable. Latency=64.
I/O at 0xec00 [0xec07].
Bus 0, device 9, function 0:
Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 2).
IRQ 11.
Master Capable. Latency=64. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xdddfe000 [0xdddfefff].
Bus 0, device 9, function 1:
Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 2).
IRQ 11.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xdddff000 [0xdddfffff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xfc00 [0xfc0f].
Bus 0, device 17, function 4:
USB Controller: VIA Technologies, Inc. USB (#3) (rev 27).
IRQ 12.
Master Capable. Latency=64.
I/O at 0xe000 [0xe01f].
Bus 0, device 17, function 3:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 27).
IRQ 12.
Master Capable. Latency=64.
I/O at 0xdc00 [0xdc1f].
Bus 0, device 17, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 27).
IRQ 12.
Master Capable. Latency=64.
I/O at 0xd800 [0xd81f].
Bus 1, device 0, function 0:
VGA compatible controller: PCI device 10de:0322 (nVidia Corporation) (rev 161).
IRQ 11.
Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xde000000 [0xdeffffff].
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
---

So, basically, I dont know if it is just unsupported at this time or not. Any ideas/pointers/incantations are welcome.
_________________
-gj

[Coogee]

[grandpajive]

From /usr/doc/emu10k1-cvs-16042003/README:

Installation
------------
1. As root type:

make install
(obviously that one is unneccesary)

2. Add a new reference to the driver in /etc/modules.conf:

alias sound emu10k1

...

wasn't sure if I should add that one in... doesn't seem to make a differance at this point if it is in there or not.
_________________
-gj

[grandpajive]

No other ideas?
_________________
-gj

[NicholasDWolfwood]

For my Audigy 2 card, IIRC, all I did was emerged the emu10k1-cvs drivers and had sound.o as a module.

I put in my modules.autoload file in this order

sound
ac97_codec
emu10k1

I use the 2.6 kernel series now, so I just have it enabled in my kernel because the CVS branch of the emu10k1 driver has been integrated into the 2.6 kernel...

The card honestly should work...all I did, like I said, was

[Coogee]

If you check this list http://www.opensound.com/osshw.html, you can see that there seems to be a difference between the normal Audigys and the Audigy LS, because an extra driver is listed (Beta status).
Maybe your card is simply not supported yet...

[grandpajive]

That does indeed seem to be the case. Ah well. Thanks to all anyways.
_________________
-gj