Gigabyte 990FXA-UD5 issues, USB and video

[venquessa]

I've had endless problem with this mother board and Linux so far. First the in kernel network r8169 driver crashes the motherboard causing instability in the USB controllers and preventing the NVidia driver from loading. Installing the offical realtek r8168 driver from their website fixes this.

The problem I am currently facing is almost identical to this:
http://unix.stackexchange.com/questions/72625/why-is-usb-not-working-in-linux-when-it-works-in-uefi-bios

When I set the mentioned IOMMU controller to Enabled the NVidia driver page faults in dmesg and won't start. Set it to disabled and it's fine. I recall having this on day one, my keyboard and mouse would work but X wouldn't start, when I turned the IOMMU off my keyboard and mouse stopped working and X worked, but I found 2 USB ports that worked for keyboard and mouse.


So, if I want the X server I only have 4 working USB ports, 2 front, 2 rear, the other 6 or so are dead, any attempt to plug something in get errors in dmesg.

Any ideas?

dmesg following boot up:

[venquessa]

The rest of dmesg, some interesting stuff...

[code:1:06cde631c8]
[ 0.000000] ACPI: MCFG 0x00000000BEE1EA60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEE1EAA0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEE1EAD8 0013CC (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 0x00000000BEE1FEA8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: BGRT 0x00000000BEE1FEE0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042e600000-ffff88043c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe478fff]
[ 0.000000] node 0: [mem 0xbf155000-0xbf155fff]
[ 0.000000] node 0: [mem 0xbf35c000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x43effffff]
[ 0.000000] On node 0 totalpages: 4184250
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10616 pages used for memmap
[ 0.000000] DMA32 zone: 776478 pages, LIFO batch:31
[ 0.000000] Normal zone: 46536 pages used for memmap
[ 0.000000] Normal zone: 3403775 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88043ec00000 s69248 r8192 d20864 u262144
[ 0.000000] pcpu-alloc: s69248 r8192 d20864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4127021
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.8-gentoo-r1 root=/dev/sda3 ro video=uvesafb:1024x768-32,mtrr:3,ywrap
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 22856(69%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 16407088K/16737000K available (5401K kernel code, 457K rwdata, 1668K rodata, 812K init, 412K bss, 329912K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1032 0
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 4018.317 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.63 BogoMIPS (lpj=40183170)
[ 0.000176] pid_max: default: 32768 minimum: 301
[ 0.000265] ACPI: Core revision 20140724
[ 0.002362] ACPI: All ACPI Tables successfully acquired
[ 0.011883] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011971] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012260] CPU: Physical Processor ID: 0
[ 0.012348] CPU: Processor Core ID: 0
[ 0.012433] mce: CPU supports 7 MCE banks
[ 0.012523] LVT offset 1 assigned for vector 0xf9
[ 0.012611] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.012820] Freeing SMP alternatives memory: 24K (ffffffff81829000 - ffffffff8182f000)
[ 0.013267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.113427] smpboot: CPU0: AMD FX(tm)-9590 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.224425] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224621] ... version: 0
[ 0.224706] ... bit width: 48
[ 0.224791] ... generic registers: 6
[ 0.224876] ... value mask: 0000ffffffffffff
[ 0.224962] ... max period: 00007fffffffffff
[ 0.225047] ... fixed-purpose events: 0
[ 0.225132] ... event mask: 000000000000003f
[ 0.225413] x86: Booting SMP configuration:
[ 0.225498] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.318441] x86: Booted up 1 node, 8 CPUs
[ 0.318611] smpboot: Total of 8 processors activated (64293.07 BogoMIPS)
[ 0.327739] devtmpfs: initialized
[ 0.328061] NET: Registered protocol family 16
[ 0.328230] cpuidle: using governor ladder
[ 0.328316] cpuidle: using governor menu
[ 0.328448] ACPI: bus type PCI registered
[ 0.328606] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.328743] PCI: not using MMCONFIG
[ 0.328828] PCI: Using configuration type 1 for base access
[ 0.328913] PCI: Using configuration type 1 for extended access
[ 0.329142] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.329230] mtrr: probably your BIOS does not setup all CPUs.
[ 0.329316] mtrr: corrected configuration.
[ 0.330855] ACPI: Added _OSI(Module Device)
[ 0.330940] ACPI: Added _OSI(Processor Device)
[ 0.331026] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.331112] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.332514] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.354853] ACPI: Interpreter enabled
[ 0.354941] ACPI: (supports S0 S5)
[ 0.355026] ACPI: Using IOAPIC for interrupt routing
[ 0.355208] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.355371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.355698] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.626369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.626460] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.626551] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.626792] PCI host bridge to bus 0000:00
[ 0.626878] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.626965] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.627052] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.627138] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.627225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.627315] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.627402] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.627489] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.627585] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.627682] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.627713] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.627766] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.627795] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.627843] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.627871] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.627927] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.627941] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.627948] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.627954] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.627961] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.627967] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.627974] pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
[ 0.628054] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.628064] pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
[ 0.628152] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.628165] pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
[ 0.628223] pci 0000:00:12.2: supports D1 D2
[ 0.628224] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.628277] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.628286] pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
[ 0.628373] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.628386] pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
[ 0.628444] pci 0000:00:13.2: supports D1 D2
[ 0.628445] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.628499] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.628591] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.628606] pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[ 0.628652] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.628699] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.628790] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.628857] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.628866] pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
[ 0.628954] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.629006] pci 0000:00:15.0: supports D1 D2
[ 0.629061] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.629114] pci 0000:00:15.1: supports D1 D2
[ 0.629168] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.629220] pci 0000:00:15.2: supports D1 D2
[ 0.629276] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.629286] pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
[ 0.629372] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.629386] pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
[ 0.629445] pci 0000:00:16.2: supports D1 D2
[ 0.629446] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.629500] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.629552] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.629599] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.629648] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.629700] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.629746] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.629835] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
[ 0.629846] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.629855] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.629865] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.629871] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.629877] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.629955] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.629966] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.644736] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.644825] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.644827] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.644829] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.644876] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.644891] pci 0000:02:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[ 0.644958] pci 0000:02:00.0: supports D1 D2
[ 0.644959] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.664748] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.664836] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.664884] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.664893] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.664899] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.664904] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.664910] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.664915] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.664921] pci 0000:03:00.0: reg 0x24: [mem 0xfe410000-0xfe4101ff]
[ 0.664926] pci 0000:03:00.0: reg 0x30: [mem 0xfe400000-0xfe40ffff pref]
[ 0.664954] pci 0000:03:00.0: PME# supported from D3hot
[ 0.684754] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.684842] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.684844] pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.684896] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.684914] pci 0000:04:0e.0: reg 0x10: [mem 0xfe300000-0xfe3007ff]
[ 0.684924] pci 0000:04:0e.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.684997] pci 0000:04:0e.0: supports D2
[ 0.684998] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.685043] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.685132] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.685135] pci 0000:00:14.4: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.685137] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.685138] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.685139] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.685141] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.685142] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.685143] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.685144] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.685199] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.685216] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.685240] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[ 0.685255] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 0.685334] pci 0000:05:00.0: supports D1 D2
[ 0.685335] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.704777] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.704866] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.704872] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.704932] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.704953] pci 0000:06:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
[ 0.705047] pci 0000:06:00.0: supports D1 D2
[ 0.705048] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.724790] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 0.724880] pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.724941] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.724955] pci 0000:07:00.0: reg 0x10: [io 0xa040-0xa047]
[ 0.724963] pci 0000:07:00.0: reg 0x14: [io 0xa030-0xa033]
[ 0.724971] pci 0000:07:00.0: reg 0x18: [io 0xa020-0xa027]
[ 0.724979] pci 0000:07:00.0: reg 0x1c: [io 0xa010-0xa013]
[ 0.724987] pci 0000:07:00.0: reg 0x20: [io 0xa000-0xa00f]
[ 0.724995] pci 0000:07:00.0: reg 0x24: [mem 0xfe110000-0xfe1101ff]
[ 0.725004] pci 0000:07:00.0: reg 0x30: [mem 0xfe100000-0xfe10ffff pref]
[ 0.725044] pci 0000:07:00.0: PME# supported from D3hot
[ 0.744796] pci 0000:00:15.2: PCI bridge to [bus 07]
[ 0.744886] pci 0000:00:15.2: bridge window [io 0xa000-0xafff]
[ 0.744888] pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.744918] pci_bus 0000:00: on NUMA node 0
[ 0.745209] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.745661] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.746115] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.747611] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.748053] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.748453] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.748852] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.749253] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.749748] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.749834] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.749923] vgaarb: loaded
[ 0.750007] vgaarb: bridge control possible 0000:01:00.0
[ 0.750174] SCSI subsystem initialized
[ 0.750301] libata version 3.00 loaded.
[ 0.750303] ACPI: bus type USB registered
[ 0.750406] usbcore: registered new interface driver usbfs
[ 0.750501] usbcore: registered new interface driver hub
[ 0.750605] usbcore: registered new device driver usb
[ 0.750714] media: Linux media interface: v0.10
[ 0.750808] Linux video capture interface: v2.00
[ 0.750919] PCI: Using ACPI for IRQ routing
[ 0.756991] PCI: pci_cache_line_size set to 64 bytes
[ 0.757044] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.757045] e820: reserve RAM buffer [mem 0xbe479000-0xbfffffff]
[ 0.757046] e820: reserve RAM buffer [mem 0xbf156000-0xbfffffff]
[ 0.757047] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.757047] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.757181] Switched to clocksource hpet
[ 0.758549] pnp: PnP ACPI init
[ 0.758691] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.758782] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.758968] system 00:01: [io 0x040b] has been reserved
[ 0.759056] system 00:01: [io 0x04d6] has been reserved
[ 0.759144] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.759231] system 00:01: [io 0x0c14] has been reserved
[ 0.759317] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.759404] system 00:01: [io 0x0c52] has been reserved
[ 0.759492] system 00:01: [io 0x0c6c] has been reserved
[ 0.759581] system 00:01: [io 0x0c6f] has been reserved
[ 0.759668] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.759755] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.759842] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.759929] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.760015] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.760102] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.760189] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.760276] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.760363] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.760452] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.760539] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.760627] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.760714] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.760802] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.760890] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.760977] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.761065] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.761152] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.761261] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.761349] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.761436] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.761523] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.761697] pnp 00:03: [dma 0 disabled]
[ 0.761731] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.761753] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.761796] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.761884] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.761910] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.761998] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.762075] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.762164] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.762234] pnp: PnP ACPI: found 9 devices
[ 0.766883] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.766970] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.767058] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.767146] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.767249] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.767337] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.767426] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.767512] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.767600] pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.767692] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.767779] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.767868] pci 0000:00:14.4: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.767960] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.768047] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.768137] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.768227] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 0.768315] pci 0000:00:15.1: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.768406] pci 0000:00:15.2: PCI bridge to [bus 07]
[ 0.768492] pci 0000:00:15.2: bridge window [io 0xa000-0xafff]
[ 0.768581] pci 0000:00:15.2: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.768672] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.768673] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.768674] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.768675] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.768676] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.768677] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.768679] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.768680] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.768681] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.768682] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.768683] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.768684] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.768685] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.768686] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.768687] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.768688] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.768689] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.768690] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.768691] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.768692] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.768693] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.768694] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.768695] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.768696] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.768697] pci_bus 0000:06: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.768698] pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
[ 0.768699] pci_bus 0000:07: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.768759] NET: Registered protocol family 2
[ 0.768979] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.769234] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.769480] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.769587] TCP: reno registered
[ 0.769673] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.769799] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.769985] NET: Registered protocol family 1
[ 0.770140] RPC: Registered named UNIX socket transport module.
[ 0.770226] RPC: Registered udp transport module.
[ 0.770312] RPC: Registered tcp transport module.
[ 0.770397] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.127594] pci 0000:01:00.0: Video device with shadowed ROM
[ 1.127761] PCI: CLS 64 bytes, default 64
[ 1.128023] PCI-DMA: Disabling AGP.
[ 1.128162] PCI-DMA: aperture base @ f8000000 size 65536 KB
[ 1.128249] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
[ 1.128335] [mem 0xf8000000-0xfbffffff] page 2M
[ 1.128341] PCI-DMA: using GART IOMMU.
[ 1.128427] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.132116] perf: AMD NB counters detected
[ 1.132247] microcode: CPU0: patch_level=0x06000803
[ 1.132337] microcode: CPU1: patch_level=0x06000803
[ 1.132430] microcode: CPU2: patch_level=0x06000803
[ 1.132522] microcode: CPU3: patch_level=0x06000803
[ 1.132614] microcode: CPU4: patch_level=0x06000803
[ 1.132707] microcode: CPU5: patch_level=0x06000803
[ 1.132803] microcode: CPU6: patch_level=0x06000803
[ 1.132896] microcode: CPU7: patch_level=0x06000803
[ 1.133015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.133153] LVT offset 0 assigned for vector 0x400
[ 1.133249] perf: AMD IBS detected (0x000000ff)
[ 1.133806] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.133922] audit: initializing netlink subsys (disabled)
[ 1.134015] audit: type=2000 audit(1426952970.030:1): initialized
[ 1.134650] NFS: Registering the id_resolver key type
[ 1.134742] Key type id_resolver registered
[ 1.134827] Key type id_legacy registered
[ 1.134915] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.135058] ntfs: driver 2.1.30 [Flags: R/W].
[ 1.135204] msgmni has been set to 32173
[ 1.135446] io scheduler noop registered
[ 1.135533] io scheduler deadline registered
[ 1.135631] io scheduler cfq registered (default)
[ 1.143832] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.164457] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.164758] Non-volatile memory driver v1.3
[ 1.164897] Linux agpgart interface v0.103
[ 1.165078] uvesafb: failed to execute /sbin/v86d
[ 1.165163] uvesafb: make sure that the v86d helper is installed and executable
[ 1.165252] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 1.165338] uvesafb: vbe_init() failed with -22
[ 1.165426] uvesafb: probe of uvesafb.0 failed with error -22
[ 1.165578] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.165670] ACPI: Power Button [PWRB]
[ 1.165784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.165872] ACPI: Power Button [PWRF]
[ 1.165994] ACPI: acpi_idle registered with cpuidle
[ 1.167687] brd: module loaded
[ 1.168297] loop: module loaded
[ 1.168456] nbd: registered device at major 43
[ 1.169593] Uniform Multi-Platform E-IDE driver
[ 1.169889] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.170033] Probing IDE interface ide0...
[ 1.778002] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.778165] Probing IDE interface ide1...
[ 2.128172] tsc: Refined TSC clocksource calibration: 4018.312 MHz
[ 2.378393] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.378580] ide-gd driver 1.18
[ 2.378676] ide-cd driver 5.00
[ 2.378840] ahci 0000:00:11.0: version 3.0
[ 2.378982] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.379072] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.379766] scsi host0: ahci
[ 2.379956] scsi host1: ahci
[ 2.380114] scsi host2: ahci
[ 2.380266] scsi host3: ahci
[ 2.380427] scsi host4: ahci
[ 2.380586] scsi host5: ahci
[ 2.380699] ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
[ 2.380791] ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
[ 2.380879] ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
[ 2.380967] ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
[ 2.381057] ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b300 irq 19
[ 2.381146] ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b380 irq 19
[ 2.381313] ahci 0000:03:00.0: irq 28 for MSI/MSI-X
[ 2.381344] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.381459] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.381725] scsi host6: ahci
[ 2.381889] scsi host7: ahci
[ 2.382005] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 28
[ 2.382096] ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 28
[ 2.382243] ahci 0000:07:00.0: irq 29 for MSI/MSI-X
[ 2.382278] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.382367] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.382644] scsi host8: ahci
[ 2.382808] scsi host9: ahci
[ 2.382921] ata9: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110100 irq 29
[ 2.383013] ata10: SATA max UDMA/133 abar m512@0xfe110000 port 0xfe110180 irq 29
[ 2.383189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.383293] ohci-pci: OHCI PCI platform driver
[ 2.383427] QUIRK: Enable AMD PLL fix
[ 2.383434] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.383524] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.383626] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
[ 2.442512] hub 1-0:1.0: USB hub found
[ 2.442617] hub 1-0:1.0: 5 ports detected
[ 2.442812] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.442901] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.442996] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe608000
[ 2.502602] hub 2-0:1.0: USB hub found
[ 2.502706] hub 2-0:1.0: 5 ports detected
[ 2.502890] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.502979] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 3
[ 2.503074] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
[ 2.562650] hub 3-0:1.0: USB hub found
[ 2.562753] hub 3-0:1.0: 2 ports detected
[ 2.563972] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.564066] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 2.564159] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe605000
[ 2.622674] hub 4-0:1.0: USB hub found
[ 2.622778] hub 4-0:1.0: 4 ports detected
[ 2.622959] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.623047] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5
[ 2.623211] xhci_hcd 0000:02:00.0: irq 31 for MSI/MSI-X
[ 2.623328] hub 5-0:1.0: USB hub found
[ 2.623425] hub 5-0:1.0: 2 ports detected
[ 2.623546] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.623633] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6
[ 2.623810] hub 6-0:1.0: USB hub found
[ 2.623909] hub 6-0:1.0: 2 ports detected
[ 2.624057] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.624146] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 7
[ 2.624333] xhci_hcd 0000:06:00.0: irq 32 for MSI/MSI-X
[ 2.624511] hub 7-0:1.0: USB hub found
[ 2.624613] hub 7-0:1.0: 2 ports detected
[ 2.624740] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.624827] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
[ 2.625006] hub 8-0:1.0: USB hub found
[ 2.625103] hub 8-0:1.0: 2 ports detected
[ 2.625253] usbcore: registered new interface driver cdc_acm
[ 2.625347] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.625448] usbcore: registered new interface driver usblp
[ 2.625547] usbcore: registered new interface driver cdc_wdm
[ 2.625664] usbcore: registered new interface driver usb-storage
[ 2.625793] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.626232] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.626323] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.626549] mousedev: PS/2 mouse device common for all mice
[ 2.626752] I2O subsystem v1.325
[ 2.626845] i2o: max drivers = 8
[ 2.627228] usbcore: registered new interface driver usbhid
[ 2.627328] usbhid: USB HID core driver
[ 2.627466] TCP: cubic registered
[ 2.627562] NET: Registered protocol family 17
[ 2.627666] Key type dns_resolver registered
[ 2.628232] registered taskstats version 1
[ 2.628657] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.718563] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.728574] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.738522] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.788601] usb 1-3: new low-speed USB device number 2 using ohci-pci
[ 2.918701] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.918821] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.920006] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[ 2.920108] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.920216] ata5.00: ATAPI: ATAPI iHAS324 F, CL14, max UDMA/133
[ 2.921170] ata5.00: configured for UDMA/133
[ 2.921401] ata2.00: configured for UDMA/133
[ 2.928711] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.928717] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.928744] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.928779] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.929765] ata6.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[ 2.929862] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.929955] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[ 2.930035] ata9.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[ 2.930037] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.930227] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.930318] ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[ 2.930406] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.930962] ata9.00: configured for UDMA/133
[ 2.931493] ata3.00: configured for UDMA/133
[ 2.931587] ata6.00: configured for UDMA/133
[ 2.931684] ata4.00: configured for UDMA/133
[ 2.938719] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.946902] ata1.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
[ 2.947000] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.953207] ata1.00: configured for UDMA/133
[ 3.128923] Switched to clocksource tsc
[ 4.189517] floppy0: no floppy controllers found
[ 4.189827] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 4.190069] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 4.190073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.190134] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 A39C PQ: 0 ANSI: 5
[ 4.190245] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.190260] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.190304] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[ 4.190325] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.190330] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.190350] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.190402] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.190432] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.190438] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.190440] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.190457] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.190468] scsi 3:0:0:0: Direct-Access ATA Hitachi HDP72505 A52A PQ: 0 ANSI: 5
[ 4.190571] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.190601] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.190601] sd 3:0:0:0: [sdd] Write Protect is off
[ 4.190603] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.190614] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.191820] sd 0:0:0:0: [sda] Write Protect is off
[ 4.191847] scsi 4:0:0:0: CD-ROM ATAPI iHAS324 F CL14 PQ: 0 ANSI: 5
[ 4.191998] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.192018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.198209] sda: sda1 sda2 sda3 sda4
[ 4.198551] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.199412] sdb: sdb1
[ 4.199675] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.213129] sr 4:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.213264] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.213439] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.213526] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 4.213679] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72101 A39C PQ: 0 ANSI: 5
[ 4.213888] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.213906] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 4.213968] scsi 8:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[ 4.214073] sd 8:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.214075] sd 8:0:0:0: [sdf] 4096-byte physical blocks
[ 4.214078] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 4.214126] sd 8:0:0:0: [sdf] Write Protect is off
[ 4.214128] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 4.214146] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.214543] sdc: sdc1 sdc2 sdc3
[ 4.214731] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.214868] sd 5:0:0:0: [sde] Write Protect is off
[ 4.214955] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.214973] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.222135] sde: sde1
[ 4.222402] sd 5:0:0:0: [sde] Attached SCSI disk
[ 4.231976] sdf: unknown partition table
[ 4.232226] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 4.263286] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 >
[ 4.263758] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.266122] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 4.266344] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 4.268412] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.268505] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 4.268875] Freeing unused kernel memory: 812K (ffffffff8175e000 - ffffffff81829000)
[ 4.817912] systemd-udevd[1790]: starting version 216
[ 4.823044] random: systemd-udevd urandom read with 78 bits of entropy available
[ 4.862962] rtc_cmos 00:04: RTC can wake from S4
[ 4.863075] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.863106] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.889253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.889254] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 4.890325] ehci-pci: EHCI PCI platform driver
[ 4.892133] r8168 Gigabit Ethernet driver 8.039.00-NAPI loaded
[ 4.892215] r8168 0000:05:00.0: irq 33 for MSI/MSI-X
[ 4.899317] kvm: Nested Virtualization enabled
[ 4.899319] kvm: Nested Paging enabled
[ 4.913319] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 4.913323] r8168 Copyright (C) 2014 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 4.921274] nvidia: module license 'NVIDIA' taints kernel.
[ 4.921275] Disabling lock debugging due to kernel taint
[ 4.933151] random: nonblocking pool is initialized
[ 5.179815] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.180030] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015
[ 28.005137] usbhid 1-3:1.0: can't add hid device: -110
[ 28.005154] usbhid: probe of 1-3:1.0 failed with error -110
[ 28.155185] usb 1-4: new full-speed USB device number 3 using ohci-pci
[ 28.305280] usb 1-4: device descriptor read/64, error -32
[ 28.565449] usb 1-4: device descriptor read/64, error -32
[ 28.845633] usb 1-4: new full-speed USB device number 4 using ohci-pci
[ 28.995736] usb 1-4: device descriptor read/64, error -32
[ 29.255900] usb 1-4: device descriptor read/64, error -32
[ 29.536084] usb 1-4: new full-speed USB device number 5 using ohci-pci
[ 29.956345] usb 1-4: device not accepting address 5, error -32
[ 30.126467] usb 1-4: new full-speed USB device number 6 using ohci-pci
[ 30.546739] usb 1-4: device not accepting address 6, error -32
[ 30.546757] usb usb1-port4: unable to enumerate USB device
[ 30.546859] usb 1-3: USB disconnect, device number 2
[ 30.547094] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 30.547101] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 9
[ 30.547104] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 30.547112] ehci-pci 0000:00:12.2: debug port 1
[ 30.547141] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
[ 30.666834] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[ 30.686831] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 30.687146] hub 9-0:1.0: USB hub found
[ 30.687157] hub 9-0:1.0: 5 ports detected
[ 30.687299] hub 1-0:1.0: USB hub found
[ 30.687311] hub 1-0:1.0: 5 ports detected
[ 30.687525] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 30.687530] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 10
[ 30.687532] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 30.687540] ehci-pci 0000:00:13.2: debug port 1
[ 30.687557] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe607000
[ 30.826917] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 30.827233] hub 10-0:1.0: USB hub found
[ 30.827244] hub 10-0:1.0: 5 ports detected
[ 30.827375] hub 2-0:1.0: USB hub found
[ 30.827386] hub 2-0:1.0: 5 ports detected
[ 30.827633] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 30.827638] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 11
[ 30.827640] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 30.827647] ehci-pci 0000:00:16.2: debug port 1
[ 30.827666] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe604000
[ 30.846876] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 30.847033] hub 11-0:1.0: USB hub found
[ 30.847042] hub 11-0:1.0: 4 ports detected
[ 30.847150] hub 4-0:1.0: USB hub found
[ 30.847160] hub 4-0:1.0: 4 ports detected
[ 30.847497] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 30.858300] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 30.858301] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.858303] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 30.858303] sound hdaudioC0D0: mono: mono_out=0x0
[ 30.858304] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 30.858305] sound hdaudioC0D0: inputs:
[ 30.858307] sound hdaudioC0D0: Front Mic=0x19
[ 30.858310] sound hdaudioC0D0: Rear Mic=0x18
[ 30.858311] sound hdaudioC0D0: Line=0x1a
[ 30.863677] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 30.878863] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb5/5-1/5-1:1.0/0003:045E:0040.0001/input/input5
[ 30.878924] hid-generic 0003:045E:0040.0001: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:02:00.0-1/input0
[ 30.997044] usb 5-2: new low-speed USB device number 3 using xhci_hcd
[ 31.166102] usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 31.181284] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb5/5-2/5-2:1.0/0003:04F2:0116.0002/input/input6
[ 31.181313] hid-generic 0003:04F2:0116.0002: input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:02:00.0-2/input0
[ 31.297234] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[ 31.300679] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 31.347544] Adding 2441876k swap on /dev/sda4. Priority:-1 extents:1 across:2441876k SS
[ 31.593821] uvcvideo: Unable to create debugfs directory
[ 31.593860] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804)
[ 31.609457] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:15.1/0000:06:00.0/usb7/7-1/7-1:1.0/input/input7
[ 31.609570] usbcore: registered new interface driver uvcvideo
[ 31.609572] USB Video Class driver (1.1.1)
[ 31.875582] usb 7-1: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[ 31.875584] usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[ 31.875745] usbcore: registered new interface driver snd-usb-audio
[ 32.247855] usb 1-3: new low-speed USB device number 7 using ohci-pci
[ 32.332642] eth0: 0xffffc90000014000, fc:aa:14:26:64:7d, IRQ 33
[ 35.414265] r8168: eth0: link up
[ 38.026988] nvidia 0000:01:00.0: irq 36 for MSI/MSI-X
[ 47.407735] usb 1-3: device descriptor read/64, error -110
[ 62.677740] usb 1-3: device descriptor read/64, error -110
[ 62.937910] usb 1-3: new low-speed USB device number 8 using ohci-pci
[ 78.117838] usb 1-3: device descriptor read/64, error -110
[ 93.417830] usb 1-3: device descriptor read/64, error -110
[ 93.698013] usb 1-3: new low-speed USB device number 9 using ohci-pci
[ 104.124819] usb 1-3: device not accepting address 9, error -110
[ 104.294933] usb 1-3: new low-speed USB device number 10 using ohci-pci
[ 114.721740] usb 1-3: device not accepting address 10, error -110
[ 114.721777] usb usb1-port3: unable to enumerate USB device
[ 115.051965] usb 1-4: new full-speed USB device number 11 using ohci-pci
[ 115.202065] usb 1-4: device descriptor read/64, error -32
[ 115.462236

[j_c_p]

Strange : I don't have the same motherboard and processor, but all of my usb ports are working

[chithanh]

IOMMU needs to be enabled, or else some mainboard functions will not work properly. If upgrading your kernel to the latest unstable version does not help, iommu=pt kernel parameter may fix at least the r8169 problem.

I recommend that you read the following topics, which discuss problems very similar to what you describe.
Network does not work with Realtek RTL8111/8168/8411 ...
Gigabyte 990FXA-UD3 Installation misery
ethernet module crashes with IOMMU enabled

[venquessa]