Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] black screen, nvidia optimus without bumblebee
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Fdhvdu
n00b
n00b


Joined: 03 Mar 2015
Posts: 10

PostPosted: Sat Mar 07, 2015 10:54 pm    Post subject: [Solved] black screen, nvidia optimus without bumblebee Reply with quote

Update 1, black with _ https://forums.gentoo.org/viewtopic-p-7713790.html#7713790
Update 2, flash a moment https://forums.gentoo.org/viewtopic-p-7713874.html#7713874
Update 3, solution https://forums.gentoo.org/viewtopic-p-7714002.html#7714002

I want to install gnome with systemd.
But, now, after I reboot, it just give me
Quote:
Oh no! Something has gone wrong.

and force me to log out.

My computer is ASUS X750JN laptop with a NVIDIA GT840M graphic card and an intel HD graphics 4600, and CPU is x86_64 (amd64).
I haven't use nouveau.

I find NVIDIA Driver with Optimus Laptops gentoo wiki, and read /usr/share/doc/nvidia-drivers-346.35/README.bz2.
But it doest not work. My question doesn't get any help. Or just I don't know how to do it.

If I use xrandr, it will show me
Quote:
Can't open display

But if I emerge twm and xterm, I could see the window.

Could anyone help me? I have already spend 2 days on this daunting problem... :cry:
Is there anything I should post?

Xorg.0.log | grep EE
Quote:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10257.771] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Invalid argument
[ 10257.784] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 10257.837] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Invalid argument
[ 10257.975] (EE) Server terminated successfully (0). Closing log file.

lspci | grep VGA
Quote:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Where is my NVIDIA VGA?

lspci | grep NVIDIA
Quote:
02:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

/etc/X11/xorg.conf
Quote:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"

# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:2:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

/etc/X11/xorg.conf.d/nvidia.conf
Quote:
Section "Device"
Identifier "nvidia"
Driver "nvidia"
EndSection

/etc/X11/xorg.conf.d/device_no_veda.conf
Quote:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Monitor-LVDS" "Internal Panel"
Option "Monitor-VFA" "External VGA Monitor"
EndSection

Xorg.0.log | grep '\-\-'
Quote:

[ 10257.764] Markers: (--) probed, (**) from config file, (==) default setting,
[ 10257.770] (**) |-->Screen "Screen0" (0)
[ 10257.770] (**) | |-->Monitor "Monitor0"
[ 10257.770] (**) | |-->Device "Device0"
[ 10257.770] (**) |-->Input Device "Keyboard0"
[ 10257.770] (**) |-->Input Device "Mouse0"
[ 10257.772] (--) PCI:*(0:0:2:0) 8086:0416:1043:16fd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 10257.772] (--) PCI: (0:2:0:0) 10de:1341:1043:16fd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10257.780] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 10257.780] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 10257.780] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 10257.780] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 10257.780] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 10257.780] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 10257.780] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[ 10257.781] (--) RandR disabled
[ 10257.822] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10257.822] (--) evdev: Power Button: Found keys
[ 10257.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10257.835] (--) evdev: Video Bus: Found keys
[ 10257.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10257.835] (--) evdev: Video Bus: Found keys
[ 10257.836] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10257.836] (--) evdev: Sleep Button: Found keys
[ 10257.837] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10257.837] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10257.838] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Vendor 0x2 Product 0x1
[ 10257.838] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found 3 mouse buttons
[ 10257.838] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found relative axes
[ 10257.838] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found x and y relative axes

Xorg.0.log | grep WW
Quote:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10257.770] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 10257.770] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 10257.770] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10257.770] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 10257.770] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 10257.770] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 10257.770] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10257.770] (WW) Disabling Keyboard0
[ 10257.770] (WW) Disabling Mouse0
[ 10257.781] (WW) intel(0): Option "Monitor-LVDS" is not used
[ 10257.781] (WW) intel(0): Option "Monitor-VFA" is not used


Last edited by Fdhvdu on Sun Mar 08, 2015 10:22 pm; edited 11 times in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 42596
Location: 56N 3W

PostPosted: Sat Mar 07, 2015 11:19 pm    Post subject: Reply with quote

Fdhvdu,

Welcome to Gentoo.

Optimus Graphics systems give one and a half graphics cards, not two.
The Intel graphics chip can draw images into the pixel buffer and refresh the screen from the pixel buffer.
The nVidia graphics can only draw into the pixel buffer. It has no connection to the display at all.

This means that you must always use the Intel graphics system to refresh the display, regardless of which chip is doing the drawing.

First, get the system working with the Intel graphics alone. Once that works, move on to Optimus.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Fdhvdu
n00b
n00b


Joined: 03 Mar 2015
Posts: 10

PostPosted: Sat Mar 07, 2015 11:45 pm    Post subject: Reply with quote

I use
Quote:
eselect opengl set xorg-x11
mv /etc/X11/xorg.conf.d/nvidia.conf /etc/X11/xorg.conf.d/nvidia
vim /etc/X11/xorg.conf
#Section "Device"
#Identifier "Device0"
#Driver "nvidia"
#VendorName "NVIDIA Corporation"
#BusID "PCI:2:0:0"
#EndSection

and now, it works!!! I can see my desktop.

But xrandr still show me
Quote:
Can't open display

How to solve it?
Thanks.
Back to top
View user's profile Send private message
Fdhvdu
n00b
n00b


Joined: 03 Mar 2015
Posts: 10

PostPosted: Sun Mar 08, 2015 3:51 pm    Post subject: Reply with quote

Ok. Now I follow this http://us.download.nvidia.com/XFree86/Linux-x86_64/343.36/README/randr14.html.
And my startx is black but can see '-' at the left top corner.

lspci | grep 'VGA\|NVIDIA'
Quote:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
02:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

/etc/X11/xorg.conf
Quote:
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection

Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection

Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration"
EndSection

Section "Device"
Identifier "intel"
Driver "modesetting"
EndSection

Section "Screen"
Identifier "intel"
Device "intel"
EndSection

~/.xinitrc
Quote:
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

startx
Quote:
Could not find provider with name modesetting
xinit: connection to X server lost


Last edited by Fdhvdu on Sun Mar 08, 2015 7:03 pm; edited 1 time in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 42596
Location: 56N 3W

PostPosted: Sun Mar 08, 2015 5:45 pm    Post subject: Reply with quote

Fdhvdu,

Your log says
Code:
[ 1577.882] (II) LoadModule: "modesetting"
[ 1577.882] (WW) Warning, couldn't open module modesetting
[ 1577.882] (II) UnloadModule: "modesetting"
[ 1577.882] (II) Unloading modesetting


Your xorg.conf says
Code:
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
EndSection


So you are asking for the modesetting driver to be used on the Intel card but the log says its not there.
Add modesetting to your VIDEO_CARDS in make.conf, so portage will manage it in future.
Then
Code:
 emerge -1 xf86-video-modesetting
to install it without rebuiding the other drivers.

What happens now?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Fdhvdu
n00b
n00b


Joined: 03 Mar 2015
Posts: 10

PostPosted: Sun Mar 08, 2015 5:59 pm    Post subject: Reply with quote

NeddySeagoon,

Originally, I can see "_" in my screen when I use startx.
Now, it flashes a moment and returns back terminal. lol

This is what i did
Quote:
emerge --oneshot xf86-video-modesetting

vim /etc/portage/make.conf
VIDEO_CARDS="intel i965 nvidia modesetting"

emerge -DNu @world
emerge -Dnu @world
roboot

lspci | grep 'VGA\|NVIDIA'
Quote:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
02:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

Also, I change my /etc/X11/xorg.conf to be
http://us.download.nvidia.com/XFree86/Linux-x86_64/343.36/README/randr14.html

Following attachment is execute by user.
The alt+F7 terminal is occupied by rebooting startx. It is totally black.

/etc/X11/xorg.conf
Quote:
...
BusID "PCI:2:0:0"
...

startx
Quote:
xauth: file /home/caesar/.serverauth.618 does not exist


X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.18.7-gentoo x86_64 Gentoo
Current Operating System: Linux quantum 3.18.7-gentoo #5 SMP Sat Mar 7 13:27:03 NST 2015 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-gentoo root=/dev/sdb3 ro rootfstype=ext4 init=/usr/lib/systemd/systemd quiet
Build Date: 07 March 2015 01:45:44PM

Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Mar 8 18:35:23 2015
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
reporting 3 3 17 122
have a master to look out for
adjust shatters 0 1600
need to create shared pixmap 1xinit: connection to X server lost

waiting for X server to shut down .(EE) Server terminated successfully (0). Closing log file.

cat /var/log/Xorg.1.log | grep EE
Quote:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 79.402] (EE) Error systemd-logind returned paused fd for drm node
[ 79.406] (EE) Screen 1 deleted because of no matching config section.
[ 79.406] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 79.406] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 79.406] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 79.406] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 79.406] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 79.708] (EE) AIGLX: reverting to software rendering
[ 79.751] (EE) Error systemd-logind returned paused fd for drm node
[ 81.765] (EE) Server terminated successfully (0). Closing log file.

cat /var/log/Xorg.1.log
Quote:
[ 25.995]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 25.995] X Protocol Version 11, Revision 0
[ 25.995] Build Operating System: Linux 3.18.7-gentoo x86_64 Gentoo
[ 25.995] Current Operating System: Linux quantum 3.18.7-gentoo #5 SMP Sat Mar 7 13:27:03 NST 2015 x86_64
[ 25.995] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-gentoo root=/dev/sdb3 ro rootfstype=ext4 init=/usr/lib/systemd/systemd quiet
[ 25.995] Build Date: 07 March 2015 01:45:44PM
[ 25.995]
[ 25.995] Current version of pixman: 0.32.6
[ 25.995] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.995] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.995] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Mar 8 18:34:29 2015
[ 25.995] (==) Using config file: "/etc/X11/xorg.conf"
[ 25.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.995] (==) ServerLayout "layout"
[ 25.995] (**) |-->Screen "nvidia" (0)
[ 25.995] (**) | |-->Monitor "<default monitor>"
[ 25.995] (**) | |-->Device "nvidia"
[ 25.995] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 25.995] (**) |-->Inactive Device "intel"
[ 25.995] (==) Automatically adding devices
[ 25.995] (==) Automatically enabling devices
[ 25.995] (==) Automatically adding GPU devices
[ 25.995] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 25.995] Entry deleted from font path.
[ 25.995] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.995] Entry deleted from font path.
[ 25.995] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 25.995] Entry deleted from font path.
[ 25.995] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 25.995] Entry deleted from font path.
[ 25.995] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 25.995] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 25.995] Entry deleted from font path.
[ 25.995] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 25.995] (==) FontPath set to:
/usr/share/fonts/misc/
[ 25.995] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 25.995] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.995] (II) Loader magic: 0x85cd20
[ 25.995] (II) Module ABI versions:
[ 25.995] X.Org ANSI C Emulation: 0.4
[ 25.995] X.Org Video Driver: 18.0
[ 25.995] X.Org XInput driver : 21.0
[ 25.995] X.Org Server Extension : 8.0
[ 25.996] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 25.996] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 25.997] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 1
[ 25.997] (EE) Error systemd-logind returned paused fd for drm node
[ 25.997] (II) systemd-logind: releasing fd for 226:1
[ 25.997] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.997] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 25.998] (--) PCI:*(0:0:2:0) 8086:0416:1043:16fd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 25.998] (--) PCI: (0:2:0:0) 10de:1341:1043:16fd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 25.998] (II) LoadModule: "glx"
[ 25.998] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 25.999] (II) Module glx: vendor="X.Org Foundation"
[ 25.999] compiled for 1.16.4, module version = 1.0.0
[ 25.999] ABI class: X.Org Server Extension, version 8.0
[ 25.999] (==) AIGLX enabled
[ 25.999] (II) LoadModule: "nvidia"
[ 25.999] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 25.999] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 25.999] compiled for 4.0.2, module version = 1.0.0
[ 25.999] Module class: X.Org Video Driver
[ 25.999] (II) LoadModule: "modesetting"
[ 25.999] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 25.999] (II) Module modesetting: vendor="X.Org Foundation"
[ 25.999] compiled for 1.16.4, module version = 0.9.0
[ 25.999] Module class: X.Org Video Driver
[ 25.999] ABI class: X.Org Video Driver, version 18.0
[ 25.999] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 25.999] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.999] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.999] (++) using VT number 2

[ 25.999] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 25.999] (II) Loading sub module "fb"
[ 25.999] (II) LoadModule: "fb"
[ 26.000] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 26.000] (II) Module fb: vendor="X.Org Foundation"
[ 26.000] compiled for 1.16.4, module version = 1.0.0
[ 26.000] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.000] (II) Loading sub module "wfb"
[ 26.000] (II) LoadModule: "wfb"
[ 26.000] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 26.000] (II) Module wfb: vendor="X.Org Foundation"
[ 26.000] compiled for 1.16.4, module version = 1.0.0
[ 26.000] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.000] (II) Loading sub module "ramdac"
[ 26.000] (II) LoadModule: "ramdac"
[ 26.000] (II) Module "ramdac" already built-in
[ 26.000] (II) modesetting(1): using drv /dev/dri/card0
[ 26.000] (II) modesetting(G0): using drv /dev/dri/card0
[ 26.000] (EE) Screen 1 deleted because of no matching config section.
[ 26.000] (II) UnloadModule: "modesetting"
[ 26.000] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 26.000] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 26.000] (==) NVIDIA(0): RGB weight 888
[ 26.000] (==) NVIDIA(0): Default visual is TrueColor
[ 26.000] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 26.000] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 26.000] (**) NVIDIA(0): Enabling 2D acceleration
[ 26.000] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 26.000] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 26.000] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 26.000] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 26.000] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 26.001] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 26.002] (II) NVIDIA(0): NVIDIA GPU GeForce 840M (GM108-A) at PCI:2:0:0 (GPU-0)
[ 26.002] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 26.002] (--) NVIDIA(0): VideoBIOS: 82.08.17.00.08
[ 26.002] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 26.002] (--) NVIDIA(0): Valid display device(s) on GeForce 840M at PCI:2:0:0
[ 26.002] (--) NVIDIA(0): none
[ 26.002] (II) NVIDIA(0): Validated MetaModes:
[ 26.002] (II) NVIDIA(0): "NULL"
[ 26.002] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 26.002] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 26.002] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 26.002] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 26.002] (==) modesetting(G0): RGB weight 888
[ 26.002] (==) modesetting(G0): Default visual is TrueColor
[ 26.002] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 26.004] (II) modesetting(G0): Output eDP-1-0 has no monitor section
[ 26.005] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 26.006] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 26.007] (II) modesetting(G0): EDID for output eDP-1-0
[ 26.007] (II) modesetting(G0): Manufacturer: CMN Model: 1728 Serial#: 0
[ 26.007] (II) modesetting(G0): Year: 2011 Week: 50
[ 26.007] (II) modesetting(G0): EDID Version: 1.3
[ 26.007] (II) modesetting(G0): Digital Display Input
[ 26.007] (II) modesetting(G0): Max Image Size [cm]: horiz.: 39 vert.: 22
[ 26.007] (II) modesetting(G0): Gamma: 2.20
[ 26.007] (II) modesetting(G0): No DPMS capabilities specified
[ 26.007] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.007] (II) modesetting(G0): First detailed timing is preferred mode
[ 26.007] (II) modesetting(G0): redX: 0.613 redY: 0.344 greenX: 0.326 greenY: 0.590
[ 26.007] (II) modesetting(G0): blueX: 0.160 blueY: 0.082 whiteX: 0.313 whiteY: 0.329
[ 26.007] (II) modesetting(G0): Manufacturer's mask: 0
[ 26.007] (II) modesetting(G0): Supported detailed timing:
[ 26.007] (II) modesetting(G0): clock: 107.8 MHz Image Size: 382 x 215 mm
[ 26.007] (II) modesetting(G0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1940 h_border: 0
[ 26.007] (II) modesetting(G0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 26.007] (II) modesetting(G0): N173FGE-L23
[ 26.007] (II) modesetting(G0): CMN
[ 26.007] (II) modesetting(G0): N173FGE-L23
[ 26.007] (II) modesetting(G0): EDID (in hex):
[ 26.007] (II) modesetting(G0): 00ffffffffffff000dae281700000000
[ 26.007] (II) modesetting(G0): 32150103802716780a08059d58539729
[ 26.007] (II) modesetting(G0): 15505400000001010101010101010101
[ 26.007] (II) modesetting(G0): 0101010101011c2a405461841a303020
[ 26.007] (II) modesetting(G0): 35007ed71000001a000000fe004e3137
[ 26.007] (II) modesetting(G0): 334647452d4c32332020000000fe0043
[ 26.007] (II) modesetting(G0): 4d4e0a202020202020202020000000fe
[ 26.007] (II) modesetting(G0): 004e3137334647452d4c3233202000e3
[ 26.007] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 26.007] (II) modesetting(G0): Modeline "1600x900"x60.0 107.80 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (55.6 kHz eP)
[ 26.007] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 26.007] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 26.008] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 26.008] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 26.008] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 26.008] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 26.008] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 26.009] (II) modesetting(G0): EDID for output VGA-1-0
[ 26.009] (II) modesetting(G0): EDID for output HDMI-1-0
[ 26.009] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.009] (==) modesetting(G0): DPI set to (96, 96)
[ 26.009] (II) Loading sub module "fb"
[ 26.009] (II) LoadModule: "fb"
[ 26.009] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 26.009] (II) Module fb: vendor="X.Org Foundation"
[ 26.009] compiled for 1.16.4, module version = 1.0.0
[ 26.009] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.009] (II) Loading sub module "shadow"
[ 26.009] (II) LoadModule: "shadow"
[ 26.009] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 26.009] (II) Module shadow: vendor="X.Org Foundation"
[ 26.009] compiled for 1.16.4, module version = 1.1.0
[ 26.009] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.009] (--) Depth 24 pixmap format is 32 bpp
[ 26.009] (==) modesetting(G0): Backing store enabled
[ 26.009] (==) modesetting(G0): Silken mouse enabled
[ 26.009] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.009] (==) modesetting(G0): DPMS enabled
[ 26.009] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 26.277] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 26.277] (II) NVIDIA: access.
[ 26.280] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 26.280] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 26.280] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 26.280] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 26.280] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 26.280] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 26.280] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 26.280] (II) NVIDIA(0): Config Options in the README.
[ 26.280] (II) NVIDIA(0): Setting mode "NULL"
[ 26.299] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 26.304] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 26.304] (==) NVIDIA(0): Backing store enabled
[ 26.304] (==) NVIDIA(0): Silken mouse enabled
[ 26.304] (==) NVIDIA(0): DPMS enabled
[ 26.304] (II) Loading sub module "dri2"
[ 26.304] (II) LoadModule: "dri2"
[ 26.304] (II) Module "dri2" already built-in
[ 26.304] (II) NVIDIA(0): [DRI2] Setup complete
[ 26.304] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 26.304] (--) RandR disabled
[ 26.307] (II) AIGLX: Screen 0 is not DRI2 capable
[ 26.307] (EE) AIGLX: reverting to software rendering
[ 26.320] (II) AIGLX: Loaded and initialized swrast
[ 26.320] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 26.321] (II) modesetting(G0): Damage tracking initialized
[ 26.336] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.336] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.336] (**) Power Button: Applying InputClass "system-keyboard"
[ 26.336] (II) LoadModule: "evdev"
[ 26.336] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 26.336] (II) Module evdev: vendor="X.Org Foundation"
[ 26.336] compiled for 1.16.4, module version = 2.9.1
[ 26.336] Module class: X.Org XInput Driver
[ 26.336] ABI class: X.Org XInput driver, version 21.0
[ 26.337] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 26.337] (II) Using input driver 'evdev' for 'Power Button'
[ 26.337] (**) Power Button: always reports core events
[ 26.337] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 26.337] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.337] (--) evdev: Power Button: Found keys
[ 26.337] (II) evdev: Power Button: Configuring as keyboard
[ 26.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 26.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.337] (**) Option "xkb_rules" "evdev"
[ 26.337] (**) Option "xkb_model" "pc105+inet"
[ 26.337] (**) Option "xkb_layout" "us"
[ 26.337] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 26.349] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 26.349] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.349] (**) Video Bus: Applying InputClass "system-keyboard"
[ 26.349] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 26.349] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.349] (**) Video Bus: always reports core events
[ 26.349] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 26.349] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.349] (--) evdev: Video Bus: Found keys
[ 26.349] (II) evdev: Video Bus: Configuring as keyboard
[ 26.349] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 26.349] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.349] (**) Option "xkb_rules" "evdev"
[ 26.349] (**) Option "xkb_model" "pc105+inet"
[ 26.349] (**) Option "xkb_layout" "us"
[ 26.349] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 26.349] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 26.349] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.350] (**) Video Bus: Applying InputClass "system-keyboard"
[ 26.350] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[ 26.350] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.350] (**) Video Bus: always reports core events
[ 26.350] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 26.350] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.350] (--) evdev: Video Bus: Found keys
[ 26.350] (II) evdev: Video Bus: Configuring as keyboard
[ 26.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:00/input/input3/event3"
[ 26.350] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 26.350] (**) Option "xkb_rules" "evdev"
[ 26.350] (**) Option "xkb_model" "pc105+inet"
[ 26.350] (**) Option "xkb_layout" "us"
[ 26.350] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 26.350] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 26.350] (II) No input driver specified, ignoring this device.
[ 26.350] (II) This device may have been added with another device file.
[ 26.350] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 26.350] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.350] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 26.351] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[ 26.351] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.351] (**) Sleep Button: always reports core events
[ 26.351] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 26.351] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.351] (--) evdev: Sleep Button: Found keys
[ 26.351] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.351] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 26.351] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.351] (**) Option "xkb_rules" "evdev"
[ 26.351] (**) Option "xkb_model" "pc105+inet"
[ 26.351] (**) Option "xkb_layout" "us"
[ 26.351] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 26.351] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.351] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.351] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 30 paused 1
[ 26.351] (EE) Error systemd-logind returned paused fd for drm node
[ 26.351] (II) systemd-logind: releasing fd for 226:1
[ 26.352] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 26.352] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 26.352] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[ 26.352] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 26.352] (**) Logitech USB Optical Mouse: always reports core events
[ 26.352] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 26.352] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 26.352] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 26.352] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 26.352] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 26.352] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 26.352] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 26.352] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 26.352] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 26.352] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0001/input/input9/event6"
[ 26.352] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[ 26.352] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 26.352] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 26.352] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 26.352] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 26.352] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 26.353] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 26.353] (II) No input driver specified, ignoring this device.
[ 26.353] (II) This device may have been added with another device file.
[ 26.353] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 26.353] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.353] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 26.353] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[ 26.353] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.353] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.353] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 26.353] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.353] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.353] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.353] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 26.353] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 26.353] (**) Option "xkb_rules" "evdev"
[ 26.353] (**) Option "xkb_model" "pc105+inet"
[ 26.353] (**) Option "xkb_layout" "us"
[ 26.353] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 26.354] (II) config/udev: Adding input device PS/2 FocalTech FocalTech Touchpad in mouse emulation mode (/dev/input/event7)
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Applying InputClass "evdev pointer catchall"
[ 26.354] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 33 paused 0
[ 26.354] (II) Using input driver 'evdev' for 'PS/2 FocalTech FocalTech Touchpad in mouse emulation mode'
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: always reports core events
[ 26.354] (**) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Device: "/dev/input/event7"
[ 26.354] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Vendor 0x2 Product 0x1
[ 26.354] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found 3 mouse buttons
[ 26.354] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found relative axes
[ 26.354] (--) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found x and y relative axes
[ 26.354] (II) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Configuring as mouse
[ 26.354] (**) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: YAxisMapping: buttons 4 and 5
[ 26.354] (**) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.354] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event7"
[ 26.354] (II) XINPUT: Adding extended input device "PS/2 FocalTech FocalTech Touchpad in mouse emulation mode" (type: MOUSE, id 12)
[ 26.354] (II) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: initialized for relative axes.
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) keeping acceleration scheme 1
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration profile 0
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration factor: 2.000
[ 26.354] (**) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration threshold: 4
[ 26.354] (II) config/udev: Adding input device PS/2 FocalTech FocalTech Touchpad in mouse emulation mode (/dev/input/mouse1)
[ 26.354] (II) No input driver specified, ignoring this device.
[ 26.354] (II) This device may have been added with another device file.
[ 27.026] (II) modesetting(G0): EDID vendor "CMN", prod id 5928
[ 27.026] (II) modesetting(G0): Printing DDC gathered Modelines:
[ 27.026] (II) modesetting(G0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (55.6 kHz eP)
[ 27.027] reporting 3 3 17 122
[ 27.054] have a master to look out for
[ 27.054] adjust shatters 0 1600
[ 27.057] need to create shared pixmap 1(II) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Close
[ 27.546] (II) UnloadModule: "evdev"
[ 27.546] (II) systemd-logind: releasing fd for 13:71
[ 27.559] (II) evdev: AT Translated Set 2 keyboard: Close
[ 27.559] (II) UnloadModule: "evdev"
[ 27.559] (II) systemd-logind: releasing fd for 13:69
[ 27.571] (II) evdev: Logitech USB Optical Mouse: Close
[ 27.571] (II) UnloadModule: "evdev"
[ 27.571] (II) systemd-logind: releasing fd for 13:70
[ 27.583] (II) evdev: Sleep Button: Close
[ 27.583] (II) UnloadModule: "evdev"
[ 27.583] (II) systemd-logind: releasing fd for 13:65
[ 27.589] (II) evdev: Video Bus: Close
[ 27.589] (II) UnloadModule: "evdev"
[ 27.589] (II) systemd-logind: releasing fd for 13:67
[ 27.595] (II) evdev: Video Bus: Close
[ 27.595] (II) UnloadModule: "evdev"
[ 27.595] (II) systemd-logind: releasing fd for 13:68
[ 27.601] (II) evdev: Power Button: Close
[ 27.601] (II) UnloadModule: "evdev"
[ 27.601] (II) systemd-logind: releasing fd for 13:66
[ 27.614] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 28.307] (EE) Server terminated successfully (0). Closing log file.
Back to top
View user's profile Send private message
Fdhvdu
n00b
n00b


Joined: 03 Mar 2015
Posts: 10

PostPosted: Sun Mar 08, 2015 10:20 pm    Post subject: Reply with quote

For those who has black screen and add
Quote:
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

in your /home/.xinitrc.

Please move that in the top of /etc/gdm/Init/Default.
You don't need it anymore in your home directory.

computer: ASUS X750JN laptop, NVIDIA GT 840M, intel HD Graphics 4600
nvidia driver: 346.47
others: systemd


don't forget to
Quote:
emerge xf86-video-modesetting

and add modesetting in your VIEDO_CARDS in make.conf
and
Quote:
emerge -DNnu @world


if you set properly, you could use
Quote:
eselect opengl set nvidia


lspci
Quote:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
02:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)
04:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)


/etc/X11/xorg.conf
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 346.47 (buildmeister@swio-display-x86-rhel47-01) Thu Feb 19 19:19:45 PST 2015

Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection

Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection

Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration"
EndSection

Section "Device"
Identifier "intel"
Driver "modesetting"
EndSection

Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum