Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Did a world update, now kde/X(?) will not start [SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sat Jan 24, 2015 9:22 am    Post subject: Did a world update, now kde/X(?) will not start [SOLVED] Reply with quote

After a world update yesterday, I am no longer able to login. After entering name and password, I return to the login screen.

I tried to change over to xdm (rather than kdm), but I have the same behaviour there.

I'm not sure what this is related to. kdm.log looks like this
Code:
gbm: failed to open any driver (search paths /usr/lib64/dri)
gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi
EGL_MESA_drm_image required.
klauncher(5809) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5803)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(5803)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(EE) Server terminated successfully (0). Closing log file.
gbm: failed to open any driver (search paths /usr/lib64/dri)
gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi
EGL_MESA_drm_image required.
klauncher(5892) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5886)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"


But I'm not sure those are deadly?
There's no errors in Xorg.0.log

xdm log looks like this after a few login tries;
Code:

xdm info (pid 22160): Starting
xdm info (pid 22160): Starting X server on :0

X.Org X Server 1.16.3
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.18.1-gentoo x86_64 Gentoo
Current Operating System: Linux h2 3.18.1-gentoo #1 SMP Sat Jan 3 11:28:31 CET 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-3.18.1-gentoo root=/dev/sda2 ro
Build Date: 23 January 2015  03:16:38PM
 
Current version of pixman: 0.32.6
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 24 09:57:10 2015
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
gbm: failed to open any driver (search paths /usr/lib64/dri)
gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi
EGL_MESA_drm_image required.
xdm info (pid 22188): sourcing /usr/lib64/X11/xdm/Xsetup_0
xdm info (pid 22188): sourcing /usr/lib64/X11/xdm/GiveConsole
xdm info (pid 22206): executing session /usr/lib64/X11/xdm/Xsession
xdm info (pid 22188): sourcing /usr/lib64/X11/xdm/TakeConsole
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 162 requests (131 known processed) with 0 events remaining.
xdm info (pid 22160): Starting X server on :0
1 XSELINUXs still allocated at reset
SCREEN: 0 objects of 352 bytes = 0 total bytes 0 private allocs
DEVICE: 0 objects of 104 bytes = 0 total bytes 0 private allocs
CLIENT: 0 objects of 208 bytes = 0 total bytes 0 private allocs
WINDOW: 0 objects of 80 bytes = 0 total bytes 0 private allocs
PIXMAP: 0 objects of 48 bytes = 0 total bytes 0 private allocs
GC: 0 objects of 88 bytes = 0 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 CURSORs still allocated at reset
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 CURSOR_BITSs still allocated at reset
GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 0 objects, 0 bytes, 0 allocs
xdm info (pid 22232): sourcing /usr/lib64/X11/xdm/Xsetup_0
xdm info (pid 22160): Shutting down
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 162 requests (131 known processed) with 0 events remaining.
xdm info (pid 22160): display :0 is being disabled
(EE) Server terminated successfully (0). Closing log file.
xdm info (pid 22160): Exiting



Currently, I see that kwalletd failed in last nights world update - could this be related? Trying new emerge gives errors that libQtNetwork.so.4 has undefined references to SSLv2_client_method and SSLv2_server_method whatever that is.


Last edited by vespaman on Sun Jan 25, 2015 10:13 am; edited 1 time in total
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sat Jan 24, 2015 11:32 am    Post subject: Reply with quote

Is the login screen X?

If it is, I guess X is working.

Not sure where to look for the problem 8O I cannot find anything extraordinary in the logs.
/var/log/messages just gives me pam_unix session opened for user micke, followed by a pam_cd_connector nox 11 mode, followed by a pam_unix session closed for user micke.
So I'm logged in for a split second. Also if I enter the wrong password, I get the normal failure sequence.


These are the packages that where emerged. I have tried to return to the previous xorg version, as well as mesa, but that did not help.

Any other packages to focus on?

Code:
$ grep "completed emerge" temp
1422020067:  ::: completed emerge (1 of 78) dev-qt/qtchooser-0_p20150102 to /
1422020071:  ::: completed emerge (2 of 78) sys-devel/automake-wrapper-10 to /
1422020090:  ::: completed emerge (3 of 78) sys-devel/patch-2.7.2 to /
1422020145:  ::: completed emerge (1 of 74) dev-libs/libltdl-2.4.5 to /
1422020157:  ::: completed emerge (2 of 74) media-libs/freetype-2.5.5 to /
1422020170:  ::: completed emerge (3 of 74) net-firewall/iptables-1.4.21-r1 to /
1422020174:  ::: completed emerge (4 of 74) net-misc/netifrc-0.3.0 to /
1422020186:  ::: completed emerge (5 of 74) sys-libs/readline-6.3_p8-r2 to /
1422020190:  ::: completed emerge (6 of 74) virtual/perl-Text-ParseWords-3.290.0-r1 to /
1422020193:  ::: completed emerge (7 of 74) virtual/perl-Test-Simple-1.1.2 to /
1422020197:  ::: completed emerge (8 of 74) virtual/perl-Perl-OSType-1.7.0 to /
1422020200:  ::: completed emerge (9 of 74) virtual/perl-Getopt-Long-2.420.0-r1 to /
1422020204:  ::: completed emerge (10 of 74) virtual/perl-ExtUtils-Install-1.670.0 to /
1422020209:  ::: completed emerge (11 of 74) virtual/perl-ExtUtils-CBuilder-0.280.217 to /
1422020284:  ::: completed emerge (12 of 74) dev-libs/openssl-1.0.2 to /
1422020296:  ::: completed emerge (13 of 74) dev-libs/libevent-2.0.22 to /
1422020325:  ::: completed emerge (14 of 74) sys-kernel/gentoo-sources-3.18.3 to /
1422020328:  ::: completed emerge (15 of 74) virtual/perl-Archive-Tar-1.960.0 to /
1422020336:  ::: completed emerge (16 of 74) virtual/perl-JSON-PP-2.272.30 to /
1422020342:  ::: completed emerge (17 of 74) virtual/perl-CPAN-Meta-YAML-0.12.0 to /
1422020347:  ::: completed emerge (18 of 74) virtual/perl-CPAN-Meta-2.140.640 to /
1422020353:  ::: completed emerge (19 of 74) virtual/perl-ExtUtils-ParseXS-3.240.0 to /
1422020359:  ::: completed emerge (20 of 74) virtual/perl-Module-Metadata-1.0.19 to /
1422020365:  ::: completed emerge (21 of 74) virtual/perl-Parse-CPAN-Meta-1.441.400 to /
1422020371:  ::: completed emerge (22 of 74) virtual/perl-Test-Harness-3.330.0 to /
1422020377:  ::: completed emerge (23 of 74) virtual/perl-version-0.990.900 to /
1422020382:  ::: completed emerge (24 of 74) perl-core/Module-Build-0.420.500 to /
1422020386:  ::: completed emerge (25 of 74) virtual/perl-Module-Build-0.420.500-r1 to /
1422020391:  ::: completed emerge (26 of 74) dev-perl/File-MimeInfo-0.260.0 to /
1422020399:  ::: completed emerge (27 of 74) dev-python/setuptools-12.0.3 to /
1422020403:  ::: completed emerge (28 of 74) dev-python/enum34-1.0.4 to /
1422020407:  ::: completed emerge (29 of 74) app-admin/eselect-opengl-1.3.1-r2 to /
1422020446:  ::: completed emerge (30 of 74) dev-python/cryptography-0.7.1-r1 to /
1422020483:  ::: completed emerge (31 of 74) media-gfx/exiv2-0.24-r1 to /
1422020518:  ::: completed emerge (32 of 74) media-libs/gst-plugins-base-0.10.36-r2 to /
1422020539:  ::: completed emerge (33 of 74) sys-apps/grep-2.21-r1 to /
1422020567:  ::: completed emerge (34 of 74) sys-devel/bison-3.0.3-r1 to /
1422021573:  ::: completed emerge (35 of 74) sys-devel/gcc-4.9.2 to /
1422021579:  ::: completed emerge (36 of 74) sys-devel/automake-1.15 to /
1422021603:  ::: completed emerge (37 of 74) app-shells/bash-4.3_p33-r1 to /
1422021922:  ::: completed emerge (38 of 74) sys-devel/llvm-3.5.1 to /
1422021939:  ::: completed emerge (39 of 74) sys-devel/libtool-2.4.5 to /
1422021984:  ::: completed emerge (40 of 74) dev-libs/icu-53.1-r2 to /
1422021992:  ::: completed emerge (41 of 74) sys-process/psmisc-22.21-r1 to /
1422022024:  ::: completed emerge (42 of 74) app-arch/cpio-2.11-r3 to /
1422022031:  ::: completed emerge (43 of 74) media-fonts/font-alias-1.0.3-r1 to /
1422022053:  ::: completed emerge (44 of 74) dev-db/sqlite-3.8.8.1 to /
1422022073:  ::: completed emerge (1 of 29) sys-apps/iproute2-3.18.0 to /
1422022112:  ::: completed emerge (2 of 29) net-misc/curl-7.40.0 to /
1422022192:  ::: completed emerge (3 of 29) net-libs/gnutls-3.3.12 to /
1422022219:  ::: completed emerge (4 of 29) sys-apps/busybox-1.23.0-r1 to /
1422022222:  ::: completed emerge (5 of 29) virtual/rubygems-10 to /
1422022229:  ::: completed emerge (6 of 29) dev-ruby/json-1.8.2-r1 to /
1422022235:  ::: completed emerge (7 of 29) dev-ruby/rdoc-4.1.2-r1 to /
1422022320:  ::: completed emerge (8 of 29) dev-util/cmake-3.1.0 to /
1422022346:  ::: completed emerge (9 of 29) app-text/poppler-0.30.0 to /
1422022369:  ::: completed emerge (10 of 29) sys-apps/util-linux-2.25.2-r2 to /
1422022374:  ::: completed emerge (11 of 29) sys-apps/hwids-20150107 to /
1422022380:  ::: completed emerge (12 of 29) net-misc/dhcpcd-6.6.7 to /
1422022591:  ::: completed emerge (13 of 29) media-libs/mesa-10.4.2 to /
1422022643:  ::: completed emerge (14 of 29) x11-base/xorg-server-1.16.3-r1 to /
1422022727:  ::: completed emerge (15 of 29) media-video/ffmpeg-2.2.12 to /
1422022734:  ::: completed emerge (16 of 29) sys-apps/man-pages-3.78 to /
1422022739:  ::: completed emerge (17 of 29) media-plugins/gst-plugins-meta-1.0-r3 to /
1422022749:  ::: completed emerge (18 of 29) mail-client/thunderbird-bin-31.4.0 to /
1422025887:  ::: completed emerge (1 of 10) www-client/chromium-40.0.2214.85-r1 to /
1422025904:  ::: completed emerge (2 of 10) app-misc/gentoo-0.20.6 to /
1422025943:  ::: completed emerge (3 of 10) net-print/cups-filters-1.0.61 to /
1422025951:  ::: completed emerge (4 of 10) sys-apps/openrc-0.13.8 to /
1422025971:  ::: completed emerge (1 of 5) www-plugins/adobe-flash-11.2.202.438 to /
1422029696:  ::: completed emerge (2 of 5) app-office/libreoffice-4.3.5.2 to /
1422029718:  ::: completed emerge (3 of 5) dev-vcs/git-2.2.2 to /
1422032122:  ::: completed emerge (4 of 5) net-libs/webkit-gtk-2.4.8 to /
1422034050:  ::: completed emerge (5 of 5) net-libs/webkit-gtk-2.4.8-r200 to /
Back to top
View user's profile Send private message
quinn_jones
n00b
n00b


Joined: 14 Dec 2005
Posts: 37
Location: Wilmington, MA, US

PostPosted: Sat Jan 24, 2015 6:24 pm    Post subject: Reply with quote

It looks like you DO have a couple of fatal errors in your kdm.log:

Quote:

gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi


and

Quote:

klauncher(5892) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.


You should focus on those. Make sure dbus is running (/etc/init.d/dbus status) and make sure your kernel is compiled with your radeon video driver or the kernel module is loaded.
Back to top
View user's profile Send private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands

PostPosted: Sat Jan 24, 2015 6:52 pm    Post subject: Reply with quote

Ran into same problem.
I run ~amd64.
The culprit was openssl.
After resyncing I got openssl-1.0.2-r1 and I could start kde again.
Read the changelog of dev-libs/openssl.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download


Last edited by gerard27 on Sat Jan 24, 2015 7:10 pm; edited 1 time in total
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sat Jan 24, 2015 6:53 pm    Post subject: Reply with quote

quinn_jones wrote:
It looks like you DO have a couple of fatal errors in your kdm.log:

Quote:

gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi


OK, during the last hour, I have fixed this one. I needed to add radeonsi to my VIDEO_CARDS.
Quote:

and

Quote:

klauncher(5892) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.


You should focus on those. Make sure dbus is running (/etc/init.d/dbus status) and make sure your kernel is compiled with your radeon video driver or the kernel module is loaded.


dbus is running! (I see it running using ps, and it is started during boot).

Regarding radeon: I have not changed kernel since yesterday (when it all worked), radeon is compiled into the kernel (not module).

The dbus error has been around for some time, so, I am not sure it is related to my current issue.

I have tried starting X with the startx command, also this fails;

Code:

micke@h2 ~ $ startx
hostname: No address associated with name
xauth:  file /home/micke/.serverauth.3085 does not exist


X.Org X Server 1.16.3
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.18.1-gentoo x86_64 Gentoo
Current Operating System: Linux h2 3.18.1-gentoo #1 SMP Sat Jan 3 11:28:31 CET 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-3.18.1-gentoo root=/dev/sda2 ro
Build Date: 24 January 2015  06:15:30PM
 
Current version of pixman: 0.32.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 24 19:43:40 2015
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
/etc/X11/xinit/xinitrc: line 105: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.




Thank you for helping - I have been stuck with this for the better part of the day.
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sat Jan 24, 2015 7:18 pm    Post subject: Reply with quote

gerard82 wrote:
Ran into same problem.
I run ~amd64.
The culprit was openssl.
After resyncing I got openssl-1.0.2-r1 and I could start kde again.
Read the changelog of dev-libs/opensssl.
Gerard.


I'm also on ~amd64, but for me, I had 1.0.2, and got the 1.0.2-r1 when all stopped working.

I tried going back to 1.0.1 but no change. Then I upgraded back to 1.0.2-r1. Still no go.

Is there anything special in the change log that I should pay particular attention to?


Edit: went back to 1.0.1j which I actuall think was what I had first. The 1.0.2 must have been very shortlived. Anyway, I still have the same issues, maybe I need to do some serious rebuild here?
Back to top
View user's profile Send private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands

PostPosted: Sat Jan 24, 2015 7:36 pm    Post subject: Reply with quote

It's the first entry,about breaking ABI of several packages.
It took me also the better part of a day.
One of the things I tried was re-emergeing kdelibs (for kinit4).
The emerge failed.
When I did the sync I noticed the new openssl.
After it installed all worked again,also kdelibs successfully emerged.
Good luck,
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sun Jan 25, 2015 8:06 am    Post subject: Reply with quote

I'm at loss. I have tried;

1. Syncing
2. Rebuilding openssl
3. Rebuilt kdelibs, mesa, xorg-server xf86-video-ati consolekit dbus
4. Rebuilt all packages that where successfully built/installed during the world update
5. Rebuilt xorg-x11 emptytree (560+ packages)

Is there a way to enhance logging? Or am I missing something vital?

I'm on ~amd64. amd R6 r260X graphics card. Box was working just fine.
Kernel 3.18.1 Gentoo (have not recompiled this since some weeks)
startx does not work, not as a user, not as root (after having dont /etc/init.d/xdm stop)
Edit: Apparently, X is running while standing on the login screen. /usr/bin/X can be seen in ps. Not sure why I missed this before. So I guess this means that it is not X in it self that is the cause, but something else, like PAM for instance.

startx says;
Code:
$ startx
hostname: No address associated with name
xauth:  file /home/micke/.serverauth.2674 does not exist


X.Org X Server 1.16.3
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.18.1-gentoo x86_64 Gentoo
Current Operating System: Linux h2 3.18.1-gentoo #1 SMP Sat Jan 3 11:28:31 CET 2015 x86_64
Kernel command line: BOOT_IMAGE=/kernel-3.18.1-gentoo root=/dev/sda2 ro
Build Date: 25 January 2015  02:41:07AM
 
Current version of pixman: 0.32.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 09:02:09 2015
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 105: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.


Xorg.0.log after the modelines;
Code:

[   857.976] (II) RADEON(0): EDID for output HDMI-0
[   857.978] (II) RADEON(0): EDID for output DVI-0
[   857.992] (II) RADEON(0): EDID for output DVI-1
[   857.992] (II) RADEON(0): Output DisplayPort-0 connected
[   857.992] (II) RADEON(0): Output HDMI-0 disconnected
[   857.992] (II) RADEON(0): Output DVI-0 disconnected
[   857.992] (II) RADEON(0): Output DVI-1 disconnected
[   857.992] (II) RADEON(0): Using exact sizes for initial modes
[   857.992] (II) RADEON(0): Output DisplayPort-0 using initial mode 3840x2160
[   857.992] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   857.992] (II) RADEON(0): mem size init: gart size :3fb66000 vram size: s:40000000 visible:3d6cd000
[   857.992] (==) RADEON(0): DPI set to (96, 96)
[   857.992] (II) Loading sub module "fb"
[   857.992] (II) LoadModule: "fb"
[   857.992] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   857.992] (II) Module fb: vendor="X.Org Foundation"
[   857.992]    compiled for 1.16.3, module version = 1.0.0
[   857.992]    ABI class: X.Org ANSI C Emulation, version 0.4
[   857.992] (II) Loading sub module "ramdac"
[   857.992] (II) LoadModule: "ramdac"
[   857.992] (II) Module "ramdac" already built-in
[   857.992] (--) Depth 24 pixmap format is 32 bpp
[   857.992] (II) RADEON(0): [DRI2] Setup complete
[   857.992] (II) RADEON(0): [DRI2]   DRI driver: radeonsi
[   857.992] (II) RADEON(0): [DRI2]   VDPAU driver: radeonsi
[   857.992] (II) RADEON(0): Front buffer size: 32640K
[   857.992] (II) RADEON(0): VRAM usage limit set to 876286K
[   857.992] (==) RADEON(0): Backing store enabled
[   857.992] (II) RADEON(0): Direct rendering enabled
[   858.038] (II) RADEON(0): Use GLAMOR acceleration.
[   858.038] (II) RADEON(0): Acceleration enabled
[   858.038] (==) RADEON(0): DPMS enabled
[   858.038] (==) RADEON(0): Silken mouse enabled
[   858.039] (II) RADEON(0): Set up textured video (glamor)
[   858.039] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[   858.039] (II) RADEON(0): [XvMC] Extension initialized.
[   858.039] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   858.039] (--) RandR disabled
[   858.043] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   858.043] (II) AIGLX: enabled GLX_ARB_create_context
[   858.043] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   858.043] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   858.043] (II) AIGLX: enabled GLX_INTEL_swap_event
[   858.043] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   858.043] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   858.043] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   858.043] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   858.043] (II) AIGLX: Loaded and initialized radeonsi
[   858.043] (II) GLX: Initialized DRI2 GL provider for screen 0
[   858.062] (II) RADEON(0): Setting screen physical size to 1016 x 571
[   858.110] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   858.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   858.110] (II) LoadModule: "evdev"
[   858.110] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   858.110] (II) Module evdev: vendor="X.Org Foundation"
[   858.110]    compiled for 1.16.3, module version = 2.9.1
[   858.110]    Module class: X.Org XInput Driver
[   858.110]    ABI class: X.Org XInput driver, version 21.0
[   858.110] (II) Using input driver 'evdev' for 'Power Button'
[   858.110] (**) Power Button: always reports core events
[   858.110] (**) evdev: Power Button: Device: "/dev/input/event1"
[   858.110] (--) evdev: Power Button: Vendor 0 Product 0x1
[   858.110] (--) evdev: Power Button: Found keys
[   858.110] (II) evdev: Power Button: Configuring as keyboard
[   858.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   858.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   858.110] (**) Option "xkb_rules" "evdev"
[   858.110] (**) Option "xkb_model" "pc104"
[   858.110] (**) Option "xkb_layout" "us"
[   858.120] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[   858.120] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   858.120] (II) Using input driver 'evdev' for 'Video Bus'
[   858.120] (**) Video Bus: always reports core events
[   858.120] (**) evdev: Video Bus: Device: "/dev/input/event12"
[   858.120] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   858.120] (--) evdev: Video Bus: Found keys
[   858.120] (II) evdev: Video Bus: Configuring as keyboard
[   858.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12"
[   858.120] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   858.120] (**) Option "xkb_rules" "evdev"
[   858.120] (**) Option "xkb_model" "pc104"
[   858.120] (**) Option "xkb_layout" "us"
[   858.120] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   858.120] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   858.120] (II) Using input driver 'evdev' for 'Power Button'
[   858.120] (**) Power Button: always reports core events
[   858.120] (**) evdev: Power Button: Device: "/dev/input/event0"
[   858.120] (--) evdev: Power Button: Vendor 0 Product 0x1
[   858.120] (--) evdev: Power Button: Found keys
[   858.120] (II) evdev: Power Button: Configuring as keyboard
[   858.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   858.120] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   858.120] (**) Option "xkb_rules" "evdev"
[   858.120] (**) Option "xkb_model" "pc104"
[   858.120] (**) Option "xkb_layout" "us"
[   858.120] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event2)
[   858.120] (II) No input driver specified, ignoring this device.
[   858.120] (II) This device may have been added with another device file.
[   858.120] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event3)
[   858.121] (II) No input driver specified, ignoring this device.
[   858.121] (II) This device may have been added with another device file.
[   858.121] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event4)
[   858.121] (II) No input driver specified, ignoring this device.
[   858.121] (II) This device may have been added with another device file.
[   858.121] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event5)
[   858.121] (II) No input driver specified, ignoring this device.
[   858.121] (II) This device may have been added with another device file.
[   858.121] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event6)
[   858.121] (II) No input driver specified, ignoring this device.
[   858.121] (II) This device may have been added with another device file.
[   858.121] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event7)
[   858.121] (II) No input driver specified, ignoring this device.
[   858.121] (II) This device may have been added with another device file.
[   858.121] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event13)
[   858.121] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[   858.121] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[   858.121] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[   858.121] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event13"
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[   858.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:045E:00DB.0001/input/input15/event13"
[   858.121] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 9)
[   858.121] (**) Option "xkb_rules" "evdev"
[   858.121] (**) Option "xkb_model" "pc104"
[   858.121] (**) Option "xkb_layout" "us"
[   858.121] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event14)
[   858.121] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[   858.121] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[   858.121] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[   858.121] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event14"
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing relative x/y axes to exist.
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing absolute x/y axes to exist.
[   858.121] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[   858.121] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Adding scrollwheel support
[   858.121] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
[   858.121] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   858.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.1/0003:045E:00DB.0002/input/input16/event14"
[   858.121] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 10)
[   858.121] (**) Option "xkb_rules" "evdev"
[   858.121] (**) Option "xkb_model" "pc104"
[   858.121] (**) Option "xkb_layout" "us"
[   858.122] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: initialized for relative axes.
[   858.122] (WW) evdev: Microsoft Natural® Ergonomic Keyboard 4000: ignoring absolute axes.
[   858.122] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
[   858.122] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
[   858.122] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[   858.122] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[   858.122] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/event15)
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[   858.122] (II) Using input driver 'evdev' for 'B16_b_02 USB-PS/2 Optical Mouse'
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: always reports core events
[   858.122] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: Device: "/dev/input/event15"
[   858.122] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc024
[   858.122] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found 8 mouse buttons
[   858.122] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found scroll wheel(s)
[   858.122] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found relative axes
[   858.122] (--) evdev: B16_b_02 USB-PS/2 Optical Mouse: Found x and y relative axes
[   858.122] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: Configuring as mouse
[   858.122] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: Adding scrollwheel support
[   858.122] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[   858.122] (**) evdev: B16_b_02 USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   858.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.0/0003:046D:C024.0003/input/input17/event15"
[   858.122] (II) XINPUT: Adding extended input device "B16_b_02 USB-PS/2 Optical Mouse" (type: MOUSE, id 11)
[   858.122] (II) evdev: B16_b_02 USB-PS/2 Optical Mouse: initialized for relative axes.
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[   858.122] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[   858.122] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/mouse0)
[   858.122] (II) No input driver specified, ignoring this device.
[   858.122] (II) This device may have been added with another device file.
[   858.122] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[   858.122] (II) No input driver specified, ignoring this device.
[   858.122] (II) This device may have been added with another device file.
[   858.122] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[   858.122] (II) No input driver specified, ignoring this device.
[   858.122] (II) This device may have been added with another device file.
[   858.122] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[   858.122] (II) No input driver specified, ignoring this device.
[   858.122] (II) This device may have been added with another device file.
[   858.122] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[   858.122] (II) No input driver specified, ignoring this device.
[   858.122] (II) This device may have been added with another device file.
[   859.628] (II) AIGLX: Suspending AIGLX clients for VT switch


kdm.log before entering password;
Code:

klauncher(13307) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(13301)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(13301)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(II) AIGLX: Suspending AIGLX clients for VT switch


kdm.log after entering correct password;
Code:

(EE) Server terminated successfully (0). Closing log file.
klauncher(2520) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2514)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2514)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(II) AIGLX: Suspending AIGLX clients for VT switch


So basically, I get a "(EE) Server terminated successfully (0). Closing log file." when trying to log in.

Now, looking in old logfiles, those errors (and more!) has been present since a long time. And indeed, also on the box where I am typing this, I have the same errors;
Code:
klauncher(4389) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(4372)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(4372)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
kdmgreet: Fatal IO error: client killed
(EE) Server terminated successfully (0). Closing log file.
klauncher(2193) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2187)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2187)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server



This is driving me crazy
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Sun Jan 25, 2015 10:13 am    Post subject: Reply with quote

OMG!

I have just spent 1,5 day for this shitty shitty thing.

After googling even more, I found this;

Quote:
OR -- I did some googling on this. Check your session type before you log in. Apparently if it's set to "failsafe", it will exhibit this behavior. Not very failsafe, eh? You want it set to "plasma desktop", or whatever it's called now -- I don't have any way of checking it while logged in.



Turns out that this was what was missing - the session radio button must be plasma, not failsafe, not unselected, indeed not anything but plasma. :twisted:

I should have seen and understood the nox11 pam argument in the logs.
Back to top
View user's profile Send private message
steveL
Watchman
Watchman


Joined: 13 Sep 2006
Posts: 5153
Location: The Peanut Gallery

PostPosted: Mon Jan 26, 2015 7:50 am    Post subject: Reply with quote

Ouch. Oh well, you got there in the end.
vespaman wrote:
Turns out that this was what was missing - the session radio button must be plasma, not failsafe, not unselected, indeed not anything but plasma.

That's weird; what's the point in having it then? (Not that we should get rid of it; just make it work correctly.)
Quote:
I should have seen and understood the nox11 pam argument in the logs.

I couldn't see that in any of the earlier posts. Which log was it in?
Back to top
View user's profile Send private message
vespaman
Guru
Guru


Joined: 28 Aug 2002
Posts: 309
Location: Stockholm, Sweden

PostPosted: Mon Jan 26, 2015 10:26 am    Post subject: Reply with quote

steveL wrote:
Ouch. Oh well, you got there in the end.
vespaman wrote:
Turns out that this was what was missing - the session radio button must be plasma, not failsafe, not unselected, indeed not anything but plasma.

That's weird; what's the point in having it then? (Not that we should get rid of it; just make it work correctly.)
Quote:
I should have seen and understood the nox11 pam argument in the logs.

I couldn't see that in any of the earlier posts. Which log was it in?


The irony is that I actually tested to change session to all *but* Plasma, since I assumed that was where I started. I guess something in the world update reset this radio button. You gotta love the term "Fail Safe" :D

I found this in /var/log/messages, but as it was only an argument on a normal informational login granted message for pam (not any sort of error), I did not pay attention to it. So Pam granted access, just not to X.
Back to top
View user's profile Send private message
steveL
Watchman
Watchman


Joined: 13 Sep 2006
Posts: 5153
Location: The Peanut Gallery

PostPosted: Tue Jan 27, 2015 3:17 am    Post subject: Reply with quote

vespaman wrote:
You gotta love the term "Fail Safe" :D

Lol, indeed :-)

I've always seen it as "start minimal X" though I haven't used it in years.

Not good if it completely fails, given that it's software from KDE, starting KDE failsafe. Have you tried filing a bug upstream? They're quite pleasant ime. (It may already have been reported.)
Quote:
I found this in /var/log/messages, but as it was only an argument on a normal informational login granted message for pam (not any sort of error), I did not pay attention to it. So Pam granted access, just not to X.

OK nice one; so it was pam logging a "nox11" access, in /var/log/messages should we hit it again.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum