| View previous topic :: View next topic |
| Author |
Message |
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
 Posted: Sun Jan 11, 2015 7:39 am Post subject: STARTX Failure :( |
 |
|
So, for the past 5 hours now I've tried getting everything too work with startx, originally it was due too me not having the intel driver, which I soon fixed. Now startx /will not/ find my monitor, and refuses too start.
~# lspci | grep VGA
| Quote: |
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
|
Xorg.log
| Code: |
[ 153.279]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 153.280] X Protocol Version 11, Revision 0
[ 153.280] Build Operating System: Linux 3.17.7-gentoo x86_64 Gentoo
[ 153.280] Current Operating System: Linux rylor 3.17.7-gentoo #2 SMP Sat Jan 10 14:15:17 PST 2015 x86_64
[ 153.280] Kernel command line: root=/dev/ram0 crypt_root=/dev/disk/by-partuuid/dc218661-5389-481f-88da-1ca44b20c411 dolvm real_root=/dev/mapper/vg1-root rootfstype=ext4 real_init=/usr/lib/systemd/systemd root_keydev=/dev/disk/by-partuuid/10a074b2-f59b-4df5-bd12-60f5022e7673 root_key=luks-key.gpg real_resume=/dev/mapper/vg1-swap keymap=us
[ 153.280] Build Date: 10 January 2015 05:10:50PM
[ 153.280]
[ 153.280] Current version of pixman: 0.32.4
[ 153.280] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 153.280] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 153.280] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 10 23:29:03 2015
[ 153.280] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 153.280] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 153.280] (==) No Layout section. Using the first Screen section.
[ 153.280] (==) No screen section available. Using defaults.
[ 153.280] (**) |-->Screen "Default Screen Section" (0)
[ 153.280] (**) | |-->Monitor "<default monitor>"
[ 153.280] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 153.280] (**) | |-->Device "Device0"
[ 153.280] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 153.280] (==) Automatically adding devices
[ 153.280] (==) Automatically enabling devices
[ 153.280] (==) Automatically adding GPU devices
[ 153.280] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 153.280] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 153.280] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 153.280] (II) Loader magic: 0x801c60
[ 153.280] (II) Module ABI versions:
[ 153.280] X.Org ANSI C Emulation: 0.4
[ 153.280] X.Org Video Driver: 15.0
[ 153.280] X.Org XInput driver : 20.0
[ 153.280] X.Org Server Extension : 8.0
[ 153.281] (--) PCI:*(0:0:2:0) 8086:0a16:103c:227f rev 11, Mem @ 0xb2000000/4194304, 0xa0000000/268435456, I/O @ 0x00006000/64
[ 153.281] Initializing built-in extension Generic Event Extension
[ 153.281] Initializing built-in extension SHAPE
[ 153.281] Initializing built-in extension MIT-SHM
[ 153.281] Initializing built-in extension XInputExtension
[ 153.281] Initializing built-in extension XTEST
[ 153.281] Initializing built-in extension BIG-REQUESTS
[ 153.281] Initializing built-in extension SYNC
[ 153.281] Initializing built-in extension XKEYBOARD
[ 153.281] Initializing built-in extension XC-MISC
[ 153.281] Initializing built-in extension XINERAMA
[ 153.281] Initializing built-in extension XFIXES
[ 153.281] Initializing built-in extension RENDER
[ 153.281] Initializing built-in extension RANDR
[ 153.281] Initializing built-in extension COMPOSITE
[ 153.281] Initializing built-in extension DAMAGE
[ 153.281] Initializing built-in extension MIT-SCREEN-SAVER
[ 153.281] Initializing built-in extension DOUBLE-BUFFER
[ 153.281] Initializing built-in extension RECORD
[ 153.281] Initializing built-in extension DPMS
[ 153.281] Initializing built-in extension Present
[ 153.281] Initializing built-in extension DRI3
[ 153.281] Initializing built-in extension X-Resource
[ 153.281] Initializing built-in extension XVideo
[ 153.281] Initializing built-in extension XVideo-MotionCompensation
[ 153.281] Initializing built-in extension XFree86-VidModeExtension
[ 153.281] Initializing built-in extension XFree86-DGA
[ 153.281] Initializing built-in extension XFree86-DRI
[ 153.281] Initializing built-in extension DRI2
[ 153.281] (II) LoadModule: "glx"
[ 153.281] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 153.282] (II) Module glx: vendor="X.Org Foundation"
[ 153.282] compiled for 1.15.2, module version = 1.0.0
[ 153.282] ABI class: X.Org Server Extension, version 8.0
[ 153.282] (==) AIGLX enabled
[ 153.282] Loading extension GLX
[ 153.282] (II) LoadModule: "intel"
[ 153.282] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 153.282] (II) Module intel: vendor="X.Org Foundation"
[ 153.282] compiled for 1.15.2, module version = 2.21.15
[ 153.282] Module class: X.Org Video Driver
[ 153.282] ABI class: X.Org Video Driver, version 15.0
[ 153.282] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 153.282] (--) using VT number 2
[ 153.286] (EE) No devices detected.
[ 153.286] (EE)
Fatal server error:
[ 153.286] (EE) no screens found(EE)
[ 153.286] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 153.286] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 153.286] (EE)
|
cat /proc/fb
/etc/portage/make.conf
| Code: |
cat /etc/portage/make.conf
# Build setup as of <add current date>
# C and C++ compiler options for GCC.
CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# Note: MAKEOPTS and EMERGE_DEFAULT_OPTS are set in .bashrc
# Only free software, please.
ACCEPT_LICENSE="-* @FREE"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# Use the 'stable' branch - 'testing' no longer required for Gnome 3.
ACCEPT_KEYWORDS="--amd64"
# Additional USE flags in addition to those specified by the current profile.
USE="sse3 ssse3 sse4 avx avx2"
# Important Portage directories.
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
# Turn on logging - see http://gentoo-en.vfose.ru/wiki/Gentoo_maintenance.
PORTAGE_ELOG_CLASSES="info warn error log qa"
PORTAGE_ELOG_SYSTEM="save"
# Logs go to /var/log/portage/elog by default - view them with elogviewer.
# Settings for X11
VIDEO_CARDS="intel i915"
INPUT_DEVICES="evdev synaptics"
GENTOO_MIRRORS="ftp://ftp.ucsb.edu/pub/mirrors/linux/gentoo/"
source "/var/lib/layman/make.conf"
|
~# uname -a
| Quote: |
Linux rylor 3.17.7-gentoo #2 SMP Sat Jan 10 14:15:17 PST 2015 x86_64 Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz GenuineIntel GNU/Linux
|
I can provide anything else needed! I *really* need to get his up and running as soon as possible, and any help is appreciated. I've looked into it for hours and am just lost at this point! |
|
| Back to top |
|
 |
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Sun Jan 11, 2015 9:29 am Post subject: Re: STARTX Failure :( |
|
|
| RainbowDashDC wrote: | | Code: | cat /proc/fb
0 EFI VGA |
|
RainbowDashDC ... it looks to me as though you are missing inteldrmfb in the kernel ...
| Code: | cat /proc/fb
0 inteldrmfb |
So, enable CONFIG_AGP, CONFIG_AGP_INTEL, CONFIG_DRM, CONFIG_DRM_I915, CONFIG_DRM_I915_KMS, CONFIG_DRM_I915_FBDEV ... you should also disable any other framebuffer, though CONFIG_FB_EFI shouldn't cause any harm (it is safe to disable it however).
best ... khay |
|
| Back to top |
|
|
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
|
| Back to top |
|
|
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Sun Jan 11, 2015 10:22 am Post subject: |
|
|
| krinn wrote: | | VIDEO_CARDS="intel i965" |
krinn ... good call, missed that.
best ... khay |
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 4:29 pm Post subject: |
|
|
| I've done both of those, but it doesn't work still :s |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
| Posted: Sun Jan 11, 2015 4:44 pm Post subject: |
|
|
Do you have KMS enabled in your kernel. As you can see below your X exits where my X goes KMS.
| Code: | [1070569.956] (--) using VT number 7
[1070569.970] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[1070569.972] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
|
_________________
My Gentoo installation notes.
Please learn how to denote units correctly! |
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 5:35 pm Post subject: |
|
|
| Jaglover wrote: | Do you have KMS enabled in your kernel. As you can see below your X exits where my X goes KMS.
| Code: | [1070569.956] (--) using VT number 7
[1070569.970] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[1070569.972] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
|
|
I believe so, but could you clarify the steps to do so if they differ from what people told me to enable in the kernel already?
I already had the KMS intel one enabled and the framebuffer devices, so really confused why it wouldn't be at this point |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 6:13 pm Post subject: |
|
|
| Jaglover wrote: | | You are not running the kernel you think you are, DRM is disabled in your running kernel. |
This is odd then.. I'm using http://wiki.gentoo.org/wiki/Sakaki%27s_EFI_Install_Guide and I feel like this may be part of the problem |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 6:26 pm Post subject: |
|
|
| Jaglover wrote: | | Can't help here, there are several ways to set up UEFI boot, you have to do what is needed to update/upgrade the kernel image for your setup. |
It's not the EFI issue, it seems to be the buildkernel script I'm using to work it, or... Wait, no, it's an old kernel being on the USB I am 50% sure this is because of me leaving an old kernel on it |
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 6:40 pm Post subject: |
|
|
Haha, It was. I was bootin my old kernel I used at first w/o intel drivers.
/proc/fb
0 inteldrmfb
/var/log/Xorg.log
https://bpaste.net/show/5be96461299e
lspci -k
| Quote: | 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Hewlett-Packard Company Device 227f
Kernel driver in use: i915 |
However, x still fails too start.
Last edited by RainbowDashDC on Sun Jan 11, 2015 6:43 pm; edited 2 times in total |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 6:42 pm Post subject: |
|
|
| Jaglover wrote: | | Pastebin your new Xorg log? |
See edit |
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 6:45 pm Post subject: |
|
|
Fixed!
devices_no_vesa.conf from the intel page which I used earlier was causing modules to not be used on x, but now they are and evyerthing seems too be work! |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
RainbowDashDC
n00b
Joined: 11 Jan 2015
Posts: 10
|
| Posted: Sun Jan 11, 2015 7:00 pm Post subject: |
|
|
To overal recap, incase someone else has this:
When using buildkernel by the guide it says too use bootx64.efi at first which will most likely not have the intel drivers yet, then it switches to gentoo.efi later on. On my machine it did NOT update to use the gentoo.efi file later on, make sure you change your system too use the gentoo.efi instead of bootx64.efi.
Also, with my GPU devices_no_vesa.conf breaks x to not use fbdev and vesa.
Regardless, thank you all for the help! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
And thanks for posting the solution.