Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
startx won't start on nvidia card
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 6:16 pm    Post subject: startx won't start on nvidia card Reply with quote

hi, all

I have met a problem for my new desktop, and I can't startx, here is my environment as below.

Hardware
Code:

anima ~ # lspci |grep VGA
03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)


Nvidia Driver
Code:

anima ~ # equery list nvidia-drivers
 * Searching for nvidia-drivers ...
[IP-] [  ] x11-drivers/nvidia-drivers-343.22-r2:0


Xorg.conf
Code:

anima ~ # cat /etc/X11/xorg.conf
Section "Device"
   Identifier "nvidia"
   Driver      "nvidia"
EndSection


others
Code:

anima ~ # lsmod
Module                  Size  Used by
nvidia              11010194  0
x86_pkg_temp_thermal     4535  0
e1000e                160315  0


I could start X -retro works fine, I could control mouse and move it on screen.

Problems:
Code:

anima ~ # glxinfo
Error: unable to open display



Any ideas?

Thank you and any comments or thought will be highly appricated.

Regards

roro
_________________
I am linux fan.
Back to top
View user's profile Send private message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 6:22 pm    Post subject: Kernel settings and make.conf Reply with quote

For kernel,
I follow the setting in gentoo nvidia menual, no framebuffer driver(except VESA VGA graphics support), no nouveau, enable AGPGART.

make.conf
Code:

anima linux # cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=corei7-avx -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="-qt4 -kde X dbus gtk gnome dvd alsa cdr mmx sse sse2"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"

MAKEOPTS="-j5"

#GRUB_PLATFORMS="emu efi-32 efi-64 pc"

CCACHE_SIZE="2G"

## (For mouse, keyboard)
INPUT_DEVICES="evdev"
## (For nVidia cards)
VIDEO_CARDS="nvidia"

GENTOO_MIRRORS="rsync://rsync.gtlib.gatech.edu/gentoo http://www.gtlib.gatech.edu/pub/gentoo ftp://ftp.gtlib.gatech.edu/pub/gentoo"

_________________
I am linux fan.
Back to top
View user's profile Send private message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 7:17 pm    Post subject: gnome error Reply with quote

When I startx, then there is error screen displayed.

'Oh no! Something has gone wrong'

and one 'Log Out' button.

Code:

 cat /var/log/Xorg.0.log
[  8518.407]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[  8518.407] X Protocol Version 11, Revision 0
[  8518.407] Build Operating System: Linux 3.16.5-gentoo x86_64 Gentoo
[  8518.407] Current Operating System: Linux anima 3.16.5-gentoo #8 SMP Thu Nov 13 10:53:43 EST 2014 x86_64
[  8518.407] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.5-gentoo root=/dev/sda4 ro
[  8518.407] Build Date: 12 November 2014  06:14:07PM
[  8518.407] 
[  8518.407] Current version of pixman: 0.32.4
[  8518.408]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[  8518.408] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  8518.408] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 13 14:10:43 2014
[  8518.408] (==) Using config file: "/etc/X11/xorg.conf"
[  8518.408] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  8518.408] (==) No Layout section.  Using the first Screen section.
[  8518.408] (==) No screen section available. Using defaults.
[  8518.408] (**) |-->Screen "Default Screen Section" (0)
[  8518.408] (**) |   |-->Monitor "<default monitor>"
[  8518.408] (==) No device specified for screen "Default Screen Section".
   Using the first device section listed.
[  8518.408] (**) |   |-->Device "nvidia"
[  8518.408] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[  8518.408] (==) Automatically adding devices
[  8518.408] (==) Automatically enabling devices
[  8518.408] (==) Automatically adding GPU devices
[  8518.408] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[  8518.408]    Entry deleted from font path.
[  8518.408] (==) FontPath set to:
   
[  8518.408] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  8518.408] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[  8518.408] (II) Loader magic: 0x800c60
[  8518.408] (II) Module ABI versions:
[  8518.408]    X.Org ANSI C Emulation: 0.4
[  8518.408]    X.Org Video Driver: 15.0
[  8518.408]    X.Org XInput driver : 20.0
[  8518.408]    X.Org Server Extension : 8.0
[  8518.408] (II) xfree86: Adding drm device (/dev/dri/card0)
[  8518.410] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xee000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  8518.410] Initializing built-in extension Generic Event Extension
[  8518.410] Initializing built-in extension SHAPE
[  8518.410] Initializing built-in extension MIT-SHM
[  8518.410] Initializing built-in extension XInputExtension
[  8518.410] Initializing built-in extension XTEST
[  8518.410] Initializing built-in extension BIG-REQUESTS
[  8518.410] Initializing built-in extension SYNC
[  8518.410] Initializing built-in extension XKEYBOARD
[  8518.410] Initializing built-in extension XC-MISC
[  8518.410] Initializing built-in extension XINERAMA
[  8518.410] Initializing built-in extension XFIXES
[  8518.410] Initializing built-in extension RENDER
[  8518.410] Initializing built-in extension RANDR
[  8518.410] Initializing built-in extension COMPOSITE
[  8518.410] Initializing built-in extension DAMAGE
[  8518.410] Initializing built-in extension MIT-SCREEN-SAVER
[  8518.410] Initializing built-in extension DOUBLE-BUFFER
[  8518.410] Initializing built-in extension RECORD
[  8518.410] Initializing built-in extension DPMS
[  8518.410] Initializing built-in extension Present
[  8518.410] Initializing built-in extension DRI3
[  8518.410] Initializing built-in extension X-Resource
[  8518.410] Initializing built-in extension XVideo
[  8518.410] Initializing built-in extension XVideo-MotionCompensation
[  8518.410] Initializing built-in extension XFree86-VidModeExtension
[  8518.410] Initializing built-in extension XFree86-DGA
[  8518.411] Initializing built-in extension XFree86-DRI
[  8518.411] Initializing built-in extension DRI2
[  8518.411] (II) LoadModule: "glx"
[  8518.411] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  8518.418] (II) Module glx: vendor="NVIDIA Corporation"
[  8518.418]    compiled for 4.0.2, module version = 1.0.0
[  8518.418]    Module class: X.Org Server Extension
[  8518.418] (II) NVIDIA GLX Module  343.22  Thu Sep 11 15:55:13 PDT 2014
[  8518.418] Loading extension GLX
[  8518.418] (II) LoadModule: "nvidia"
[  8518.419] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[  8518.419] (II) Module nvidia: vendor="NVIDIA Corporation"
[  8518.419]    compiled for 4.0.2, module version = 1.0.0
[  8518.419]    Module class: X.Org Video Driver
[  8518.419] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[  8518.419] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  8518.419] (--) using VT number 7

[  8518.515] (II) Loading sub module "fb"
[  8518.515] (II) LoadModule: "fb"
[  8518.516] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  8518.516] (II) Module fb: vendor="X.Org Foundation"
[  8518.516]    compiled for 1.15.0, module version = 1.0.0
[  8518.516]    ABI class: X.Org ANSI C Emulation, version 0.4
[  8518.516] (II) Loading sub module "wfb"
[  8518.516] (II) LoadModule: "wfb"
[  8518.516] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[  8518.516] (II) Module wfb: vendor="X.Org Foundation"
[  8518.516]    compiled for 1.15.0, module version = 1.0.0
[  8518.516]    ABI class: X.Org ANSI C Emulation, version 0.4
[  8518.516] (II) Loading sub module "ramdac"
[  8518.516] (II) LoadModule: "ramdac"
[  8518.516] (II) Module "ramdac" already built-in
[  8518.517] (II) NVIDIA(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[  8518.517] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  8518.517] (==) NVIDIA(0): RGB weight 888
[  8518.517] (==) NVIDIA(0): Default visual is TrueColor
[  8518.517] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  8518.517] (**) NVIDIA(0): Enabling 2D acceleration
[  8518.963] (II) NVIDIA(0): Display (DELL P2414H (DFP-0)) does not support NVIDIA 3D
[  8518.963] (II) NVIDIA(0):     Vision stereo.
[  8518.963] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[  8518.964] (II) NVIDIA(0): NVIDIA GPU Quadro 600 (GF108GL) at PCI:3:0:0 (GPU-0)
[  8518.964] (--) NVIDIA(0): Memory: 1048576 kBytes
[  8518.964] (--) NVIDIA(0): VideoBIOS: 70.08.c1.00.02
[  8518.964] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  8519.010] (--) NVIDIA(0): Valid display device(s) on Quadro 600 at PCI:3:0:0
[  8519.010] (--) NVIDIA(0):     CRT-0
[  8519.010] (--) NVIDIA(0):     DELL P2414H (DFP-0) (boot, connected)
[  8519.010] (--) NVIDIA(0):     DFP-1
[  8519.010] (--) NVIDIA(0):     DFP-2
[  8519.010] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  8519.010] (--) NVIDIA(0): DELL P2414H (DFP-0): Internal TMDS
[  8519.010] (--) NVIDIA(GPU-0): DELL P2414H (DFP-0): 330.0 MHz maximum pixel clock
[  8519.010] (--) NVIDIA(0): DFP-1: Internal TMDS
[  8519.010] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  8519.010] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[  8519.010] (--) NVIDIA(GPU-0): DFP-2: 480.0 MHz maximum pixel clock
[  8519.010] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  8519.010] (**) NVIDIA(0):     device DELL P2414H (DFP-0) (Using EDID frequencies has
[  8519.010] (**) NVIDIA(0):     been enabled on all display devices.)
[  8519.011] (==) NVIDIA(0):
[  8519.011] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  8519.011] (==) NVIDIA(0):     will be used as the requested mode.
[  8519.011] (==) NVIDIA(0):
[  8519.011] (II) NVIDIA(0): Validated MetaModes:
[  8519.011] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[  8519.011] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[  8519.036] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[  8519.036] (--) NVIDIA(0):     option
[  8519.036] (--) Depth 24 pixmap format is 32 bpp
[  8519.037] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  8519.037] (II) NVIDIA:     access.
[  8519.039] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  8519.039] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  8519.039] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  8519.039] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  8519.039] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  8519.039] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  8519.039] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  8519.039] (II) NVIDIA(0):     Config Options in the README.
[  8519.085] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  8519.125] Loading extension NV-GLX
[  8519.176] (==) NVIDIA(0): Disabling shared memory pixmaps
[  8519.176] (==) NVIDIA(0): Backing store enabled
[  8519.176] (==) NVIDIA(0): Silken mouse enabled
[  8519.176] (==) NVIDIA(0): DPMS enabled
[  8519.176] Loading extension NV-CONTROL
[  8519.177] Loading extension XINERAMA
[  8519.177] (II) Loading sub module "dri2"
[  8519.177] (II) LoadModule: "dri2"
[  8519.177] (II) Module "dri2" already built-in
[  8519.177] (II) NVIDIA(0): [DRI2] Setup complete
[  8519.177] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  8519.177] (--) RandR disabled
[  8519.181] (II) Initializing extension GLX
[  8519.220] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  8519.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  8519.220] (II) LoadModule: "evdev"
[  8519.220] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  8519.220] (II) Module evdev: vendor="X.Org Foundation"
[  8519.220]    compiled for 1.15.0, module version = 2.8.2
[  8519.220]    Module class: X.Org XInput Driver
[  8519.220]    ABI class: X.Org XInput driver, version 20.0
[  8519.220] (II) Using input driver 'evdev' for 'Power Button'
[  8519.220] (**) Power Button: always reports core events
[  8519.220] (**) evdev: Power Button: Device: "/dev/input/event1"
[  8519.220] (--) evdev: Power Button: Vendor 0 Product 0x1
[  8519.220] (--) evdev: Power Button: Found keys
[  8519.220] (II) evdev: Power Button: Configuring as keyboard
[  8519.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  8519.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  8519.220] (**) Option "xkb_rules" "evdev"
[  8519.220] (**) Option "xkb_model" "pc104"
[  8519.220] (**) Option "xkb_layout" "us"
[  8519.252] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  8519.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  8519.252] (II) Using input driver 'evdev' for 'Power Button'
[  8519.252] (**) Power Button: always reports core events
[  8519.252] (**) evdev: Power Button: Device: "/dev/input/event0"
[  8519.252] (--) evdev: Power Button: Vendor 0 Product 0x1
[  8519.252] (--) evdev: Power Button: Found keys
[  8519.252] (II) evdev: Power Button: Configuring as keyboard
[  8519.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  8519.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  8519.252] (**) Option "xkb_rules" "evdev"
[  8519.252] (**) Option "xkb_model" "pc104"
[  8519.252] (**) Option "xkb_layout" "us"
[  8519.252] (II) config/udev: Adding drm device (/dev/dri/card0)
[  8519.252] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event3)
[  8519.252] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  8519.252] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[  8519.252] (**) Logitech Logitech USB Keyboard: always reports core events
[  8519.252] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event3"
[  8519.252] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc30f
[  8519.252] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[  8519.252] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[  8519.252] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.0/0003:046D:C30F.0001/input/input5/event3"
[  8519.252] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 8)
[  8519.252] (**) Option "xkb_rules" "evdev"
[  8519.252] (**) Option "xkb_model" "pc104"
[  8519.252] (**) Option "xkb_layout" "us"
[  8519.253] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event4)
[  8519.253] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  8519.253] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[  8519.253] (**) Logitech Logitech USB Keyboard: always reports core events
[  8519.253] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event4"
[  8519.253] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc30f
[  8519.253] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[  8519.253] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[  8519.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.1/0003:046D:C30F.0002/input/input6/event4"
[  8519.253] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 9)
[  8519.253] (**) Option "xkb_rules" "evdev"
[  8519.253] (**) Option "xkb_model" "pc104"
[  8519.253] (**) Option "xkb_layout" "us"
[  8519.253] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[  8519.253] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  8519.253] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  8519.253] (**) AT Translated Set 2 keyboard: always reports core events
[  8519.253] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[  8519.253] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  8519.253] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  8519.253] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  8519.253] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[  8519.253] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  8519.253] (**) Option "xkb_rules" "evdev"
[  8519.253] (**) Option "xkb_model" "pc104"
[  8519.253] (**) Option "xkb_layout" "us"
[  8519.253] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[  8519.253] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[  8519.254] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[  8519.254] (**) PS/2 Generic Mouse: always reports core events
[  8519.254] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6"
[  8519.254] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[  8519.254] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[  8519.254] (--) evdev: PS/2 Generic Mouse: Found relative axes
[  8519.254] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[  8519.254] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[  8519.254] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[  8519.254] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  8519.254] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event6"
[  8519.254] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[  8519.254] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[  8519.254] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[  8519.254] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[  8519.254] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[  8519.254] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[  8519.254] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[  8519.254] (II) No input driver specified, ignoring this device.
[  8519.254] (II) This device may have been added with another device file.
[  8816.960] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[  8816.960] (II) No input driver specified, ignoring this device.
[  8816.960] (II) This device may have been added with another device file.
[  8816.960] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[  8816.960] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[  8816.960] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[  8816.960] (**) Logitech USB Optical Mouse: always reports core events
[  8816.960] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
[  8816.960] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[  8816.960] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[  8816.960] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[  8816.960] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[  8816.960] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[  8816.960] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[  8816.960] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[  8816.960] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[  8816.960] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  8816.961] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:046D:C05A.000C/input/input16/event5"
[  8816.961] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[  8816.961] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[  8816.961] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[  8816.961] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[  8816.961] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[  8816.961] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[  8817.367] (II) evdev: Logitech USB Optical Mouse: Close
[  8817.367] (II) UnloadModule: "evdev"
[  8817.367] (II) evdev: PS/2 Generic Mouse: Close
[  8817.367] (II) UnloadModule: "evdev"
[  8817.367] (II) evdev: AT Translated Set 2 keyboard: Close
[  8817.367] (II) UnloadModule: "evdev"
[  8817.367] (II) evdev: Logitech Logitech USB Keyboard: Close
[  8817.367] (II) UnloadModule: "evdev"
[  8817.367] (II) evdev: Logitech Logitech USB Keyboard: Close
[  8817.367] (II) UnloadModule: "evdev"
[  8817.367] (II) evdev: Power Button: Close
[  8817.368] (II) UnloadModule: "evdev"
[  8817.368] (II) evdev: Power Button: Close
[  8817.368] (II) UnloadModule: "evdev"
[  8818.023] (II) NVIDIA(GPU-0): Deleting GPU-0
[  8818.216] (EE) Server terminated successfully (0). Closing log file.

_________________
I am linux fan.
Back to top
View user's profile Send private message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 7:35 pm    Post subject: glxinfo from root Reply with quote

From other thread, that said, I can't run glxinfo as root.
Tried user, it complains same error.

Code:
rorocui@anima ~ $ glxinfo
Error: unable to open display

_________________
I am linux fan.
Back to top
View user's profile Send private message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 8:41 pm    Post subject: xterm Reply with quote

hi, All

Just test xterm works fine, so I suspect the gnome has some problem.

thanks.

roro
_________________
I am linux fan.
Back to top
View user's profile Send private message
robearro
n00b
n00b


Joined: 13 Nov 2014
Posts: 6
Location: United States

PostPosted: Thu Nov 13, 2014 9:03 pm    Post subject: Fixed, Reply with quote

I did two changes, not sure which helps or both.

1. remove the gnome-session branding from package.use.

Code:
gnome-base/gnome-session branding


2. apply the nvidia configuration tool to generate xorg.conf

then that works.

Wow.


roro
_________________
I am linux fan.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum