View previous topic :: View next topic |
Author |
Message |
valinor n00b
Joined: 13 Nov 2014 Posts: 3
|
Posted: Thu Nov 13, 2014 1:44 pm Post subject: IPv6d oes not start at system startup [solved] |
|
|
Hello
I've got a strange problem.
When booting the system, network interface is not assigned ipv6 addresses (but default link-local fe80::).
After the system boot, I just call '/etc/init.d/net.enp2s0 restart', and it is corrected.
What can be wrong during the system startup?
This is my /etc/conf.d/net
Code: | dns_servers="172.30.1.1 127.0.0.1 212.49.103.2 212.49.118.2
2a02:17d0:8001:100::53
2a02:17d0:8001:200::53"
config_enp2s0="172.30.30.10/24
2a02:17d0:d8:8aff::1:1/64
fd00:1234:0:ff::1:1/64"
routes_enp2s0="default via 172.30.30.1
default via 2a02:17d0:d8:8aff::1"
|
The following is dmesg tail.
Just after system boot:
Code: | [ 13.611302] r8169 0000:02:00.0 enp2s0: link down
[ 13.611314] r8169 0000:02:00.0 enp2s0: link down
[ 14.003691] NET: Registered protocol family 10
[ 14.003871] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 14.027072] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.072483] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.522108] r8169 0000:02:00.0 enp2s0: link up
[ 15.522120] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
|
After net.enp2s0 restart:
Code: | [ 50.121308] r8169 0000:02:00.0 enp2s0: link down
[ 50.121325] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 50.121333] r8169 0000:02:00.0 enp2s0: link down
[ 51.992563] r8169 0000:02:00.0 enp2s0: link up
[ 51.992573] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
|
Last edited by valinor on Thu Nov 13, 2014 3:56 pm; edited 1 time in total |
|
Back to top |
|
|
valinor n00b
Joined: 13 Nov 2014 Posts: 3
|
Posted: Thu Nov 13, 2014 3:56 pm Post subject: |
|
|
Found it. Sorry for panic )
The link to /etc/init.d/net.enp2s0 was in 'boot' runlevel, instead of 'default'.
Moving symlink to /etc/runlevels/default solved the problem |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|