| View previous topic :: View next topic |
| Author |
Message |
gaurav712
n00b
Joined: 12 Jan 2019
Posts: 24
Location: India
|
 Posted: Mon May 20, 2019 3:31 am Post subject: [SOLVED] Can't load driver |
 |
|
My dmesg says :
| Code: | [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.37-gentoo root=UUID=bda16273-fc1d-4b10-be26-9e14bde5064b ro quiet acpi_osi=Linux acpi_backlight=vendor pcie_aspm=force i915.i915_enable_rc6=1 i915.lvds_downclock elevator=noop vt.default_utf8=0
[ 0.364805] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.37-gentoo root=UUID=bda16273-fc1d-4b10-be26-9e14bde5064b ro quiet acpi_osi=Linux acpi_backlight=vendor pcie_aspm=force i915.i915_enable_rc6=1 i915.lvds_downclock elevator=noop vt.default_utf8=0
[ 1.133244] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.133677] i915 0000:00:02.0: Direct firmware load for i915/glk_dmc_ver1_04.bin failed with error -2
[ 1.133682] i915 0000:00:02.0: Failed to load DMC firmware i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
[ 1.133684] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 1.159370] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 2.381332] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
I think this says I can't load the driver :
| Code: | | [ 1.133677] i915 0000:00:02.0: Direct firmware load for i915/glk_dmc_ver1_04.bin failed with error -2 |
But this one contradicts that :
| Code: | | [ 1.159370] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 |
What's actually happening here?
And one more thing. Am I using the right driver? I have Pentium N5000 with UHD 605. It belongs to geminilake so I thought "glk" in | Code: | | i915/glk_dmc_ver1_04.bin |
says "Geminilake". Is that right?
Here's my full dmesg just in case : https://pastebin.com/EZFfSVzC
Last edited by gaurav712 on Mon May 20, 2019 11:25 am; edited 1 time in total |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Mon May 20, 2019 9:38 am Post subject: |
|
|
gaurav712,
You have i915 built into your kernel. It needs i915/glk_dmc_ver1_04.bin available when it starts, so it needs to be in the kernel binary too.
With the firmware missing, you have missing functionality. | Code: | | Disabling runtime power management. |
at least.
Only part of the driver loaded. Its enough to get an image on the screen.
| Code: | | [ 4.202874] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) |
That is root being mounted read only. At that time, /lib/firmware can be read but its too late, i915 has already initialised.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
