Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
xdm and xdmcp
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
aleskandro
n00b
n00b


Joined: 05 Sep 2012
Posts: 13

PostPosted: Tue Oct 07, 2014 8:11 am    Post subject: xdm and xdmcp Reply with quote

Hi, i'm trying to configure xdm as xdmcp server in a vps server.
I installed xdm and some software like xterm and fluxbox in the server.
This is /etc/X11/xdm/xdm-config
Code:
DisplayManager.authDir: /var/lib/xdm
DisplayManager.errorLogFile:    /var/log/xdm.log
DisplayManager.pidFile:         /var/run/xdm.pid
DisplayManager.keyFile:         /etc/X11/xdm/xdm-keys
DisplayManager.servers:         /etc/X11/xdm/Xservers
DisplayManager.accessFile:      /etc/X11/xdm/Xaccess
DisplayManager*resources:       /etc/X11/xdm/Xresources
DisplayManager.willing:         su nobody -s /bin/sh -c /usr/lib64/X11/xdm/Xwilling
! All displays should use authorization, but we cannot be sure
! X terminals may not be configured that way, so they will require
! individual resource settings.
DisplayManager*authorize:       true
!
DisplayManager*chooser:         /usr/lib64/X11/xdm/chooser
DisplayManager*startup:         /usr/lib64/X11/xdm/Xstartup
DisplayManager*session:         /usr/lib64/X11/xdm/Xsession
DisplayManager*reset:           /usr/lib64/X11/xdm/Xreset
DisplayManager*authComplain:    true
! The following three resources set up display :0 as the console.
DisplayManager._0.setup:        /usr/lib64/X11/xdm/Xsetup_0
DisplayManager._0.startup:      /usr/lib64/X11/xdm/GiveConsole
DisplayManager._0.reset:        /usr/lib64/X11/xdm/TakeConsole

DisplayManager*loginmoveInterval:       10

! SECURITY: do not listen for XDMCP or Chooser requests
! Comment out this line if you want to manage X terminals with xdm
!DisplayManager.requestPort:    0

And this is /etc/X11/xdm/Xaccess
Code:
#
# Access control file for XDMCP connections
#
# To control Direct and Broadcast access:
#
#       pattern
#
# To control Indirect queries:
#
#       pattern         list of hostnames and/or macros ...
#
# To use the chooser:
#
#       pattern         CHOOSER BROADCAST
#
# or
#
#       pattern         CHOOSER list of hostnames and/or macros ...
#
# To define macros:
#
#       %name           list of hosts ...
#
# To control which addresses xdm listens for requests on:
#
#       LISTEN          address [list of multicast groups ... ]
#
# The first form tells xdm which displays to respond to itself.
# The second form tells xdm to forward indirect queries from hosts matching
# the specified pattern to the indicated list of hosts.
# The third form tells xdm to handle indirect queries using the chooser;
# the chooser is directed to send its own queries out via the broadcast
# address and display the results on the terminal.
# The fourth form is similar to the third, except instead of using the
# broadcast address, it sends DirectQuerys to each of the hosts in the list
# The fifth form tells xdm which addresses to listen for incoming connections
# on.  If present, xdm will only listen for connections on the specified
# interfaces and/or multicast groups.
#
# In all cases, xdm uses the first entry which matches the terminal;
# for IndirectQuery messages only entries with right hand sides can
# match, for Direct and Broadcast Query messages, only entries without
# right hand sides can match.
#

*                                       #any host can get a login window

#
# To hardwire a specific terminal to a specific host, you can
# leave the terminal sending indirect queries to this host, and
# use an entry of the form:
#

#terminal-a     host-a


#
# The nicest way to run the chooser is to just ask it to broadcast
# requests to the network - that way new hosts show up automatically.
# Sometimes, however, the chooser can't figure out how to broadcast,
# so this may not work in all environments.
#

#*              CHOOSER BROADCAST       #any indirect host can get a chooser

#
# If you'd prefer to configure the set of hosts each terminal sees,
# then just uncomment these lines (and comment the CHOOSER line above)
# and edit the %hostlist line as appropriate
#

#%hostlist      host-a host-b

#*              CHOOSER %hostlist       #

#
# If you have a machine with multiple network interfaces or IP addresses
# you can control which interfaces accept XDMCP packets by listing a LISTEN
# line for each interface you want to listen on.  You can additionally list
# one or more multicast groups after each address to listen on those groups
# on that address.
#
# If no LISTEN is specified, the default is the same as "LISTEN *" - listen on
# all unicast interfaces, but not for multicast packets.  If any LISTEN lines
# are specified, then only the listed interfaces will be listened on.
#
# IANA has assigned FF0X:0:0:0:0:0:0:12B as the permanently assigned
# multicast addresses for XDMCP, where X in the prefix may be replaced
# by any valid scope identifier, such as 1 for Node-Local, 2 for Link-Local,
# 5 for Site-Local, and so on.  The default is equivalent to the example shown
# here using the Link-Local version to most closely match the old IPv4 subnet
# broadcast behavior.
#
# LISTEN                * ff02:0:0:0:0:0:0:12b

# This example shows listening for multicast on all scopes up to site-local
#
# LISTEN        * ff01:0:0:0:0:0:0:12b ff02:0:0:0:0:0:0:12b ff03:0:0:0:0:0:0:12b ff04:0:0:0:0:0:0:12b ff05:0:0:0:0:0:0:12b


So I started /etc/init.d/xdm from server and trying to connect from a client with Xnest -query myserver.tld :1, I have this error:
Code:
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
(EE)
Fatal server error:
(EE) (EE) BUG: triggered 'if (f[f_idx])'
(EE) BUG: /tmp/portage/x11-base/xorg-server-1.15.0/work/xorg-server-1.15.0/os/log.c:467 in pnprintf()
(EE) Unsupported printf directive '*'
(EE)
(EE) Backtrace:
(EE) 0: Xnest (xorg_backtrace+0x40) [0x508130]
(EE) 1: Xnest (LogVMessageVerbSigSafe+0x818) [0x512df8]
(EE) 2: Xnest (FatalError+0xd3) [0x513023]
(EE) 3: Xnest (0x400000+0x1154c1) [0x5154c1]
(EE) 4: Xnest (0x400000+0x1156cd) [0x5156cd]
(EE) 5: Xnest (WakeupHandler+0x67) [0x4d9f07]
(EE) 6: Xnest (WaitForSomething+0x1a4) [0x505d04]
(EE) 7: Xnest (0x400000+0xd5351) [0x4d5351]
(EE) 8: Xnest (0x400000+0xd938a) [0x4d938a]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7feaa1be2db5]
(EE) 10: Xnest (0x400000+0x1d5a1) [0x41d5a1]
(EE)
XDMCP fatal error: Session failed %*.*s
(EE)



Where am I doing wrong?
Back to top
View user's profile Send private message
katfish
Tux's lil' helper
Tux's lil' helper


Joined: 14 Nov 2011
Posts: 147

PostPosted: Mon Nov 03, 2014 9:47 pm    Post subject: Reply with quote

I cant help you with that issue.
However, did you ever try x2go?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum