View previous topic :: View next topic |
Author |
Message |
johnnynieh n00b
Joined: 25 Mar 2004 Posts: 5
|
Posted: Fri Mar 26, 2004 4:44 am Post subject: Hardware Compatibility? |
|
|
Silly Question, for my Ultra 5/360 IIi, can I just go out to BestBuy or CompUSA or somewhere retailer store to buy *any* EIDE hdd and replace the hard drive to my will? is there any compatibility issue? |
|
Back to top |
|
|
Weeve Retired Dev
Joined: 30 Oct 2002 Posts: 641
|
Posted: Fri Mar 26, 2004 6:16 am Post subject: |
|
|
It should work fine. I'm not sure if there is a size limitation at all, but I don't believe so. Several users and a couple developers have replaced the default IDE drives. Just keep in mind that the IDE controller in a U5 is UMDA33, and you're lucky to get those rates on a good day. |
|
Back to top |
|
|
Mark Clegg Apprentice
Joined: 05 Jan 2004 Posts: 270 Location: ZZ9 Plural Z Alpha
|
Posted: Fri Mar 26, 2004 8:50 am Post subject: |
|
|
Worked fine for me, you just have to remember to zap the MS-DOS partition table if it' got one and put a Sun disklabel on instead.
eg.
dd if=/dev/zero of=/dev/hd? bs=1k count=1
fdisk /dev/hd? |
|
Back to top |
|
|
ciaranm Retired Dev
Joined: 19 Jul 2003 Posts: 1719 Location: In Hiding
|
Posted: Fri Mar 26, 2004 11:48 pm Post subject: |
|
|
There is a limit, but it's somewhere over the 100GByte mark...
[edit]M? uh, G...[/edit] |
|
Back to top |
|
|
bazik Retired Dev
Joined: 22 Jul 2002 Posts: 277 Location: Behind you.
|
Posted: Sun Mar 28, 2004 2:03 am Post subject: |
|
|
ciaranm wrote: | There is a limit, but it's somewhere over the 100GByte mark...
[edit]M? uh, G...[/edit] |
AFAIK the limit is 137GB on x86. I had a 120GB disk in my U5 but I didnt try larger. But the limit on x86 is due to 32bit addresses which should not exist in the 64bit OBP (IMO). _________________ Gentoo Linux/Sparc Developer
http://dev.gentoo.org/~bazik/ |
|
Back to top |
|
|
GenTimJS Guru
Joined: 03 May 2003 Posts: 406 Location: NH, USA
|
Posted: Sun Mar 28, 2004 4:43 pm Post subject: disk label failures |
|
|
Dont be so quick to rush out...
I have an ultra5 and have a non-original hard disk, which is of the same type as one of the models originally shipped with the ultra5.
Linux is nice and happy with "any" disks I toss in it and label (so far)
however....
solaris will eat you alive.... I've spent days, nay weeks, and have yet to get solaris to either A) read a linux-created disk label, or B) correctly label a drive on its own (i know how to use the solaris FORMAT command).
I dont know if this experience differs much in SCSI systems, though I know in my ultra1 I had no problem at all making solaris and linux see/use the same drives pretty much "first try"
So just be carefull what you want to do with the drive before you go spend cash on one. _________________ -Tim Smith |
|
Back to top |
|
|
bazik Retired Dev
Joined: 22 Jul 2002 Posts: 277 Location: Behind you.
|
Posted: Sun Mar 28, 2004 4:59 pm Post subject: Re: disk label failures |
|
|
GenTimJS wrote: | solaris will eat you alive.... I've spent days, nay weeks, and have yet to get solaris to either A) read a linux-created disk label, or B) correctly label a drive on its own (i know how to use the solaris FORMAT command).
|
Heh sorry, I personally dont even *think* of using Solaris on any of my Sparcs _________________ Gentoo Linux/Sparc Developer
http://dev.gentoo.org/~bazik/ |
|
Back to top |
|
|
GenTimJS Guru
Joined: 03 May 2003 Posts: 406 Location: NH, USA
|
Posted: Sun Mar 28, 2004 5:02 pm Post subject: slowaris |
|
|
I normally wouldnt either. however my job (consultant) requires that I maintain solaris proficiency and not "get rusty" ... but man, am I rusty .... lol _________________ -Tim Smith |
|
Back to top |
|
|
|