| View previous topic :: View next topic |
| Author |
Message |
picarica
Guru
Joined: 11 Aug 2018
Posts: 354
|
 Posted: Fri Apr 04, 2025 6:34 pm Post subject: how to capture GPU crash? and other issues |
 |
|
sooo i got new GPU intel arc one, but weird things have been happening, like sometimes when i turn on my PC one monitor does not turn on, i have to remove power from my PC wait for like a minute and then my second monitor works.
then i have been running ollama, SD and alot of these type of stuff, blender etc, on my GPu and sometimes i run stuff for hours, but sometimes my whole system freezes like its unresponsive, cant even enter shell, i have to fully reboot and i wonder why does this happen, is it driver issue? is my GPU faulty? or my power supply? how can i catch a trace of this happening? my dmesg is cleared out after reboot, what tools do you guys use for this? |
|
| Back to top |
|
 |
freke
Veteran
Joined: 23 Jan 2003
Posts: 1076
Location: Somewhere in Denmark
|
| Posted: Fri Apr 04, 2025 8:19 pm Post subject: Re: how to capture GPU crash? and other issues |
|
|
| picarica wrote: | | sooo i got new GPU intel arc one, but weird things have been happening, like sometimes when i turn on my PC one monitor does not turn on, i have to remove power from my PC wait for like a minute and then my second monitor works. |
Using DP?
I have had similar troubles/problems with other hardware, IIRC it was something to do with DP-cables not being following spec, monitor not being turned properly off due to some power being fed from computer to monitor through DP-cable.
I had to try different cables until I found some that worked properly.
I also seem to recal we had a similar problem at work - which was fixed with a firmware update (for some nVidia-card IIRC) |
|
| Back to top |
|
|
picarica
Guru
Joined: 11 Aug 2018
Posts: 354
|
| Posted: Sun Apr 06, 2025 9:33 am Post subject: Re: how to capture GPU crash? and other issues |
|
|
| freke wrote: | | picarica wrote: | | sooo i got new GPU intel arc one, but weird things have been happening, like sometimes when i turn on my PC one monitor does not turn on, i have to remove power from my PC wait for like a minute and then my second monitor works. |
Using DP?
I have had similar troubles/problems with other hardware, IIRC it was something to do with DP-cables not being following spec, monitor not being turned properly off due to some power being fed from computer to monitor through DP-cable.
I had to try different cables until I found some that worked properly.
I also seem to recal we had a similar problem at work - which was fixed with a firmware update (for some nVidia-card IIRC) |
ye using DP my gpu has only 1 HDMI :/ , and its even from DP to DVI :D so i guess that could be issue, but its been fine with my previous gpu which is why i thought gpu was at fault, but its true this new gpu has newer DP standart |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Other Things Gentoo
